4 Material und Umwelt
Filtern
Dokumenttyp
- Zeitschriftenartikel (263) (entfernen)
Sprache
- Englisch (263) (entfernen)
Referierte Publikation
- ja (263) (entfernen)
Schlagworte
- Leaching (14)
- Biocides (10)
- Phosphorus (9)
- Sewage sludge (9)
- Bacteria (8)
- Antimicrobial resistance (6)
- Biofilm (6)
- Bottom ash (6)
- Circular economy (6)
- Construction products (6)
- Biofilms (5)
- Black fungi (5)
- DRIFTS (5)
- Ectoine (5)
- Fungi (5)
- Thermal desorption (5)
- Degradation (4)
- Fertilizer (4)
- Gas chromatography (4)
- Non-invasive analysis (4)
- Phosphorus recovery (4)
- Polyethylene (4)
- Raman spectroscopy (4)
- Reverse glass painting (4)
- VOC (4)
- Wastewater (4)
- X-ray absorption near-edge structure (XANES) spectroscopy (4)
- XANES spectroscopy (4)
- Archaeometry (3)
- Bio-weathering (3)
- Biodeterioration (3)
- Corrosion (3)
- DHN melanin (3)
- Diffusive gradients in thin films (DGT) (3)
- Disinfection (3)
- Ecotoxicity (3)
- Emission test chamber (3)
- Evolution (3)
- Fertilzer (3)
- Geosynthetics (3)
- Geotextiles (3)
- Incineration bottom ash (3)
- Indoor air quality (3)
- Interlaboratory comparison (3)
- Knufia petricola (3)
- NAP-XPS (3)
- Osmoadaptation (3)
- PFAS (3)
- Papyrus (3)
- Pathogen (3)
- Phosphorus fertilizer (3)
- Renewable Energy, Sustainability and the Environment (3)
- Scandium (3)
- Sewage sludge ash (3)
- Soil (3)
- Standardisation (3)
- Struvite (3)
- TXRF (3)
- Termite (3)
- Thermal treatment (3)
- Ultrafine particles (3)
- VVOC (3)
- Volatile organic compounds (3)
- Wood Protection (3)
- Wood protection (3)
- Aerosol (2)
- Air pollution (2)
- Air quality monitoring (2)
- Air sampling (2)
- Analytical methods (2)
- Atomic and Molecular Physics and Optics (2)
- Bacterial adhesion (2)
- Biocorrosion (2)
- Bioinformatics (2)
- Bioreceptivity (2)
- Building and Construction (2)
- CRISPR/Cas9 (2)
- Cannibalism (2)
- Cascade impactor (2)
- Combustion ion chromatography (2)
- Combustion ion chromatography (CIC) (2)
- Condensed Matter Physics (2)
- Coptic (2)
- DNA (2)
- Design of experiments (2)
- Emission (2)
- Energy Engineering and Power Technology (2)
- Entomopathogen (2)
- Environment (2)
- Extracellular polymeric substances (2)
- Extractable organically bound fluorine (EOF) (2)
- Fluoride (2)
- Forsterite (2)
- Fuel Technology (2)
- Fungus (2)
- Gut microbiota (2)
- Halomonas elongata (2)
- High resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) (2)
- Horizontal gene transfer (2)
- ICP-MS (2)
- ISO 16000-6 (2)
- Immunity (2)
- Insect biotechnology (2)
- Isoptera (2)
- Keratin (2)
- Laser processing (2)
- Laser-induced periodic surface structures (LIPSS) (2)
- Leaching control mechanisms (2)
- Leaching tests (2)
- MIC (2)
- MOF (2)
- Magnesium (2)
- Manuscripts (2)
- Marine littering (2)
- Mechanochemistry (2)
- Melting experiments (2)
- Metabolomics (2)
- Method development (2)
- Microbiologically influenced corrosion (2)
- Microbiota (2)
- Micropatterning (2)
- Microplastic (2)
- Mixed ink (2)
- NanoSIMS (2)
- Nosema ceranae (2)
- Osmia bicornis (2)
- Particles (2)
- Passive sampling (2)
- Per- and polyfluoroalkyl substances (PFAS) (2)
- Pigment (2)
- Pigment identification (2)
- Polyglycerol (2)
- Pseudomonas aeruginosa (2)
- Recycling (2)
- Recycling fertilizer (2)
- Reference material (2)
- Social (2)
- Substance release (2)
- Symbiosis (2)
- Termites (2)
- Tineola bisselliella (2)
- Transcriptomics (2)
- Transformation (2)
- Virology (2)
- Virulence (2)
- Waste-to-energy (2)
- Weathering (2)
- Wild bees (2)
- X-ray diffraction (2)
- XANES (2)
- XPS (2)
- (Semi)arid to humid-temperate natural ecosys (1)
- 13CO2 pulse labeling (1)
- 16S rRNA gene (1)
- 3D printer (1)
- 3D printing (1)
- A key interface (1)
- A-DNA conformation (1)
- AEROMET II (1)
- AEROMET project (1)
- Accelerated aging (1)
- Accuracy (1)
- Adaptation (1)
- Adaption (1)
- Additive Manufacturing (1)
- Adipokinetic hormone (1)
- Adipokinetic hormone receptor (1)
- Adsorbable organically bound fluorine (AOF) (1)
- Advanced groups of termites (1)
- Aerodynamic levitation (1)
- Aerosol gravimetry (1)
- Aerosol measurement instruments (1)
- Aerosols (1)
- Aerosolsensor (1)
- Affinity chromatography (1)
- Ag-LDI-MS (1)
- Aging (1)
- Aging tests (1)
- Agricultural mycology (1)
- Agronomic performance (1)
- Air analysis (1)
- Air pollution control (1)
- Alexander von Humboldt (1)
- Alkylating agents (1)
- Ambient aerosols (1)
- Ammonium (1)
- Amphiphilic polymer (1)
- Amplicon sequencing (1)
- Anaerobic pathways (1)
- Analytical Chemistry (1)
- Analytical screening techniques (1)
- Animal immune system (1)
- Anobium punctatum (1)
- Antagonism (1)
- Antibacterial (1)
- Antibacterial coatings (1)
- Antibacterial polymer (1)
- Antibacterial surfaces (1)
- Antibiotic resistance (1)
- Antibiotics (1)
- Antibodies (1)
- Antifouling (1)
- Antimicrobial (1)
- Antimicrobial coating (1)
- Antimicrobial materials (1)
- Antimicrobial surfaces (1)
- Antimicrobial test (1)
- Antimicrobial testing (1)
- Antimicrobials (1)
- Antimony (1)
- Antiseptic agents (1)
- Aquatic fungi (1)
- Aqueous synthesis (1)
- Arbuscular mycorrhiza (1)
- Archaea (1)
- Architecture (1)
- Artificial ageing (1)
