4 Material und Umwelt
Filtern
Erscheinungsjahr
- 2022 (166) (entfernen)
Dokumenttyp
Schlagworte
- Biocides (17)
- Antimicrobial resistance (11)
- Leaching (7)
- Klärschlamm (6)
- Wastewater (6)
- Biofilms (5)
- Disinfection (5)
- Phosphorrückgewinnung (5)
- Risk assessment (5)
- Sewage sludge (5)
- Antimicrobial coating (4)
- Archäometrie (4)
- Bacteria (4)
- Cascade impactor (4)
- Evolution (4)
- Horizontal gene transfer (4)
- Mutation rate (4)
- Nano (4)
- PFAS (4)
- Phosphorus recovery (4)
- Transformation (4)
- VOC (4)
- XANES spectroscopy (4)
- Affinity chromatography (3)
- Anerkennungen (3)
- Antibodies (3)
- Bauprodukte (3)
- Biocide tolerance (3)
- Carbon steel corrosion (3)
- Construction products (3)
- EN 16516 (3)
- ISO 16000-6 (3)
- Ir DNA staining approach (3)
- Laser-induced periodic surface structures (LIPSS) (3)
- Method development (3)
- Microbiological influenced corrosion MIC (3)
- Passive sampling (3)
- Per- and Polyfluoroalkyl substances (PFAS) (3)
- Persistence (3)
- Phosphor (3)
- Polyethylene (3)
- Polyglycerol (3)
- Recycling (3)
- Ringversuch (3)
- Rostasche (3)
- Sc-ICP-ToF-MS (3)
- Single cell (3)
- Standardization (3)
- Struvite (3)
- VVOCs (3)
- Zement (3)
- Zulassungen (3)
- Abdichtungssystem (2)
- Abfallverbrennung (2)
- Aerosol (2)
- Air quality monitoring (2)
- Analytical method (2)
- Antimicrobial surfaces (2)
- Bacterial adhesion tests (2)
- Bio-weathering (2)
- Biocide (2)
- Biozide (2)
- Cairo Genizah (2)
- Capsules (2)
- Combustion ion chromatography (2)
- DHN melanin (2)
- Deponie (2)
- Diffusive sampling (2)
- Düngemittel (2)
- Dünger (2)
- Fungi (2)
- Fungus (2)
- Genetics (2)
- Geosynthetics (2)
- Glutaraldehyde (2)
- Herculaneum (2)
- Heterogeneity (2)
- IAQ (2)
- ICP-MS (2)
- Ink analyses (2)
- Klärschlammverordnung (2)
- Light (2)
- MIC (2)
- Material emissions (2)
- Melanin (2)
- Microbiota (2)
- Microcolonial fungi (2)
- Middle Ages (2)
- Mikroplastik (2)
- Nanomaterial (2)
- Nanoparticle (2)
- OECD (2)
- Osmoadaptation (2)
- Perceived Intensity (2)
- Phosphorus (2)
- Purification (2)
- Reductive amination (2)
- Reference material (2)
- Reference materials (2)
- Reproduzierbarkeit (2)
- Resistance (2)
- Richtlinien (2)
- Round robin test (2)
- Sapphire (2)
- Schutzschichten (2)
- Sewage sludge ash (2)
- Soil (2)
- Stress (2)
- TXRF (2)
- Thermal extraction (2)
- Tolerance (2)
- UFP (2)
- Uptake rate (2)
- Wood protection (2)
- X-Ray fluorescence analyses (2)
- XRF (2)
- Zeichenmaterialien (2)
- Zerstörungsfreie Prüfung (2)
- (Semi)arid to humid-temperate natural ecosys (1)
- A key interface (1)
- AEROMET II (1)
- Adaption (1)
- Affinity extraction (1)
- Affinity support (1)
- Ag-LDI-MS (1)
- Ageing (1)
- Aluminum oxide (1)
- Amate (1)
- Amino acid analysis (1)
- Analytische Methode (1)
- Animal immune system (1)
- Antiadhesive surfaces (1)
- Antibiotic resisitance (1)
- Antibody purification (1)
- Antimikrobielle Resistenz (1)
- Antimony black (stibnite) (1)
- Antmikrobielle Oberflächen (1)
- Aquatische Toxizität (1)
- Aqueous synthesis (1)
- Aromatic amino acid analysis AAAA (1)
- Aromatic amino acid analysis aaaa (1)
- AshDec (1)
- Ashdec (1)
- Assessment (1)
- Atomic force microscopy (1)
- Autoclave tests (1)
- Autoklaventest (1)
- BEMMA (1)
- BOFS (1)
- BSA (1)
- Bacteria repellent surfaces (1)
- Bacteria-repellent surfaces (1)
- Basidiomycetes (1)
- Basin (1)
- Bauhaus Weimar (1)
- Bauxite residue (1)
- Behavioural mechanisms (1)
- Behördenklausurtagung (1)
- Bewertungsverfahren (1)
- Bioconjugation (1)
- Biodegradation (1)
- Biofilm growth (1)
- Biological pest control (1)
- Bioseparation (1)
- Biotic environment (1)
- Biozid (1)
- Black fungi (1)
- Blattodea (1)
- Bottom ash (1)
- Bovine serum albumin (1)
- Brown-rot fungi (1)
- Building Material (1)
- Building product (1)
- Bundesoberbehörden (1)
- CIC (1)
- CaNaPO4 (1)
- Carrier (1)
- Cast iron (1)
- Cell-envelope (1)
- Cellulose ether (1)
- Chamber test (1)
- Chemical ecology (1)
- Chemical recycling (1)
- Chilean Coastal Cordillera (1)
- Circular economy (1)
- Cloning vectors (1)
- Cobalt (1)
- Combustion Ion Chromatography (1)
- Combustion and gasification (1)
- Community-level interactions (1)
