4 Material und Umwelt
Filtern
Dokumenttyp
- Zeitschriftenartikel (259) (entfernen)
Sprache
- Englisch (259) (entfernen)
Referierte Publikation
- ja (259) (entfernen)
Schlagworte
- Leaching (14)
- Biocides (10)
- Phosphorus (9)
- Sewage sludge (9)
- Bacteria (8)
- Antimicrobial resistance (6)
- Bottom ash (6)
- Circular economy (6)
- Construction products (6)
- Biofilm (5)
- Biofilms (5)
- DRIFTS (5)
- Ectoine (5)
- Fungi (5)
- Thermal desorption (5)
- Black fungi (4)
- Degradation (4)
- Fertilizer (4)
- Gas chromatography (4)
- Non-invasive analysis (4)
- Phosphorus recovery (4)
- Polyethylene (4)
- Raman spectroscopy (4)
- Reverse glass painting (4)
- VOC (4)
- Wastewater (4)
- X-ray absorption near-edge structure (XANES) spectroscopy (4)
- XANES spectroscopy (4)
- Archaeometry (3)
- Bio-weathering (3)
- Biodeterioration (3)
- Corrosion (3)
- Diffusive gradients in thin films (DGT) (3)
- Disinfection (3)
- Emission test chamber (3)
- Evolution (3)
- Fertilzer (3)
- Geosynthetics (3)
- Geotextiles (3)
- Indoor air quality (3)
- Interlaboratory comparison (3)
- Knufia petricola (3)
- NAP-XPS (3)
- Osmoadaptation (3)
- PFAS (3)
- Papyrus (3)
- Pathogen (3)
- Phosphorus fertilizer (3)
- Renewable Energy, Sustainability and the Environment (3)
- Scandium (3)
- Sewage sludge ash (3)
- Soil (3)
- Standardisation (3)
- Struvite (3)
- TXRF (3)
- Termite (3)
- Thermal treatment (3)
- Ultrafine particles (3)
- VVOC (3)
- Volatile organic compounds (3)
- Wood Protection (3)
- Wood protection (3)
- Aerosol (2)
- Air pollution (2)
- Air quality monitoring (2)
- Air sampling (2)
- Analytical methods (2)
- Atomic and Molecular Physics and Optics (2)
- Bacterial adhesion (2)
- Biocorrosion (2)
- Bioinformatics (2)
- Bioreceptivity (2)
- Building and Construction (2)
- Cannibalism (2)
- Cascade impactor (2)
- Combustion ion chromatography (CIC) (2)
- Condensed Matter Physics (2)
- Coptic (2)
- DHN melanin (2)
- DNA (2)
- Design of experiments (2)
- Ecotoxicity (2)
- Emission (2)
- Energy Engineering and Power Technology (2)
- Entomopathogen (2)
- Environment (2)
- Extracellular polymeric substances (2)
- Extractable organically bound fluorine (EOF) (2)
- Fluoride (2)
- Forsterite (2)
- Fuel Technology (2)
- Fungus (2)
- Gut microbiota (2)
- Halomonas elongata (2)
- High resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) (2)
- Horizontal gene transfer (2)
- ICP-MS (2)
- ISO 16000-6 (2)
- Immunity (2)
- Incineration bottom ash (2)
- Insect biotechnology (2)
- Isoptera (2)
- Keratin (2)
- Laser processing (2)
- Laser-induced periodic surface structures (LIPSS) (2)
- Leaching control mechanisms (2)
- Leaching tests (2)
- MIC (2)
- MOF (2)
- Magnesium (2)
- Manuscripts (2)
- Marine littering (2)
- Mechanochemistry (2)
- Melting experiments (2)
- Metabolomics (2)
- Method development (2)
- Microbiologically influenced corrosion (2)
- Microbiota (2)
- Micropatterning (2)
- Microplastic (2)
- Mixed ink (2)
- NanoSIMS (2)
- Nosema ceranae (2)
- Osmia bicornis (2)
- Particles (2)
- Passive sampling (2)
- Per- and Polyfluoroalkyl substances (PFAS) (2)
- Pigment identification (2)
- Polyglycerol (2)
- Pseudomonas aeruginosa (2)
- Recycling (2)
- Recycling fertilizer (2)
- Reference material (2)
- Social (2)
- Substance release (2)
- Symbiosis (2)
- Termites (2)
- Tineola bisselliella (2)
- Transcriptomics (2)
- Transformation (2)
- Virology (2)
- Virulence (2)
- Waste-to-energy (2)
- Weathering (2)
- Wild bees (2)
- X-ray diffraction (2)
- XANES (2)
- XPS (2)
- (Semi)arid to humid-temperate natural ecosys (1)
- 13CO2 pulse labeling (1)
- 16S rRNA gene (1)
- 3D printer (1)
- 3D printing (1)
- A key interface (1)
- A-DNA conformation (1)
- AEROMET II (1)
- AEROMET project (1)
- Accelerated aging (1)
- Accuracy (1)
- Adaptation (1)
- Adaption (1)
- Additive Manufacturing (1)
- Adipokinetic hormone (1)
- Adipokinetic hormone receptor (1)
- Adsorbable organically bound fluorine (AOF) (1)
- Advanced groups of termites (1)
- Aerodynamic levitation (1)
- Aerosol gravimetry (1)
- Aerosol measurement instruments (1)
- Aerosols (1)
- Aerosolsensor (1)
- Affinity chromatography (1)
- Ag-LDI-MS (1)
- Aging (1)
- Aging tests (1)
- Agricultural mycology (1)
- Agronomic performance (1)
- Air analysis (1)
- Air pollution control (1)
- Alexander von Humboldt (1)
- Alkylating agents (1)
- Ambient aerosols (1)
- Ammonium (1)
- Amphiphilic polymer (1)
- Amplicon sequencing (1)
- Anaerobic pathways (1)
- Analytical Chemistry (1)
- Analytical screening techniques (1)
- Animal immune system (1)
- Anobium punctatum (1)
- Antagonism (1)
- Antibacterial (1)
- Antibacterial coatings (1)
- Antibacterial polymer (1)
- Antibacterial surfaces (1)
- Antibiotic resistance (1)
- Antibiotics (1)
- Antibodies (1)
- Antifouling (1)
- Antimicrobial (1)
- Antimicrobial coating (1)
- Antimicrobial materials (1)
- Antimicrobial surfaces (1)
- Antimicrobial test (1)
- Antimicrobial testing (1)
- Antimicrobials (1)
- Antimony (1)
- Antiseptic agents (1)
- Aquatic fungi (1)
- Aqueous synthesis (1)
- Arbuscular mycorrhiza (1)
- Archaea (1)
- Architecture (1)
- Artificial ageing (1)
- Artificial weathering (1)
