4 Material und Umwelt
Filtern
Dokumenttyp
- Zeitschriftenartikel (341) (entfernen)
Sprache
- Englisch (299)
- Deutsch (38)
- Chinesisch (2)
- Italienisch (1)
- Polnisch (1)
Schlagworte
- Leaching (14)
- Biocides (10)
- Phosphorus (10)
- Sewage sludge (9)
- Archaeometry (8)
- Bacteria (8)
- Bottom ash (8)
- Circular economy (7)
- Antimicrobial resistance (6)
- Biofilm (6)
- Construction products (6)
- Biofilms (5)
- Black fungi (5)
- DRIFTS (5)
- Ectoine (5)
- Evolution (5)
- Fertilizer (5)
- Fungi (5)
- Inks (5)
- Non-destructive testing (5)
- Phosphorus recovery (5)
- Thermal desorption (5)
- VOC (5)
- Degradation (4)
- Ecotoxicity (4)
- Ersatzbaustoffe (4)
- Gas chromatography (4)
- Incineration bottom ash (4)
- Ink (4)
- Klärschlamm (4)
- Mixed ink (4)
- Non-invasive analysis (4)
- PFAS (4)
- Papyrus (4)
- Polyethylene (4)
- Raman spectroscopy (4)
- Recycling (4)
- Reverse glass painting (4)
- Struvite (4)
- Termites (4)
- Wastewater (4)
- Wood protection (4)
- X-ray absorption near-edge structure (XANES) spectroscopy (4)
- XANES spectroscopy (4)
- Bio-weathering (3)
- Biodeterioration (3)
- Corrosion (3)
- DHN melanin (3)
- Diffusive gradients in thin films (DGT) (3)
- Disinfection (3)
- Emission test chamber (3)
- Fertilzer (3)
- Geosynthetics (3)
- Geotextiles (3)
- Holzschutz (3)
- Indoor air quality (3)
- Ink analysis (3)
- Interlaboratory comparison (3)
- Knufia petricola (3)
- MIC (3)
- Manuscripts (3)
- NAP-XPS (3)
- Osmoadaptation (3)
- Pathogen (3)
- Phosphat (3)
- Phosphor (3)
- Phosphorus fertilizer (3)
- Renewable Energy, Sustainability and the Environment (3)
- Rostasche (3)
- Scandium (3)
- Sewage sludge ash (3)
- Soil (3)
- Standardisation (3)
- TXRF (3)
- Termite (3)
- Thermal treatment (3)
- Ultrafine particles (3)
- VVOC (3)
- Volatile organic compounds (3)
- Wood Protection (3)
- Zinc (3)
- Aerosol (2)
- Air pollution (2)
- Air quality monitoring (2)
- Air sampling (2)
- Analytical methods (2)
- Antimicrobial (2)
- Atomic and Molecular Physics and Optics (2)
- BEMMA (2)
- Bacterial adhesion (2)
- Bauprodukte (2)
- Biocorrosion (2)
- Bioinformatics (2)
- Bioreceptivity (2)
- Brown-rot fungi (2)
- Building and Construction (2)
- CRISPR/Cas9 (2)
- Cannibalism (2)
- Carbon ink (2)
- Cascade impactor (2)
- Circular Economy (2)
- Colourants (2)
- Combustion ion chromatography (2)
- Combustion ion chromatography (CIC) (2)
- Condensed Matter Physics (2)
- Coptic (2)
- Corrosion evolution (2)
- Cultural heritage (2)
- DNA (2)
- Dead Sea Scrolls (2)
- Density separation (2)
- Design of experiments (2)
- Disposal repository (2)
- ESEM (2)
- Electric arc furnace dust (2)
- Electron microscopy (2)
- Emission (2)
- Energy Engineering and Power Technology (2)
- Entomopathogen (2)
- Environment (2)
- Ersatzbaustoff (2)
- Extracellular polymeric substances (2)
- Extractable organically bound fluorine (EOF) (2)
- Fluoride (2)
- Forsterite (2)
- Fuel Technology (2)
- Fungus (2)
- Geokunststoffe (2)
- Geruchsmessung (2)
- Gut microbiota (2)
- Halomonas elongata (2)
- Hazard properties (2)
- High resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) (2)
- Horizontal gene transfer (2)
- ICP-MS (2)
- ISO 16000-6 (2)
- Immunity (2)
- Insect biotechnology (2)
- Iron-gall ink (2)
- Isoptera (2)
- Keratin (2)
- Klärschlammverordnung (2)
- Kreislaufwirtschaft (2)
- Kulturelle Entomologie (2)
- LC-MS/MS (2)
- Langzeitverhalten (2)
- Lapis lazuli (2)
- Laser processing (2)
- Laser-induced periodic surface structures (LIPSS) (2)
- Leaching control mechanisms (2)
- Leaching tests (2)
- Lysimeter (2)
- MOF (2)
- Magnesium (2)
- Marine littering (2)
- Mechanochemistry (2)
- Melting experiments (2)
- Metabolomics (2)
- Method development (2)
- Micro-XRF (2)
- Microbiologically influenced corrosion (2)
- Microbiota (2)
- Microcolonial fungi (2)
- Micropatterning (2)
- Microplastic (2)
- NanoSIMS (2)
- Nanoparticles (2)
- Non-destructiv testing (2)
- Nosema ceranae (2)
- Nuclear waste (2)
- Osmia bicornis (2)
- PGAA (2)
- PIXE (2)
- Particles (2)
- Passive sampling (2)
- Per- and polyfluoroalkyl substances (PFAS) (2)
- Pigment (2)
- Pigment analyses (2)
- Pigment identification (2)
- Polyglycerol (2)
- Provenance studies (2)
- Pseudomonas aeruginosa (2)
- Raman (2)
- Recovery (2)
- Recycling fertilizer (2)
- Reference material (2)
- Secondary building materials (2)
- Social (2)
- Stress tolerance (2)
- Struvit (2)
- Subaerial biofilms (2)
- Substance release (2)
- Symbiosis (2)
- Tantal (2)
- Thermochemical treatment (2)
- Tineola bisselliella (2)
- Transcriptomics (2)
- Transformation (2)
- Virology (2)
- Virulence (2)
- Waste treatment (2)
- Waste-to-energy (2)
- Weathering (2)
- Wild bees (2)
- X-ray diffraction (2)
- XANES (2)
- XPS (2)
- XRF (2)
- pH sensor (2)
- (Semi)arid to humid-temperate natural ecosys (1)
- 13CO2 pulse labeling (1)
- 13th century (1)
- 16S rRNA gene (1)
- 2D nanomaterials (1)
- 3D printer (1)
- 3D printing (1)
- A key interface (1)
- A-DNA conformation (1)
- AEROMET II (1)
- AEROMET project (1)
- ATR-FTIR (1)
- Abfallbehandlung (1)
- Abfalltrennung (1)
- Abfallverbrennung (1)
- Abfälle (1)
- Abwasser (1)
- Abwasserreinigung (1)
- Accelerated aging (1)
- Accuracy (1)
- Acidobacteria (1)
- Adaptation (1)
- Adaption (1)
- Additive Manufacturing (1)
- Adipokinetic hormone (1)
- Adipokinetic hormone receptor (1)
- Adsorbable organically bound fluorine (AOF) (1)
- Advanced groups of termites (1)
- Aerodynamic levitation (1)
- Aerosol gravimetry (1)
- Aerosol measurement instruments (1)
- Aerosols (1)
- Aerosolsensor (1)
- Affinity chromatography (1)
- Ag-LDI-MS (1)
- Aging (1)
- Aging tests (1)
- Agricultural mycology (1)
- Agronomic performance (1)
- Agronomische Effizienz (1)
- Air analysis (1)
- Air pollution control (1)
- Alexander von Humboldt (1)
- Alkylating agents (1)
- Ambient aerosols (1)
- Ammonium (1)
- Amphiphilic polymer (1)
- Amplicon sequencing (1)
- Anaerobic pathways (1)
- Analytical Chemistry (1)