- Concept (1)
- Contamination (1)
- Controllable gene expression (1)
- Corrosion (1)
- Corundum (1)
- Cribellate spiders (1)
- Cross-resistance (1)
- Crystallization (1)
- Cubical shape (1)
- Cultural heritage (1)
- Cupriavidus campinensis (1)
- Cuticular hydrocarbons (1)
- DIN (1)
- DIN EN 350 (1)
- DNA polymerase (1)
- Dauerhaftigkeit (1)
- Degradation (1)
- Dendrimer (1)
- Desiccation (1)
- Design of experiments (1)
- Diffusive gradients in thin-films (DGT) (1)
- Digitalisierung (1)
- Disinfection Fuel (1)
- Domestikation (1)
- Downstream processing (1)
- Driving rain (1)
- Dry treatment (1)
- E. coli (1)
- EOF (1)
- ESEM (1)
- Ecotoxicity (1)
- Ecotoxixity (1)
- Ectoine (1)
- Effective uptake rate (1)
- Electron microscopy (1)
- Elektronisches Laborbuch (1)
- Elektroofenstaub (1)
- Element mass concentration (1)
- Elemental aerosol analysis (1)
- Emission (1)
- Emission reference materials (1)
- Emission test chamber (1)
- Emission test chamber procedure (1)
- Emission test method (1)
- Emissionen (1)
- Emissions (1)
- Environmental assessment (1)
- Environmental impact (1)
- Ersatzbaustoffe (1)
- Ersatzbaustoffverordnung (1)
- Essential oils (1)
- Experimental evolution (1)
- Exposure risk (1)
- Extractable organically bound fluorine (EOF) (1)
- Extremotolerance (1)
- FFF-3D-Printer (1)
- FFF-filament (1)
- FFF-printing (1)
- Fassadenfarbe (1)
- Fassadenfarben (1)
- Fenton-like reaction (1)
- Fertilizer (1)
- Festlegungen (1)
- Flexible shadow masks (1)
- Fluor XANES (1)
- Fluorescence (1)
- Fluorescent proteins (1)
- Fluoride (1)
- Fluorolytic sol-gel synthesis (1)
- Food (1)
- Force distance curve (1)
- Fungal biofilms (1)
- Fungal decay (1)
- GC-MS (1)
- Gas analysis (1)
- Genetic engineering (1)
- Genetic tools (1)
- Genome editing (1)
- Genome sequence (1)
- Geokunststoffe (1)
- Geotextiles (1)
- Geruch (1)
- Geruchsmessung (1)
- Gichtgasschlamm (1)
- Giulio Romano (1)
- Gleichwertigkeit Messverfahren (1)
- Global radiation (1)
- Gut microbiota (1)
- Halogenation (1)
- Hazenite (1)
- Heat maps (1)
- Heavy metal removal (1)
- Heavy metals (1)
- Hi-Tension (1)
- High resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) (1)
- Holy Family (1)
- Holzschutz (1)
- Holzschutz, (1)
- Honeybee (1)
- Host and symbiont ecology (1)
- Host immunity (1)
- Human plasma (1)
- Hydraulic reactivity (1)
- Hyperbranched polymer (1)
- Hypermutation (1)
- ICP-OES (1)
- IPM in museums (1)
- ISO REMCO (1)
- ISO22196 (1)
- Igg (1)
- Immunoglobulins (1)
- Immunoprecipitation (1)
- In-situ analysis (1)
- Indoor air quality (1)
- Indoor emission (1)
- Industrial applications (1)
- Ink (1)
- Interlaboratory comparison (1)
- Iron oxide (1)
- Joint grouts (1)
- Klimaneutralität (1)
- Klärschlammasche (1)
- Knufia petricola (1)
- Kreislaufwirtschaft (1)
- Kulturelle Entomologie (1)
- Kunstrasen (1)
- Kunststoffsportbeläge (1)
- Library pests (1)
- Life history data (1)
- Linker (1)
- MOF (1)
- Manuscript studies (1)
- Manuskripte (1)
- Marek's Disease Virus (1)
- Marine littering (1)
- Mask fabrication (1)
- Mechanochemical treatment (1)
- Mechanochemistry (1)
- Metabolic engineering (1)
- Microbial abundance (1)
- Microbiologically influenced corrosion (MIC) (1)
- Micromonospora aurantiaca (1)
- Micropatterning (1)
- Mineral (1)
- Moisture performance (1)
- Municipal solid waste (1)
- N and K analog tracer (1)
- NAP-XPS (1)
- Nano CRM (1)
- Nano-materials (1)
- Nanomaterials (1)
- Nanoparticles (1)
- Nassaufbereitung (1)
- Natural abundance of 15N (1)
- Natural durability (1)
- Near ambient x-ray photoelectron spectroscopy (1)
- Next generation sequencing (1)
- Nickel (1)
- Nitrogen (1)
- Nitrogen fixation (1)
- Nitrogen uptake (1)
- Non-vitriolic iron-gall inks (1)
- Nonspecific binding (NSB) (1)
- Norm (1)
- Nuclear waste disposal (1)
- Nutrient cycles (1)
- Nutrient uplift and recyclin (1)
- Nährstoffe (1)
- Oddy test (1)
- Odour (1)
- P speciation (1)
- P-efficiency (1)
- PFAS analysis (1)
- Paints (1)
- Papier (1)
- Papyrus (1)
- Particle emission (1)
- Particle size distribution (1)
- Particles (1)
- Parylene C (1)
- Pathogen virulence (1)
- Pentimenti (1)
- Per- and polyfluorinated alkly substances (PFASs) (1)