- Artificial weathering (1)
- Ascosphaera apis (1)
- AshDec (1)
- Aspergillus (1)
- Assessment (1)
- Astrobiology (1)
- Automated analysis (1)
- BEMMA (1)
- BESSY (1)
- BODIPY (1)
- BOFS (1)
- BTEX (1)
- Bacillus subtilis (1)
- Bacterial attachment (1)
- Bacterial cell cycle (1)
- Bacterial second messenger (1)
- Basidiomycetes (1)
- Bassanite (1)
- Batch tests (1)
- Bathyarchaeia (1)
- Bauxite Residue (1)
- Bauxite residue (1)
- Bawit (1)
- Bee diseases (1)
- Bee health (1)
- Behavioural mechanisms (1)
- Beneficial microbes (1)
- Beschichtung (1)
- Bio-based insulation (1)
- Bioceramics (1)
- Biocide tolerance (1)
- Biodeterioration and biodegradation (1)
- Biofilm formation (1)
- Biofilm quantification (1)
- Biofouling (1)
- Biogenic weathering (1)
- Bioinformatics virology viruses software (1)
- Biokorrosion (1)
- Biological pest control (1)
- Biomimetic (1)
- Biosynthesis (1)
- Biotests (1)
- Biotic environment (1)
- Biphasic growth (1)
- Black microcolonial fungi (1)
- Black writing ink (1)
- Blast-furnace sludge (1)
- Blattodea (1)
- Botrytis cinerea (1)
- Brown-rot fungi (1)
- Building Material (1)
- Building materials (1)
- Built environment (1)
- Bushveld Complex (1)
- C-di-GMP (1)
- CCQM (1)
- CEC-L-103 (1)
- CHC (1)
- COST action CA15114 AMICI (1)
- CPC calibration (1)
- CaNaPO4 (1)
- Calcium alkali phosphate (1)
- Calcium carbonate (1)
- Calcium silicate (1)
- Calcium sulfate (1)
- Calibration transfer (1)
- Carbon ink (1)
- Carbon steel (1)
- Carbon steel corrosion (1)
- Cell appendages (1)
- Cell studies (1)
- Cell-envelope (1)
- Cellulose ether (1)
- Cellulose synthase (1)
- Cerium oxide (1)
- Characterisation (1)
- Chemical analysis (1)
- Chemical durability (1)
- Chemical ecology (1)
- Chemical extraction (1)
- Chemical extraction methods (1)
- Chemical recycling (1)
- Chemicals (1)
- Chicken manure ash (1)
- Chilean Coastal Cordillera (1)
- Chlorine (1)
- Chromitites (1)
- Circular Economy (1)
- Clean steel (1)
- Cleridae (1)
- Climate gradient (1)
- Cloning vectors (1)
- Close proximity to colonies (1)
- Cobalt (1)
- Cockroach (1)
- Cockroaches (1)
- Codex (1)
- Cognitive performance (1)
- Coleoptera (1)
- Colored glasses (1)
- Colourants (1)
- Combustion and gasification (1)
- Community composition (1)
- Community-level interactions (1)
- Comparison (1)
- Compatible solute (1)
- Comsumer good samples (1)
- Concept (1)
- Concrete (1)
- Confocal microscopy (1)
- Conjugate (1)
- Conjugation (1)
- Conservation (1)
- Construction materials (1)
- Construction product (1)
- Construction products regulation (CPR) (1)
- Consumer products (1)
- Contamination (1)
- Contraction (1)
- Control (1)
- Copper-based wood preservatives (1)
- Coptic manuscripts (1)
- Corundum (1)
- Critical raw materials (1)
- Cross-feeding (1)
- Cross-resistance (1)
- Cross-sectioning (1)
- Cryo XPS (1)
- Cryptoendolithism (1)
- Crystalline phase identification (1)
- Crystallization (1)
- CuNPs (1)
- Cultural heritage (1)
- Cupriavidus campinensis (1)
- Cuticular hydrocarbons (1)
- Cyanobacteria (1)
- DNA polymerase (1)
- DSM 5009 (1)
- Dead Sea Scrolls (1)
- Decomposition point (1)
- Degradable polymer (1)
- Dendrimer (1)
- Denitrification (1)
- Density separation (1)
- Desert ecology (1)
- Developing building materials (1)
- Dielectric heating (1)
- Dietary adaptation (1)
- Differential expression (1)
- Diffractive gratings (1)
- Diffusive Gradients in Thin-films (DGT) (1)
- Diffusive Gradients in thin films (DGT) (1)
- Diffusive gradients in thin-films (DGT) (1)
- Direct laser writing (1)
- Disinfection Fuel (1)
- Disposal (1)
- Diversity (1)
- Dothideomycetes (1)
- Draft Genome (1)
- Drawings (1)
- Driving rain (1)
- Dry treatment (1)
- Drywood termite (1)
- DsRNA (1)
- Dye (1)
- Dynamic calibration gas mixtures (1)
- Dynamic surface leaching test (1)
- E. coli (1)
- EAF slags (1)
- EN 717-3 (1)
- Earthen building materials (1)
- Ecotoxicity tests (1)
- Ecotoxicological tests (1)
- Ecotoxixity (1)
- Efficacy (1)
- Egypt (1)
- Electric arc furnace (EAF) slags (1)
- Electric arc furnace dust (1)
- Electric arc furnace slags (1)
- Electron microscopy (1)
- Electronic (1)
- Element mass concentration (1)
- Elemental aerosol analysis (1)
- Elemental composition (1)
- Eluates (1)
- Emission chamber (1)
- Emission test method (1)
- Emission testing (1)
- Enamels (1)
- Entomopathogenic Fungus (1)
- Entropy (1)
- Environmental Chemistry (1)
- Environmental Engineering (1)
- Environmental assessment (1)
- Environmental conditions (1)
- Environmental evaluation (1)
- Environmental impact (1)
- Environmental simulations (1)
- Epidemal layer (1)
- Eurotiomycetes (1)
- Exocrine gland (1)
- Expansion (1)
- Exposure (1)
- External (1)
- Extracellular enzymes (1)
- Extracellular pH (1)
- Extractable organic fluorine (1)
- Extraction (1)
- Extremophile (1)
- Extremophiles (1)
- F pili (1)
- FAT class concept (1)
- FFF-3D printer (1)
- FFF-3D printing (1)
- FFF-filament (1)
- FFF-printing (1)
- FactSage calculations (1)
- FactSageTM calculations (1)
- Family archives (1)
- Faraday cup aerosol electrometer (1)
- Fatigue (1)
- Fenton-like reaction (1)
- Fire-retardant paint (1)
- Flask method (1)
- Flexible shadow masks (1)
- Flow system (1)