- Analytical screening techniques (1)
- Ancient document production (1)
- Animal immune system (1)
- Anobium punctatum (1)
- Anpassung (1)
- Antagonism (1)
- Antibacterial (1)
- Antibacterial coatings (1)
- Antibacterial polymer (1)
- Antibacterial surfaces (1)
- Antibiotic resistance (1)
- Antibiotics (1)
- Antibodies (1)
- Antifouling (1)
- Antimicrobial coating (1)
- Antimicrobial materials (1)
- Antimicrobial surfaces (1)
- Antimicrobial test (1)
- Antimicrobial testing (1)
- Antimicrobials (1)
- Antimony (1)
- Antimony black (stibnite) (1)
- Antiseptic agents (1)
- Aquatic fungi (1)
- Aqueous synthesis (1)
- Arbuscular mycorrhiza (1)
- Archaea (1)
- Architecture (1)
- Artificial ageing (1)
- Artificial weathering (1)
- Ascosphaera apis (1)
- AshDec (1)
- Ashes (1)
- Aspergillus (1)
- Assessment (1)
- Astrobiology (1)
- Aufbereitung (1)
- Auslaugtest (1)
- Automated analysis (1)
- BAM Data Store (1)
- BAM-Zulassung (1)
- BESSY (1)
- BODIPY (1)
- BOFS (1)
- BTEX (1)
- Bacillus subtilis (1)
- Bacterial attachment (1)
- Bacterial cell cycle (1)
- Bacterial second messenger (1)
- Bagasse (1)
- Basidiomycetes (1)
- Basin (1)
- Bassanite (1)
- Batch tests (1)
- Bathyarchaeia (1)
- Bauxite Residue (1)
- Bauxite residue (1)
- Bawit (1)
- Bee diseases (1)
- Bee health (1)
- Behavioural mechanisms (1)
- Beneficial microbes (1)
- Beschichtung (1)
- Bewertungsverfahren (1)
- Bio-P-Kläranlage (1)
- Bio-based insulation (1)
- Bioceramics (1)
- Biocide tolerance (1)
- Biodeterioration and biodegradation (1)
- Biofilm formation (1)
- Biofilm quantification (1)
- Biofouling (1)
- Biogenic weathering (1)
- Bioinformatics virology viruses software (1)
- Biokorrosion (1)
- Biological pest control (1)
- Biologische Schädlingsbekämpfung (1)
- Biomimetic (1)
- Biosynthesis (1)
- Biotests (1)
- Biotic environment (1)
- Biozide (1)
- Biphasic growth (1)
- Black microcolonial fungi (1)
- Black writing ink (1)
- Blast furnace sludge (1)
- Blast-furnace sludge (1)
- Blattodea (1)
- Boden (1)
- Bodenmaterialien (1)
- Botrytis cinerea (1)
- Building Material (1)
- Building materials (1)
- Built environment (1)
- Bushveld Complex (1)
- C-di-GMP (1)
- CCQM (1)
- CEC-L-103 (1)
- CEN (1)
- CHC (1)
- COST action CA15114 AMICI (1)
- CPC calibration (1)
- CaNaPO4 (1)
- Calcareous deposits (1)
- Calcium alkali phosphate (1)
- Calcium carbonate (1)
- Calcium silicate (1)
- Calcium sulfate (1)
- Calibration transfer (1)
- Carbon steel (1)
- Carbon steel corrosion (1)
- Carolingian (1)
- Cathodic protection (1)
- Cell appendages (1)
- Cell studies (1)
- Cell-envelope (1)
- Cellulose ether (1)
- Cellulose synthase (1)
- Cerium oxide (1)
- Characterisation (1)
- Chemical analysis (1)
- Chemical durability (1)
- Chemical ecology (1)
- Chemical extraction (1)
- Chemical extraction methods (1)
- Chemical recycling (1)
- Chemicals (1)
- Chemische Löslichkeit (1)
- Chemisches Recycling (1)
- Chicken manure ash (1)
- Chilean Coastal Cordillera (1)
- Chlorination (1)
- Chlorine (1)
- Chromitites (1)
- Clean steel (1)
- Cleridae (1)
- Climate gradient (1)
- Cloning vectors (1)
- Close proximity to colonies (1)
- Cobalt (1)
- Cockroach (1)
- Cockroaches (1)
- Codex (1)
- Cognitive performance (1)
- Coleoptera (1)
- Colorants (1)
- Colored glasses (1)
- Colouring (1)
- Combustion Ion Chromatography (1)
- Combustion and gasification (1)
- Community composition (1)
- Community-level interactions (1)
- Comparison (1)
- Compatible solute (1)
- Comsumer good samples (1)
- Concept (1)
- Concrete (1)
- Confocal microscopy (1)
- Coniophora puteana (1)
- Conjugate (1)
- Conjugation (1)
- Conservation (1)
- Constantinomyces (1)
- Construction materials (1)
- Construction product (1)
- Construction products regulation (CPR) (1)
- Consumer products (1)
- Contamination (1)
- Contraction (1)
- Control (1)
- Copper (1)
- Copper-based wood preservatives (1)
- Coptic manuscripts (1)
- Coptic papyri (1)
- Coptotermes (1)
- Core microbiome (1)
- Corrosion environment (1)
- Corundum (1)
- Critical raw materials (1)
- Cross-feeding (1)
- Cross-resistance (1)
- Cross-sectioning (1)
- Cryo XPS (1)
- Cryptoendolithism (1)
- Crystalline phase identification (1)
- Crystallization (1)
- CuNPs (1)
- Cubical shape (1)
- Cupriavidus campinensis (1)
- Cuticular hydrocarbons (1)
- Cyanobacteria (1)
- DIN (1)
- DIN EN 16516 (1)
- DNA polymerase (1)
- DSM 5009 (1)
- Decomposition point (1)
- Degradable polymer (1)
- Dendrimer (1)
- Denitrification (1)
- Deponie (1)
- Deponierung (1)
- Deponieverordnung (1)
- Desert ecology (1)
- Developing building materials (1)
- Dielectric heating (1)
- Dietary adaptation (1)
- Differential expression (1)
- Diffractive gratings (1)
- Diffusive Gradients in Thin-films (DGT) (1)
- Diffusive Gradients in thin films (DGT) (1)
- Diffusive gradients in thin-films (DGT) (1)
- Direct laser writing (1)
- Direct material input (1)
- Disinfection Fuel (1)
- Disposal (1)
- Diversity (1)
- Diversität (1)
- Domestikation (1)
- Dothideomycetes (1)
- Draft Genome (1)
- Drawings (1)
- Driving rain (1)
- Dry treatment (1)
- Drywood termite (1)
- DsRNA (1)
- Dye (1)
- Dyes and pigments (1)
- Dynamic calibration gas mixtures (1)
- Dynamic surface leaching test (1)
- Düngemittel (1)
- E. coli (1)
- EAF slags (1)
- EN 717-3 (1)
- Earthen building materials (1)
- Ecotoxicity tests (1)
- Ecotoxicological tests (1)
- Ecotoxixity (1)
- Efficacy (1)
- Egypt (1)
- Electric arc furnace (EAF) slags (1)
- Electric arc furnace slags (1)
- Electronic (1)
- Electronic Lab Notebook (ELN) (1)
- Electronic lab notebook (ELN) (1)
- Elektrolichtbogenofen (1)
- Elektronisches Laborbuch (1)
- Element mass concentration (1)
- Elemental aerosol analysis (1)
- Elemental composition (1)
- Elimination (1)
- Eluates (1)
- Eluatwerte (1)
- Elutionsverfahren (1)
- Emission chamber (1)
- Emission test method (1)
- Emission testing (1)
- Emissionen (1)
- Emissionsprüfung (1)
- Enamels (1)
- Entomopathogenic Fungus (1)
- Entropy (1)
- Entwicklung (1)
