4 Material und Umwelt
Filtern
Erscheinungsjahr
- 2022 (166) (entfernen)
Dokumenttyp
Schlagworte
- Biocides (17)
- Antimicrobial resistance (11)
- Leaching (7)
- Klärschlamm (6)
- Wastewater (6)
- Biofilms (5)
- Disinfection (5)
- Phosphorrückgewinnung (5)
- Risk assessment (5)
- Sewage sludge (5)
- Antimicrobial coating (4)
- Archäometrie (4)
- Bacteria (4)
- Cascade impactor (4)
- Evolution (4)
- Horizontal gene transfer (4)
- Mutation rate (4)
- Nano (4)
- PFAS (4)
- Phosphorus recovery (4)
- Transformation (4)
- VOC (4)
- XANES spectroscopy (4)
- Affinity chromatography (3)
- Anerkennungen (3)
- Antibodies (3)
- Bauprodukte (3)
- Biocide tolerance (3)
- Carbon steel corrosion (3)
- Construction products (3)
- EN 16516 (3)
- ISO 16000-6 (3)
- Ir DNA staining approach (3)
- Laser-induced periodic surface structures (LIPSS) (3)
- Method development (3)
- Microbiological influenced corrosion MIC (3)
- Passive sampling (3)
- Per- and Polyfluoroalkyl substances (PFAS) (3)
- Persistence (3)
- Phosphor (3)
- Polyethylene (3)
- Polyglycerol (3)
- Recycling (3)
- Ringversuch (3)
- Rostasche (3)
- Sc-ICP-ToF-MS (3)
- Single cell (3)
- Standardization (3)
- Struvite (3)
- VVOCs (3)
- Zement (3)
- Zulassungen (3)
- Abdichtungssystem (2)
- Abfallverbrennung (2)
- Aerosol (2)
- Air quality monitoring (2)
- Analytical method (2)
- Antimicrobial surfaces (2)
- Bacterial adhesion tests (2)
- Bio-weathering (2)
- Biocide (2)
- Biozide (2)
- Cairo Genizah (2)
- Capsules (2)
- Combustion ion chromatography (2)
- DHN melanin (2)
- Deponie (2)
- Diffusive sampling (2)
- Düngemittel (2)
- Dünger (2)
- Fungi (2)
- Fungus (2)
- Genetics (2)
- Geosynthetics (2)
- Glutaraldehyde (2)
- Herculaneum (2)
- Heterogeneity (2)
- IAQ (2)
- ICP-MS (2)
- Ink analyses (2)
- Klärschlammverordnung (2)
- Light (2)
- MIC (2)
- Material emissions (2)
- Melanin (2)
- Microbiota (2)
- Microcolonial fungi (2)
- Middle Ages (2)
- Mikroplastik (2)
- Nanomaterial (2)
- Nanoparticle (2)
- OECD (2)
- Osmoadaptation (2)
- Perceived Intensity (2)
- Phosphorus (2)
- Purification (2)
- Reductive amination (2)
- Reference material (2)
- Reference materials (2)
- Reproduzierbarkeit (2)
- Resistance (2)
- Richtlinien (2)
- Round robin test (2)
- Sapphire (2)
- Schutzschichten (2)
- Sewage sludge ash (2)
- Soil (2)
- Stress (2)
- TXRF (2)
- Thermal extraction (2)
- Tolerance (2)
- UFP (2)
- Uptake rate (2)
- Wood protection (2)
- X-Ray fluorescence analyses (2)
- XRF (2)
- Zeichenmaterialien (2)
- Zerstörungsfreie Prüfung (2)
- (Semi)arid to humid-temperate natural ecosys (1)
- A key interface (1)
- AEROMET II (1)
- Adaption (1)
- Affinity extraction (1)
- Affinity support (1)
- Ag-LDI-MS (1)
- Ageing (1)
- Aluminum oxide (1)
- Amate (1)
- Amino acid analysis (1)
- Analytische Methode (1)
- Animal immune system (1)
- Antiadhesive surfaces (1)
- Antibiotic resisitance (1)
- Antibody purification (1)
- Antimikrobielle Resistenz (1)
- Antimony black (stibnite) (1)
- Antmikrobielle Oberflächen (1)
- Aquatische Toxizität (1)
- Aqueous synthesis (1)
- Aromatic amino acid analysis AAAA (1)
- Aromatic amino acid analysis aaaa (1)
- AshDec (1)
- Ashdec (1)
- Assessment (1)
- Atomic force microscopy (1)
- Autoclave tests (1)
- Autoklaventest (1)
- BEMMA (1)
- BOFS (1)
- BSA (1)
- Bacteria repellent surfaces (1)
- Bacteria-repellent surfaces (1)
- Basidiomycetes (1)
- Basin (1)
- Bauhaus Weimar (1)
- Bauxite residue (1)
- Behavioural mechanisms (1)
- Behördenklausurtagung (1)
- Bewertungsverfahren (1)
- Bioconjugation (1)
- Biodegradation (1)
- Biofilm growth (1)
- Biological pest control (1)
- Bioseparation (1)
- Biotic environment (1)
- Biozid (1)
- Black fungi (1)
- Blattodea (1)
- Bottom ash (1)
- Bovine serum albumin (1)
- Brown-rot fungi (1)
- Building Material (1)
- Building product (1)
- Bundesoberbehörden (1)
- CIC (1)