- Fluorescence (1)
- Fluorescence spectroscopy (1)
- Fluorescent microscopy (1)
- Fluorolytic sol-gel synthesis (1)
- Food (1)
- Food fermentation (1)
- Forest fires (1)
- Forest soils (1)
- Formaldehyde (1)
- Formation enthalpy (1)
- Fuel sorption (1)
- Fungal decay (1)
- Fungal stress mechanisms and responses (1)
- Fungiculture (1)
- Fusarium (1)
- GC-FID (1)
- GC-MS (1)
- GDL (1)
- GNBP-2 (1)
- Gas analysis (1)
- Gene expression (1)
- General Chemistry (1)
- General Environmental Science (1)
- General Materials Science (1)
- General Medicine (1)
- Genetics (1)
- Genome (1)
- Genome sequence (1)
- Genomics (1)
- Geology (1)
- Geomembranes (1)
- Global radiation (1)
- Graphene (1)
- Graphene–bacteria interaction (1)
- Green facades (1)
- Groundwater (1)
- Grouts (1)
- Growth-rate homeostasis (1)
- Gut symbionts (1)
- Gypsum (1)
- Gypsum plasterboards (1)
- Gypsum waste (1)
- Halogenation (1)
- Halophilic bacteria (1)
- Hazard properties (1)
- Hazardous waste (1)
- Haze Samples (1)
- Hazenite (1)
- Health, Toxicology and Mutagenesis (1)
- Healthcare (1)
- Heat capacity (1)
- Heat maps (1)
- Heavy metal free (1)
- Heavy metal removal (1)
- Heavy metals (1)
- Hellenistic (1)
- Herbaspirillum seropedicae (1)
- Hermopolis (1)
- High density polyethylene (1)
- History of Art (1)
- Honey bee (1)
- Honeybee (1)
- Hospital premises (1)
- Host and symbiont ecology (1)
- Host immunity (1)
- Hydration products (1)
- Hydrogen storage (1)
- Hydrogenasen (1)
- Hygienic behavior (1)
- Hyperarid (1)
- Hypermutation (1)
- Hypopharynx (1)
- ICP-OES (1)
- IR spectroscopy (1)
- ISO 22196 (1)
- ISO REMCO (1)
- ITS region (1)
- Idiopathic environmental intolerance (1)
- In situ (1)
- In situ synchrotron x-ray diffraction (1)
- In-situ Process Monitoring (1)
- In-situ analysis (1)
- Incubated soil/fertilizer mixtures (1)
- Indirect photolysis (1)
- Indoor Air: Adsorbent performance (1)
- Indoor air (1)
- Indoor mycobiome (1)
- Industrial and Manufacturing Engineering (1)
- Industrial mycology (1)
- Infecting a number of insects, (1)
- Infections (1)
- Infrared spectroscopy (1)
- Infrared thermography (1)
- Ink (1)
- Ink analysis (1)
- Insect evolution (1)
- Insecticide (1)
- Instrumentation (1)
- Inter-comparison (1)
- Inter-lab comparison (1)
- Inter-laboratory test (1)
- Intercomparison (1)
- Interdisciplinarity (1)
- Intraparticle diffusion (1)
- Intumescent coating (1)
- Ionic liquid (1)
- Ir DNA staining approach (1)
- Iron gall ink (1)
- Iron making (1)
- Iron scrap (1)
- Iron-gall ink (1)
- Isotopes (1)
- Issues (1)
- Joint grouts (1)
- Knock-out mutant (1)
- Korynetes caeruleus (1)
- LC-MS/MS (1)
- Laboratory breeding (1)
- Labrum (1)
- Laccase (1)
- Landfill (1)
- Landfill lining (1)
- Laser printer emission (1)
- Laser-induced nanostructures (1)
- Laser-modified surface (1)
- Layer-by-Layer (1)
- Life history data (1)
- Lifetime (1)
- Lignocellulose (1)
- Limit values (1)
- Low melting glasses (1)
- Low-molecular-weight organic substances (1)
- Luftgüte (1)
- Lysimeter (1)
- MSWI bottom ash (1)
- MSWI fly ash (1)
- Major transition (1)
- Marble (1)
- Marek's Disease Virus (1)
- Marek's virus (1)
- Mask fabrication (1)
- Mass spectrometry (1)
- Materials Chemistry (1)
- Mathematical analysis (1)
- Mechanisms of pathogenesis (1)
- Mechanosensitive channel (1)
- Medical mycology (1)
- Melanin (1)
- Melanin Adhesion (1)
- Melting point (1)
- Melting temperature (1)
- Metabolic engineering (1)
- Metabolic flux analysis (1)
- Metabolic modeling (1)
- Metabolism (1)
- Metadata (1)
- Metal recovery (1)
- Metals and Alloys (1)
- Metarhizium (1)
- Metarhizium robertsii DSM 1490 (1)
- Methane (1)
- Methanogen (1)
- Methanogens (1)
- Microbe (1)
- Microbial adhesions (1)
- Microbial simulation, (1)
- Microbially Induced Corrosion (1)
- Microbially induced carbonate precipitation (MICP) (1)
- Microbiological influenced corrosion MIC (1)
- Microchamber (1)
- Microcolonial fungi (1)
- Micromonospora aurantiaca (1)
- Microorganisms (1)
- Microplastics (1)
- Microwaves (1)
- Millipedes (1)
- Mineral (1)
- Mining (1)
- Mixture toxicity (1)
- Model (1)
- Model aerosols (1)
- Modeling (1)
- Modelling studies (1)
- Modified mycotoxins (1)
- Moisture (1)
- Moisture performance (1)
- Molecular Organic Frameworks (1)
- Molecular clock (1)
- Molecular identification (1)
- Molybdenum (1)
- Monoterpene (1)
- MscS (1)
- Mud volcanoe fluids (1)
- Multi-resistant bacteria (1)
- Multi-scale study (1)
- Multicellularity (1)
- Multidisciplinary (1)
- Multiple Displacement Amplification (1)
- Multiple chemical sensitivity (1)
- Multiple lines of evidence (1)
- Multiport (1)
- Municipal sewage sludge (1)
- Mussel-inspired coating (1)
- Mussel-inspired materials (1)
- Mutation rate (1)
- MySpot (1)
- Mycotoxin (1)
- Müllverbrennung (1)
- N and K analog tracer (1)
- NGS (1)
- NIR imaging (1)
- Nano (1)
- Nano Particles (1)
- Nano-Fourier-transform infrared spectroscopy (1)
- Nano-materials (1)
- Nanomaterial (1)
- Nanomaterials (1)
- Nanoparticle (1)
- Nanoparticles (1)
- Nanopowder (1)
- Nanosensor (1)
- Natural durability (1)
- Natural ecosystems (1)
- Near ambient x-ray photoelectron spectroscopy (1)
- Near-infrared refectography (1)
