4 Material und Umwelt
Filtern
Dokumenttyp
- Zeitschriftenartikel (299)
- Vortrag (280)
- Posterpräsentation (138)
- Beitrag zu einem Tagungsband (43)
- Buchkapitel (23)
- Dissertation (6)
- Sonstiges (6)
- Beitrag zu einem Sammelband (5)
- Forschungsbericht (4)
- Forschungsdatensatz (3)
Sprache
- Englisch (813) (entfernen)
Schlagworte
- Biocides (50)
- Antimicrobial resistance (34)
- Corrosion (25)
- Bacteria (24)
- Biofilms (24)
- Ink (24)
- Leaching (23)
- Biofilm (19)
- MIC (19)
- Archaeometry (17)
- Nano (17)
- Sewage sludge (17)
- VOC (17)
- Evolution (15)
- Phosphorus (15)
- XRF (15)
- Bottom ash (14)
- Methanogens (14)
- OECD (14)
- Phosphorus recovery (14)
- Recycling (14)
- Fungus (13)
- Microbiologically influenced corrosion (13)
- PFAS (13)
- Per- and Polyfluoroalkyl substances (PFAS) (13)
- Raman spectroscopy (13)
- Inks (12)
- Black fungi (11)
- Construction products (11)
- Disinfection (11)
- E. coli (11)
- Manuscripts (11)
- NAP-XPS (11)
- XANES spectroscopy (11)
- Antimicrobial coating (10)
- Biocide (10)
- Reverse glass painting (10)
- Soil (10)
- Archaea (9)
- Cascade impactor (9)
- DRIFTS (9)
- Genetics (9)
- Knufia petricola (9)
- Manuscript (9)
- Microbiology (9)
- Persistence (9)
- Resistance (9)
- Standardization (9)
- Termite (9)
- Wastewater (9)
- Aerosol (8)
- Circular economy (8)
- Ectoine (8)
- Fertilizer (8)
- Fungi (8)
- Geosynthetics (8)
- Indoor air quality (8)
- Non-destructive testing (8)
- Non-invasive analysis (8)
- TXRF (8)
- Volatile organic compounds (8)
- X-ray absorption near-edge structure (XANES) spectroscopy (8)
- Combustion ion chromatography (7)
- Coptic (7)
- Ecotoxicity (7)
- Horizontal gene transfer HGT (7)
- Laser-induced periodic surface structures (LIPSS) (7)
- Melanin (7)
- Nanomaterial (7)
- Papyrus (7)
- Reference material (7)
- Resistance evolution (7)
- Risk assessment (7)
- Termites (7)
- Tolerance (7)
- Weathering (7)
- Antibiotics (6)
- BOFS (6)
- Bacterial adhesion (6)
- Biocide tolerance (6)
- Cultural heritage (6)
- DHN melanin (6)
- Dead Sea Scrolls (6)
- Emission (6)
- Fertilzer (6)
- Glutaraldehyde (6)
- Horizontal gene transfer (6)
- Hydraulic reactivity (6)
- ISO 16000-6 (6)
- Pathogen (6)
- Pigment (6)
- Remediation (6)
- Scandium (6)
- Thermal desorption (6)
- Wood protection (6)
- Alginate (5)
- Antimony (5)
- Bio-weathering (5)
- Biofilm formation (5)
- Cross-resistance (5)
- Degradation (5)
- Emission test chamber (5)
- Environmental Simulation (5)
- Gas chromatography (5)
- Ground water (5)
- Heterogeneity (5)
- Immunity (5)
- Ink analyses (5)
- Iron-gall ink (5)
- Korrosion (5)
- Methanogen (5)
- Microcolonial fungi (5)
- Mutation rate (5)
- Nanomaterials (5)
- Nanoparticle (5)
- Olivine (5)
- Parchment (5)
- Pigments (5)
- Portland Cement (5)
- Prüfrichtlinie (5)
- Pyrometallurgy (5)
- Reflectography (5)
- Sc-ICP-ToF-MS (5)
- Sewage sludge ash (5)
- Single cell analysis (5)
- Spectroscopy (5)
- Standardisation (5)
- Test guideline (5)
- Ultrafine particles (5)
- XANES (5)
- XPS (5)
- Zinc (5)
- ATR (4)
- Air quality monitoring (4)