- CaNaPO4 (1)
- Carrier (1)
- Cast iron (1)
- Cell-envelope (1)
- Cellulose ether (1)
- Chamber test (1)
- Chemical ecology (1)
- Chemical recycling (1)
- Chilean Coastal Cordillera (1)
- Circular economy (1)
- Cloning vectors (1)
- Cobalt (1)
- Combustion Ion Chromatography (1)
- Combustion and gasification (1)
- Community-level interactions (1)
- Concept (1)
- Contamination (1)
- Controllable gene expression (1)
- Corrosion (1)
- Corundum (1)
- Cribellate spiders (1)
- Cross-resistance (1)
- Crystallization (1)
- Cubical shape (1)
- Cultural heritage (1)
- Cupriavidus campinensis (1)
- Cuticular hydrocarbons (1)
- DIN (1)
- DIN EN 350 (1)
- DNA polymerase (1)
- Dauerhaftigkeit (1)
- Degradation (1)
- Dendrimer (1)
- Desiccation (1)
- Design of experiments (1)
- Diffusive gradients in thin-films (DGT) (1)
- Digitalisierung (1)
- Disinfection Fuel (1)
- Domestikation (1)
- Downstream processing (1)
- Driving rain (1)
- Dry treatment (1)
- E. coli (1)
- EOF (1)
- ESEM (1)
- Ecotoxicity (1)
- Ecotoxixity (1)
- Ectoine (1)
- Effective uptake rate (1)
- Electron microscopy (1)
- Elektronisches Laborbuch (1)
- Elektroofenstaub (1)
- Element mass concentration (1)
- Elemental aerosol analysis (1)
- Emission (1)
- Emission reference materials (1)
- Emission test chamber (1)
- Emission test chamber procedure (1)
- Emission test method (1)
- Emissionen (1)
- Emissions (1)
- Environmental assessment (1)
- Environmental impact (1)
- Ersatzbaustoffe (1)
- Ersatzbaustoffverordnung (1)
- Essential oils (1)
- Experimental evolution (1)
- Exposure risk (1)
- Extractable organically bound fluorine (EOF) (1)
- Extremotolerance (1)
- FFF-3D-Printer (1)
- FFF-filament (1)
- FFF-printing (1)
- Fassadenfarbe (1)
- Fassadenfarben (1)
- Fenton-like reaction (1)
- Fertilizer (1)
- Festlegungen (1)
- Flexible shadow masks (1)
- Fluor XANES (1)
- Fluorescence (1)
- Fluorescent proteins (1)
- Fluoride (1)
- Fluorolytic sol-gel synthesis (1)
- Food (1)
- Force distance curve (1)
- Fungal biofilms (1)
- Fungal decay (1)
- GC-MS (1)
- Gas analysis (1)
- Genetic engineering (1)
- Genetic tools (1)
- Genome editing (1)
- Genome sequence (1)
- Geokunststoffe (1)
- Geotextiles (1)
- Geruch (1)
- Geruchsmessung (1)
- Gichtgasschlamm (1)
- Giulio Romano (1)
- Gleichwertigkeit Messverfahren (1)
- Global radiation (1)
- Gut microbiota (1)
- Halogenation (1)
- Hazenite (1)
- Heat maps (1)
- Heavy metal removal (1)
- Heavy metals (1)
- Hi-Tension (1)
- High resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) (1)
- Holy Family (1)
- Holzschutz (1)
- Holzschutz, (1)
- Honeybee (1)
- Host and symbiont ecology (1)
- Host immunity (1)
- Human plasma (1)
- Hydraulic reactivity (1)
- Hyperbranched polymer (1)
- Hypermutation (1)
- ICP-OES (1)
- IPM in museums (1)
- ISO REMCO (1)
- ISO22196 (1)
- Igg (1)
- Immunoglobulins (1)
- Immunoprecipitation (1)
- In-situ analysis (1)
- Indoor air quality (1)
- Indoor emission (1)
- Industrial applications (1)
- Ink (1)
- Interlaboratory comparison (1)
- Iron oxide (1)
- Joint grouts (1)
- Klimaneutralität (1)
- Klärschlammasche (1)
- Knufia petricola (1)
- Kreislaufwirtschaft (1)
- Kulturelle Entomologie (1)
- Kunstrasen (1)
- Kunststoffsportbeläge (1)
- Library pests (1)
- Life history data (1)
- Linker (1)
- MOF (1)
- Manuscript studies (1)
- Manuskripte (1)
- Marek's Disease Virus (1)
- Marine littering (1)
- Mask fabrication (1)
- Mechanochemical treatment (1)
- Mechanochemistry (1)
- Metabolic engineering (1)
- Microbial abundance (1)
- Microbiologically influenced corrosion (MIC) (1)
- Micromonospora aurantiaca (1)
- Micropatterning (1)
- Mineral (1)
- Moisture performance (1)
- Municipal solid waste (1)
- N and K analog tracer (1)
- NAP-XPS (1)
- Nano CRM (1)
- Nano-materials (1)
- Nanomaterials (1)
- Nanoparticles (1)
- Nassaufbereitung (1)