- Neuropeptide (1)
- New exocrine organ (1)
- Next generation sequencing (1)
- Nickel (1)
- Nitrification inhibitor (1)
- Nitrososphaerales (1)
- Nitrous oxide (1)
- Non-destructiv testing (1)
- Non-destructive Materials (1)
- Non-ferrous metals (1)
- Non-invasive (1)
- Non-vitriolic iron-gall inks (1)
- Nonspecific binding (NSB) (1)
- Nonvolatile (1)
- Nostoc punctiforme (1)
- Nutrient (1)
- Nutrient acquisition (1)
- Nutrient cycles (1)
- Nutrient uplift and recyclin (1)
- OECD (1)
- OIT (1)
- Oddy test (1)
- Oil (1)
- Olivine (1)
- One-step ionic liquids synthesis (1)
- Open data (1)
- Optical and Magnetic Materials (1)
- Organic contaminants (1)
- Organic phosphorus breakdown (1)
- Osmotic shock (1)
- Osteogenesis (1)
- Oxide melts (1)
- P sink method (1)
- P speciation (1)
- P-efficiency (1)
- P. Fluorescens (1)
- PM monitors (1)
- PV modules (1)
- Painting (1)
- Particle emission (1)
- Particle size distribution (1)
- Particle synthesis (1)
- Partikel (1)
- Parylene C (1)
- Pathogen spillover (1)
- Pathogen transmission (1)
- Pathogen virulence (1)
- Peptide-derived components (1)
- Per- and Polyfluoroalkyl substances (PFAS) (1)
- Per- and polyfluorinated alkly substances (PFASs) (1)
- Per- and polyfluorinated alkyl substances (PFASs) (1)
- Performance (1)
- Permeability (1)
- Persistence (1)
- Pest control (1)
- Pesticides (1)
- Phase formation (1)
- Phase transformation (1)
- Phenotypic heterogeneity (1)
- Phenotypic variation (1)
- Phoshpor availability (1)
- Phosphate dynamics (1)
- Phosphate extractability and availability (1)
- Phosphorous recovery (1)
- Phosphorus K-edge-XANES spectroscopy (1)
- Phosphorus availability (1)
- Phosphorus elimination (1)
- Phosphorus plant-availability (1)
- Phosphous recovery (1)
- Photodynamic therapy (1)
- Photometric P determination (1)
- Photonics (1)
- Phototrophs (1)
- Phyllosphere (1)
- Pilot comparison (1)
- Plant Experiment (1)
- Plant availability (1)
- Plant economic spectrum (1)
- Plant pathogen (1)
- Plastic degradation (1)
- Plastic waste (1)
- Platinum (1)
- Pollutant (1)
- Pollution (1)
- Polydopamine (1)
- Polyelektrolyt (1)
- Polyethylene terephthalate (1)
- Polyioinic liquid (1)
- Polymer-based products (1)
- Polymerase mutant (1)
- Polypropylene (1)
- Polystyrene (1)
- Polyurethanes (1)
- Porosity (1)
- Pot experiments (1)
- Potential toxic elements (1)
- Probiotic-based vaccines (1)
- Probiotics (1)
- Process Metallurgy (1)
- Process development (1)
- Process upscaling (1)
- Proficiency testing (1)
- Proofreading deficient (1)
- Prospective risk assessment (1)
- Proteome (1)
- Pseudomonas fluorescens (1)
- Pseudomonas veronii (1)
- Ptinidae (1)
- Public Health, Environmental and Occupational Health (1)
- Purification (1)
- Pyrolysis (1)
- Quasispecies (1)
- RNA interference (1)
- RNA-Seq (1)
- RNA-Sequencing (1)
- RNAi (1)
- Radio waves (1)
- Radon (1)
- Radon exhalation (1)
- Raman (1)
- Raman Spectroscopy (1)
- Reactive oxygen species (1)
- Reactor conditions (1)
- Real-time qPCR (1)
- Recovery (1)
- Recovery potential (1)
- Recovery rate (1)
- Recycled gypsum (1)
- Recycled sources (1)
- Red Mud (1)
- Red mud (1)
- Reductive decomposition (1)
- Reductive defluorination (1)
- Reference materials (1)
- Reference method (1)
- Reference organisms (1)
- Reference samples (1)
- Regulation (1)
- Rembrandt (1)
- Remediation (1)
- Resistance model (1)
- Resource Recovery (1)
- Resources (1)
- Reverse paintings on glass (1)
- Rhenanite (1)
- Rhizopus (1)
- Rhizopus and Aspergillus oryzae (1)
- Rhizosphere effect (1)
- Rhizosphere processes (1)
- Rice (1)
- Robustness validation (1)
- Rock biofilm (1)
- Root economics space (1)
- Rostral gland (1)
- Round robin test (1)
- Rround robin test (1)
- Ruthenium (1)
- SEM (1)
- SEM micrography (1)
- SIMS (1)
- SVOC (1)
- Safety (1)
- Salts (1)
- Sample preparation (1)
- Sapphire (1)
- Sc recovery (1)
- Sc-ICP-ToF-MS (1)
- Scanning micro-X-ray fluorescence (1)
- Scattering (1)
- Scattering-type scanning near-field optical microscopy (s-SNOM) (1)
- Scribal corrections (1)
- Secondary P-fertilizer (1)
- Secondary building materials (1)
- Secondary metabolites (1)
- Selective Chlorination (1)
- Selective chlorination (1)
- Selective quantification (1)
- Self-assembled monolayer (1)
- Self-assembled monolayers (SAM) (1)
- Semivolatile organic compounds (1)
- Sensors (1)
- Sequence annotation (1)
- Sewage Sludge (1)
- Sewage Sludge Ashes (1)
- Sewage sludge ash (SSA) (1)
- Sewage sludge disposal (1)
- Short crack propagation (1)
- Silica and polystyrene nanoparticles (1)
- Silicate (1)
- Silicon carbide (1)
- Silver (1)
- Single cell (1)
- Single cell microbiology (1)
- Size exclusion chromatography (1)
- Size resolved chemical composition (1)
- Social Immunity (1)
- Social immunity (1)
- Social insect (1)
- Sociality (1)
- Software (1)
- Soil contact (1)
- Soil incubation study (1)
- Soil-feeding habit (1)
- Soil-like material (1)
- Soils (1)
- Solar panels (1)
- Soldier (1)
- Solid phase extraction (SPE) (1)
- Solid-liquid extraction (1)
- Solid-phase extraction (SPE) (1)
- Solitary bees (1)
- Solute excretion (1)
- Solvents (1)
- Solvolysis (1)
- Sorption (1)
- Spectroscopy (1)
- Standardization (1)