- Environmental Chemistry (1)
- Environmental Engineering (1)
- Environmental analysis (1)
- Environmental assessment (1)
- Environmental conditions (1)
- Environmental evaluation (1)
- Environmental impact (1)
- Environmental simulations (1)
- Epidemal layer (1)
- Erfurt (1)
- Eurotiomycetes (1)
- Exergie (1)
- Exocrine gland (1)
- Expansion (1)
- Exposure (1)
- External (1)
- Extracellular enzymes (1)
- Extracellular pH (1)
- Extractable organic fluorine (1)
- Extraction (1)
- Extraktion (1)
- Extremophile (1)
- Extremophiles (1)
- F pili (1)
- FAT class concept (1)
- FFF-3D printer (1)
- FFF-3D printing (1)
- FFF-filament (1)
- FFF-printing (1)
- FT-Raman (1)
- FactSage calculations (1)
- FactSageTM calculations (1)
- Family archives (1)
- Faraday cup aerosol electrometer (1)
- Fassaden (1)
- Fatigue (1)
- Fenton-like reaction (1)
- Fire-retardant paint (1)
- Flask method (1)
- Flexible shadow masks (1)
- Flow system (1)
- Fluorescence (1)
- Fluorescence spectroscopy (1)
- Fluorescent microscopy (1)
- Fluoride nanoparticles (1)
- Fluorides (1)
- Fluorolytic sol-gel synthesis (1)
- Fluorolytic sol−gel (1)
- Flügel (1)
- Food (1)
- Food fermentation (1)
- Forest fires (1)
- Forest soils (1)
- Formaldehyd (1)
- Formaldehyde (1)
- Formation enthalpy (1)
- Forschungsdatenmanagement (1)
- Freisetzung (1)
- Fuel sorption (1)
- Functionalized graphene (1)
- Fungal decay (1)
- Fungal stress mechanisms and responses (1)
- Fungicidal property (1)
- Fungiculture (1)
- Fusarium (1)
- Fällmittel (1)
- GC-FID (1)
- GC-MS (1)
- GDL (1)
- GNBP-2 (1)
- Gas analysis (1)
- Gene expression (1)
- General Chemistry (1)
- General Environmental Science (1)
- General Materials Science (1)
- General Medicine (1)
- Genetics (1)
- Genetik (1)
- Genome (1)
- Genome sequence (1)
- Genomics (1)
- Geology (1)
- Geomembranes (1)
- Giulio Romano (1)
- Global radiation (1)
- Granulat (1)
- Graphene (1)
- Graphene–bacteria interaction (1)
- Green facades (1)
- Groundwater (1)
- Grouts (1)
- Growth-rate homeostasis (1)
- Gut symbionts (1)
- Gypsum (1)
- Gypsum plasterboards (1)
- Gypsum waste (1)
- Halogenation (1)
- Halophilic bacteria (1)
- Hausbockkäfer (1)
- Hazardous waste (1)
- Haze Samples (1)
- Hazenite (1)
- Health, Toxicology and Mutagenesis (1)
- Healthcare (1)
- Heat capacity (1)
- Heat maps (1)
- Heavy metal free (1)
- Heavy metal removal (1)
- Heavy metals (1)
- Hebrew studies (1)
- Hellenistic (1)
- Herbaspirillum seropedicae (1)
- Herculaneum papyri (1)
- Hermopolis (1)
- Hi-Tension (1)
- High density polyethylene (1)
- History of Art (1)
- Holy Family (1)
- Holzschutzmittel (1)
- Holzwurm (1)
- Honey bee (1)
- Honeybee (1)
- Hospital premises (1)
- Host and symbiont ecology (1)
- Host immunity (1)
- Hydration products (1)
- Hydrogen permeation (1)
- Hydrogen storage (1)
- Hydrogenasen (1)
- Hydrophobic interaction (1)
- Hygienic behavior (1)
- Hylotrupes bajulus, Anobium punctatum, natural durability, tropical wood, native wood. (1)
- Hyperarid (1)
- Hypermutation (1)
- Hypopharynx (1)
- ICP-OES (1)
- IR spectroscopy (1)
- ISO (1)
- ISO 22196 (1)
- ISO REMCO (1)
- ITS region (1)
- Idiopathic environmental intolerance (1)
- In situ (1)
- In situ synchrotron x-ray diffraction (1)
- In-situ Process Monitoring (1)
- In-situ analysis (1)
- Incubated soil/fertilizer mixtures (1)
- Indirect photolysis (1)
- Indoor Air: Adsorbent performance (1)
- Indoor air (1)
- Indoor mycobiome (1)
- Industrial and Manufacturing Engineering (1)
- Industrial mycology (1)
- Infecting a number of insects, (1)
- Infections (1)
- Infrared spectroscopy (1)
- Infrared thermography (1)
- Ink analyses (1)
- Ink corrosion (1)
- Innenraumluft (1)
- Insect evolution (1)
- Insecticide (1)
- Instrumental analysis of ink (1)
- Instrumentation (1)
- Inter-comparison (1)
- Inter-lab comparison (1)
- Inter-laboratory test (1)
- Intercomparison (1)
- Interdisciplinarity (1)
- Intraparticle diffusion (1)
- Intumescent coating (1)
- Ionic liquid (1)
- Ir DNA staining approach (1)
- Iron gall ink (1)
- Iron making (1)
- Iron oxide (1)
- Iron scrap (1)
- Isotopes (1)
- Issues (1)
- Jig (1)
- Joint grouts (1)
- Kläranlage (1)
- Klärschlammasche (1)
- Knock-out mutant (1)
- Korynetes caeruleus (1)
- Kunststoffdichtungsbahnen (1)
- Kupfer (1)
- Laboratory breeding (1)
- Labrum (1)
- Laccase (1)
- Landfill (1)
- Landfill lining (1)
- Laser printer emission (1)
- Laser-induced nanostructures (1)
- Laser-modified surface (1)
- Layer-by-Layer (1)
- Leaching of waste materials (1)
- Lead (1)
- Leather (1)
- Lichtbogenofen (1)
- Life history data (1)
- Lifetime (1)
- Lignocellulose (1)
- Limit values (1)
- Low alloy steel (1)
- Low melting glasses (1)
- Low-molecular-weight organic substances (1)
- Luftgüte (1)
- MSWI bottom ash (1)
- MSWI fly ash (1)
- Major transition (1)
- Mantelverordnung (1)
- Manuscript (1)
- Manuscript studies (1)
- Map production and publishing (1)
- Maps and colours (1)
- Marble (1)
- Marek's Disease Virus (1)
- Marek's virus (1)
- Mask fabrication (1)
- Mass spectrometry (1)
- Materials Chemistry (1)
- Mathematical analysis (1)
- Mechanische Stabilität (1)
- Mechanisms of pathogenesis (1)
- Mechanosensitive channel (1)
- Medical mycology (1)
- Melanin (1)
- Melanin Adhesion (1)
- Melting point (1)
- Melting temperature (1)
- Metabolic engineering (1)
- Metabolic flux analysis (1)
- Metabolic modeling (1)
- Metabolism (1)
- Metadata (1)
- Metal recovery (1)
- Metals and Alloys (1)
- Metarhizium (1)
- Metarhizium robertsii DSM 1490 (1)
- Methane (1)
- Methanogen (1)
- Methanogene (1)
- Methanogens (1)
- Methods of scientific analysis (1)
- Microbe (1)
- Microbial abundance (1)
- Microbial adhesions (1)
- Microbial simulation, (1)
- Microbially Induced Corrosion (1)
- Microbially induced carbonate precipitation (MICP) (1)
- Microbiological influenced corrosion MIC (1)
- Microchamber (1)
- Micromonospora aurantiaca (1)
- Microorganisms (1)
- Microplastics (1)
- Microwaves (1)
- Middle Ages (1)