- Natural abundance of 15N (1)
- Natural durability (1)
- Near ambient x-ray photoelectron spectroscopy (1)
- Next generation sequencing (1)
- Nickel (1)
- Nitrogen (1)
- Nitrogen fixation (1)
- Nitrogen uptake (1)
- Non-vitriolic iron-gall inks (1)
- Nonspecific binding (NSB) (1)
- Norm (1)
- Nuclear waste disposal (1)
- Nutrient cycles (1)
- Nutrient uplift and recyclin (1)
- Nährstoffe (1)
- Oddy test (1)
- Odour (1)
- P speciation (1)
- P-efficiency (1)
- PFAS analysis (1)
- Paints (1)
- Papier (1)
- Papyrus (1)
- Particle emission (1)
- Particle size distribution (1)
- Particles (1)
- Parylene C (1)
- Pathogen virulence (1)
- Pentimenti (1)
- Per- and polyfluorinated alkly substances (PFASs) (1)
- Periodate oxidation (1)
- Permeability (1)
- Phosphate dynamics (1)
- Phosphate extractability and availability (1)
- Phosphonic acids (1)
- Phosphor-Rückgewinnung (1)
- Phosphorous recovery (1)
- Phosphorus elimination (1)
- Phosphous recovery (1)
- Photometric P determination (1)
- Photoperception (1)
- Pigments (1)
- Plastic degradation (1)
- Plastic waste (1)
- Polymer (1)
- Polymer foils (1)
- Polymerase mutant (1)
- Portland Cement (1)
- Portrayal of St Joseph (1)
- Probiotic-based vaccines (1)
- Probiotics (1)
- Projekte (1)
- Proofreading deficient (1)
- Protein (1)
- Protein a (1)
- Protein hydrolysis (1)
- Protein immobilization (1)
- Protein quantification (1)
- Pseudomonas fluorescens (1)
- Pseudomonas veronii (1)
- Pyrolysis (1)
- QA/QC (1)
- Quality assurance (1)
- Raman spectroscopy (1)
- Raphael school (1)
- Reactive oxygen species (1)
- Recycled sources (1)
- Red mud (1)
- Redensarten (1)
- Reference nanoparticles (1)
- Reference samples (1)
- Reflectography (1)
- Rembrandt (1)
- Resistance model (1)
- Ressourcenrückgewinnung (1)
- Reworking (1)
- Rhizosphere (1)
- Risikobewertung (1)
- Risk assesment (1)
- Rock-inhabiting black fungi (1)
- Rock-inhabiting fungus (1)
- Rotschlamm (1)
- Ruthenium (1)
- Rückgewinnung (1)
- SAXS (1)
- SDS-PAGE (1)
- Scandium (1)
- Scanning micro-X-ray fluorescence (1)
- Schadstofftransfer (1)
- Schlacke (1)
- Scribal corrections (1)
- Sekundärrohstoff (1)
- Sekundärrohstoffe (1)
- Selection (1)
- Self-assembled monolayer (SAM) (1)
- Self-assembled monolayers (SAM) (1)
- Sewage sludge disposal (1)
- Sewage sludge incineration (1)
- Signal transduction (1)
- Silver (1)
- Sixteenth-century painting technique (1)
- Size (1)
- Soils (1)
- Solid phase (1)
- Solid phase extraction (SPE) (1)
- Solid-liquid extraction (1)
- Solid-phase extraction (SPE) (1)
- Solvolysis (1)
- Spectroscopy (1)
- Sprache (1)
- Standardarbeitsanweisungen (1)
- Standardisierung (1)
- Subsoil nutrient tracing (1)
- Substance release (1)
- Sum parameter analysis (1)
- Surface functionalization (1)
- Synthesis (1)
- Synthetic metabolism (1)
- TEM (1)
- Tems (1)
- Termite control (1)
- Test guideline (1)
- Test method (1)
- Thermische Abfallbehandlung (1)
- Thermochemische Prozesse (1)
- Torah scrolls (1)
- Tripartite interactions (1)
- Tyrosine (1)
- Ultrafine particles (1)
- Umwelt (1)
- Umweltbewertung (1)
- Umweltsimulation (1)
- Umweltverträglichkeit (1)
- Up-cycling (1)
- VOC-Emission (1)
- Vasari (1)
- Vergleichende Linguistik (1)
- Versuchskampagne (1)
- Vitriolic iron-gall inks (1)
- Volatile organic compound (1)
- Volatile organic compounds (1)
- Volatile organic compounds (VOC) (1)
- Water atmosphere (1)
- Water uptake (1)
- Weathering (1)
- White-rot fungi (1)
- Wiederholbarkeit (1)
- Workflows (1)
- X-ray absorption near-edge structure (XANES) spectroscopy (1)
- X-ray diffraction (1)
- X-ray diffraction (XRD) (1)
- Yeast (1)
- ZIF-8 (1)
- Zeichnungen (1)
- Zinc (1)
- Zink (1)
- biocide tolerance (1)
- disinfection (1)
- evolution (1)
- fertilizer (1)
- iChip (1)
- individual-based modelling (1)
- infrared spectroscopy (1)
- ink (1)
- papyrus (1)