- Steelmaking residues (1)
- Stoichiometric homeostasis (1)
- Stone cultural heritage (1)
- Stop/flow experiments model (1)
- Strategy and Management (1)
- Stress conditions (1)
- Stress tolerance (1)
- Sub-4nm particles (1)
- Subaerial biofilms (1)
- Subjective complaints (1)
- Subsocial (1)
- Subsoil nutrient tracing (1)
- Sugar cane bagasse (1)
- Sum parameter (1)
- Suppression (1)
- Surface interactions (1)
- Surface water (1)
- Surface waters (1)
- Survival rates (1)
- Synchrotron (1)
- Synchrotron radiation (1)
- Synergy (1)
- Synthesis (1)
- Synthetic metabolism (1)
- Synthetic organic pigments (1)
- Systematics (1)
- Targeted and nontargeted (1)
- Targeting, Nanoparticles (1)
- Taxonomy (1)
- Temperate rain forest (1)
- Temple Scroll (1)
- Tems (1)
- Terbutryn (1)
- Termitoidae (1)
- Thermal analysis (1)
- Thermal degradation (1)
- Thermo-desorption (1)
- Thermochemical treatment (1)
- Thermocouple (1)
- Thermodynamic (1)
- Thioimidazolium (1)
- Time resolved chemical composition (1)
- Torah scrolls (1)
- Touch surfaces (1)
- Tripartite interactions (1)
- UV radiation (1)
- UV-irradiation (1)
- Ultrastructure (1)
- Umweltmessung (1)
- Up-cycling (1)
- Ureolytic bacteria (1)
- Utilisation (1)
- VOC emission (1)
- Validation trial (1)
- Vanadium (1)
- Viruses (1)
- Vitriolic iron-gall inks (1)
- Waste incineration (1)
- Waste management (1)
- Waste treatment (1)
- Water (1)
- Water atmosphere (1)
- Water contact (1)
- Water stable isotope analysis (1)
- Water uptake (1)
- Weld fatigue (1)
- Weld toe geometry (1)
- White-rot fungi (1)
- Wood Modification (1)
- Wood ash (1)
- Wood samples (1)
- Wooden toys (1)
- Writing materials (1)
- X-Ray analysis (1)
- X-ray adsorption near-edge structure (XANES) spectroscopy (1)
- X-ray diffraction (XRD) (1)
- X-ray fuorescence (1)
- X-ray spectroscopy (1)
- X-ray tomographic (1)
- XRF (1)
- XRF imaging (1)
- XRF ink analysis (1)
- Yeast (1)
- ZIF (1)
- ZIF-8 (1)
- Zearalenone (1)
- Zearalenone sulfate (1)
- Zeolithe (1)
- Zinc (1)
- Zinc chloride (1)
- Zinc oxide (1)
- a-zearalenol (1)
- dsDAN monolayer (1)
- fertilizer (1)
- iChip (1)
- microspectroscopy (1)
- pH (1)
- pH probe (1)
- pH sensor (1)
- pHe (1)
- qPCR (1)
- soil (1)
- x-ray diffraction (1)
- ‘Green’ pesticide (1)
Organisationseinheit der BAM
- 4 Material und Umwelt (263) (entfernen)
Paper des Monats
- ja (19)
Column leaching tests are frequently used and accepted for investigation of release of hazardous substances from solid materials. Independent of differences due to the field of application or national regulations, column tests assume that local equilibrium is established in the experiment which facilitates transfer of results to field conditions. In the process of harmonization and standardization within Europe the question on the influence of flow rate and grain size distribution on the local equilibrium was raised. Thus, a set of experiments using two different masonry materials with varying grain size distribution and flow rate were conducted including stop/flow experiments. Results are compared to a numerical model which takes intraparticle pore diffusion-controlled release of Mo and V into the percolating water into account. Due to the relatively high intraparticle porosity of the materials (24–29%) data and model indicate that initially equilibrium-state conditions prevail followed by rapidly decreasing concentrations. The model fits data for Mo and V reasonably well; however, after the initial decline of concentrations (at L/S > 2) extended tailing is observed especially of elements occurring as oxides, which is not captured by the model.
ABSTRACT: A collection of thioimidazolium salts were synthesized and used as a new class of nonvolatile alkylating agents. Their nonvolatility prevents exposure during use or handling and are thus drastically safer than conventional alkylating agents. We discovered that thioimidazolium Iodide salts cannot release volatile compounds in the solid state, but instead only decompose when molten. Since decomposition proceeds via alkyl iodide elimination, SN2 of iodide on the thioimidazolium cation is constrained in the solid state, and instead can occur only upon melting when ions are mobile. By smart design of these alkylators, the melting point and thus the decomposition temperature of these salts can be increased from 106 to 169 °C and release negligible volatile organic compounds prior to melting. Thioimidazolium-bis(trifluoromethanesulfonyl)imide (TFSI) ionic liquids act as a completely nonvolatile and air-stable TFSI-based alkylating agent and can be used for high-throughput Synthesis of TFSI ionic liquids without solvent. Alkyl groups from methyl to dodecyl can be transferred to a nucleophile and the product purified by sublimation of the thione byproduct, which can then be recycled. We also found that thioimidazolium salts with a dodecyl chain are bactericidal, yet can hydrolyze in water to form benign neutral products, and thus wont accumulate in the environment. These results demonstrate that thioimidazolium salts are a designable platform for the pursuit of safer and more environmentally friendly alkylating and antiseptic agents.