- Alite (4)
- Analytical method (4)
- Anobium punctatum (4)
- Antimicrobial surfaces (4)
- Antimicrobials (4)
- Biocorrosion (4)
- Carbon steel (4)
- Corrosion products (4)
- Diffusive gradients in thin films (DGT) (4)
- EN 16516 (4)
- Electric arc furnace dust (4)
- Emission reference materials (4)
- Environmental evaluation (4)
- Geotextiles (4)
- Guideline (4)
- Gypsum (4)
- Humboldt Codices (4)
- ICP-MS (4)
- Incineration bottom ash (4)
- Ink analysis (4)
- Light (4)
- Lysimeter (4)
- Method development (4)
- Middle Ages (4)
- NanoSIMS (4)
- Nanoparticles (4)
- Nitrogen (4)
- Particles (4)
- Passive sampling (4)
- Polyethylene (4)
- Polyglycerol (4)
- Raman Spectroscopy (4)
- Red Mud (4)
- Reference materials (4)
- Round robin test (4)
- Steelmaking slag (4)
- Tantalum (4)
- Thermal treatment (4)
- Tineola bisselliella (4)
- Transformation (4)
- UFP (4)
- VVOCs (4)
- Virus (4)
- 3D printing (3)
- Affinity chromatography (3)
- Antibodies (3)
- Antimicrobial (3)
- Architecture (3)
- BEMMA (3)
- Bauxite Residue (3)
- Biodeterioration (3)
- Bioinformatics (3)
- Black fungus (3)
- Blast furnace sludge (3)
- Cairo Genizah (3)
- Carbon Fibers (3)
- Carbon steel corrosion (3)
- Chamber test (3)
- Chemical analysis (3)
- Chemical durability (3)
- Combustion Ion Chromatography (3)
- Combustion ion chromatography (CIC) (3)
- DNA (3)
- Design of experiments (3)
- Diffusive Gradients in thin films (DGT) (3)
- Diffusive gradients in thin-films (DGT) (3)
- Drawings (3)
- ESEM (3)
- Electron microscopy (3)
- Element mass concentration (3)
- Emerging (3)
- Emission reference material (3)
- Emissions (3)
- Environmental simulation (3)
- Extracellular polymeric substances (3)
- Extractable organically bound fluorine (EOF) (3)
- Extremotolerance (3)
- FFF-3D-Printer (3)
- FIB/SEM (3)
- Flow Model (3)
- Fluorescence (3)
- Genomics (3)
- Groundwater (3)
- Gut microbiota (3)
- HP14 (3)
- Halomonas elongata (3)
- Herculaneum (3)
- High resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) (3)
- Immune gene family (3)
- In-situ analysis (3)
- Interlaboratory comparison (3)
- Ir DNA staining approach (3)
- LIPSS (3)
- Laser processing (3)
- Manuscript studies (3)
- Material science (3)
- Materials emissions test (3)
- Mechanochemical treatment (3)
- Metabolism (3)
- Methanogen-induced microbiologically influenced corrosion (3)
- Microbiological influenced corrosion MIC (3)
- Microplastics (3)
- Mixed ink (3)
- Modelling (3)
- Modelling studies (3)
- Non destructive analytical techniques (3)
- Non-destructiv testing (3)
- Odour (3)
- Osmoadaptation (3)
- Particle size distribution (3)
- Perceived Intensity (3)
- Persian manuscripts (3)
- Phenotypic diversity (3)
- Phosphorus fertilizer (3)
- Quality assurance (3)
- Raman (3)
- Recovery (3)
- Recycling fertilizer (3)
- Recycling materials (3)
- Renewable Energy, Sustainability and the Environment (3)
- Rock-inhabiting fungus (3)
- SC-ICP-ToF-MS (3)
- Secondary building materials (3)
- Selective chlorination (3)
- Single cell (3)
- Size (3)
- Social (3)