- thermochemische Behandlung (1)
- Ökotoxizität (1)
- Ökotoxtests (1)
Organisationseinheit der BAM
- 4 Material und Umwelt (166) (entfernen)
Paper des Monats
- ja (5)
Eingeladener Vortrag
- nein (61)
Plants and microorganisms, besides the climate, drive nitrogen (N) cycling in ecosystems. Our objective was to investigate N losses and N acquisition strategies along a unique ecosystem-sequence (ecosequence) ranging from arid shrubland through Mediterranean woodland to temperate rainforest. These ecosystems differ in mean annual precipitation, mean annual temperate, and vegetation cover, but developed on similar granitoid soil parent material, were addressed using a combination of molecular biology and soil biogeochemical tools. Soil N and carbon (C) contents, δ15N signatures, activities of N acquiring extracellular enzymes as well as the abundance of soil bacteria and fungi, and diazotrophs in bulk topsoil and rhizosphere were determined. Relative fungal abundance in the rhizosphere was higher under woodland and forest than under shrubland. This indicates toward plants' higher C investment into fungi in the Mediterranean and temperate rainforest sites than in the arid site. Fungi are likely to decompose lignified forest litter for efficient recycling of litter-derived N and further nutrients. Rhizosphere—a hotspot for the N fixation—was enriched in diazotrophs (factor 8 to 16 in comparison to bulk topsoil) emphasizing the general importance of root/microbe association in N cycle. These results show that the temperate rainforest is an N acquiring ecosystem, whereas N in the arid shrubland is strongly recycled. Simultaneously, the strongest 15N enrichment with decreasing N content with depth was detected in the Mediterranean woodland, indicating that N mineralization and loss is highest (and likely the fastest) in the woodland across the continental transect. Higher relative aminopeptidase activities in the woodland than in the forest enabled a fast N mineralization. Relative aminopeptidase activities were highest in the arid shrubland. The highest absolute chitinase activities were observed in the forest. This likely demonstrates that (a) plants and microorganisms in the arid shrubland invest largely into mobilization and reutilization of organically bound N by exoenzymes, and (b) that the ecosystem N nutrition shifts from a peptide-based N in the arid shrubland to a peptide- and chitin-based N nutrition in the temperate rainforest, where the high N demand is complemented by intensive N fixation in the rhizosphere.
The main obstacle to bottom ash (BA) being used as a recycling aggregate is the content of salts and potential toxic elements (PTEs), concentrated in a layer that coats BA particles. This work presents a dry treatment for the removal of salts and PTEs from BA particles. Two pilotscale abrasion units (with/without the removal of the fine particles) were fed with different BA samples. The performance of the abrasion tests was assessed through the analyses of particle size and moisture, and that of the column leaching tests at solid-to-liquid ratios between 0.3 and 4. The results were: the particle-size distribution of the treated materials was homogeneous (25 wt % had dimensions <6.3 mm) and their moisture halved, as well as the electrical conductivity of the leachates. A significant decrease was observed in the leachates of the treated BA for sulphates (44%),
chlorides (26%), and PTEs (53% Cr, 60% Cu and 8% Mo). The statistical analysis revealed good correlations between chloride and sulphate concentrations in the leachates with Ba, Cu, Mo, and Sr, illustrating the consistent behavior of the major and minor components of the layer surrounding BA particles. In conclusion, the tested process could be considered as promising for the improvement of BA valorization.