- Millipedes (1)
- Mineral (1)
- Mining (1)
- Mixed Inks (1)
- Mixture toxicity (1)
- Model (1)
- Model aerosols (1)
- Modeling (1)
- Modelling studies (1)
- Modified mycotoxins (1)
- Moisture (1)
- Moisture performance (1)
- Molecular Organic Frameworks (1)
- Molecular clock (1)
- Molecular identification (1)
- Molybdenum (1)
- Monoterpene (1)
- Monoverbrennung (1)
- MscS (1)
- Mud volcanoe fluids (1)
- Multi-resistant bacteria (1)
- Multi-scale study (1)
- Multicellularity (1)
- Multidisciplinary (1)
- Multilocus phylogeny (1)
- Multiple Displacement Amplification (1)
- Multiple chemical sensitivity (1)
- Multiple lines of evidence (1)
- Multiport (1)
- Municipal sewage sludge (1)
- Museum (1)
- Museumsschädling (1)
- Mussel-inspired coating (1)
- Mussel-inspired materials (1)
- Mutation rate (1)
- MySpot (1)
- Mycotoxin (1)
- Müllverbrennung (1)
- N and K analog tracer (1)
- NGS (1)
- NIR imaging (1)
- Nachsorge (1)
- Nano (1)
- Nano CRM (1)
- Nano Particles (1)
- Nano-Fourier-transform infrared spectroscopy (1)
- Nano-materials (1)
- NanoPlattform (1)
- Nanomaterial (1)
- Nanomaterials (1)
- Nanoparticle (1)
- Nanopowder (1)
- Nanosensor (1)
- Natural abundance of 15N (1)
- Natural durability (1)
- Natural ecosystems (1)
- Natural products discovery (1)
- Near ambient x-ray photoelectron spectroscopy (1)
- Near-infrared refectography (1)
- Near-infrared refelctography (1)
- Neozoon (1)
- Neuropeptide (1)
- New exocrine organ (1)
- Next generation sequencing (1)
- Nickel (1)
- Nitrification inhibitor (1)
- Nitrogen (1)
- Nitrogen fixation (1)
- Nitrogen uptake (1)
- Nitrososphaerales (1)
- Nitrous oxide (1)
- Non-destructive Materials (1)
- Non-ferrous metals (1)
- Non-invasive (1)
- Non-invasive scientific methods (1)
- Non-vitriolic iron-gall inks (1)
- Nonspecific binding (NSB) (1)
- Nonvolatile (1)
- Normung (1)
- Nostoc punctiforme (1)
- Novelle BBodSchV (1)
- Nutrient (1)
- Nutrient acquisition (1)
- Nutrient cycles (1)
- Nutrient uplift and recyclin (1)
- Nährstoffe (1)
- OECD (1)
- OIT (1)
- Oddy test (1)
- Oil (1)
- Olivine (1)
- One-step ionic liquids synthesis (1)
- Open data (1)
- OpenBIS (1)
- Optical properties of ink (1)
- Optical and Magnetic Materials (1)
- Organic contaminants (1)
- Organic phosphorus breakdown (1)
- Osmotic shock (1)
- Osteogenesis (1)
- Oxide melts (1)
- Oxyfuel-Verbrennung (1)
- P sink method (1)
- P speciation (1)
- P-Recyclingdünger (1)
- P-efficiency (1)
- P. Fluorescens (1)
- PAK (1)
- PM monitors (1)
- PV modules (1)
- Painting (1)
- Paper sizings (1)
- Particle emission (1)
- Particle size distribution (1)
- Particle synthesis (1)
- Partikel (1)
- Parylene C (1)
- Pathogen spillover (1)
- Pathogen transmission (1)
- Pathogen virulence (1)
- Pentimenti (1)
- Peptide-derived components (1)
- Per- and Polyfluoroalkyl substances (PFAS) (1)
- Per- and polyfluorinated alkly substances (PFASs) (1)
- Per- and polyfluorinated alkyl substances (PFASs) (1)
- Performance (1)
- Permeability (1)
- Permeat (1)
- Perowskit (1)
- Persian historical recipes (1)
- Persistence (1)
- Pest control (1)
- Pesticides (1)
- Pflanzenverfügbarkeit (1)
- Pflanzenwurzel (1)
- Phase formation (1)
- Phase transformation (1)
- Phenotypic heterogeneity (1)
- Phenotypic variation (1)
- Phoshpor availability (1)
- Phosphate dynamics (1)
- Phosphate extractability and availability (1)
- Phosphates (1)
- Phosphor-Rückgewinnung (1)
- Phosphorous recovery (1)
- Phosphorrückgewinnung (1)
- Phosphorus K-edge-XANES spectroscopy (1)
- Phosphorus availability (1)
- Phosphorus elimination (1)
- Phosphorus plant-availability (1)
- Phosphous recovery (1)
- Photocatalytic surfaces (1)
- Photodynamic therapy (1)
- Photometric P determination (1)
- Photonics (1)
- Phototrophs (1)
- Phyllosphere (1)
- Physical and optical characteristics (1)
- Pilot comparison (1)
- Pilze (1)
- Plant Experiment (1)
- Plant availability (1)
- Plant economic spectrum (1)
- Plant pathogen (1)
- Plastic degradation (1)
- Plastic waste (1)
- Platinum (1)
- Pollutant (1)
- Pollution (1)
- Polydopamine (1)
- Polyelektrolyt (1)
- Polyethylene terephthalate (1)
- Polyioinic liquid (1)
- Polymer-based products (1)
- Polymerase mutant (1)
- Polypropylene (1)
- Polystyrene (1)
- Polyurethanes (1)
- Porosity (1)
- Portrayal of St Joseph (1)
- Pot experiments (1)
- Potential toxic elements (1)
- Probiotic-based vaccines (1)
- Probiotics (1)
- Process Metallurgy (1)
- Process development (1)
- Process upscaling (1)
- Proficiency testing (1)
- Proofreading deficient (1)
- Prospective risk assessment (1)
- Proteome (1)
- Proton conductivity (1)
- Pseudomonas fluorescens (1)
- Pseudomonas veronii (1)
- Ptinidae (1)
- Public Health, Environmental and Occupational Health (1)
- Purification (1)
- Pyrolyse (1)
- Pyrolysis (1)
- Pyrometallurgie (1)
- Quasispecies (1)
- RNA interference (1)
- RNA-Seq (1)
- RNA-Sequencing (1)
- RNAi (1)
- Radio waves (1)
- Radiocarbon (1)
- Radon (1)
- Radon exhalation (1)
- Raman Spectroscopy (1)
- Raphael school (1)
- Reactive oxygen species (1)
- Reactor conditions (1)
- Real-time qPCR (1)
- Recipes (1)
- Recovery potential (1)
- Recovery rate (1)
- Recycled gypsum (1)
- Recycled sources (1)
- Recyclingdüngemittel (1)
- Red Mud (1)
- Red mud (1)
- Redensarten (1)
- Reductive decomposition (1)
- Reductive defluorination (1)
- Reduktionsprozess (1)
- Reference materials (1)
- Reference method (1)
- Reference nanoparticles (1)
- Reference organisms (1)
- Reference samples (1)
- Regulation (1)
- Relative agronomische Effizienz (RAE) (1)
- Religion (1)
- Rembrandt (1)
- Remediation (1)
- Research Data Infrastructure (1)
- Research Data Management (1)
- Research data management (1)
- Resistance model (1)
- Resource Recovery (1)
- Resources (1)
- Retentat (1)
- Reverse paintings on glass (1)
- Reworking (1)
- Rhenanite (1)
- Rhizopus (1)
- Rhizopus and Aspergillus oryzae (1)
- Rhizosphere (1)
- Rhizosphere effect (1)
- Rhizosphere processes (1)