- Ascosphaera apis (1)
- AshDec (1)
- Aspergillus (1)
- Assessment (1)
- Automated analysis (1)
- BEMMA (1)
- BESSY (1)
- BODIPY (1)
- BOFS (1)
- BTEX (1)
- Bacillus subtilis (1)
- Bacterial attachment (1)
- Bacterial cell cycle (1)
- Bacterial second messenger (1)
- Basidiomycetes (1)
- Bassanite (1)
- Batch tests (1)
- Bathyarchaeia (1)
- Bauxite Residue (1)
- Bauxite residue (1)
- Bawit (1)
- Bee diseases (1)
- Bee health (1)
- Behavioural mechanisms (1)
- Beneficial microbes (1)
- Beschichtung (1)
- Bio-based insulation (1)
- Bioceramics (1)
- Biocide tolerance (1)
- Biodeterioration and biodegradation (1)
- Biofilm formation (1)
- Biofilm quantification (1)
- Biofouling (1)
- Biogenic weathering (1)
- Bioinformatics virology viruses software (1)
- Biological pest control (1)
- Biomimetic (1)
- Biosynthesis (1)
- Biotests (1)
- Biotic environment (1)
- Biphasic growth (1)
- Black microcolonial fungi (1)
- Black writing ink (1)
- Blast-furnace sludge (1)
- Blattodea (1)
- Botrytis cinerea (1)
- Brown-rot fungi (1)
- Building Material (1)
- Building materials (1)
- Built environment (1)
- Bushveld Complex (1)
- C-di-GMP (1)
- CCQM (1)
- CEC-L-103 (1)
- CHC (1)
- COST action CA15114 AMICI (1)
- CPC calibration (1)
- CRISPR/Cas9 (1)
- CaNaPO4 (1)
- Calcium alkali phosphate (1)
- Calcium carbonate (1)
- Calcium silicate (1)
- Calcium sulfate (1)
- Calibration transfer (1)
- Carbon ink (1)
- Carbon steel (1)
- Carbon steel corrosion (1)
- Cell appendages (1)
- Cell studies (1)
- Cell-envelope (1)
- Cellulose ether (1)
- Cellulose synthase (1)
- Cerium oxide (1)
- Characterisation (1)
- Chemical analysis (1)
- Chemical durability (1)
- Chemical ecology (1)
- Chemical extraction (1)
- Chemical extraction methods (1)
- Chemical recycling (1)
- Chemicals (1)
- Chicken manure ash (1)
- Chilean Coastal Cordillera (1)
- Chlorine (1)
- Chromitites (1)
- Circular Economy (1)
- Clean steel (1)
- Cleridae (1)
- Climate gradient (1)
- Cloning vectors (1)
- Close proximity to colonies (1)
- Cobalt (1)
- Cockroach (1)
- Cockroaches (1)
- Codex (1)
- Cognitive performance (1)
- Coleoptera (1)
- Colored glasses (1)
- Colourants (1)
- Combustion Ion Chromatography (1)
- Combustion and gasification (1)
- Combustion ion chromatography (1)
- Community composition (1)
- Community-level interactions (1)
- Comparison (1)
- Compatible solute (1)
- Comsumer good samples (1)
- Concept (1)
- Concrete (1)
- Confocal microscopy (1)
- Conjugate (1)
- Conjugation (1)
- Conservation (1)
- Construction materials (1)
- Construction product (1)
- Construction products regulation (CPR) (1)
- Consumer products (1)
- Contamination (1)
- Contraction (1)
- Control (1)
- Copper-based wood preservatives (1)
- Coptic manuscripts (1)
- Corundum (1)
- Critical raw materials (1)
- Cross-feeding (1)
- Cross-resistance (1)
- Cross-sectioning (1)
- Cryo XPS (1)
- Crystalline phase identification (1)
- Crystallization (1)
- CuNPs (1)
- Cultural heritage (1)
- Cupriavidus campinensis (1)
- Cuticular hydrocarbons (1)
- Cyanobacteria (1)
- DNA polymerase (1)
- DSM 5009 (1)
- Dead Sea Scrolls (1)
- Decomposition point (1)
- Degradable polymer (1)
- Dendrimer (1)
- Denitrification (1)
- Density separation (1)
- Desert ecology (1)
- Developing building materials (1)
- Dielectric heating (1)
- Dietary adaptation (1)
- Differential expression (1)
- Diffractive gratings (1)
- Diffusive Gradients in Thin-films (DGT) (1)
- Diffusive Gradients in thin films (DGT) (1)
- Diffusive gradients in thin-films (DGT) (1)
- Direct laser writing (1)
- Disinfection Fuel (1)
- Disposal (1)
- Diversity (1)
- Dothideomycetes (1)
- Draft Genome (1)
- Drawings (1)
- Driving rain (1)
- Dry treatment (1)
- Drywood termite (1)
- DsRNA (1)
- Dye (1)
- Dynamic calibration gas mixtures (1)
- Dynamic surface leaching test (1)
- E. coli (1)
- EAF slags (1)
- EN 717-3 (1)
- Earthen building materials (1)
- Ecotoxicity tests (1)
- Ecotoxicological tests (1)
- Ecotoxixity (1)
- Efficacy (1)
- Egypt (1)
- Electric arc furnace (EAF) slags (1)
- Electric arc furnace dust (1)
- Electric arc furnace slags (1)
- Electron microscopy (1)
- Electronic (1)
- Element mass concentration (1)
- Elemental aerosol analysis (1)
- Elemental composition (1)
- Eluates (1)
- Emission chamber (1)
- Emission test method (1)
- Emission testing (1)
- Enamels (1)
- Entomopathogenic Fungus (1)
- Entropy (1)
- Environmental Chemistry (1)
- Environmental Engineering (1)
- Environmental assessment (1)
- Environmental conditions (1)
- Environmental evaluation (1)
- Environmental impact (1)
- Environmental simulations (1)
- Epidemal layer (1)
- Eurotiomycetes (1)
- Exocrine gland (1)
- Expansion (1)
- Exposure (1)
- External (1)
- Extracellular enzymes (1)
- Extracellular pH (1)
- Extractable organic fluorine (1)
- Extraction (1)
- Extremophile (1)
- Extremophiles (1)
- F pili (1)
- FAT class concept (1)
- FFF-3D printer (1)
- FFF-3D printing (1)
- FFF-filament (1)
- FFF-printing (1)
- FactSage calculations (1)
- FactSageTM calculations (1)
- Family archives (1)
- Faraday cup aerosol electrometer (1)
- Fatigue (1)
- Fenton-like reaction (1)
- Fire-retardant paint (1)
- Flask method (1)