Die Zementindustrie und weitere energieintensive Industrien wie etwa die Stahlindustrie stehen vor dem Hintergrund der Transformation unserer Gesellschaft zur Klimaneutralität vor erheblichen Herausforderungen. Ziel dieser Branchen ist perspektivisch die vollständige Vermeidung klimaschädlicher Emissionen – mit besonderem Fokus auf Kohlendioxid. Neben der Umstellung auf regenerative Energieträger, sind im Speziellen für die Zementindustrie die erheblichen Anteile an CO2-Emissionen durch die Entsäuerung von Kalkstein zukünftig zu vermeiden. Da die hervorragenden Bindemitteleigenschaften des bisher hauptsächlich in Zementen eingesetzten Portlandklinkers jedoch auf Calciumverbindungen wie Tri- und Di-calciumsilikaten basieren, stellt die Substitution des Kalks derzeit für die Zementindustrie die größte Herausforderung dar. Neben vollständig neuen Bindemittelsystemen ohne Verwendung von Kalk und CCS/CCU-Technologien zur Vermeidung der CO2-Emissionen bei Verwendung von Kalk, können Abfälle und Nebenprodukte wie etwa Betonbrechsand, verschiedene Schlacken und weitere Massenreststoffe sinnvoll zur Einsparung von Rohstoffen und zur Vermeidung von CO2-Emissionen eingesetzt werden. Es gilt diese Potentiale von Sekundärrohstoffen branchenübergreifend zu identifizieren und Synergien zwischen den Branchen nutzbar zu machen. Hierbei werden neben der chemischen Zusammensetzung der Abfälle und Nebenprodukte auch die Verfügbarkeit und der Massenstrom relevante Kriterien sein. Die potenziellen Sekundärrohstoffe und deren Gemische mit chemisch ähnlicher Zusammensetzung wie die bisher verwendeten Bindemittel, können durch verschiedene technische Ansätze wieder in reaktive Bindemittel umgewandelt und damit nutzbar gemacht werden. Eine gezielte Umwandlung der nicht reaktiven mineralischen Phasen in neue mineralische Phasen mit guten Bindemitteleigenschaften, kann u. a. durch Schmelzprozesse erzielt werden. In Schmelzen können bei hohen Temperaturen die bestehenden, nicht reaktiven mineralischen Phasen zerstört und neue mineralische Phasen mit guten Bindemitteleigenschaften erzeugt werden. Hohe Freiheitsgrade durch gezielte Einstellung der stofflichen Zusammensetzung der Schmelze, durch Stoffseparationen und durch geregelte Abkühlregimes können eine maßgeschneiderte Erzeugung neuer Bindemitteltypen ermöglichen. Aufgrund der hohen erforderlichen Temperaturen von Schmelzprozessen ist die Umsetzung dieser neuen Verfahren nach Möglichkeit in bestehenden pyrometallurgischen Produktionsrouten wie etwa der Stahlproduktion vorzunehmen. So kann etwa der Einsatz von Betonbrechsand als Schlackebildner in der Stahlproduktion zielführend sein, wenn die Schlacke wieder zu einem Bindemittel prozessiert wird und in Zementen Verwendung findet. Eine stoffliche Kreislaufführung wäre hiermit gegeben, wobei der Einsatz von Kalkstein als Schlackebildner oder Rohstoff für die Zementproduktion, und damit die entsprechenden CO2-Emissionen, vermieden werden. Die Entwicklung neuartiger Bindemittelsysteme auf Basis von Sekundärrohstoffen sollte von erforderlichen Anpassungen und neuen Entwicklungen in der Regelsetzung und Normung begleitet werden. Vor allem muss gewährleistet sein, dass die mit neuen Bindemitteln hergestellten Betone den hohen Anforderungen an Dauerhaftigkeit und Umweltverträglichkeit genügen. Des Weiteren sollte mit den etablierten Methoden, wie etwa der Lebenszyklusanalyse, untersucht werden, inwiefern und in welchem Umfang die neuen technischen Entwicklungen zu Nachhaltigkeit und Klimaschutz beitragen.
Die Zementindustrie und weitere energieintensive Industrien wie etwa die Stahlindustrie stehen vor dem Hintergrund der Transformation unserer Gesellschaft zur Klimaneutralität vor erheblichen Herausforderungen. Ziel dieser Branchen ist perspektivisch die vollständige Vermeidung klimaschädlicher Emissionen – mit besonderem Fokus auf Kohlendioxid. Neben der Umstellung auf regenerative Energieträger, sind im Speziellen für die Zementindustrie die erheblichen Anteile an CO2-Emissionen durch die Entsäuerung von Kalkstein zukünftig zu vermeiden. Da die hervorragenden Bindemitteleigenschaften des bisher hauptsächlich in Zementen eingesetzten Portlandklinkers jedoch auf Calciumverbindungen wie Tri- und Di-calciumsilikaten basieren, stellt die Substitution des Kalks derzeit für die Zementindustrie die größte Herausforderung dar. Neben vollständig neuen Bindemittelsystemen ohne Verwendung