- Stress tolerance (3)
- Struvite (3)
- Sulfate reducing bacteria (3)
- Symbiosis (3)
- UV radiation (3)
- VOC-emission (3)
- VVOC (3)
- Virulence (3)
- Waste management (3)
- Waste treatment (3)
- Wood Protection (3)
- X-ray diffraction (3)
- XRF analysis (3)
- 3D inspection (2)
- Additive Manufacturing (2)
- Additive Manufacturing (AM) (2)
- Adipokinetic hormone (2)
- Adipokinetic hormone receptor (2)
- Adsorbable organically bound fluorine (AOF) (2)
- Aerosol measurements (2)
- Agronomic performance (2)
- Air exchange rate (2)
- Air pollution (2)
- Air sampling (2)
- Aluminium (2)
- Ambient aerosols (2)
- Ammonium (2)
- Analytical methods (2)
- Anoxia (2)
- Antagonism (2)
- Antibiotic resisitance (2)
- Antiquity (2)
- Apanteles carpatus (2)
- Arabic Recipes (2)
- Artificial ageing (2)
- AshDec (2)
- Astrobiology (2)
- Atomic and Molecular Physics and Optics (2)
- Bacterial adhesion tests (2)
- Bacterial attachment (2)
- Bagasse (2)
- Baryscapus tineivorus (2)
- Bassanite (2)
- Bauprodukte (2)
- Bee (2)
- Biodiversity (2)
- Biofilm growth (2)
- Biofouling (2)
- Biogenic weathering (2)
- Biological pest control (2)
- Bioreceptivity (2)
- Biosynthesis (2)
- Biotechnology (2)
- Blattodea (2)
- Botrytis cinerea (2)
- Brown-rot fungi (2)
- Building and Construction (2)
- CDW processing (2)
- CFK (2)
- CO2 assisted impregnation (2)
- CRISPR/Cas9 (2)
- CSMC (2)
- Cabonfasern (2)
- Calcium alkali phosphate (2)
- Calcium silicate (2)
- Calcium sulfate (2)
- Cannibalism (2)
- Capsules (2)
- Carbide formation (2)
- Carbon feeding (2)
- Carbon ink (2)
- Chemical characterization (2)
- Chinese paper (2)
- Chromium (2)
- Circular Economy (2)
- Clinker substitute (2)
- Coastal protection (2)
- Cockroach (2)
- Colourants (2)
- Compatible solute (2)
- Comsumer good samples (2)
- Concrete (2)
- Condensed Matter Physics (2)
- Conservation (2)
- Consumer products (2)
- Contamination (2)
- Corynetes caeruleus (2)
- Crystallization (2)
- DGT (2)
- Density separation (2)
- Deponie (2)
- Desinfectant (2)
- Diffusive sampling (2)
- Disease (2)
- Disinfectants (2)
- Dry treatment (2)
- Dyes (2)
- E.coli (2)
- Electric Arc Furnace (2)
- Elektroofenstaub (2)
- Emission chamber (2)
- Emission testing (2)
- Emissionen (2)
- Energy Engineering and Power Technology (2)
- Entomopathogen (2)
- Environment (2)
- Environmental condition (2)
- European standard (2)
- Eusociality (2)
- FEM model (2)
- Flow system (2)
- Fluoride (2)
- Formaldehyde (2)
- Forsterite (2)
- Fuel Technology (2)
- Fume (2)
- Fungal biofilms (2)
- Genetic engineering (2)
- Genome sequence (2)
- Geogitter (2)
- Geokunststoffe (2)
- Geruch (2)
- Gichtgasschlamm (2)
- Glass (2)
- Glass scanning (2)
- Group defence (2)
- Gypsum recycling (2)
- HAXPES (2)
- Halomonas CRISPR Ectoine (2)
- Halophile (2)
- Heavy metal removal (2)
- Hi-Tension (2)
- Hydrogen (2)
- In situ (2)
- Infrared spectroscopy (2)
- Ink composition (2)
- Inkwells (2)
- Insect biotechnology (2)
- Interdisciplinary (2)
- Interdisciplinary approach (2)
- Iron (2)
- Iron oxide nanoparticles (2)