- Flexible shadow masks (1)
- Flow system (1)
- Fluorescence (1)
- Fluorescence spectroscopy (1)
- Fluorescent microscopy (1)
- Fluorolytic sol-gel synthesis (1)
- Food (1)
- Food fermentation (1)
- Forest fires (1)
- Forest soils (1)
- Formaldehyde (1)
- Formation enthalpy (1)
- Fuel sorption (1)
- Fungal decay (1)
- Fungal stress mechanisms and responses (1)
- Fungiculture (1)
- Fusarium (1)
- GC-FID (1)
- GC-MS (1)
- GDL (1)
- GNBP-2 (1)
- Gas analysis (1)
- Gene expression (1)
- General Chemistry (1)
- General Environmental Science (1)
- General Materials Science (1)
- General Medicine (1)
- Genetics (1)
- Genome (1)
- Genome sequence (1)
- Genomics (1)
- Geology (1)
- Geomembranes (1)
- Global radiation (1)
- Graphene (1)
- Graphene–bacteria interaction (1)
- Green facades (1)
- Groundwater (1)
- Grouts (1)
- Growth-rate homeostasis (1)
- Gut symbionts (1)
- Gypsum (1)
- Gypsum plasterboards (1)
- Gypsum waste (1)
- Halogenation (1)
- Halophilic bacteria (1)
- Hazardous waste (1)
- Haze Samples (1)
- Hazenite (1)
- Health, Toxicology and Mutagenesis (1)
- Healthcare (1)
- Heat capacity (1)
- Heat maps (1)
- Heavy metal free (1)
- Heavy metal removal (1)
- Heavy metals (1)
- Hellenistic (1)
- Herbaspirillum seropedicae (1)
- Hermopolis (1)
- High density polyethylene (1)
- History of Art (1)
- Honey bee (1)
- Honeybee (1)
- Hospital premises (1)
- Host and symbiont ecology (1)
- Host immunity (1)
- Hydration products (1)
- Hydrogen storage (1)
- Hygienic behavior (1)
- Hyperarid (1)
- Hypermutation (1)
- Hypopharynx (1)
- ICP-OES (1)
- IR spectroscopy (1)
- ISO 22196 (1)
- ISO REMCO (1)
- ITS region (1)
- Idiopathic environmental intolerance (1)
- In situ (1)
- In situ synchrotron x-ray diffraction (1)
- In-situ Process Monitoring (1)
- In-situ analysis (1)
- Incubated soil/fertilizer mixtures (1)
- Indirect photolysis (1)
- Indoor Air: Adsorbent performance (1)
- Indoor air (1)
- Indoor mycobiome (1)
- Industrial and Manufacturing Engineering (1)
- Industrial mycology (1)
- Infecting a number of insects, (1)
- Infections (1)
- Infrared spectroscopy (1)
- Infrared thermography (1)
- Ink (1)
- Ink analysis (1)
- Insect evolution (1)
- Insecticide (1)
- Instrumentation (1)
- Inter-comparison (1)
- Inter-lab comparison (1)
- Inter-laboratory test (1)
- Intercomparison (1)
- Interdisciplinarity (1)
- Intraparticle diffusion (1)
- Intumescent coating (1)
- Ionic liquid (1)
- Ir DNA staining approach (1)
- Iron gall ink (1)
- Iron making (1)
- Iron scrap (1)
- Iron-gall ink (1)
- Isotopes (1)
- Issues (1)
- Joint grouts (1)
- Knock-out mutant (1)
- Korynetes caeruleus (1)
- LC-MS/MS (1)
- Laboratory breeding (1)
- Labrum (1)
- Laccase (1)
- Landfill (1)
- Landfill lining (1)
- Laser printer emission (1)
- Laser-induced nanostructures (1)
- Laser-modified surface (1)
- Layer-by-Layer (1)
- Life history data (1)
- Lifetime (1)
- Lignocellulose (1)
- Limit values (1)
- Low melting glasses (1)
- Low-molecular-weight organic substances (1)
- Luftgüte (1)
- Lysimeter (1)
- MSWI bottom ash (1)
- MSWI fly ash (1)
- Major transition (1)
- Marble (1)
- Marek's Disease Virus (1)
- Marek's virus (1)
- Mask fabrication (1)
- Mass spectrometry (1)
- Materials Chemistry (1)
- Mathematical analysis (1)
- Mechanisms of pathogenesis (1)
- Mechanosensitive channel (1)
- Medical mycology (1)
- Melanin (1)
- Melanin Adhesion (1)
- Melting point (1)
- Melting temperature (1)
- Metabolic engineering (1)
- Metabolic flux analysis (1)
- Metabolic modeling (1)
- Metabolism (1)
- Metadata (1)
- Metal recovery (1)
- Metals and Alloys (1)
- Metarhizium (1)
- Metarhizium robertsii DSM 1490 (1)
- Methane (1)
- Methanogen (1)
- Methanogens (1)
- Microbe (1)
- Microbial adhesions (1)
- Microbial simulation, (1)
- Microbially induced carbonate precipitation (MICP) (1)
- Microbiological influenced corrosion MIC (1)
- Microchamber (1)
- Microcolonial fungi (1)
- Micromonospora aurantiaca (1)
- Microwaves (1)
- Millipedes (1)
- Mineral (1)
- Mining (1)
- Mixture toxicity (1)
- Model (1)
- Model aerosols (1)
- Modeling (1)
- Modelling studies (1)
- Modified mycotoxins (1)
- Moisture (1)
- Moisture performance (1)
- Molecular Organic Frameworks (1)
- Molecular clock (1)
- Molecular identification (1)
- Molybdenum (1)
- Monoterpene (1)
- MscS (1)
- Mud volcanoe fluids (1)
- Multi-resistant bacteria (1)
- Multi-scale study (1)
- Multicellularity (1)
- Multidisciplinary (1)
- Multiple Displacement Amplification (1)
- Multiple chemical sensitivity (1)
- Multiple lines of evidence (1)
- Multiport (1)
- Municipal sewage sludge (1)
- Mussel-inspired coating (1)
- Mussel-inspired materials (1)
- Mutation rate (1)
- MySpot (1)
- Mycotoxin (1)
- Müllverbrennung (1)
- N and K analog tracer (1)
- NGS (1)
- NIR imaging (1)
- Nano (1)
- Nano Particles (1)
- Nano-Fourier-transform infrared spectroscopy (1)
- Nano-materials (1)
- Nanomaterial (1)
- Nanomaterials (1)
- Nanoparticle (1)
- Nanoparticles (1)
- Nanopowder (1)
- Nanosensor (1)
- Natural durability (1)
- Natural ecosystems (1)
- Near ambient x-ray photoelectron spectroscopy (1)
- Near-infrared refectography (1)
- Neuropeptide (1)
- New exocrine organ (1)