von Kalk und CCS/CCU-Technologien zur Vermeidung der CO2-Emissionen bei Verwendung von Kalk, können Abfälle und Nebenprodukte wie etwa Betonbrechsand, verschiedene Schlacken und weitere Massenreststoffe sinnvoll zur Einsparung von Rohstoffen und zur Vermeidung von CO2-Emissionen eingesetzt werden. Es gilt diese Potentiale von Sekundärrohstoffen branchenübergreifend zu identifizieren und Synergien zwischen den Branchen nutzbar zu machen. Hierbei werden neben der chemischen Zusammensetzung der Abfälle und Nebenprodukte auch die Verfügbarkeit und der Massenstrom relevante Kriterien sein. Die potenziellen Sekundärrohstoffe und deren Gemische mit chemisch ähnlicher Zusammensetzung wie die bisher verwendeten Bindemittel, können durch verschiedene technische Ansätze wieder in reaktive Bindemittel umgewandelt und damit nutzbar gemacht werden. Eine gezielte Umwandlung der nicht reaktiven mineralischen Phasen in neue mineralische Phasen mit guten Bindemitteleigenschaften, kann u. a. durch Schmelzprozesse erzielt werden. In Schmelzen können bei hohen Temperaturen die bestehenden, nicht reaktiven mineralischen Phasen zerstört und neue mineralische Phasen mit guten Bindemitteleigenschaften erzeugt werden. Hohe Freiheitsgrade durch gezielte Einstellung der stofflichen Zusammensetzung der Schmelze, durch Stoffseparationen und durch geregelte Abkühlregimes können eine maßgeschneiderte Erzeugung neuer Bindemitteltypen ermöglichen. Aufgrund der hohen erforderlichen Temperaturen von Schmelzprozessen ist die Umsetzung dieser neuen Verfahren nach Möglichkeit in bestehenden pyrometallurgischen Produktionsrouten wie etwa der Stahlproduktion vorzunehmen. So kann etwa der Einsatz von Betonbrechsand als Schlackebildner in der Stahlproduktion zielführend sein, wenn die Schlacke wieder zu einem Bindemittel prozessiert wird und in Zementen Verwendung findet. Eine stoffliche Kreislaufführung wäre hiermit gegeben, wobei der Einsatz von Kalkstein als Schlackebildner oder Rohstoff für die Zementproduktion, und damit die entsprechenden CO2-Emissionen, vermieden werden. Die Entwicklung neuartiger Bindemittelsysteme auf Basis von Sekundärrohstoffen sollte von erforderlichen Anpassungen und neuen Entwicklungen in der Regelsetzung und Normung begleitet werden. Vor allem muss gewährleistet sein, dass die mit neuen Bindemitteln hergestellten Betone den hohen Anforderungen an Dauerhaftigkeit und Umweltverträglichkeit genügen. Des Weiteren sollte mit den etablierten Methoden, wie etwa der Lebenszyklusanalyse, untersucht werden, inwiefern und in welchem Umfang die neuen technischen Entwicklungen zu Nachhaltigkeit und Klimaschutz beitragen.
extraWERT Forschungsvorhaben
(2022)
Die novellierte AbfKlärV (2017) beinhaltet die Verpflichtung zum P-Recycling ab einem P-Gehalt im Klärschlamm von 20 g/kg. Im Vortrag werden Ergebnisse des Forschungsvorhabens extraWERT zu diesem Themenkomplex vorgestellt. Es werden Untersuchungen zu P-Gehalten deutscher Klärschlämme und zu den zulässigen Analysemethoden dafür vorgestellt.
Die Zementindustrie erzeugt etwa 6-7% der globalen CO2-Emissionen und steht damit als Industriezweig vor dem Hintergrund einer anvisierten Klimaneutralität vor gewaltigen Herausforderungen. Der Prozess der Klinkerherstellung wurde über die vergangenen Jahrzehnte bereits kontinuierlich optimiert. Seit 1990 ist es der deutschen Zementindustrie gelungen, die spezifischen CO2-Emissionen der Zementproduktion u. a. durch den Einsatz alternativer, nicht fossiler Brennstoffe und durch Absenkung des Klinkergehalts im Zement um 20 % zu senken. Weitere konventionelle Minderungsstrategien versprechen jedoch nur noch wenig zusätzliche Reduktion. Im Falle des Portlandklinkers besteht die Schwierigkeit darin, dass zwei Drittel der CO2-Emissionen rohstoffbedingt durch die Entsäuerung des Kalksteins (CaCO3) anfallen, die durch die beschriebenen Maßnahmen nicht weiter abgesenkt werden können. Vielmehr wird es erforderlich sein, noch zu entwickelnde oder zu optimierende Technologien anzuwenden und ggf. alle relevanten Ebenen wie Produktion, Weiterverarbeitung und Anwendung von Zement und Beton neu zu denken. Neben technologischen Ansätzen zur CO2-Abscheidung mit nachfolgender langfristiger Speicherung (Carbon Capture and Storage – CCS) oder Verwertung (Carbon Capture and Utilisation – CCU) werden auch alternative Rohstoffe für die Zementproduktion und alternative Bindemittel in Betracht zu ziehen sein.