- Periodate oxidation (1)
- Permeability (1)
- Phosphate dynamics (1)
- Phosphate extractability and availability (1)
- Phosphonic acids (1)
- Phosphor-Rückgewinnung (1)
- Phosphorous recovery (1)
- Phosphorus elimination (1)
- Phosphous recovery (1)
- Photometric P determination (1)
- Photoperception (1)
- Pigments (1)
- Plastic degradation (1)
- Plastic waste (1)
- Polymer (1)
- Polymer foils (1)
- Polymerase mutant (1)
- Portland Cement (1)
- Portrayal of St Joseph (1)
- Probiotic-based vaccines (1)
- Probiotics (1)
- Projekte (1)
- Proofreading deficient (1)
- Protein (1)
- Protein a (1)
- Protein hydrolysis (1)
- Protein immobilization (1)
- Protein quantification (1)
- Pseudomonas fluorescens (1)
- Pseudomonas veronii (1)
- Pyrolysis (1)
- QA/QC (1)
- Quality assurance (1)
- Raman spectroscopy (1)
- Raphael school (1)
- Reactive oxygen species (1)
- Recycled sources (1)
- Red mud (1)
- Redensarten (1)
- Reference nanoparticles (1)
- Reference samples (1)
- Reflectography (1)
- Rembrandt (1)
- Resistance model (1)
- Ressourcenrückgewinnung (1)
- Reworking (1)
- Rhizosphere (1)
- Risikobewertung (1)
- Risk assesment (1)
- Rock-inhabiting black fungi (1)
- Rock-inhabiting fungus (1)
- Rotschlamm (1)
- Ruthenium (1)
- Rückgewinnung (1)
- SAXS (1)
- SDS-PAGE (1)
- Scandium (1)
- Scanning micro-X-ray fluorescence (1)
- Schadstofftransfer (1)
- Schlacke (1)
- Scribal corrections (1)
- Sekundärrohstoff (1)
- Sekundärrohstoffe (1)
- Selection (1)
- Self-assembled monolayer (SAM) (1)
- Self-assembled monolayers (SAM) (1)
- Sewage sludge disposal (1)
- Sewage sludge incineration (1)
- Signal transduction (1)
- Silver (1)
- Sixteenth-century painting technique (1)
- Size (1)
- Soils (1)
- Solid phase (1)
- Solid phase extraction (SPE) (1)
- Solid-liquid extraction (1)
- Solid-phase extraction (SPE) (1)
- Solvolysis (1)
- Spectroscopy (1)
- Sprache (1)
- Standardarbeitsanweisungen (1)
- Standardisierung (1)
- Subsoil nutrient tracing (1)
- Substance release (1)
- Sum parameter analysis (1)
- Surface functionalization (1)
- Synthesis (1)
- Synthetic metabolism (1)
- TEM (1)
- Tems (1)
- Termite control (1)
- Test guideline (1)
- Test method (1)
- Thermische Abfallbehandlung (1)
- Thermochemische Prozesse (1)
- Torah scrolls (1)
- Tripartite interactions (1)
- Tyrosine (1)
- Ultrafine particles (1)
- Umwelt (1)
- Umweltbewertung (1)
- Umweltsimulation (1)
- Umweltverträglichkeit (1)
- Up-cycling (1)
- VOC-Emission (1)
- Vasari (1)
- Vergleichende Linguistik (1)
- Versuchskampagne (1)
- Vitriolic iron-gall inks (1)
- Volatile organic compound (1)
- Volatile organic compounds (1)
- Volatile organic compounds (VOC) (1)
- Water atmosphere (1)
- Water uptake (1)
- Weathering (1)
- White-rot fungi (1)
- Wiederholbarkeit (1)
- Workflows (1)
- X-ray absorption near-edge structure (XANES) spectroscopy (1)
- X-ray diffraction (1)
- X-ray diffraction (XRD) (1)
- Yeast (1)
- ZIF-8 (1)
- Zeichnungen (1)
- Zinc (1)
- Zink (1)
- biocide tolerance (1)
- disinfection (1)
- evolution (1)
- fertilizer (1)
- iChip (1)
- individual-based modelling (1)
- infrared spectroscopy (1)
- ink (1)
- papyrus (1)
- thermochemische Behandlung (1)
- Ökotoxizität (1)
- Ökotoxtests (1)
Organisationseinheit der BAM
- 4 Material und Umwelt (166)
- 4.1 Biologische Materialschädigung und Referenzorganismen (44)
- 4.3 Schadstofftransfer und Umwelttechnologien (37)
- 4.2 Material-Mikrobiom Wechselwirkungen (30)
- 4.4 Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung (24)
- 4.0 Abteilungsleitung und andere (23)
- 6 Materialchemie (15)
- 1 Analytische Chemie; Referenzmaterialien (13)
- 4.5 Kunst- und Kulturgutanalyse (11)
- 6.1 Oberflächen- und Dünnschichtanalyse (6)
Paper des Monats
- ja (5)
Eingeladener Vortrag
- nein (61)