- Isoptera (2)
- Keratin (2)
- Knufia (2)
- Korynetes caeruleus (2)
- Lapis lazuli (2)
- Laser Powder Bed Fusion (L-PBF) (2)
- Laser-induced breakdown spectroscopy (2)
- Leaching control mechanisms (2)
- Leaching of waste materials (2)
- Leaching tests (2)
- Leather (2)
- Life history data (2)
- Loading factor (2)
- Low melting (2)
- MOF (2)
- MSWI bottom ash (2)
- Magnesium (2)
- Marble (2)
- Marine littering (2)
- Material emissions (2)
- Mechanochemistry (2)
- Melting experiments (2)
- Metabolomics (2)
- Micro plastic (2)
- Micro-XRF (2)
- Microbial (2)
- Microbiologically influenced corrosion (MIC) (2)
- Microbiome (2)
- Microbiota (2)
- Microorganism (2)
- Micropatterning (2)
- Microplastic (2)
- Mikrobiell beeinflusste Korrosion (2)
- Model (2)
- Museum (2)
- Museum Pests (2)
- Nano particle (2)
- Nanopartikel (2)
- Neuropeptide (2)
- Nitrification inhibitor (2)
- Non invasive analysis (2)
- Nosema ceranae (2)
- Nutrient (2)
- Optics (2)
- Osmia bicornis (2)
- PGAA (2)
- PIXE (2)
- Particle gas emission (2)
- Particle size (2)
- Particle size distributuion (2)
- Particulate emission (2)
- Per- and polyfluorinated alkyl substances (PFASs) (2)
- Per- and polyfluoroalkyl substances (PFAS) (2)
- Perceived intensity (2)
- Permeable reactive barriers (2)
- Persister cells (2)
- Phopshorus recovery (2)
- Pigment analyses (2)
- Pigment identification (2)
- Plant pathogen (2)
- Plume (2)
- Pollutant (2)
- Pollutants (2)
- Provenance studies (2)
- Pseudomonas aeruginosa (2)
- Purification (2)
- Reactive oxygen species (2)
- Recycling fertiliser (2)
- Recycling fertilisers (2)
- Reduction process (2)
- Reductive amination (2)
- Reference method (2)
- Rembrandt (2)
- Ressourcenrückgewinnung (2)
- Restoration and conservation (2)
- Risk assesment (2)
- Robustness studies (2)
- Sapphire (2)
- Scattering (2)
- Sewage sludge ordinance (2)
- Shale (2)
- Size distribution (2)
- Size resolved chemical composition (2)
- Social immunity (2)
- Soil P species (2)
- Soil-like material (2)
- Solar panel (2)
- Solubility (2)
- Sorption (2)
- Spatter (2)
- Stained glass (2)
- Steelmaking (2)
- Stress (2)
- Structured light scanning (2)
- Subaerial biofilm (2)
- Subaerial biofilms (2)
- Substance release (2)
- Sustainability (2)
- Synchrotron (2)
- Synthetic organic pigments (2)
- Termite phylogeny (2)
- Test Guideline (2)
- Testguideline (2)
- Thermal extraction (2)
- Thermochemical treatment (2)
- Time resolved chemical composition (2)
- Total reflection X-ray spectroscopy (2)
- Transcriptomics (2)
- Tricalcium-silicate (2)
- UV-irradiation (2)
- Vanadium (2)
- Virology (2)
- Waste-to-energy (2)
- Wild bees (2)
- Wooden toys (2)
- Writing inks (2)
- X-Ray fluorescence analyses (2)
- X-ray adsorption near-edge structure (XANES) spectroscopy (2)
- Zink (2)
- genetics (2)
- melanin (2)
- (Semi)arid to humid-temperate natural ecosys (1)
- 13CO2 pulse labeling (1)
- 13th century (1)
- 16S rRNA gene (1)
- 2A peptide (1)
- 2D nanomaterials (1)
- 3D Printing (1)
- 3D printer (1)
- A Greek palimpsest (1)
- A key interface (1)