The bipartite interactions between insect hosts and their bacterial gut microbiota, or their bacterial pathogens, are empirically and theoretically well-explored. However, direct, and indirect tripartite interactions will also likely occur inside a host. These interactions will almost certainly affect the trajectory of pathogen virulence evolution, an area that is currently under researched. The interactions within tripartite associations can be competitive, that is, exploitative-competition, interference-competition or apparent-competition. Competitive interactions will be significantly influenced by non-competitive effects, for example, immunopathology, immunosuppression, and microbiota-mediated tolerance. Considering a combination of these interactions and effects, will enable an increased understanding of the evolution of pathogen virulence. This new perspective allows us to identify several novel research questions, which we hope will be a useful framework for future research.
Die Autoren zeigen dazu die gesetzlichen und energiepolitischen Rahmenbedingungen und Perspektiven auf, widmen sich in aktuellen Beiträgen zur Verfahrenstechnik der thermischen Abfallbehandlung sowohl den thermischen Hauptverfahren als auch der Abgasreinigung und gehen auf das Thema Wertstoffrückgewinnung ein. Ihr Fazit: Durch Anstrengungen, das stoffliche Recycling weiter zu optimieren, können künftig weitere Kreisläufe von Produkten und Materialien hochwertig geschlossen werden. Für manche Abfallströme wird dies aber aus verschiedenen Gründen nicht möglich sein – hier bleibt die thermische Abfallbehandlung unverzichtbar.
In an interdisciplinary collaboration, restorers, art historians, and scientists examined Guilio Romano’s The Madonna with the Wash-Basin of 1525 (Dresden State Art Collections). Insights into the painting technique along with art historical comparisons provided the opportunity for a better understanding of the painting’s genesis, in particular concerning an early reworking of the background by the artist. A recovery and reconstruction of the earlier version of the background is now possible. The discovery of zinc in distinct passages of the painting, as well as the grey-black pigment stibnite and glass particles used as a supplement in paint layers are of special interest. The technological investigation initiated a discussion about the circumstances of the revision, as well as the painting’s relation to Vasari’s Lives of Artists.
Hundreds of papyrus rolls, carbonized during the 79CE eruption of Mount Vesuvius, were discovered in 1754 at Herculaneum. Sophisticated mechanical methods for unrolling the best-preserved scrolls have been applied, with varying success. However, such processes have been abandoned, to prevent risk from irremediable damage or loss and to preserve the integrity of the extremely fragile rolls. Following the development of X-ray based non-invasive techniques, attempts to virtually unroll the scrolls were made. The most common ink in Antiquity was carbon-based, and the main element of carbonized papyrus is carbon, making these investigations difficult. However, some attempts with synchrotron X-ray phase-contrast tomography (XPCT) were successful. Recently, the identification of antique inks containing metals raised hope that if some of the inks contain metal the rolls can be virtually unrolled using conventional CT- technique. We investigated the inks of a selection of partially unrolled fragments stored at the Biblioteca Nazionale di Napoli with X-ray fluorescence in order to select the best candidates for tomography. Despite the many difficulties (analysis of several layers sticking together, letters barely visible, difficulty to separate contribution from the ink and from the papyrus, inhomogeneity of the support, fragility of the fragments…), encouraging results were found, with a number of inks from Greek fragments found to contain additions to the soot (Fe, Pb, Cu P).
Hundreds of papyrus rolls, carbonized during the 79CE eruption of Mount Vesuvius, were discovered in 1754 at Herculaneum. Sophisticated mechanical methods for unrolling the best-preserved scrolls have been applied, with varying success. However, such processes have been abandoned, to prevent risk from irremediable damage or loss and to preserve the integrity of the extremely fragile rolls. Following the development of X-ray based non-invasive techniques, attempts to virtually unroll the scrolls were made. The most common ink in Antiquity was carbon-based, and the main element of carbonized papyrus is carbon, making these investigations difficult. However, some attempts with synchrotron X-ray phase-contrast tomography (XPCT) were successful. Recently, the identification of antique inks containing metals raised hope that if some of the inks contain metal the rolls can be virtually unrolled using conventional CT- technique. We investigated the inks of a selection of partially unrolled fragments stored at the Biblioteca Nazionale di Napoli with X-ray fluorescence in order to select the best candidates for tomography. Despite the many difficulties (analysis of several layers sticking together, letters barely visible, difficulty to separate contribution from the ink and from the papyrus, inhomogeneity of the support, fragility of the fragments…), encouraging results were found, with a number of inks from Greek fragments found to contain additions to the soot (Fe, Pb, Cu P).
The processing of laser-induced periodic surface structures (LIPSS) represents a simple and robust way for the nanostructuring of solids that allows creating a wide range of surface functionalities featuring applications in optics, tribology, medicine, energy technologies, etc. While the currently available laser and scanner technology already allows surface processing rates at the m2/min level, industrial applications of LIPSS are sometimes hampered by the complex interplay between the nanoscale surface topography and the specific surface chemistry. This typically manifests in difficulties to control the processing of LIPSS and in limitations to ensure the long-term stability of the created surface functions. This presentation aims to identify some unsolved scientific problems related to LIPSS, discusses the pending technological limitations, and sketches the current state of theoretical modelling. Hereby, it is intended to stimulate further research and developments in the field of LIPSS for overcoming these limitations and for supporting the transfer of the LIPSS technology into industry.