- Next generation sequencing (1)
- Nickel (1)
- Nitrification inhibitor (1)
- Nitrososphaerales (1)
- Nitrous oxide (1)
- Non-destructiv testing (1)
- Non-destructive Materials (1)
- Non-ferrous metals (1)
- Non-invasive (1)
- Non-vitriolic iron-gall inks (1)
- Nonspecific binding (NSB) (1)
- Nonvolatile (1)
- Nostoc punctiforme (1)
- Nutrient (1)
- Nutrient acquisition (1)
- Nutrient cycles (1)
- Nutrient uplift and recyclin (1)
- OECD (1)
- OIT (1)
- Oddy test (1)
- Oil (1)
- Olivine (1)
- One-step ionic liquids synthesis (1)
- Open data (1)
- Optical and Magnetic Materials (1)
- Organic contaminants (1)
- Organic phosphorus breakdown (1)
- Osmotic shock (1)
- Osteogenesis (1)
- Oxide melts (1)
- P sink method (1)
- P speciation (1)
- P-efficiency (1)
- P. Fluorescens (1)
- PM monitors (1)
- PV modules (1)
- Painting (1)
- Particle emission (1)
- Particle size distribution (1)
- Particle synthesis (1)
- Partikel (1)
- Parylene C (1)
- Pathogen spillover (1)
- Pathogen transmission (1)
- Pathogen virulence (1)
- Peptide-derived components (1)
- Per- and polyfluorinated alkly substances (PFASs) (1)
- Per- and polyfluorinated alkyl substances (PFASs) (1)
- Per- and polyfluoroalkyl substances (PFAS) (1)
- Performance (1)
- Permeability (1)
- Persistence (1)
- Pest control (1)
- Pesticides (1)
- Phase formation (1)
- Phase transformation (1)
- Phenotypic heterogeneity (1)
- Phenotypic variation (1)
- Phoshpor availability (1)
- Phosphate dynamics (1)
- Phosphate extractability and availability (1)
- Phosphorous recovery (1)
- Phosphorus K-edge-XANES spectroscopy (1)
- Phosphorus availability (1)
- Phosphorus elimination (1)
- Phosphorus plant-availability (1)
- Phosphous recovery (1)
- Photodynamic therapy (1)
- Photometric P determination (1)
- Photonics (1)
- Phototrophs (1)
- Phyllosphere (1)
- Pigment (1)
- Pilot comparison (1)
- Plant Experiment (1)
- Plant availability (1)
- Plant economic spectrum (1)
- Plant pathogen (1)
- Plastic degradation (1)
- Plastic waste (1)
- Platinum (1)
- Pollutant (1)
- Pollution (1)
- Polydopamine (1)
- Polyelektrolyt (1)
- Polyethylene terephthalate (1)
- Polyioinic liquid (1)
- Polymer-based products (1)
- Polymerase mutant (1)
- Polypropylene (1)
- Polystyrene (1)
- Polyurethanes (1)
- Porosity (1)
- Pot experiments (1)
- Potential toxic elements (1)
- Probiotic-based vaccines (1)
- Probiotics (1)
- Process Metallurgy (1)
- Process development (1)
- Process upscaling (1)
- Proficiency testing (1)
- Proofreading deficient (1)
- Prospective risk assessment (1)
- Proteome (1)
- Pseudomonas fluorescens (1)
- Pseudomonas veronii (1)
- Ptinidae (1)
- Public Health, Environmental and Occupational Health (1)
- Purification (1)
- Pyrolysis (1)
- Quasispecies (1)
- RNA interference (1)
- RNA-Seq (1)
- RNA-Sequencing (1)
- RNAi (1)
- Radio waves (1)
- Radon (1)
- Radon exhalation (1)
- Raman (1)
- Raman Spectroscopy (1)
- Reactive oxygen species (1)
- Reactor conditions (1)
- Real-time qPCR (1)
- Recovery (1)
- Recovery potential (1)
- Recovery rate (1)
- Recycled gypsum (1)
- Recycled sources (1)
- Red Mud (1)
- Red mud (1)
- Reductive decomposition (1)
- Reductive defluorination (1)
- Reference materials (1)
- Reference method (1)
- Reference organisms (1)
- Reference samples (1)
- Regulation (1)
- Rembrandt (1)
- Remediation (1)
- Resistance model (1)
- Resource Recovery (1)
- Resources (1)
- Reverse paintings on glass (1)
- Rhenanite (1)
- Rhizopus (1)
- Rhizopus and Aspergillus oryzae (1)
- Rhizosphere effect (1)
- Rhizosphere processes (1)
- Rice (1)
- Robustness validation (1)
- Rock biofilm (1)
- Root economics space (1)
- Rostral gland (1)
- Round robin test (1)
- Rround robin test (1)
- Ruthenium (1)
- SEM (1)
- SEM micrography (1)
- SIMS (1)
- SVOC (1)
- Safety (1)
- Salts (1)
- Sample preparation (1)
- Sapphire (1)
- Sc recovery (1)
- Sc-ICP-ToF-MS (1)
- Scanning micro-X-ray fluorescence (1)
- Scattering (1)
- Scattering-type scanning near-field optical microscopy (s-SNOM) (1)
- Scribal corrections (1)
- Secondary P-fertilizer (1)
- Secondary building materials (1)
- Secondary metabolites (1)
- Selective Chlorination (1)
- Selective chlorination (1)
- Selective quantification (1)
- Self-assembled monolayer (1)
- Self-assembled monolayers (SAM) (1)
- Semivolatile organic compounds (1)
- Sensors (1)
- Sequence annotation (1)
- Sewage Sludge (1)
- Sewage Sludge Ashes (1)
- Sewage sludge ash (SSA) (1)
- Sewage sludge disposal (1)
- Short crack propagation (1)
- Silica and polystyrene nanoparticles (1)
- Silicate (1)
- Silicon carbide (1)
- Silver (1)
- Single cell (1)
- Single cell microbiology (1)
- Size exclusion chromatography (1)
- Size resolved chemical composition (1)
- Social Immunity (1)
- Social immunity (1)
- Social insect (1)
- Sociality (1)
- Software (1)
- Soil contact (1)
- Soil incubation study (1)
- Soil-feeding habit (1)
- Soil-like material (1)
- Soils (1)
- Solar panels (1)
- Soldier (1)
- Solid phase extraction (SPE) (1)
- Solid-liquid extraction (1)
- Solid-phase extraction (SPE) (1)
- Solitary bees (1)
- Solute excretion (1)
- Solvents (1)
- Solvolysis (1)
- Sorption (1)
- Spectroscopy (1)