The processing of laser-induced periodic surface structures (LIPSS) represents a simple and robust way for the nanostructuring of solids that allows creating a wide range of surface functionalities featuring applications in optics, tribology, medicine, energy technologies, etc. While the currently available laser and scanner technology already allows surface processing rates at the m2/min level, industrial applications of LIPSS are sometimes hampered by the complex interplay between the nanoscale surface topography and the specific surface chemistry. This typically manifests in difficulties to control the processing of LIPSS and in limitations to ensure the long-term stability of the created surface functions. This presentation aims to identify some unsolved scientific problems related to LIPSS, discusses the pending technological limitations, and sketches the current state of theoretical modelling. Hereby, it is intended to stimulate further research and developments in the field of LIPSS for overcoming these limitations and for supporting the transfer of the LIPSS technology into industry.
Here, we describe an optimized fast and simple extraction method for the determination of per- and polyfluorinated alkyl substances (PFASs) in soils utilizing high resolution-continuum source-graphite furnace molecular absorption spectrometry (HR–CS–GFMAS). To omit the bias of the solid phase extraction (SPE) step commonly used during the analysis of extractable organically bound fluorine (EOF) we optimized a fast and simple SPE-free extraction method. The developed extraction method consists of a liquid-solid extraction using acidified methanol without any additional SPE. Four extraction steps were representative to determine a high proportion of the EOF (>80% of eight extractions). Comparison of the optimized method with and without an additional SPE clean-up step revealed a drastic underestimation of EOF concentrations using SPE. Differences of up to 94% were observed which were not explainable by coextracted inorganic fluoride. Therefore, not only a more accurate but also a more economic as well as ecologic method (bypassing of unnecessary SPE) was developed. The procedural limit of quantification (LOQ) of the developed method was 10.30 μg/kg which was sufficient for quantifying EOF concentrations in all tested samples. For future PFAS monitoring and potential regulative decisions the herein presented optimized extraction method can offer a valuable contribution.
Quaternary ammonium compounds (QACs) are widely used as active agents in disinfectants, antiseptics, and preservatives. Despite being in use since the 1940s, there remain multiple open questions regarding their detailed mode-of-action and the mechanisms, including phenotypic heterogeneity, that can make bacteria less susceptible to QACs. To facilitate studies on resistance mechanisms towards QACs, we synthesized a fluorescent quaternary ammonium compound, namely N-dodecyl-N,N-dimethyl-[2-[(4-nitro-2,1,3-benzoxadiazol-7-yl)amino]ethyl]azanium-iodide (NBD-DDA). NBD-DDA is readily detected by flow cytometry and fluorescence microscopy with standard GFP/FITC-settings, making it suitable for molecular and single-cell studies. As a proof-of-concept, NBD-DDA was then used to investigate resistance mechanisms which can be heterogeneous among individual bacterial cells. Our results reveal that the antimicrobial activity of NBD-DDA against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa is comparable to that of benzalkonium chloride (BAC), a widely used QAC, and benzyl-dimethyl-dodecylammonium chloride (BAC12), a mono-constituent BAC with alkyl-chain length of 12 and high structural similarity to NBD-DDA. Characteristic time-kill kinetics and increased tolerance of a BAC tolerant E. coli strain against NBD-DDA suggest that the mode of action of NBD-DDA is similar to that of BAC. As revealed by confocal laser scanning microscopy (CLSM), NBD-DDA is preferentially localized to the cell envelope of E. coli, which is a primary target of BAC and other QACs. Leveraging these findings and NBD-DDA‘s fluorescent properties, we show that reduced cellular accumulation is responsible for the evolved BAC tolerance in the BAC tolerant E. coli strain and that NBD-DDA is subject to efflux mediated by TolC. Overall, NBD-DDA’s antimicrobial activity, its fluorescent properties, and its ease of detection render it a powerful tool to study resistance mechanisms of QACs in bacteria and highlight its potential to gain detailed insights into its mode-of-action.