- Rhodonia placenta (1)
- Rice (1)
- Road construction waste (1)
- Robustness validation (1)
- Rock biofilm (1)
- Root economics space (1)
- Rostral gland (1)
- Round robin test (1)
- Rround robin test (1)
- Ruthenium (1)
- SAXS (1)
- SEM (1)
- SEM micrography (1)
- SEM wood characterization (1)
- SIMS (1)
- SVOC (1)
- Safety (1)
- Salts (1)
- Sample preparation (1)
- Sapphire (1)
- Sc recovery (1)
- Sc-ICP-ToF-MS (1)
- Scanning micro-X-ray fluorescence (1)
- Scattering (1)
- Scattering-type scanning near-field optical microscopy (s-SNOM) (1)
- Schmetterlinge (1)
- Scribal corrections (1)
- Secondary P-fertilizer (1)
- Secondary metabolites (1)
- Secondary raw materials (1)
- Selective Chlorination (1)
- Selective chlorination (1)
- Selective quantification (1)
- Self-assembled monolayer (1)
- Self-assembled monolayers (SAM) (1)
- Semivolatile organic compounds (1)
- Sensors (1)
- Sequence annotation (1)
- Sequential extraction (1)
- Sets of archaeometric data (1)
- Setzmaschine (1)
- Sewage Sludge (1)
- Sewage Sludge Ashes (1)
- Sewage sludge ash (SSA) (1)
- Sewage sludge disposal (1)
- Short crack propagation (1)
- Silica and polystyrene nanoparticles (1)
- Silicate (1)
- Silicon carbide (1)
- Silver (1)
- Single cell (1)
- Single cell microbiology (1)
- Sixteenth-century painting technique (1)
- Size (1)
- Size exclusion chromatography (1)
- Size resolved chemical composition (1)
- Social Immunity (1)
- Social immunity (1)
- Social insect (1)
- Social insects (1)
- Sociality (1)
- Software (1)
- Soil contact (1)
- Soil incubation study (1)
- Soil-feeding habit (1)
- Soil-like material (1)
- Soils (1)
- Solar panels (1)
- Soldier (1)
- Solid phase extraction (SPE) (1)
- Solid-liquid extraction (1)
- Solid-phase extraction (SPE) (1)
- Solitary bees (1)
- Solute excretion (1)
- Solvents (1)
- Solvolyse (1)
- Solvolysis (1)
- Sorption (1)
- Spectral imaging (1)
- Spectroscopy (1)
- Sprache (1)
- Standardization (1)
- Standsicherheit (1)
- Steelmaking residues (1)
- Stoichiometric homeostasis (1)
- Stone cultural heritage (1)
- Stop/flow experiments model (1)
- Strategy and Management (1)
- Stress conditions (1)
- Sub-4nm particles (1)
- Subjective complaints (1)
- Subsocial (1)
- Subsoil nutrient tracing (1)
- Sugar cane bagasse (1)
- Sum parameter (1)
- Sum parameter analysis (1)
- Suppression (1)
- Surface interactions (1)
- Surface water (1)
- Surface waters (1)
- Survival rates (1)
- Synchrotron (1)
- Synchrotron radiation (1)
- Synergy (1)
- Synthesis (1)
- Synthetic metabolism (1)
- Synthetic organic pigments (1)
- Systematics (1)
- Tannins (1)
- Targeted and nontargeted (1)
- Targeting, Nanoparticles (1)
- Taxonomy (1)
- Temperate rain forest (1)
- Temperature and humidity (1)
- Temple Scroll (1)
- Tems (1)
- Terbutryn (1)
- Termite-associated microbes (1)
- Termiten (1)
- Termitoidae (1)
- Textilschädling (1)
- Thermal analysis (1)
- Thermal degradation (1)
- Thermo-desorption (1)
- Thermocouple (1)
- Thermodynamic (1)
- Thioimidazolium (1)
- Time resolved chemical composition (1)
- Torah (1)
- Torah scrolls (1)
- Touch surfaces (1)
- Transition metals (1)
- Tripartite interactions (1)
- UV radiation (1)
- UV-irradiation (1)
- Ultrastructure (1)
- Umwelt (1)
- Umweltmessung (1)
- Umweltsimulation (1)
- Umweltverträglichkeit (1)
- Up-cycling (1)
- UpConversion (1)
- Urban mining (1)
- Ureolytic bacteria (1)
- Utilisation (1)
- VOC emission (1)
- VOC-Emission (1)
- VOC-emission (1)
- Validation trial (1)
- Vanadium (1)
- Vasari (1)
- Vegetationsversuche (1)
- Vererbung (1)
- Vergleichende Linguistik (1)
- Verwertung (1)
- Viruses (1)
- Vitrine (1)
- Vitriolic iron-gall inks (1)
- Vorsorgewerte (1)
- Waste (1)
- Waste incineration (1)
- Waste management (1)
- Waste water (1)
- Water (1)
- Water analysis (1)
- Water atmosphere (1)
- Water contact (1)
- Water stable isotope analysis (1)
- Water uptake (1)
- Weld fatigue (1)
- Weld toe geometry (1)
- Wet-mechanical treatment (1)
- White-rot fungi (1)
- Wood Modification (1)
- Wood ash (1)
- Wood samples (1)
- Wooden toys (1)
- Writing materials (1)
- X-Ray analysis (1)
- X-Ray flourescence spectroscopy (1)
- X-ray adsorption near-edge structure (XANES) spectroscopy (1)
- X-ray diffraction (XRD) (1)
- X-ray fuorescence (1)
- X-ray spectroscopy (1)
- X-ray tomographic (1)
- XRF imaging (1)
- XRF ink analysis (1)
- Yeast (1)
- ZIF (1)
- ZIF-8 (1)
- Zearalenone (1)
- Zearalenone sulfate (1)
- Zentrat (1)
- Zeolithe (1)
- Zinc chloride (1)
- Zinc oxide (1)
- Zinnschlacke (1)
- a-zearalenol (1)
- dsDAN monolayer (1)
- fertilizer (1)
- iChip (1)
- microspectroscopy (1)
- openBIS (1)
- pH (1)
- pH probe (1)
- pHe (1)
- qPCR (1)
- soil (1)
- underexplored phyla (1)
- x-ray diffraction (1)
- ‘Green’ pesticide (1)
Organisationseinheit der BAM
- 4 Material und Umwelt (341)
- 4.1 Biologische Materialschädigung und Referenzorganismen (93)
- 4.3 Schadstofftransfer und Umwelttechnologien (74)
- 4.4 Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung (56)
- 4.0 Abteilungsleitung und andere (54)
- 4.2 Material-Mikrobiom Wechselwirkungen (44)
- 4.5 Kunst- und Kulturgutanalyse (38)
- 1 Analytische Chemie; Referenzmaterialien (33)
- 6 Materialchemie (31)
- 1.7 Organische Spuren- und Lebensmittelanalytik (12)
Paper des Monats
- ja (19)
Metagenomic datasets of air samples collected during episodes of severe smoke-haze in Malaysia
(2021)