- Standardization (1)
- Steelmaking residues (1)
- Stoichiometric homeostasis (1)
- Stone cultural heritage (1)
- Stop/flow experiments model (1)
- Strategy and Management (1)
- Stress conditions (1)
- Stress tolerance (1)
- Sub-4nm particles (1)
- Subaerial biofilms (1)
- Subjective complaints (1)
- Subsocial (1)
- Subsoil nutrient tracing (1)
- Sugar cane bagasse (1)
- Sum parameter (1)
- Suppression (1)
- Surface interactions (1)
- Surface water (1)
- Surface waters (1)
- Survival rates (1)
- Synchrotron (1)
- Synchrotron radiation (1)
- Synergy (1)
- Synthesis (1)
- Synthetic metabolism (1)
- Synthetic organic pigments (1)
- Systematics (1)
- Targeted and nontargeted (1)
- Targeting, Nanoparticles (1)
- Taxonomy (1)
- Temperate rain forest (1)
- Temple Scroll (1)
- Tems (1)
- Terbutryn (1)
- Termitoidae (1)
- Thermal analysis (1)
- Thermal degradation (1)
- Thermo-desorption (1)
- Thermochemical treatment (1)
- Thermocouple (1)
- Thermodynamic (1)
- Thioimidazolium (1)
- Time resolved chemical composition (1)
- Torah scrolls (1)
- Touch surfaces (1)
- Tripartite interactions (1)
- UV radiation (1)
- UV-irradiation (1)
- Ultrastructure (1)
- Umweltmessung (1)
- Up-cycling (1)
- Ureolytic bacteria (1)
- Utilisation (1)
- VOC emission (1)
- Validation trial (1)
- Vanadium (1)
- Viruses (1)
- Vitriolic iron-gall inks (1)
- Waste incineration (1)
- Waste management (1)
- Waste treatment (1)
- Water (1)
- Water atmosphere (1)
- Water contact (1)
- Water stable isotope analysis (1)
- Water uptake (1)
- Weld fatigue (1)
- Weld toe geometry (1)
- White-rot fungi (1)
- Wood Modification (1)
- Wood ash (1)
- Wood samples (1)
- Wooden toys (1)
- Writing materials (1)
- X-Ray analysis (1)
- X-ray adsorption near-edge structure (XANES) spectroscopy (1)
- X-ray diffraction (XRD) (1)
- X-ray fuorescence (1)
- X-ray spectroscopy (1)
- X-ray tomographic (1)
- XRF (1)
- XRF imaging (1)
- XRF ink analysis (1)
- Yeast (1)
- ZIF (1)
- ZIF-8 (1)
- Zearalenone (1)
- Zearalenone sulfate (1)
- Zeolithe (1)
- Zinc (1)
- Zinc chloride (1)
- Zinc oxide (1)
- a-zearalenol (1)
- dsDAN monolayer (1)
- fertilizer (1)
- iChip (1)
- microspectroscopy (1)
- pH (1)
- pH probe (1)
- pH sensor (1)
- pHe (1)
- qPCR (1)
- soil (1)
- x-ray diffraction (1)
- ‘Green’ pesticide (1)
Organisationseinheit der BAM
- 4 Material und Umwelt (259) (entfernen)
Paper des Monats
- ja (18)
The long-term leaching behavior of incineration bottom ash (IBA) was studied with large-scale samples from two German waste incinerators with grate technology. The observation period was up to 281 days. The aging processes proceeded faster in the outdoor storage of the samples. The dominant factor in the leaching behavior is the pH, which starts at values above 12 and decreases to values below 10 (outdoors, <11 indoors). Most heavy metals exhibit minimum solubility in this pH range. The solubility of Sb depends on the prevailing Ca concentration, due to the formation of low-soluble Ca antimonate. The very low sulfate concentrations observed in the leaching tests with fresh IBA could be explained by the presence of ettringite. In the course of the aging reaction, ettringite is transformed into gypsum. The results from batch tests were compared with those from column tests, showing reasonable agreement. Leaching dynamics can be better followed with column tests. All results confirm that the use of IBA is possible under German law.
For the first time, µ-X-ray fluorescence (µ-XRF) mapping combined with fluorine K-edge µ-X-ray absorption near-edge structure (µ-XANES) spectroscopy was applied to depict per- and polyfluoroalkyl substances (PFAS) contamination and inorganic fluoride in samples concentrations down to 100 µg/kg fluoride. To demonstrate the matrix tolerance of the method, several PFAS contaminated soil and sludge samples as well as selected consumer product samples (textiles, food contact paper and permanent baking sheet) were investigated. µ-XRF mapping allows for a unique element-specific visualisation at the sample surface and enables localisation of fluorine containing compounds to a depth of 1 µm. Manually selected fluorine rich spots were subsequently analysed via fluorine K-edge µ-XANES spectroscopy. To support spectral interpretation with respect to inorganic and organic chemical distribution and compound class determination, linear combination (LC) fitting was applied to all recorded µ-XANES spectra. Complementarily, solvent extracts of all samples were target-analysed via LC-MS/MS spectrometry. The detected PFAS sum values range from 20 to 1136 µg/kg dry weight (dw). All environmentally exposed samples revealed higher concentration of PFAS with a chain length >C8 (e.g. 580 µg/kg dw PFOS for Soil1), whereas the consumer product samples showed a more uniform distribution with regard to chain lengths from C4 to C8. Independent from quantified PFAS amounts via target analysis, µ-XRF mapping combined with µ-XANES spectroscopy was successfully applied to detect both point-specific concentration maxima and evenly distributed surface coatings of fluorinated organic contaminants in the corresponding samples.