Microbial activity and functioning in soils are strongly limited by carbon (C) availability, of which a great proportion is released by living roots. Rhizodeposition and especially root exudates stimulate microbial activity and growth, and may shift the stoichiometric balance between C, N, and P. Thereby, exudates heighten microbial nutrient demand and acquisition of N and P from organic matter, leading to an increase in enzyme production. Aim of this study was to determine environmental controls of extracellular enzyme production, and hence on potential enzyme activities (Vmax) and substrate affinities (Km). To determine the controlling factors, we worked on four spatial scales from the microscale (i.e. rhizosphere) through the mesoscale (i.e. soil depth) and landscape scale (relief positions), and finally to the continental scale (1200 km transect within the Coastal Cordillera of Chile). Kinetics of seven hydrolyzing enzymes of the C, N, and P cycles (cellobiohydrolase, β‑glucosidase, β‑xylosidase, β‑N‑acetylglucosaminidase, leucine‑aminopeptidase, tyrosine‑aminopeptidase, and acid phosphatase) were related to soil texture, C and N contents, pH, and soil moisture via redundancy analysis (RDA). Potential activities of C, N, and P acquiring enzymes increased up to 7-times on the continental scale with rising humidity of sites and C and N contents, while substrate affinities simultaneously declined. On the landscape scale, neither Vmax nor Km of any enzyme differed between north and south slopes. From top- to subsoil (down to 120 cm depth) potential activities decreased (strongest of aminopeptidases under humid temperate conditions with up to 90%). Substrate affinities, however, increased with soil depth only for N and P acquiring enzymes. Affinities of cellobiohydrolase and β‑xylosidase, on the contrary, were 1.5- to 3-times higher in top- than in subsoil. Potential activities of N and P acquiring enzymes and β‑glucosidase increased form bulk to roots. Simultaneously, substrate affinities of N and P acquiring enzymes declined, whereas affinities of β‑glucosidase increased. These trends of activities and affinities in the rhizosphere were significant only for acid phosphatase. The RDA displayed a strong relation of potential activities of C and P acquiring enzymes and β‑N‑acetylglucosaminidase to C and N contents in soil as well as to the silt and clay contents. Aminopeptidase activity was mainly dependent on soil moisture and pH. We conclude that substrate availability for microorganisms mainly determined enzyme activity patterns on the continental scale by the humidity gradient. Patterns on the meso- and microscale are primarily controlled by nutrient limitation, which is induced by a shift of the stoichiometric balance due to input of easily available C by roots in the rhizosphere.
In a controlled growth experiment we found that the cyanobacterium Nostoc punctiforme has a bulk cell 26Mg/24Mg ratio (expressed as δ26Mg) that is −0.27‰ lower than the growth solution at a pH of ca. 5.9. This contrasts with a recently published δ26Mg value that was 0.65‰ higher than growth solution for the black fungus Knufia petricola at similar laboratory conditions, interpreted to reflect loss of 24Mg during cell growth. By a mass balance model constrained by δ26Mg in chlorophyll extract we inferred the δ26 Mg value of the main Mg compartments in a cyanobacteria cell: free cytosolic Mg (−2.64‰), chlorophyll (1.85‰), and the nonchlorophyll-bonded Mg compartments like ATP and ribosomes (−0.64‰). The lower δ26Mg found in Nostoc punctiforme would thus result from the absence of significant Mg efflux during cell growth in combination with either (a) discrimination against 26Mg during uptake by desolvation of Mg or transport across protein channels or (b) discrimination against 24Mg in the membrane transporter during efflux. The model predicts the preferential incorporation of 26Mg in cells and plant organs low in Mg and the absence of isotope fractionation in those high in Mg, corroborated by a compilation of Mg isotope ratios from fungi, bacteria, and higher plants.
In Denmark, increasing amounts of woody biomass are being used for the production of renewable energy, resulting in more wood ashes being generated. While these materials have been mainly landfilled, wood ashes may also be utilised for fertilizing and liming purposes on top of soils. Pre-treatments involving hardening or granulation may be carried out prior to soil application. In this study, two Danish wood ash samples were hardened and/or granulated. Lab-hardening induced rapid changes in the shape of the acid neutralisation capacity curve of the ashes. Up-flow column tests, assuming local equilibrium conditions, were employed to investigate the leaching from pre-treated ashes. Granules and loose ashes demonstrated similar leaching behaviours, indicating that similar geochemical processes were governing their leaching. In comparison with untreated fresh ashes, the hardened ashes demonstrated reduced leaching of Ca, Ba, Pb and Zn with concentration levels generally below or close to the analytical limits of quantification; to the contrary, the leaching of As, P, Sb, Si, V and Mg was enhanced in the hardened ashes. The release of alkalinity was reduced by hardening. In general, all granules were barely breakable by finger-pinching and they could withstand one month of continuous leaching, preserving their overall shape. The solubility of phosphorous in neutral ammonium citrate indicated that about 30–51% of the total P content in the ash samples was released, suggesting that the ashes could be potentially valuable as P-fertiliser if applied onto soil.
Biocides are commonly applied to construction materials such as facade renders and paints in order to protect them from microbial spoilage. These renders and paints are exposed to weathering conditions, e.g., sunlight and rain. Pigments are interacting intensively with the spectrum of the incoming light; thus, an effect of paint pigments on phototransformation rates and reaction pathways of the biocides is hypothesized.
In this study, the phototransformation of four commonly used biocides (carbendazim, diuron, octylisothiazolinone (OIT) and terbutryn) in four different paint formulations differing solely in pigments (red and black iron oxides, white titanium dioxide, and one pigment-free formulation) were investigated. Paints surfaces were irradiated under controlled conditions. The results show that biocides degrade most rapidly in the pigment-free formulation. The degradation in the pigment-free formulation followed a first-order kinetic model with the respective photolysis rate constants: kp,Diuron=0.0090 h−1, kp,OIT=0.1205 h−1, kp,Terbutryn=0.0079 h−1.
Carbendazim concentrations did not change significantly. The degradation was considerably lower in the pigment-containing paints. The determination of several phototransformation products of terbutryn and octylisothiazolinone showed different transformation product ratios dependent on the pigment. Consequently, pigments not only reflect the incoming light, but also interact with the biocide photodegradation.
In nature, the cellular environment of DNA includes not only water and ions, but also other components and co-solutes, which can exert both stabilizing and destabilizing effects on particular oligonucleotide conformations. Among them, ectoine, known as an important osmoprotectant organic co-solute in a broad range of pharmaceutical products, turns out to be of particular relevance. In this article, we study the influence of ectoine on a short single-stranded DNA fragment and on double-stranded helical B-DNA in aqueous solution by means of atomistic molecular dynamics (MD) simulations in combination with molecular theories of solution. Our results demonstrate a conformation-dependent binding behavior of ectoine, which favors the unfolded state of DNA by a combination of electrostatic and dispersion interactions. In conjunction with the Kirkwood–Buff theory, we introduce a simple Framework to compute the influence of ectoine on the DNA melting temperature. Our findings reveal a significant linear decrease of the melting temperature with increasing ectoine concentration, which is found to be in qualitative agreement with results from denaturation experiments. The outcomes of our Computer simulations provide a detailed mechanistic rationale for the surprising destabilizing influence of ectoine on distinct DNA structures.