Transboundary emissions of smoke-haze from land and forest fires have recurred annually during the dry period (June to October, over the past few decades) in South East Asia. Hazardous air quality has been recorded in Malaysia during these episodes. Agricultural practices such as slash-and-burn of biomass and peat fires particularly in Sumatera and Kalimantan, Indonesia, have been implicated as the major causes of the haze. Past findings have shown that a diversity of microbes can thrive in air including in smoke-haze polluted air. In this study, metagenomic data were generated to reveal the diversity of microorganisms in air during days with and without haze. Air samples were collected during non-haze (2013A01) and two haze (2013A04 and 2013A05) periods in the month of June 2013. DNA was extracted from the samples, subjected to Multiple Displacement Amplification and whole genome sequencing (Next Generation Sequencing) using the HiSeq 2000 Platform. Extensive bio-informatic analyses of the raw sequence data then followed. Raw reads from these six air samples were deposited in the NCBI SRA databases under Bioproject PRJNA662021 with accession numbers SRX9087478, SRX9087479 and SRX9087480.
This study details a theoretical analysis of leaky and waveguide modes in biperiodic all-dielectric holograms. By tuning diffraction orders and subsequently confining local density of optical states at two distinct resonance wavelengths, we present a new class of highly sensitive refractive index biosensing platforms that are capable of resolving 35.5 to 41.3 nm/RIU of spectral shift for two separate biological analytes.
Bacteria generally interact with the environment via processes involving their cell-envelope. Thus, techniques that may shed light on their surface chemistry are attractive tools for providing an understanding of bacterial interactions. One of these tools is Al Kα-excited photoelectron spectroscopy (XPS) with its estimated information depth of <10 nm. XPS-analyses of bacteria have been performed for several decades on freeze-dried specimens in order to be compatible with the vacuum in the analysis chamber of the spectrometer. A limitation of these studies has been that the freeze-drying method may collapse cell structure as well as introduce surface contaminants. However, recent developments in XPS allow for analysis of biological samples at near ambient pressure (NAP-XPS) or as frozen hydrated specimens (cryo-XPS) in vacuum. In this work, we have analyzed bacterial samples from a reference strain of the Gram-negative bacterium Pseudomonas fluorescens using both techniques. We compare the results obtained and, in general, observe good agreement between the two techniques. Furthermore, we discuss advantages and disadvantages with the two analysis approaches and the output data they provide. XPS reference data from the bacterial strain are provided, and we propose that planktonic cells of this strain (DSM 50090) are used as a reference material for surface chemical analysis of bacterial systems.
Stormwater from urban areas can transport biocidally active substances and related transformation products from buildings into the environment. The occurrence of these substances in urban runoff depends on the availability of water, and on ultraviolet radiation exposure that causes photolytic reactions. In a systematic laboratory study, painted test specimens were exposed to either ultraviolet radiation, water contact, or a combination of both. Leaching of the biocidally active substances carbendazim, diuron, octylisothiazolinone, terbutryn, and selected transformation products of terbutryn and diuron were observed under various exposure conditions. Remaining concentrations of these substances in the paint were quantified. It was demonstrated that the distribution of active substances and transformation products in eluates and in the coatings themselves differs with exposure conditions. Strategies for environmental monitoring of biocide emissions need to consider the most relevant transformation products. However, environmental concentrations of biocidally active substances and transformation products depend on earlier exposure conditions. As a consequence, monitoring data cannot describe emission processes and predict expected leaching of biocidally active substances from buildings if the data are collected only occasionally.
Lack of long-time stability of dsDNA-based supramolecular assemblies is an important issue that hinders their applications. In this work, 20 base pairs long dsDNA fragments [(dCdG)20
65%] composed of 65% dCdG and 35% dAdT nucleotides were tethered via a thiol to the surface of a gold electrode. The selfassembled (dCdG)20
-65% monolayer was immersed in solutions
containing ectoine, a compatible solute. Electrochemical results showed that these monolayers were stable for one month. In situ IR spectroscopy indicated that ectoine interacts weakly with the phosphate-ribose backbone, dehydrating the phosphate groups and stabilizing the A-DNA conformation. This structural reorganization led to a reorientation of nucleic acid base pairs and a local disruption of the double-helix structure. However, the conformation and orientation of the dsDNA fragment was stable in the
One of the typical wastes produced in blast-furnace (BF) ironmaking is BF sludge, which mostly consists of carbon and iron oxides, but also contains toxic trace metals such as Zn, Pb, Cd, As, and Hg that render the material hazardous. Due to the lack of an established recycling process, BF sludges are landfilled, which is ecologically questionable and costly. Here, we investigate selective removal of Zn, Pb, and Cd from BF sludge by chlorination–evaporation reactions using thermodynamic modelling and laboratory-scale experiments. Specifically, BF sludge was thermochemically treated at 650–1000 °C with a spent iron(II) chloride solution from steel pickling and the effects of process temperature and retention time on removal of Zn, Pb, and Cd were investigated. Zinc and Pb were quantitatively removed from BF sludge thermochemically treated at 900–1000 °C, whereas Fe and C as well as other major elements were mostly retained. The Zn, Pb, and Cd contents in the thermochemically treated BF sludge could be lowered from ∼56 g/kg, ∼4 g/kg, and ∼0.02 g/kg to ≤0.7 g/kg, ≤0.02 g/kg, and ≤0.008 g/kg, respectively, thus rendering the processed mineral residue a non-hazardous raw material that may be re-utilized in the blast furnace or on the sinter band.