Solid wastewater-based fertilizers were screened for per- and polyfluoroalkyl substances (PFAS) by the extractable organic fluorine (EOF) sum parameter method. The EOF values for ten sewage sludges from Germany and Switzerland range from 154 to 7209 mg kg−1. For thermal treated sewage sludge and struvite the EOF were lower with values up to 121 mg kg−1. Moreover, the application of PFAS targeted
and suspect screening analysis of selected sewage sludge samples showed that only a small part of the EOF sum parameter values can be explained by the usually screened legacy PFAS. The hitherto unknown part of EOF sum parameter contains also fluorinated pesticides, pharmaceutical and aromatic compounds. Because these partly fluorinated compounds can degrade to (ultra-)short PFAS in wastewater treatment plants they should be considered as significant sources of organic fluorine in the environment. The combined results of sum parameter analysis and suspect screening reveal the need to update current regulations, such as the German fertilizer ordinance, to focus not solely on a few selected PFAS such as perfluorooctane sulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) but
consider an additional sum parameter approach as a more holistic alternative. Moreover, diffusion gradient in thin-films (DGT) passive samplers were utilized as an alternative simplified extraction method for PFAS in solid wastewater-based fertilizers and subsequently quantified via combustion ion chromatography. However, the DGT method was less sensitive and only comparable to the EOF values
of the fertilizers in samples with >150 mg kg−1, because of different diffusion properties for various PFAS, but also kinetic exchange limitations.
Half of global material consumption involves mineral material. The circularity is still low so that the enhanced use of secondary building material is required to close loops. Three different secondary building materials are discussed based on exemplary research results: construction and demolition waste (C&D waste), soil-like material, and incineration bottom ash (IBA). Focus was placed on the environmental compatibility of the materials examined mainly by standardized leaching tests. C&D waste was investigated after a wet treatment using a jigging machine, and soil-like material and IBA were characterized with respect to their material composition. Their environmental compatibilities in particular were studied using standard leaching tests (batch tests and column tests).
It was concluded that soil-like material can mostly be utilized even when the precautionary limit values set are exceeded by a factor of less than two. For C&D waste, the fine fraction below 2 mm and the content of brick material is problematic. IBA fulfills quality level “HMVA-2” following German regulations. Improved levels of utilization might be achievable with better treatment technologies.
Industrial and agricultural waste streams (waste water, sludges, tailings, etc.) which contain high concentrations of NH4+, PO43–, and transition metals are environmentally harmful and toxic pollutants. At the same time, phosphorous and transition metals constitute highly valuable resources. Typically, separate pathways have been considered to extract hazardous transition metals or phosphate independently from each other. Investigations on the simultaneous removal of multiple components have been carried out only to a limited extent. Here, we report the synthesis routes for Ni- and Co-struvites (NH4MPO4·6H2O, M = Ni2+ and Co2+), which allow for P, ammonia, and metal co-precipitation. By evaluating different reaction parameters, the phase and stability of transition metal struvites as well as their crystal morphologies and sizes could be optimized. Ni-struvite is stable in a wide reactant concentration range and at different metal/phosphorus (M/P) ratios, whereas Co-struvite only forms at low M/P ratios. Detailed investigations of the precipitation process using ex situ and in situ techniques provided insights into the crystallization mechanisms/crystal engineering of these materials. M-struvites crystallize via intermediate colloidal amorphous nanophases, which subsequently aggregate and condense to final crystals after extended reaction times. However, the exact reaction kinetics of the formation of a final crystalline product varies significantly depending on the involved metal cation in the precipitation process: several seconds (Mg) to minutes (Ni) to hours (Co). The achieved level of control over the morphology and size makes precipitation of transition metal struvites a promising method for direct metal recovery and binding them in the form of valuable phosphate raw materials. Under this paradigm, the crystals can be potentially up-cycled as precursor powders for electrochemical or (electro)catalytic applications, which require transition metal phosphates.
Electron microscopy (EM) is the gold standard for the characterisation of the morphology (size and shape) of nanoparticles. Visual observation of objects under examination is always a necessary first step in the characterisation process. Several questions arise when undertaking to identify and count particles to measure their size and shape distribution. In addition to challenges with the dispersion and identification of the particles, more than one protocol for counting particles is in use. This paper focuses on precise rules for the counting of particles in EM micrographs, as this influences the measurement accuracy of the number of particles, thus implicitly affecting the size values of the counted particles. We review and compare four different, commonly used methods for counting, which we then apply in case studies. The impact of the selected counting rule on the obtained final particle size distribution is highlighted. One main aim of this analysis is to support the application of a specific, well-defined counting approach in accordance with regulatory
requirements to contribute to achieving more reliable and reproducible results. It is also useful for the new harmonised measurement procedures for determining the particle size and particle size distribution of nanomaterials.
Background: Host–pathogen interactions can lead to dramatic changes in host feeding behaviour. One aspect of this includes self-medication, where infected individuals consume substances such as toxins or alter their macronutrient consumption to enhance immune competence. Another widely adopted animal response to infection is illness-induced anorexia, which is thought to assist host immunity directly or by limiting the nutritional resources available to pathogens. Here, we recorded macronutrient preferences of the global pest cockroach, Blatta orientalis to investigate how shifts in host macronutrient dietary preference and quantity of carbohydrate (C) and protein (P) interact with immunity following bacterial infection.
Results: We fnd that B. orientalis avoids diets enriched for P under normal conditions, and that high P diets reduce cockroach survival in the long term. However, following bacterial challenge, cockroaches signifcantly reduced their overall nutrient intake, particularly of carbohydrates, and increased the relative ratio of protein (P:C) consumed. Surprisingly, these behavioural shifts had a limited efect on cockroach immunity and survival, with minor changes to immune protein abundance and antimicrobial activity between individuals placed on diferent diets, regardless of infection status.
Conclusions: We show that cockroach feeding behaviour can be modulated by a pathogen, resulting in an illness-induced anorexia-like feeding response and a shift from a C-enriched to a more P:C equal diet. However, our results also indicate that such responses do not provide signifcant immune protection in B. orientalis, suggesting that the host’s dietary shift might also result from random rather than directed behaviour. The lack of an apparent beneft of the shift in feeding behaviour highlights a possible reduced importance of diet in immune regulation in these invasive animals, although further investigations employing pathogens with alternative infection strategies are warranted.
Nine different bacterial isolates were recovered from landfills. Each isolate was obtained in pure culture. As a consortium, the bacteria degrade polyethylene. The complete genome sequence of strain G2 was determined by PacBio sequencing. Using the TYGS server for taxonomic classification, strain G2 was assigned to the species Pseudomonas veronii.
Antimicrobial resistance (AMR) is a global health problem with the environment being an important compartment for the evolution and transmission of AMR. Previous studies showed that de-novo mutagenesis and horizontal gene transfer (HGT) by conjugation or transformation – important processes underlying resistance evolution and spread - are affected by antibiotics, metals and pesticides. However, natural microbial communities are also frequently exposed to biocides used as material preservatives, but it is unknown if these substances induce mutagenesis and HGT. Here, we show that active substances used in material preservatives can increase rates of mutation and conjugation in a species- and substance-dependent manner, while rates of transformation are not increased. The bisbiguanide chlorhexidine digluconate, the quaternary ammonium compound didecyldimethylammonium chloride, the metal copper, the pyrethroid-insecticide permethrin, and the azole-fungicide propiconazole increase mutation rates in Escherichia coli, whereas no increases were identified for Bacillus subtilis and Acinetobacter baylyi.