Social insects employ a range of behaviours to protect their colonies against disease, but little is known about how such collective behaviours are orchestrated. This is especially true for the social Blattodea (termites). We developed an experimental approach that allowed us to explore how the social response to disease is co-ordinated by multistep host-pathogen interactions. We infected the eastern subterranean termite Reticulitermes flavipes with the entomopathogenic fungus Metarhizium anisopliae, and then, at different stages of infection, reintroduced them to healthy nestmates and recorded behavioural responses. As expected, termites groomed pathogen-exposed individuals significantly more than controls; however, grooming was significantly elevated after fungal germination than before, demonstrating the importance of fungal status to hygienic behaviour. Significantly, we found that cannibalism became prevalent only after exposed termites became visibly ill, highlighting the importance of host condition as a cue for social hygienic behaviour. Our study reveals the presence of a coordinated social response to disease that depends on stage of infection. Specifically, we show how the host may play a key role in triggering its own sacrifice. Sacrificial self-flagging has been observed in other social insects: our results demonstrate that termites have independently evolved to both recognize and destructively respond to sickness.
Coastal oceans receive large amounts of anthropogenic fixed nitrogen (N), most of which is denitrified in the sediment before reaching the open ocean. Sandy sediments, which are common in coastal regions, seem to play an important role in catalysing this N‐loss. Permeable sediments are characterized by advective porewater transport, which supplies high fluxes of organic matter into the sediment, but also leads to fluctuations in oxygen and nitrate concentrations. Little is known about how the denitrifying communities in these sediments are adapted to such fluctuations. Our combined results indicate that denitrification in eutrophied sandy sediments from the world's largest tidal flat system, the Wadden Sea, is carried out by different groups of microorganisms. This segregation leads to the formation of N2O which is advectively transported to the overlying waters and thereby emitted to the atmosphere. At the same time, the production of N2O within the sediment supports a subset of Flavobacteriia which appear to be specialized on N2O reduction. If the mechanisms shown here are active in other coastal zones, then denitrification in eutrophied sandy sediments may substantially contribute to current marine N2O emissions.
Bioinformatics meets virology: The European virus bioinformatics center's second annual meeting
(2018)
The Second Annual Meeting of the European Virus Bioinformatics Center (EVBC), held in Utrecht, Netherlands, focused on computational approaches in virology, with topics including (but not limited to) virus discovery, diagnostics, (meta-)genomics, modeling, epidemiology, molecular structure, evolution, and viral ecology. The goals of the Second Annual Meeting were threefold: (i) to bring together virologists and bioinformaticians from across the academic, industrial, professional, and training sectors to share best practice; (ii) to provide a meaningful and interactive scientific environment to promote discussion and collaboration between students, postdoctoral fellows, and both new and established investigators; (iii) to inspire and suggest new research directions and questions. Approximately 120 researchers from around the world attended the Second Annual Meeting of the EVBC this year, including 15 renowned international speakers. This report presents an overview of new developments and novel research findings that emerged during the meeting.
Despite the recognized excellence of virology and bioinformatics, these two communities have interacted surprisingly sporadically, aside from some pioneering work on HIV-1 and influenza. Bringing together the Expertise of bioinformaticians and virologists is crucial, since very specific but fundamental computational approaches are required for virus research, particularly in an era of big data. Collaboration between virologists and bioinformaticians is necessary to improve existing analytical tools, cloud-based systems, computational resources, data sharing approaches, new diagnostic tools, and bioinformatic training. Here, we highlight current progress and discuss potential avenues for future developments in this promising era of virus bioinformatics. We end by presenting an overview of current technologies, and by outlining some of the Major challenges and Advantages that bioinformatics will bring to the field of virology.
The importance of soldiers to termite Society defence has long been recognized, but the contribution of soldiers to other societal functions, such as colony immunity, is less well understood.
We explore this issue by examining the role of soldiers in protecting nestmates against pathogen infection. Even though they are unable to engage in grooming behaviour, we find that the presence of soldiers of the Darwin termite, Mastotermes darwiniensis, significantly improves the survival of nestmates following entomopathogenic infection.
We also show that the copious exocrine oral secretions produced by Darwin termite soldiers contain a high concentration of Proteins involved in digestion, chemical biosynthesis, and immunity. The oral secretions produced by soldiers are sufficient to protect nestmates against infection, and they have potent inhibitory activity against a broad spectrum of microbes. Our findings support the view that soldiers may play an important role in colony immunity, and broaden our understanding of the possible function of soldiers during the origin of soldier-first societies.
In this work, we use a gas sensor system consisting of a commercially available gas sensor in temperature cycled operation. It is trained with an extensive gas profile for detection and quantification of hazardous volatile organic compounds (VOC) in the ppb range independent of a varying background of other, less harmful VOCs and inorganic interfering gases like humidity or hydrogen. This training was then validated using a different gas mixture generation apparatus at an independent lab providing analytical methods as reference. While the varying background impedes selective detection of benzene and naphthalene at the low concentrations supplied, both formaldehyde and total VOC can well be quantified, after calibration transfer, by models trained with data from one system and evaluated with data from the other system. The lowest achievable root mean squared errors of prediction were 49 ppb for formaldehyde (in a concentration range of 20–200 ppb) and 150 μg/m³ (in a concentration range of 25–450 μg/m³) for total VOC. The latter uncertainty improves to 13 μg/m³ with a more confined model range of 220–320 μg/m³. The data from the second lab indicate an interfering gas which cannot be detected analytically but strongly influences the sensor signal. This demonstrates the need to take into account all sensor relevant gases, like, e.g., hydrogen and carbon monoxide, in analytical reference measurements.
Surface characterisation of Escherichia coli under various conditions by near-ambient pressure XPS
(2018)
Bacteria are inherently in a hydrated state and therefore not compatible to ultra-high vacuum techniques such as XPS without prior sample preparation involving freeze drying or fast freezing.
This has changed with the development of near-ambient pressure (NAP)-XPS, which makes it possible to characterise the bacterial surface with minimal sample preparation. This paper presents NAP-XPS measurements of Escherichia coli under various NAP conditions: at 11 mbar in a humid environment, at 2 mbar after drying in the chamber, pre-dried at 4 mbar, and at 1 mbar after overnight pumping at 10^−4 mbar. The high-resolution spectra of carbon, nitrogen, and oxygen are presented and found to be in general agreement with XPS measurements from freeze-dried and fast-frozen bacteria. However, it was found that the amount of carbon components associated with polysaccharides increases relative to aliphatic carbon during drying and increases further after overnight pumping. This implies that drying has an impact on the bacterial surface.