The main obstacle to bottom ash (BA) being used as a recycling aggregate is the content of salts and potential toxic elements (PTEs), concentrated in a layer that coats BA particles. This work presents a dry treatment for the removal of salts and PTEs from BA particles. Two pilotscale abrasion units (with/without the removal of the fine particles) were fed with different BA samples. The performance of the abrasion tests was assessed through the analyses of particle size and moisture, and that of the column leaching tests at solid-to-liquid ratios between 0.3 and 4. The results were: the particle-size distribution of the treated materials was homogeneous (25 wt % had dimensions <6.3 mm) and their moisture halved, as well as the electrical conductivity of the leachates. A significant decrease was observed in the leachates of the treated BA for sulphates (44%),
chlorides (26%), and PTEs (53% Cr, 60% Cu and 8% Mo). The statistical analysis revealed good correlations between chloride and sulphate concentrations in the leachates with Ba, Cu, Mo, and Sr, illustrating the consistent behavior of the major and minor components of the layer surrounding BA particles. In conclusion, the tested process could be considered as promising for the improvement of BA valorization.
The halophilic γ-proteobacterium Halomonas elongata DSM 2581T thrives at salt concentrations well above 10 % NaCl (1.7 M NaCl). A well-known osmoregulatory mechanism is the accumulation of the compatible solute ectoine within the cell in response to osmotic stress. While ectoine accumulation is central to osmoregulation and promotes resistance to high salinity in halophilic bacteria, ectoine has this effect only to a much lesser extent in non-halophiles. We carried out transcriptome analysis of H. elongata grown on two different carbon sources (acetate or glucose), and low (0.17 M NaCl), medium (1 M), and high salinity (2 M) to identify additional mechanisms for adaptation to high saline environments. To avoid a methodological bias, the transcripts were evaluated by applying two methods, DESeq2 and Transcripts Per Million (TPM). The differentially transcribed genes in response to the available carbon sources and salt stress were then compared to the transcriptome profile of Chromohalobacter salexigens, a closely related moderate halophilic bacterium. Transcriptome profiling supports the notion that glucose is degraded via the cytoplasmic Entner-Doudoroff pathway, whereas the Embden-Meyerhoff-Parnas pathway is employed for gluconeogenesis. The machinery of oxidative phosphorylation in H. elongata and C. salexigens differs greatly from that of non-halophilic organisms, and electron flow can occur from quinone to oxygen along four alternative routes. Two of these pathways via cytochrome bo' and cytochrome bd quinol oxidases seem to be upregulated in salt stressed cells. Among the most highly regulated genes in H. elongata and C. salexigens are those encoding chemotaxis and motility proteins, with genes for chemotaxis and flagellar assembly severely downregulated at low salt concentrations. We also compared transcripts at low and high-salt stress (low growth rate) with transcripts at optimal salt concentration and found that the majority of regulated genes were down-regulated in stressed cells, including many genes involved in carbohydrate metabolism, while ribosome synthesis was up-regulated, which is in contrast to what is known from non-halophiles at slow growth. Finally, comparing the acidity of the cytoplasmic proteomes of non-halophiles, extreme halophiles and moderate halophiles suggests adaptation to an increased cytoplasmic ion concentration of H. elongata. Taken together, these results lead us to propose a model for salt tolerance in H. elongata where ion accumulation plays a greater role in salt tolerance than previously assumed.
Der Fachbeirat kommt bereits seit 13 Jahren in seiner jetzigen Form zusammen, um Zulassungsrichtlinien, weitere Dokumente und fachliche Fragestellungen zu beraten. Die Zeit bringt auch personelle Veränderungen mit sich, darüber wollen wir berichten. Derzeit wird die Zulassungsrichtlinie für Schutzschichten im Fachbeirat und in seiner Arbeitsgruppe Geotextilien und Kunststoff Dränelemente (AG Geotextilien) überarbeitet. Zudem wurde die Zulassungsrichtlinie für Kunststoffdichtungsbahnen auf den aktuellen Stand der Regelsetzung und Normung gebracht. Bestimmte Medien, die hier bei einigen Prüfungen verwendet werden, dürfen nicht mehr in der EU in Verkehr gebracht werden. Hier werden die Hintergründe und Zusammenhänge in Kürze aufgezeigt. Zuletzt wird die Diskussion in Bezug auf den Einsatz von Rezyklaten in den zugelassenen Produkten aufgeführt.