One criterion to evaluate the odour of a sample is perceived
intensity П which is evaluated with the aid of a comparative scale. The procedure is well accepted but also time consuming and extensive. The study should help simplify the testing procedure by asking the panel members to only indicate whether a sample is perceived as less to equally intense or of greater intensity in comparison to a given acetone concentration of 7 pi on the comparative scale. In Germany a value of 7 pi is required for products to be suitable for the indoor use. The results show that the simplified test is basically suitable.
Healthy and energy efficient buildings must be free from disturbing odours. Odour emissions from building materials can be measured with the well-known and accepted standard ISO 16000-28 “Indoor air – Part 28: Determination of odour emissions from building products using test chambers”. For commonly used emission test chambers the sample air is collected in containers (bags) and presented to a group of panel members for the purpose of evaluating the odour. A standard sets requirements for the on-demand presentation in detail. These include the validation procedure for container materials, pre-treatment of bags, details on storage of filled bags and how to carry out the measurements. However, although these measures are proven in practice, incorrect measurements are still possible. Also errors can occur due to a very complex measurement procedure. So, there is a great need for research into how the odour samples are presented.
The proposal planned to be presented will introduce a new development in sample provision by using an adapter which enables collection and provision of sample air without storage or transport of bags. The adapter is a sample container which is permanently positioned on the emission test chamber´s outlet and continuously filled with sample air flowing through it. The flow is briefly interrupted at the time when a sample is taken by a panel member for the test.
The size of the container is sufficient to provide enough sample air for evaluation by at least one panel member via a funnel. Since sampling and presentation are technically connected, it means you can almost do away with storage or transportation and thus it can be presented almost unchanged to the panelmembers. The aim is to reduce measurement errors in the odour samples provision process and the improvement of measurement reproducibility. The paper presents the construction of the adapter as well as the results of emission and odour tests carried out so far.
Zur Weiterentwicklung der Probenpräsentation wurde ein Adapter entwickelt, der Emissionsprüfkammer und Bewertungstrichter miteinander verbindet und dadurch eine der direkten Messung vergleichbare Geruchsbewertung ermöglicht. Die analytischen Messungen zeigen, dass es kaum Unterschiede in der Zusammensetzung der Probenluft in der Kammer im Vergleich zum Probenbehälter gibt. Bei den olfaktorischen Messungen kam es jedoch bei der Bewertung der Probenluft mit Hilfe des Adapters zu Minderbefunden. Anschließende Untersuchungen zeigten, dass beim Ausschalten des Geräts Umgebungsluft über den Trichter in den Adapter strömt und zu einer Verdünnung der Probenluft führt. Um dies zu vermeiden, werden derzeit weitere Messungen durchgeführt.
Eine weitere Versuchsreihe wurde durchgeführt, um den Messaufwand bei der Bewertung der empfundenen Intensität zu reduzieren. Die entwickelte „größer-oder-kleiner/gleich“ Abfrage kann hier hilfreich sein. Die Untersuchungen im Luftqualitätslabor und im Rahmen eines Ringversuches mit verschiedenen Laboren, zeigen, dass die Abfrage in fast allen Fällen zu den gleichen Ergebnissen führt, wie die normgerechte aber aufwendigere Ermittlung der empfundenen Intensität mithilfe des Vergleichsmaßstabes.
Data for the publication "The role of extracellular polymeric substances of fungal biofilms in mineral attachment and weathering" (https://doi.org/10.1038/s41529-022-00253-1). It includes:
- The Summary of the EPS concentration, EPS sugar components and EPS linkages.
- The Summary of the XPS analysis of freeze-dried biofilm samples of all strains.
- The Summary of the pH, Mg, SI and Fe concentration, biomass and olivine dissolution rate for each time point of all dissolution experiments.
The roles extracellular polymeric substances (EPS) play in mineral attachment and weathering were studied using genetically modified biofilms of the rock-inhabiting fungus Knufia petricola strain A95. Mutants deficient in melanin and/or carotenoid synthesis were grown as air-exposed biofilms. Extracted EPS were quantified and characterised using a combination of analytical techniques. The absence of melanin affected the quantity and composition of the produced EPS: mutants no longer able to form melanin synthesised more EPS containing fewer pullulan-related glycosidic linkages. Moreover, the melanin-producing strains attached more strongly to the mineral olivine and dissolved it at a higher rate. We hypothesise that the pullulan-related linkages, with their known adhesion functionality, enable fungal attachment and weathering. The released phenolic intermediates of melanin synthesis in the Δsdh1 mutant might play a role similar to Fe-chelating siderophores, driving olivine dissolution even further. These data demonstrate the need for careful compositional and quantitative analyses of biofilm-created microenvironments.