Many microorganisms including free-living and symbiotic fungi weather minerals through the formation of biofilms on their surface. Weathering thus proceeds not only according to the mineral’s chemistry and the environmental conditions but also according to the local biofilm chemistry. These processes can be dissected in experiments with defined environmental settings and by employing genetic tools to modify traits of the fungal biofilm. Biofilms of the rock-inhabiting fungus Knufia petricola strain A95 (wild-type, WT) and its melanin-deficient mutant (ΔKppks) were grown on polished olivine sections in subaerial (air-exposed) and subaquatic (submerged) conditions. After seven months of interaction at pH 6 and 25°C, the fungus-mineral interface and abiotic olivine surface were compared using high resolution transmission electron microscopy (HRTEM). The abiotic, subaquatic olivine section showed a 25 nm thick, continuous amorphous layer, enriched in Fe and depleted in Si compared to the underlying crystalline olivine. This amorphous layer formed either through a coupled interfacial dissolution reprecipitation mechanism or through the adsorption of silicic acid on precipitated ferric hydroxides. Its thickness was likely enhanced by mechanical stresses of polishing. Directly underneath a fungal biofilm (WT and mutant alike), the surface remained mostly crystalline and was strongly etched and weathered, indicating enhanced olivine dissolution. The correlation between enhanced olivine dissolution and the absence of a continuous amorphous layer is a strong indication of the dissolution-inhibiting qualities of the latter. We propose that the fungal biofilm sequesters significant amounts of Fe, preventing formation of the amorphous layer and driving olivine dissolution onwards. The seemingly similar olivine surface underneath both WT and mutant biofilms illustrates the comparably insignificant role of specific biofilm traits in the weathering of olivine once biofilm attachment is imposed. Under subaerial conditions, the absence of water on the abiotic surface prohibited olivine dissolution. This was overcome by the water retention capacities of both the WT and mutant biofilm: the olivine surface underneath subaerial fungal biofilms was as weathered as the corresponding subaquatic olivine surface. Under the studied environmental settings, the effect of fungal biofilms on olivine weathering seems to be universal, independent of the production of melanin, the composition of extracellular polymeric substances (EPS) or air-exposure.
The ISO 16000-6 standard describes a method for the determination of volatile organic compounds (VOCs) in indoor and test chamber air by sorbent-based active sampling, thermal desorption and gas chromatography coupled with mass spectrometry (GC/MS). It also gives directions to adapt this methodology to very volatile organic compounds (VVOCs). Indeed, toxicologically based guideline values are being implemented for these compounds and it becomes necessary to measure them. But a comprehensive and robust measurement method is lacking. This work highlights the points that still need to be explored towards the standardisation of a suitable procedure: investigations on sorbent combinations, the suitability of chromatography columns and the use of gaseous standards are required. The biggest challenge remains in the fact that strong sorbents adsorb water together with VVOCs. Water may impair the analysis and the optimal approach to eliminate it is still to be found and integrated into the sampling strategy.
In the transition from carbon to iron-gall inks, the two documents from the Egyptian Museum and Papyrus Collection in Berlin with shelfmarks P 13500 and P 13501 discussed in this work present an important case. Their inks appear brownish, although they date back to the fourth and third century BCE, when carbon inks are believed to have been commonly if not exclusively used. Using imaging micro-X-ray fluorescence and infrared reflectography, we discovered that the inks in both documents contain a significant amount of copper in addition to carbon. Comparing the extant recipes for black writing inks and the experimental evidence, we suggest that these inks are a transition between the pure carbon and the iron-gall inks. Such inks may have been quite common before the production of iron-gall ink was clearly understood and established.
Natural building materials for interior fitting and refurbishment - What about indoor emissions?
(2021)
Indoor air quality can be adversely affected by emissions from building materials, consequently having a negative impact on human health and well-being. In this study, more than 30 natural building materials (earth dry boards and plasters, bio-based insulation materials, and boards made of wood, flax, reed, straw, etc.) used for interior works were investigated as to their emissions of (semi-) volatile organic compounds ((S)VOC), formaldehyde, and radon. The study focused on the emissions from complete wall build-ups as they can be used for internal Partition walls and the internal insulation of external walls. Test chambers were designed, allowing the compounds to release only from the surface of the material facing indoors under testing Parameters that were chosen to simulate model room conditions. The emission test results were evaluated using the AgBB evaluation scheme, a procedure for the health-related evaluation of construction products and currently applied for the approval of specific groups of building materials in Germany.
Seventeen out of 19 sample build-ups tested in this study would have passed this scheme since they generally proved to be low-emitting and although the combined emissions of multiple materials were tested, 50% of the measurements could be terminated before half of the total testing time.
Formaldehyde is considered as carcinogenic and is emitted from particleboards and plywood used in toy manufacturing. Currently, the flask method is frequently used in Europe for market surveillance purposes to assess formaldehyde release from toys, but its concordance to Levels measured in emission test chambers is poor. Surveillance laboratories are unable to afford laborious and expensive emission chamber testing to comply with a new amendment of the European Toy Directive; they need an alternative method that can provide reliable results. Therefore, the application of miniaturised emission test chambers was tested. Comparisons between a 1 m3 emission test chamber and 44 mL microchambers with two particleboards over 28 days and between a 24 L desiccator chamber and the microchambers with three puzzle samples over 10 days resulted in a correlation coefficient r2 of 0.834 for formaldehyde at steady state. The correlation between the results obtained in microchambers vs. flask showed a high variability over 10 samples (r2: 0.145),
thereby demonstrating the error-proneness of the flask method in comparison to methods carried out under ambient parameters. An exposure assessment was also performed for three toy puzzles: indoor formaldehyde concentrations caused by puzzles were not negligible (up to 8 µg/m3), especially when more conservative exposure scenarios were considered.
Emission testing of volatile organic compounds (VOC) from materials and products is commonly based on emission test chamber measurements. To ensure the comparability of results from different testing laboratories, their measurement performance must be verified. For this purpose, Bundesanstalt für Materialforschung und -prüfung (BAM) organizes an international proficiency test (round robin test, RRT) every two years using well-characterized test materials (one sealant, one furniture board, and four times a lacquer) with defined VOC emissions. The materials fulfilled the requirements of homogeneity, reproducibility, and stability. Altogether, 36 VOCs were included of which 33 gave test chamber air concentrations between 13 and 83 µg/m3. This is the typical concentration range to be expected and to be quantified when performing chamber tests. Three compounds had higher concentrations between 326 and 1105 µg/m3. In this paper, the relative standard deviations (RSD) of BAM round robin tests since 2008 are compared and the improvement of the comparability of the emission chamber testing is shown by the decrease of the mean RSD down to 28 % in 2018. In contrast, the first large European interlaboratory comparison in 1999 showed a mean RSD of 51 %.
Bauprodukte und Einrichtungsgegenstände für Innenräume, wie Bodenbeläge und Wandpaneele, sollen das Wohlbefinden und die Gesundheit der Raumnutzerinnen und -nutzer nicht durch das Ausdünsten von Geruchsstoffen stören. Mit der Geruchsprüfung nach ISO 16000-28 „Innenraumluft - Bestimmung der Geruchsstoffemissionen aus Bauprodukten mit einer Emissionsprüfkammer“ wird der Produktgeruch zu einer messbaren Größe. So kann z. B. die empfundene Intensität, also die Stärke eines Geruchseindruckes, mit Hilfe eines Vergleichsmaßstabes von Probandinnen und Probanden ermittelt werden. Im hier vorgestellten Projekt werden Vorschläge zur Weiterentwicklung der Methode vorgestellt, um im Ergebnis die Reproduzierbarkeit der Messergebnisse weiter zu verbessern. Dabei werden vor allem das Probenpräsentationssystem und die Bewertungsmethodik für die empfundene Intensität bei der Bewertung von Bauprodukten gemäß AgBB-Schema betrachtet, da diese einen wesentlichen Einfluss haben.