Der Fachbeirat kommt bereits seit 13 Jahren in seiner jetzigen Form zusammen, um Zulassungsrichtlinien, weitere Dokumente und fachliche Fragestellungen zu beraten. Die Zeit bringt auch personelle Veränderungen mit sich, darüber wollen wir berichten. Derzeit wird die Zulassungsrichtlinie für Schutzschichten im Fachbeirat und in seiner Arbeitsgruppe Geotextilien und Kunststoff Dränelemente (AG Geotextilien) überarbeitet. Zudem wurde die Zulassungsrichtlinie für Kunststoffdichtungsbahnen auf den aktuellen Stand der Regelsetzung und Normung gebracht. Bestimmte Medien, die hier bei einigen Prüfungen verwendet werden, dürfen nicht mehr in der EU in Verkehr gebracht werden. Hier werden die Hintergründe und Zusammenhänge in Kürze aufgezeigt. Zuletzt wird die Diskussion in Bezug auf den Einsatz von Rezyklaten in den zugelassenen Produkten aufgeführt.
Analyseverfahren und Messhäufigkeit zur Bestimmung des Phosphorgehalts im Klärschlamm nach AbfKlärV
(2022)
Auf dem Betreiberforum der DWA-Plattform P-Rück wurden die Empfehlungen für den Vollzug der Phosphorrückgewinnungspflicht aus Klärschlamm vorgestellt. Diese Empfehlungen behandeln die Häufigkeit der Phosphoruntersuchungen im Klärschlamm, wo ein Jahresgang empfohlen wird und eine Empfehlung der Phosphorbestimmung über Aufschluss der Probe in der Mikrowelle und Messung mit ICP-OES. Untermauert wurden die Empfehlungen mit den Ergebnissen von Klärschlamm-Monitoring, Ringversuch und Analytikvergleich aus dem Vorhaben extraWERT.
Quantitative chemical analysis of airborne particulate matter (PM) is vital for the understanding of health effects in indoor and outdoor environments, as well as for enforcing air quality regulations. Typically, airborne particles are sampled over long time periods on filters, followed by lab-based analysis, e.g., with inductively coupled plasma mass spectrometry (ICP-MS). Within the EURAMET EMPIR AEROMET project, cascade impactor aerosol sampling was combined for the first time with on-site total reflection X-ray fluorescence (TXRF) spectroscopy to develop a tool for quantifying particle element compositions within short time intervals and even on-site. This makes variations of aerosol chemistry observable with time resolution of only a few hours and with good size resolution in the PM10 range. A proof of principles of this methodological approach and the comparison to standard methods within the scope of a field campaign will be presented. Secondly, aerosol sampling and TXRF analysis seems suitable for the quantification of elements in indoor aerosols as well and may provide an important enhancement of existing methods for the analysis of organic species in aerosols (such as sampling and TD-GC/MS). As an example, the TXRF analysis of particles emitted from laser printers under controlled conditions in an environmental test chamber will be presented.
Per- and polyfluoroalkyl substances (PFAS) have emerged over the course of the last twenty years as a global pollution issue. Altogether, there are currently more than 4700 known but only partly characterized fluorinated compounds identified by the Organization for Economic Cooperation and Development (OECD), as shown by a recently published classification proposal.
The ongoing production of new, yet unrestricted PFAS alternatives has become a major challenge for environmental routine analytics, since the state-of-the-art method LC-MS/MS relies on structural information and availability of isotope standards of the targeted compound. First reported by Miyake et al., fluorine sum parameters like adsorbable organic fluorine (AOF), extractable organic fluorine (EOF) and total fluorine (TF) can be applied to survey and detect the presence of large amounts of unidentified organofluorine compounds in environmental matrices. Today fluorine sum parameters have been established as a useful supplement to classic target-analytical approaches of PFAS and were implemented for the first time as a sum value “PFAS-total” in the recently revised Drinking Water Directive (2020/2184) by the European Commission.
In contrast, X-ray absorption near-edge structure (XANES) spectroscopy has been widely applied to identify low concentration of element-specific contamination without pre-treatment in environmental samples in the past. The XANES approach enables a penetration depth of approx. 1 µm (at fluorine K-edge energy; depending on the matrix) which is significantly deeper than for X-ray photoelectron spectroscopy (XPS; penetration depth approx. 10 nm). Furthermore, the method is fast, non-destructive and only simple preparation of the samples is required.