Benzalkonium chloride, chlorhexidine and permethrin increased conjugation in E. coli. Moreover, our results show a connection between the RpoS-mediated general stress and the RecA-linked SOS response with increased rates of mutation and conjugation, but not for all biocides. Taken together, our data show the importance of assessing the contribution of material preservatives on AMR evolution and spread.
Vaccination is defined as the stimulation and development of the adaptive immune system by administering specific antigens. Vaccines' efficacy, in inducing immunity, varies in different societies due to economic, social, and biological conditions. One of the influential biological factors is gut microbiota. Cross-talks between gut bacteria and the host immune system are initiated at birth during microbial colonization and directly control the immune responses and protection against pathogen colonization. Imbalances in the gut microbiota composition, termed dysbiosis, can trigger several immune disorders through the activity of the adaptive immune system and impair the adequate response to the vaccination. The bacteria used in probiotics are often members of the gut microbiota, which have health benefits for the host. Probiotics are generally consumed as a component of fermented foods, affect both innate and acquired immune systems, and decrease infections. This review aimed to discuss the gut microbiota's role in regulating immune responses to vaccination and how probiotics can help induce immune responses against pathogens. Finally, probiotic-based oral vaccines and their efficacy have been discussed.
Release of substances from joint grouts based on various binder types and their ecotoxic effects
(2022)
Background: The leaching of substances and the ecotoxic effects of eluates were studied for joint grouts that are based on various types of binders. Eight products, two of them containing either epoxy resin, polybutadiene or polyurethane binders, or modifed cement, were investigated using harmonized leaching tests for construction products in combination with ecotoxicity tests on algae, daphnia, luminescent bacteria, fish eggs and mutagenicity in accordance with CEN/TR 17105. In addition to basic parameters, such as pH, TOC, and inorganic components, organic substances in the eluates were analysed by gas and liquid chromatography in combination with mass spectrometry. Quantitative analyses in combination with ecotoxicity data on selected substances were used to deduce which substances cause the observed ecotoxic effects.
Results: Different patterns of ecotoxic effects were observed in joint grouts with different binder types. The most ecotoxic effects were observed in epoxy resin-based products, followed by polybutadiene-based products. Fewer ecotoxic effects were observed in polyurethane-based products and modifed cements. Some of these showed no ecotoxicity. Some of the substances in the eluates were identified and related to ecotoxic effects. 4-Tert-butylphenol and amines probably contributed to the ecotoxic effects of at least one of the epoxy resin-based renders, whereas cobalt is assumed to contribute to the toxic effect on algae of one of the polybutadiene-based products. However, only some of the leached substances could be identifed, and only some of the ecotoxic effects can be explained by the available information on the composition of eluates and known ecotoxic profiles of the identified substances.
Conclusions: Ecotoxicity tests on eluates from leaching tests indicate whether environmentally hazardous substances can be leached from construction products. Combined ecotoxicity tests and chemical analysis of eluates from EU-wide harmonized leaching tests for construction products can provide information on substances that cause these effects. This supports the identifcation and development of environmentally friendly construction products.
This study confirmed that ecotoxicity tests in accordance with CEN/TR 17105 are a tool well-suited to support the implementation of the European Commission’s zero pollution vision for 2050 and to reduce pollution to levels no longer considered harmful to health and natural ecosystems.
The development of the microbiologically influenced corrosion ( MIC ) -specific inductively coupled plasma-time of flight-mass spectrometry ( ICP-ToF-MS ) analytical method presented here, in combination with the investigation of steel-MIC interactions, contributes significantly to progress in instrumental MIC analysis. For this, a MIC-specific staining procedure was developed, which ensures the analysis of intact cells. It allows the analysis of archaea at a single cell level, which is extremely scarce compared to other well-characterized organisms. The detection method revealed elemental selectivity for the corrosive methanogenic strain Methanobacterium -affiliated IM1. Hence, the possible uptake of individual elements from different steel samples was investigated and results showed the cells responded at a single-cell level to the different types of supplemented elements and displayed the abilities to uptake chromium, vanadium, titanium, cobalt, and molybdenum from solid metal surfaces. The methods developed and information obtained will be used in the future to elucidate underlying mechanisms, compliment well-developed methods, such as SEM-EDS, and develop novel material protection concepts.
Weather conditions affect biocides on exposed outer surfaces on constructions. Contact with water causes hydrolysis and leaching of substances. Ultraviolet radiation may induce photolysis. As a result, a mixture of biocidal active substances and transformation products can be emitted into the environment. In a semi-field study, leaching of the biocidal active substances terbutryn, diuron, octylisothiazolinone, carbendazim, and selected transformation products was observed for two paints containing either a white or a red pigment. Painted test panels were exposed to natural weathering for about 1.5 years. Runoff samples were analyzed during the course of the experiment.
At the end of the study, residues of biocidal active substances and transformation products were determined in sections of the test panels. Emissions of substances were mainly observed during the first few months of the experiments. Increased emissions of transformation products were observed during periods of increased global radiation and subsequent periods with relatively high amounts of driving rain. Different patterns of transformation products were observed, especially for terbutryn, both for paints containing different pigments and in experiments that were started in different periods of the year, as well as during different periods of the experiments.
Nutrient acquisition strategies of plants regulate water flow and mass transport within ecosystems, shaping earth surface processes. Understanding plant strategies under current conditions is important to assess and predict responses of natural ecosystems to future climate and environmental changes. Nitrogen (N) and potassium (K) (re-)utilization from topsoil and their acquisition from subsoil and saprolite were evaluated in a continental transect, encompassing three study sites – an arid shrubland, a mediterranean woodland, and a temperate rainforest – on similar granitoid parent material in the Chilean Coastal Cordillera. The short-term (<1 year) plant N and K acquisition was traced with 15N and the K analogs rubidium and cesium. To do so, the tracers were either injected into topsoil, subsoil, or saprolite, in the immediate vicinity of eight individual plants per study site and injection depth. The long-term (>decades) K uplift by plants was investigated by the vertical distribution of exchangeable K+ and Na+. Recoveries of 15N and K analogs by arid shrubland plants were similar from topsoil, subsoil, and saprolite. Mediterranean woodland shrubs recovered the tracers primarily from topsoil (i.e., 89 % of recovered 15N and 84 % of recovered K analogs). Forest plants recovered the tracers from topsoil (15N = 49 %, K analogs = 57 %) and partially from greater depth: 38 % of recovered 15N and 43 % of recovered K analogs were acquired from subsoil and saprolite, respectively. Low nutrient accessibility in the topsoil (e.g., because of frequent droughts) drives shrubland plants to expand their N and K uptake to deeper and moister soil and saprolite. Woodland and forest plants dominantly recycled nutrients from topsoil. In the forest, this strategy was complemented by short-term uplift of N and K from depth. The vertical distribution of exchangeable K indicated long-term uplift of K by roots in all three sites. This highlighted that long-term K uplift from depth complements the nutrient budget across the continental transect.