- A-DNA conformation (1)
- AEROMET II (1)
- AEROMET project (1)
- AMR (1)
- ASAP-MS (1)
- ATR-FTIR (1)
- Academia (1)
- Accelerated aging (1)
- Accuracy (1)
- Acidobacteria (1)
- Adaptation (1)
- Adaption (1)
- Additive manufacturing (1)
- Advanced groups of termites (1)
- Aerodynamic levitation (1)
- Aerosol element alanysis (1)
- Aerosol element mass concentration (1)
- Aerosol gravimetry (1)
- Aerosol measurement instruments (1)
- Aerosol spectroscopy (1)
- Aerosols (1)
- Aerosolsensor (1)
- Affinity extraction (1)
- Affinity support (1)
- Ag-LDI-MS (1)
- AgBB Bewertung (1)
- Agarose (1)
- Ageing (1)
- Aging (1)
- Aging test (1)
- Aging tests (1)
- Agricultural mycology (1)
- Air analysis (1)
- Air pollution control (1)
- Air quality (1)
- Airborne Particles (1)
- Alexander von Humboldt (1)
- Alite hydraulic reactivity (1)
- Alkali zinc borate glass (1)
- Alkylating agents (1)
- Aluminum (1)
- Aluminum oxide (1)
- Ambient aerosol (1)
- Ambient air (1)
- Ambient air pollution (1)
- Amino acid analysis (1)
- Amphiphilic polymer (1)
- Amplicon sequencing (1)
- Anaerobic pathways (1)
- Analytical Chemistry (1)
- Analytical chemistry (1)
- Analytical screening techniques (1)
- Analytical standards (1)
- Ancient INKS (1)
- Ancient document production (1)
- Animal immune system (1)
- Anodization (1)
- Anti-microbial effects (1)
- Antiadhesive surfaces (1)
- Antibacterial (1)
- Antibacterial coatings (1)
- Antibacterial polymer (1)
- Antibacterial surfaces (1)
- Antibiotic (1)
- Antibiotic resistance (1)
- Antibody purification (1)
- Antifouling (1)
- Antimicrobial Resistance (1)
- Antimicrobial materials (1)
- Antimicrobial resistances (1)
- Antimicrobial test (1)
- Antimicrobial testing (1)
- Antimony black (stibnite) (1)
- Antiseptic agents (1)
- Aquatic fungi (1)
- Aqueous synthesis (1)
- Arabic recipes (1)
- Arbuscular mycorrhiza (1)
- Archaeological provenance (1)
- Archaeometric studies (1)
- Aromatic amino acid analysis AAAA (1)
- Aromatic amino acid analysis aaaa (1)
- Artificial weathering (1)
- Ascomycetes (1)
- Ascosphaera apis (1)
- Ashdec (1)
- Aspergillus (1)
- Aspergillus flavus (1)
- Assessment (1)
- Atomic force microscopy (1)
- Autoclave tests (1)
- Automated analysis (1)
- BESSY (1)
- BFR (1)
- BODIPY (1)
- BODIPY dye (1)
- BSA (1)
- BTEX (1)
- Bacillus subtilis (1)
- Bacteria repellent surfaces (1)
- Bacteria-repellent surfaces (1)
- Bacterial cell cycle (1)
- Bacterial growth (1)
- Bacterial infection (1)
- Bacterial second messenger (1)
- Baltic Sea (1)
- Bankia sp (1)
- Basidiomycetes (1)
- Basin (1)
- Batch tests (1)
- Bathyarchaeia (1)
- Bauxite residue (1)
- Bawit (1)
- Bee diseases (1)
- Bee health (1)
- Bees (1)
- Behavioural mechanisms (1)
- Beneficial microbes (1)
- Beschichtung (1)
- Beständigkeit (1)
- Bimolecular fluorescence complementation (1)
- Bio-based insulation (1)
- Bio-receptive (1)
- Bioactive glass (1)
- Bioavailability (1)
- Bioceramics (1)
- Biocides in the environment (1)
- Bioconjugation (1)
- Biodegradation (1)
- Biodeterioration and biodegradation (1)