In our work, we combined both F-XANES spectroscopy and combustion ion chromatography (CIC) in order to present a new analytical perspective on the investigation of PFAS in environmental media and material samples.
Analytical Challenges for PFAS in Environmental Samples - Methods, Approaches and Applicability
(2022)
Per- and polyfluoroalkyl substances (PFAS) are anionic, cationic and zwitterionic synthetic products, in which the hydrogen atoms on the carbon skeleton of at least one carbon atom have been completely replaced by fluorine atoms and which include up to 1.7 M compounds, depending on the definition. As a result of continuous and prolific use, mainly in aviation firefighting foams, thousands of industrial and military installations have been found to contain contaminated soil, groundwater and surface water. Furthermore, because of the continuous contamination through PFAS containing commercial products, effluents and sewage sludge from WWTPs have been shown to be an important source of PFAS discharge into the aquatic environment. In the last few years, legacy PFAS (≥C4) have been found in various environments, including soil, water and wastewater, and their environmental pathways have been partly described.
Several long-chain PFAS species, and their respective salts are considered as persistent organic pollutants by the United Nations Stockholm Convention. These pollutants have been linked to altered immune and thyroid function, liver disease, lipid and insulin dysregulation, kidney disease, adverse reproductive and developmental outcomes, and cancer. A significant shift in the chemical industry towards production of short (C4-C7) and ultrashort (C1-C3) alternatives was observed in response to recently intensified regulations and restrictions on the use of long-chain (≥C8) PFAS. PFAS analysis in environmental samples is currently mainly done by liquid chromatography tandem mass spectrometry (LC-MS/MS). This efficient method is conducted in a targeted fashion analyzing a small subset of PFAS. The US EPA method for analysis of PFAS using LC-MS/MS for example currently lists 40 PFAS (≥C4). However, to get a better overview of the amount of “total PFAS,” sum parameter methods like total oxidizable precursor (TOP) assay and methods based on combustion ion chromatography (CIC) are in development. CIC results in data regarding the sum of absorbable organic fluorine (AOF) or extractable organic fluorine (EOF), which can also quantify other organically bound fluorine compounds such as fluorinated pesticides and pharmaceutical. Moreover, non-target and suspect screening mass spectrometry can be used to identify novel emerging PFAS and partly unknown fluorinated compounds in environmental samples. Furthermore, to analyze ultrashort PFAS (C1-C3), supercritical fluid chromatography (SFC), hydrophilic interaction chromatography (HILIC) and gas chromatography-mass spectrometry (GC-MS) are available, but further research is needed to develop reliable and accurate methods to quantify several ultrashort PFAS in environmental samples.
Additionally, for research purpose several spectroscopical methods like X-ray photoelectron spectroscopy (XPS), fluorine K-edge X-ray absorption near-edge structure (XANES)spectroscopy, particular induced gamma-ray emission (PIGE) spectroscopy and 19F nuclear magnetic resonance (NMR) spectroscopy are available.
Cellulose ethers, like methyl cellulose (MC) or hydroxypropyl cellulose (HPC), are widely used in conservation. They also occur as additives and rheology modifiers in various products like dispersions or gels. Do such products release harmful volatile organic compounds (VOC) during their accelerated aging? A mass testing series utilizing the Oddy test of 60 commercial cellulose ethers ranks the products in safe for permanent use (P, no corrosion), only for temporary use (T, slight corrosion), and unsuitable at all (F, heavy corrosion). Results show that 55% of the products passed the test whereas 33% are for temporary use as slight corrosion occurred on at least one metal coupon and only 11% failed the Oddy test. Raman measurements of the corrosion products identified oxides like massicot, litharge, cuprite, and tenorite among carbonates (hydrocerussite, plumbonacrite), and acetates like basic lead acetate, lead acetate trihydrate as well as lead formate as main phases. For example, commercial, industrial Klucel® G (HPC) scored a T rating through slight corrosion on the lead coupon. Basic lead acetate among other phases indicates the presence of acetic acid. Additional measurements of the sample with thermal desorption GC–MS utilizing the BEMMA scheme confirm the high acetic acid outgassing and reveal the presence of a small amount of formaldehyde.
Aschen und Schlacken und aus der Abfallverbrennung, chemische und mineralogische Zusammensetzung
(2022)
Aschen und Schlacken sind mengenmäßig der wichtigste Reststoffstrom in der thermischen Abfallbehandlung. Die enthaltenen elementaren Metalle werden mit gängigen Verfahren abgetrennt und einer Verwertung als Sekundärrohstoff zugeführt. Durch die chemische und mineralogische Zusammensetzung der mineralischen Fraktion wird das Umweltverhalten sowie die abfallrechtliche Einstufung bestimmt. Methoden zur Ermittlung der Einstufung werden vorgestellt. Das Löslichkeitsverhalten von Schwermetallen in gealterten Aschen hängt meist vom pH-Wert in den standardisierten Auslaugtests ab. Das davon abweichende Verhalten von Antimon wird detailliert beschrieben.