In the near future, phosphorus (P) recycling will gain importance in terms of decreasing primary resources. Sewage sludge (SSL) is an adequate secondary P-resource for P-fertilizer production but it is also a sink for heavy metals and organic pollutants. The present study is an investigation on thermochemical P-recycling of SSL. Various temperatures and amendments were tested regarding their performance to remove heavy metals and polycyclic aromatic hydrocarbons (PAH) and simultaneous increase of the plant-availability of P. The investigations were carried out on two types of SSL originating from wastewater treatment plants with chemical P-precipitation and enhanced biological P-removal, respectively. The results show that thermochemical treatment with chlorine donors is suitable to remove the majority of heavy metals and that a combination of a gaseous chlorine donor (HCl) and sodium additives leads to both high heavy metal removal and high plant availability of P. Furthermore, plant experiments Show that almost all investigated thermochemical treatments can significantly reduce the bioavailability and plant uptake of heavy metals. Furthermore, PAHs are secondarily formed during low-temperature treatments (400–500 ° ), but can be significantly reduced by using sodium carbonate as an additive.
Graphene and its derivatives have recently attracted much attention for sensing and deactivating pathogens. However, the mechanism of multivalent interactions at the graphene–pathogen interface is not fully understood. Since different physicochemical parameters of graphene play a role at this interface, control over graphene’s structure is necessary to study the mechanism of these interactions. In this work, different graphene derivatives and also zwitterionic graphene nanomaterials (ZGNMs) were synthesized with defined exposure, in terms of polymer coverage and functionality, and isoelectric points. Then, the switchable interactions of these nanomaterials with E. coli and Bacillus cereus were investigated to study the validity of the generally proposed “trapping” and “nano-knives” mechanisms for inactivating bacteria by graphene derivatives. It was found that the antibacterial activity of graphene derivatives strongly depends on the accessible area, i.e. edges and basal plane of sheets and tightness of their agglomerations. Our data clearly confirm the authenticity of “trapping” and “nano-knives” mechanisms for the antibacterial activity of graphene sheets.
Microplastics are increasingly entering marine, limnic and terrestrial ecosystems worldwide, where they sorb hydrophobic organic contaminants. Here, the sorption behavior of the fuel-related water contaminants benzene, toluene, ethyl benzene and xylene (BTEX) and four tertiary butyl ethers to virgin and via UV radiation aged polypropylene (PP) and polystyrene (PS) pellets was investigated. Changes in material properties due to aging were recorded using appropriate polymer characterization methods, such as differential scanning calorimetry, Fourier transform infrared spectroscopy, gel permeation chromatography, X-ray photoelectron spectroscopy, and microscopy.
Pellets were exposed to water containing BTEX and the ethers at 130-190 mg/L for up to two weeks.
Aqueous sorbate concentrations were determined by headspace gas chromatography. Sorption to the polymers was correlated with the sorbate's Kow and was significant for BTEX and marginal for the ethers.
Due to substantially lower glass transition temperatures, PP showed higher sorption than PS. Aging had no effect on the sorption behavior of PP. PS sorbed less BTEX after aging due to an oxidized surface layer.
3D-printing or additive manufacturing has many promising and unique advantages. Especially low cost molten polymer Deposition Printers are increasingly populär in the private and educational sector.
Their environmental friendliness can be questioned due to recently reported ultrafine particle and suspected VOC emissions, To further investigate 3D-printing as a potential indoor air pollution source we characterized fine and ultrafine particle emissions from a molten polymer deposition printer producing a 3D object with ten marketable polymer filament materials under controlled conditions in a test chamber. VOC emissions from the filaments have also been compared. Using a straightforward emission model time dependent and averaged particle emission rates were determined. The results indicate that under comparable conditions some filament materials produce mainly ultrafine particles up to an average rate of 1013 per minute. This value is in the upper ränge of typical indoor ultrafine particle sources (e.g. Smoking, frying, candle light, laser printer). The observed material-specific rates differ by five Orders of magnitude. Filament-specific gaseous emissions of organic compounds such as bisphenol A, styrene and others were also detected.
Our results suggest a detailed evaluation of related risks and considering protective measures such as housing and filtering.
Construction products are in contact with water (e.g., rain, seepage water) during their service lifetime and may release potentially harmful compounds by leaching processes. Monitoring studies showed that compounds attributed to construction products are found in storm water and the receiving bodies of water and that the release of biocides in urban areas can be comparable to the input of pesticides from agricultural uses. Therefore, a prospective risk assessment of such products is necessary. Laboratory leaching tests have been developed by the Technical Committee CEN/TC 351 and are ready to use. One major task in the future will be the evaluation of the leaching test results, as concentrations found in laboratory experiments are not directly comparable to the field situations. Another Task will be the selection of compounds to be considered for construction products, which are often a complex mixture and contain additives, pigments, stabilization agents, etc. The formulations of the products may serve as a starting point, but total content is a poor predictor for leachability, and analysis of the eluates is necessary. In some cases, nontargeted approaches might be required to identify compounds in the eluates. In the identification process, plausibility checks referring to available information should be included. Ecotoxicological tests are a complementary method to test eluates, and the combined effects of all compounds—including Degradation products—are included. A bio test battery has been applied in a round robin test and was published in a guidance document. Published studies on the ecotoxicity of construction products show the tests’ suitability to distinguish between products with small and larger effects on the environment.
Equipping ZIF particles with a polyelectrolyte membrane provides functional groups at their interface, enabling further conjugations necessary for applications such as targeted drug delivery. Previous approaches to coat ZIF particles with polyelectrolytes led to surface corrosion of the template material. This work overcomes previous limitations by performing a Layer-by-Layer (LbL) polyelectrolyte coating onto ZIF-8 and ZIF-67 particles in nonaqueous environment. Using the 2-methylimidazolium salt of polystyrensulfonic acid instead of the acid itself and polyethyleneimine in methanol led to intact ZIF particles after polyelectrolyte coating. This was verified by electron microscopy. Further, zetapotential and atomic force microscopy measurements confirmed a continuous polyelectrolyte multilayer built up. The here reported adaption to the well-studied (LbL) polyelectrolyte selfassembly process provides a facile method to equip ZIF particles with a nanometer thin polyelectrolyte multilayer membrane.