- Biofilm quantification (1)
- Bioilm (1)
- Bioinformatics virology viruses software (1)
- Biokorrosion (1)
- Biological Control (1)
- Biological control (1)
- Biologically induced mineral weathering (1)
- Biomimetic (1)
- Bioseparation (1)
- Biosphere (1)
- Biosphere-technosphere interaction (1)
- Biotests (1)
- Biotic environment (1)
- Biphasic growth (1)
- Black Ink (1)
- Black microcolonial fungi (1)
- Black writing ink (1)
- Blast-furnace sludge (1)
- Blue Angel ecolabel (1)
- Bodenbelag (1)
- Book production (1)
- Botrytis (1)
- Bovine serum albumin (1)
- Building Material (1)
- Building material (1)
- Building materials (1)
- Building product (1)
- Building products (1)
- Built environment (1)
- Bushveld Complex (1)
- Byzantine manuscript (1)
- C-di-GMP (1)
- CCQM (1)
- CEC-L-103 (1)
- CFRP (1)
- CHC (1)
- CIC (1)
- COST Action (1)
- COST action CA15114 AMICI (1)
- COVID (1)
- CPC calibration (1)
- CRISPR dCas9 (1)
- CRISPR/ Cas9-mediated genome editing (1)
- CRM (1)
- CaNaPO4 (1)
- Calcareous deposits (1)
- Calcium carbonate (1)
- Calibration (1)
- Calibration transfer (1)
- Carbon Fibre (1)
- Carolingian (1)
- Carotenoids (1)
- Carrier (1)
- Cascade impector (1)
- Cast iron (1)
- Cathodic protection (1)
- Cell appendages (1)
- Cell factory (1)
- Cell studies (1)
- Cell-envelope (1)
- Cellulose ether (1)
- Cellulose synthase (1)
- Cerium oxide (1)
- Chamber measurement (1)
- Chamber-test (1)
- Characterisation (1)
- Characterization (1)
- Chemical composition (1)
- Chemical ecology (1)
- Chemical extraction (1)
- Chemical extraction methods (1)
- Chemical recycling (1)
- Chemicals (1)
- Chicken manure (1)
- Chicken manure ash (1)
- Chilean Coastal Cordillera (1)
- Chinese Paper (1)
- Chlorination (1)
- Chlorine (1)
- Chromitites (1)
- Clean steel (1)
- Cleridae (1)
- Climate gradient (1)
- Climate responsive materials (1)
- Cloning vectors (1)
- Close proximity to colonies (1)
- Co-combustion (1)
- Cobalt (1)
- Cockroaches (1)
- Codex (1)
- Codex Miscellaneus (1)
- Codicology (1)
- Cognitive performance (1)
- Coleoptera (1)
- Colorants (1)
- Colored glasses (1)
- Colouring (1)
- Combustion and gasification (1)
- Community composition (1)
- Community-level interactions (1)
- Comparison (1)
- Concept (1)
- Conditioning layer (1)
- Confocal microscopy (1)
- Coniophora puteana (1)
- Conjugate (1)
- Conjugation (1)
- Constantinomyces (1)
- Construction Products (1)
- Construction and demolition waste (1)
- Construction materials (1)
- Construction product (1)
- Construction products regulation (CPR) (1)
- Consumer article (1)
- Consumer articles (1)
- Contaminant transfer (1)
- Contraction (1)
- Control (1)
- Controllable gene expression (1)
- Controlled atmosphere (1)
- Controlled release fertilisers (1)
- Copper (1)
- Copper-based wood preservatives (1)
- Coptic manuscripts (1)
- Coptic papyri (1)
- Coptic studies (1)
- Coptotermes (1)
- Core microbiome (1)
- Core/shell nanoparticle (1)
- Corona (1)
- Corrosion product (1)
- Corundum (1)
- Cribellate spiders (1)
- Crispr-Cas9 (1)
- Crispr/Cas9 (1)