Assessing co-selection of biocide and antibiotic resistance in wastewater microbial communities
(2022)
Biocides are used for a wide range of purposes, including disinfectants or preservatives. Biocides play a major role in the prevention of microbial infections in healthcare and animal husbandry. The use of biocides often leads to the discharge of active biocidal substances into wastewater streams, causing the exposure of wastewater microbial communities to subinhibitory concentrations. In turn, it is known that wastewater treatment plants (WWTP) are hotspots for antibiotic resistant bacteria. Since similar mechanisms confer resistance to biocides and antibiotics, exposure to biocides can result in co-selection of antibiotic resistant bacteria in WWTP due to biocides. Here, we investigate the magnitude and the drivers of co-selection of antibiotic resistance in natural wastewater microbial communities upon biocide exposure. Microbial communities will be sampled at the WWTP Ruhleben in Berlin and characterized regarding their biocide and antibiotic resistance. Changes in the resistance level after exposure to different biocides will be determined by enumerating resistant and non-resistant E. coli and heterotrophic bacteria on selective plates with and without several biocides and antibiotics. Moreover, we are establishing a synthetic community comprising about 100 environmental E. coli isolates each with different antimicrobial resistance traits. Each isolate will be tagged with a unique DNA-barcode. All isolates will be pooled and exposed to different biocides at various concentrations. The barcode labeling enables us to determine the abundance of each isolate at the beginning and end of the experiment by transposon-tag sequencing. The project results will inform risk assessment of the effects of biocidal residues on antimicrobial resistance selection in WWTP.
The project is part of the BIOCIDE consortium funded within the call on Aquatic pollutants by JPI-AMR, JPI-OCEANS and JPI-WATER.
Question
Disinfectants and antimicrobial surfaces (AMCs) are important tools to prevent the spread of pathogens and antimicrobial resistant bacteria. However, concerns have been raised about the possibility for the evolution and selection of resistance against disinfectants and AMCs. In turn, resistance against disinfectants and AMCs can be associated to antibiotic resistance due to cross-resistance - a single mechanism conferring resistance to a disinfectant and an antibiotic- and co-resistance - two distinct mechanisms physically linked on e.g. a plasmid. The risk for resistance and cross-resistance during use of biocides (including disinfectants and AMCs) must be evaluated during authorization according to the EU biocidal product regulation. However, to date there is a lack of standardized methods that support risk assessment during the authorization process.
Methods
We used adaptive laboratory evolution (ALE) experiments which are based on repeated exposure of bacteria to disinfectants or AMCs. The experiments are followed by phenotypic (antimicrobial susceptibility testing) and genotypic (whole genome sequencing) characterization of the evolved strains. The basic idea of these experiments is to expose bacteria to lethal conditions and select for mutants with increased survival. This approach is fundamentally different to other ALE experiments, which commonly select for increased growth at subinhibitory concentrations. However, selection for increased survival represents a selective pressure that more realistically reflects selection under in-use conditions of disinfectants and AMCs.
Results
First, we studied adaptation of E. coli during repeated disinfection with benzalkonium chloride in a suspension assay. The experiments showed a 2000-fold increase in survival within 5 exposure cycles. The adaptive changes are linked to highly parallel mutations in genes related to lipid A biosynthesis, less negative cell surface charge, reduced growth rate and increased competitive ability in the presence of certain antibiotics. We use the same approach to develop standardizable ALE experiments based upon accepted standards that are used to determine the efficacy of disinfectants (EN 13697) and antimicrobial surfaces (ISO 22196). The results highlight pronounced adaptation of different test strains towards surface disinfection (benzalkonium chloride and isopropanol) and AMCs (copper).
Conclusion
Bacteria can adapt with increased survival towards lethal stress imposed by disinfectants and AMCs. The adaptive ability of bacteria to disinfectants and AMCs can be determined in a standardized manner.
In Deutschland ist ab 2029 eine Phosphorrückgewinnung aus Klärschlamm verpflichtend. Ausgenommen sind Klärschlämme mit weniger als 20 g P/kg TM. Für die Phosphorbestimmung sind verschiedene Methoden nach Klärschlammverordnung als gleichwertig zugelassen: Der Königswasseraufschluss in der Mikrowelle und am Rückfluss sowie die Messung an ICP-OES, ICP-MS und die photometrische Bestimmung mittels Ammoniummolybdaten. An der BAM wurden die unterschiedlichen Methodenkombinationen aus Aufschluss- und Messmethode an 15 Klärschlämmen überprüft und in einem Ringversuch mit einem Klärschlamm getestet. Die Ergebnisse werden in diesem Vortrag zusammengefasst. Als Folge der Untersuchungen wird für die Phosphorbestimmung in Klärschlamm die ICP-OES-Messung nach Königswasseraufschluss in der Mikrowelle empfohlen.