Buildings exposed to water can release undesirable substances which, once transported to environmental compartments, may cause unwanted effects. These exposure pathways need to be investigated and included in risk assessments to safeguard water quality and promote the sustainability of construction materials. The applied materials, exposure conditions, distribution routes and resilience of receiving compartments vary considerably. This demonstrates the need for a consistent concept that integrates knowledge of emission sources, leaching processes, transport pathways, and effects on targets. Such a consistent concept can serve as the basis for environmental risk assessment for several scenarios using experimentally determined emissions. Typically, a source–path–target concept integrates data from standardized leaching tests and models to describe leaching processes, the distribution of substances in the environment and the occurrence of substances at different points of compliance. This article presents an integrated concept for assessing the environmental impact of construction products on aquatic systems and unravels currently existing gaps and necessary actions. This manuscript outlines a source–path–target concept applicable to a large variety of construction products. It is intended to highlight key elements of a holistic evaluation concept that could assist authorities in developing procedures for environmental risk assessments and mitigation measures and identifying knowledge gaps.
Nine different bacterial isolates were recovered from landfills. Each isolate was obtained in pure culture. As a consortium, the bacteria degrade polyethylene. The complete genome sequence of strain G9 was determined by PacBio sequencing. Using the TYGS server for taxonomic classification, strain G9 was assigned to the species Micromonospora aurantiaca.
Evolution relies on the availability of genetic diversity for fitness-based selection. However, most deoxyribonucleic acid (DNA) viruses employ DNA polymerases (Pol) capable of exonucleolytic proofreading to limit mutation rates during DNA replication. The relative genetic stability produced by high-fidelity genome replication can make studying DNA virus adaptation and evolution an intensive endeavor, especially in slowly replicating viruses. Here, we present a proofreading-impaired Pol mutant (Y547S) of Marek’s disease virus that exhibits a hypermutator phenotype while maintaining unimpaired growth in vitro and wild-type (WT)-like pathogenicity in vivo. At the same time, mutation frequencies observed in Y547S virus populations are 2–5-fold higher compared to the parental WT virus. We find that Y547S adapts faster to growth in originally non-permissive cells, evades pressure conferred by antiviral inhibitors more efficiently, and is more easily attenuated by serial passage in cultured cells compared to WT. Our results suggest that hypermutator viruses can serve as a tool to accelerate evolutionary processes and help identify key genetic changes required for adaptation to novel host cells and resistance to antiviral therapy. Similarly, the rapid attenuation achieved through adaptation of hypermutators to growth in cell culture enables identification of genetic changes underlying attenuation and virulence, knowledge that could practically exploited, e.g. in the rational design of vaccines.
Rock weathering is a key process in global elemental cycling. Life participates in this process with tangible consequences observed from the mineral interface to the planetary scale. Multiple lines of evidence show that microorganisms may play a pivotal—yet overlooked—role in weathering. This topic is reviewed here with an emphasis on the following questions that remain unanswered: What is the quantitative contribution of bacteria and fungi to weathering? What are the associated mechanisms and do they leave characteristic imprints on mineral surfaces or in the geological record? Does biogenic weathering fulfill an ecological function, or does it occur as a side effect of unrelated metabolic functions and biological processes? An overview of efforts to integrate the contribution of living organisms into reactive transport models is provided. We also highlight prospective opportunities to harness microbial weathering in order to support sustainable agroforestry practices and mining activities, soil remediation, and carbon sequestration.
The diffusive gradients in thin-films (DGT) technique shows in many publications a superior correlation to the amount of plant-available phosphorus (P) in soil. However, this technique cannot give information on the plant-available P species in soil. Therefore, we combined DGT with solution 31P nuclear magnetic resonance (NMR) spectroscopy. This was achieved by using a modified DGT device in which the diffusive layer had a larger pore size, the binding layer incorporated an adsorption material with a higher capacity, and the device had a larger exposure area. The spectroscopic investigation was undertaken after elution of the deployed DGT binding layer in a NaOH solution. Adsorption tests using solutions of known organic P compounds showed that a sufficient amount of these compounds could be adsorbed on the binding layer in order for them to be analyzed by solution 31P NMR spectroscopy. Furthermore, various intermediates of the hydrolysis of trimetaphosphate in soil could be also analyzed over time.
Black microcolonial fungi (Ascomycetes from Arthonio-, Dothideo-, and Eurotiomycetes) are stress-tolerant and persistent dwellers of natural and anthropogenic extreme habitats. They exhibit slow yeast-like or meristematic growth, do not form specialized reproduction structures and accumulate the black pigment 1,8-dihydroxynaphthalene (DHN) melanin in the multilayered cell walls. To understand how black fungi live, survive, colonize mineral substrates, and interact with phototrophs genetic methods are needed to test these functions and interactions. We chose the rock inhabitant Knufia petricola of the Chaetothyriales as a model for developing methods for genetic manipulation. Here, we report on the expansion of the genetic toolkit by more efficient multiplex CRISPR/Cas9 using a plasmid-based system for expression of Cas9 and multiple sgRNAs and the implementation of the three resistance selection markers genR (geneticin/nptII), baR (glufosinate/bar), and suR (chlorimuron ethyl/sur). The targeted integration of expression constructs by replacement of essential genes for pigment synthesis allows for an additional color screening of the transformants. The black-pink screening due to the elimination of pks1 (melanin) was applied for promoter studies using GFP fluorescence as reporter. The black-white screening due to the concurrent elimination of pks1 and phs1 (carotenoids) allows to identify transformants that contain the two expression constructs for co-localization or bimolecular fluorescence complementation (BiFC) studies. The co-localization and interaction of the two K. petricola White Collar orthologs were demonstrated. Two intergenic regions (igr1, igr2) were identified in which expression constructs can be inserted without causing obvious phenotypes. Plasmids of the pNXR-XXX series and new compatible entry plasmids were used for fast and easy generation of expression constructs and are suitable for a broad implementation in other fungi. This variety of genetic tools is opening a completely new perspective for mechanistic and very detailed study of expression, functioning and regulation of the genes/proteins encoded by the genomes of black fungi.