Materials that confer antimicrobial activity, be that by innate property, leaching of biocides or design features (e.g., non-adhesive materials) continue to gain popularity to combat the increasing and varied threats from microorganisms, e.g., replacing inert surfaces in hospitals with copper. To understand how efficacious these materials are at controlling microorganisms, data is usually collected via a standardised test method. However, standardised test methods vary, and often the characteristics and methodological choices can make it difficult to infer that any perceived antimicrobial activity demonstrated in the laboratory can be confidently assumed to an end-use setting. This review provides a critical analysis of standardised methodology used in academia and industry, and demonstrates how many key methodological choices (e.g., temperature, humidity/moisture, airflow, surface topography) may impact efficacy assessment, highlighting the need to carefully consider intended antimicrobial end-use of any product.
Antimicrobials can exert specific physiological effects when used in combination that are different from those when applied alone. While combination effects have been extensively mapped for antibiotic-antibiotic combinations, the combination effects of antibiotics with antimicrobials used as biocides or antiseptics have not been systematically investigated. Here, we investigated the effects of combinations of antibiotics (meropenem, gentamicin, and ciprofloxacin) and substances used as biocides or antiseptics [octenidine, benzalkonium chloride, cetrimonium bromide, chlorhexidine, Povidone-iodine, silver nitrate (AgNO3), and Ag-nanoparticles] on the planktonic growth rate of Pseudomonas aeruginosa. Combination effects were investigated in growth experiments in microtiter plates at different concentrations and the Bliss interaction scores were calculated. Among the 21 screened combinations, we find prevalent combination effects with synergy occurring six times and antagonism occurring 10 times. The effects are specific to the antibiotic-biocide combination with meropenem showing a tendency for antagonism with biocides (6 of 7), while gentamicin has a tendency for synergy (5 of 7). In conclusion, antibiotics and biocides or antiseptics exert physiological combination effects on the pathogen P. aeruginosa. These effects have consequences for the efficacy of both types of substances and potentially for the selection of antimicrobial resistant strains in clinical applications with combined exposure (e.g., wound care and coated biomaterials).
Quantitative chemical analysis of airborne particulate matter (PM) is vital for the understanding of health effects in indoor and outdoor environments, as well as for enforcing EU air quality regulations. Typically, airborne particles are sampled over long time periods on filters, followed by lab-based analysis, e.g., with inductively coupled plasma mass spectrometry (ICP-MS). During the EURAMET EMPIR AEROMET project, cascade impactor aerosol sampling is combined for the first time with on-site total reflection X-ray fluorescence (TXRF) spectroscopy to develop a tool for quantifying particle element compositions within short time intervals and even on-site. This makes variations of aerosol chemistry observable with time resolution only a few hours and with good size resolution in the PM10 range. The study investigates the proof of principles of this methodological approach. Acrylic discs and silicon wafers are shown to be suitable impactor carriers with sufficiently smooth and clean surfaces, and a non-destructive elemental mass concentration measurement with a lower limit of detection around 10 pg/m3 could be achieved. We demonstrate the traceability of field TXRF measurements to a radiometrically calibrated TXRF reference, and the results from both analytical methods correspond satisfactorily.
A new facility has been developed which allows for a stable and reproducible production of ambient-like model aerosols (PALMA) in the laboratory. The set-up consists of multiple aerosol generators, a custom-made flow tube homogeniser, isokinetic sampling probes, and a system to control aerosol temperature and humidity. Model aerosols containing elemental carbon, secondary organic matter from the ozonolysis of α-pinene, inorganic salts such as ammonium sulfate and ammonium nitrate, mineral dust particles,and water were generated under different environmental conditions and at different number and mass concentrations. The aerosol physical and chemical properties were characterised with an array of experimental methods, including scanning mobility particle sizing, ion chromatography, total reflection X-ray fluorescence spectroscopy and thermo-optical analysis. The facility is very versatile and can find applications in the calibration and performance characterisation of aerosol instruments monitoring ambient air. In this study, we performed, as proof of concept, an intercomparison of three different commercial PM (particulate matter) monitors (TEOM1405, DustTrak DRX 8533 and Fidas Frog) with the gravimetric reference method under three simulated environmental scenarios. The results are presented and compared to previous field studies. We believe that the laboratory-based method for simulating ambient aerosols presented here could provide in the future a useful alternative to time-consuming and expensive field campaigns, which are often required for instrument certification and calibration.
Condensation particle counters (CPCs) are widely used for the measurement of aerosol particle number concentrations in the size range from approximately 3 nm to 3 μm. For an SI-traceable calibration of the size-dependent counting efficiency, which is advisable on a regular basis and required in several applications, Faraday cup aerosol electrometers (FCAEs) are considered to be a suitable SI-traceable reference.While the volumetric aerosol inlet flowrate and the electrical current measurement in FCAEs can be related to respective SI references, inter-comparison exercises for FCAEs are still performed on a regular basis to establish reliable uncertainty budgets and to further investigate the influences of designs and operational parameters on comparability. This is strongly demanded in the international community of metrological institutes and aerosol calibration facilities around the world, which provide CPC calibrations. In the present study, the performance of FCAEs was investigated,using Ag test aerosol particles with a 30 nm particle diameter by varying the inlet flowrates from 0.5 l min−1 to 4 l min−1. From our experimental results, significant deviations were observed in FCAE currents at sample flowrates smaller than 1.5 l min−1. It is recommended that these discrepancies should be quantified before an FCAE is used for CPC calibration at low sample flowrates and small particle sizes in the sub-30 nm size range.
Mussel-inspired multifunctional coating for bacterial infection prevention and osteogenic induction
(2021)
Bacterial infection and osteogenic integration are the two main problems that cause severe complications after surgeries. In this study, the antibacterial and osteogenic properties were simultaneously introduced in biomaterials, where copper nanoparticles (CuNPs) were generated by in situ reductions of Cu ions into a mussel-inspired hyperbranched polyglycerol (MI-hPG) coating via a simple dip-coating method. This hyperbranched polyglycerol with 10 % catechol groups’ modification presents excellent antifouling property, which could effectively reduce bacteria adhesion on the surface. In this work, polycaprolactone (PCL) electrospun fiber membrane was selected as the substrate, which is commonly used in biomedical implants in bone regeneration and cardiovascular stents because of its good biocompatibility and easy post-modification. The as-fabricated CuNPs-incorporated PCL membrane [PCL-(MI-hPG)-CuNPs] was confirmed with effective antibacterial performance via in vitro antibacterial tests against Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), and multi-resistant E. coli. In addition, the in vitro results demonstrated that osteogenic property of PCL-(MI-hPG)-CuNPs was realized by upregulating the osteoblast-related gene expressions and protein activity. This study shows that antibacterial and osteogenic properties can be balanced in a surface coating by introducing CuNPs.