- Critical raw materials (1)
- Cross-feeding (1)
- Cross-sectioning (1)
- Cryo XPS (1)
- Cryptoendolithic black fungus (1)
- Cryptoendolithism (1)
- Crystalline phase identification (1)
- CuNPs (1)
- Cubical shape (1)
- Cultural Entomology (1)
- Cultural Heritage (1)
- Culuative energy demand (1)
- Cupriavidus campinensis (1)
- Cuticular hydrocarbons (1)
- Cyanobacteria (1)
- DNA barcode (1)
- DNA polymerase (1)
- DSLT (1)
- DSM 5009 (1)
- Damage repair (1)
- De novo assembly (1)
- Decomposition point (1)
- Degradable polymer (1)
- Dendrimer (1)
- Denitrification (1)
- Deponiebau (1)
- Desert ecology (1)
- Desiccation (1)
- Deterioration (1)
- Developing building materials (1)
- Development (1)
- Dielectric heating (1)
- Dietary adaptation (1)
- Differential expression (1)
- Differential gene expression analysis (1)
- Diffractive gratings (1)
- Diffusive Gradients in Thin-films (DGT) (1)
- Digitalisation (1)
- Direct laser writing (1)
- Direct material input (1)
- Disinfection Fuel (1)
- Dispay case (1)
- Dispersion of carbon pigments (1)
- Display case (1)
- Disposal (1)
- Diversity (1)
- Dothideomycetes (1)
- Downstream processing (1)
- Draft Genome (1)
- Drawing (1)
- Driving rain (1)
- Drywood termite (1)
- DsRNA (1)
- Durability (1)
- Dye (1)
- Dyes and pigments (1)
- Dynamic calibration gas mixtures (1)
- Dynamic surface leaching test (1)
- E$volution (1)
- EAF slags (1)
- EDX Analysis (1)
- EN 717-3 (1)
- EOF (1)
- EOF/AOF (1)
- EU EMPIR (1)
- EU regulations (1)
- Early european inks (1)
- Earthen building materials (1)
- Eco-efficiency analysis (1)
- Ecology (1)
- Ecotoxicity testing (1)
- Ecotoxicity tests (1)
- Ecotoxicological tests (1)
- Ecotoxixity (1)
- Edible insects (1)
- Effective uptake rate (1)
- Efficacy (1)
- Efflux (1)
- Egypt (1)
- Electric arc furnace (EAF) slags (1)
- Electric arc furnace slags (1)
- Electrochemical remediation (1)
- Electronic (1)
- Electronic Lab Notebook (ELN) (1)
- Element analysis (1)
- Element mass concetration (1)
- Elemental aerosol analysis (1)
- Elemental composition (1)
- Eluates (1)
- Emerging Contaminants (1)
- Emission Test Chamber (1)
- Emission Testing (1)
- Emission chamber testing (1)
- Emission chambers (1)
- Emission test chamber procedure (1)
- Emission test method (1)
- Emissions of hazardous gases (1)
- Emisson testing (1)
- Enamel colors (1)
- Enamels (1)
- Entomopathogenic Fungus (1)
- Entropy (1)
- Environmental Chemistry (1)
- Environmental Engineering (1)
- Environmental assessment (1)
- Environmental conditions (1)
- Environmental friendly (1)
- Environmental impact (1)
- Environmental simulations (1)
- Epidemal layer (1)
- Erfurt (1)
- Essential oils (1)
- European research area (1)
- Eurotiomycetes (1)
- Exergy (1)
- Exocrine gland (1)
- Expansion (1)
- Experimental evolution (1)
- Exposure (1)
- Exposure risk (1)
- External (1)
- Extracellular enzymes (1)
- Extracellular pH (1)
- Extractable organic fluorine (1)
- Extraction (1)
- Extreme environments (1)
- Extremophile (1)
- Extremophiles (1)
- Extremophilic fungi (1)
- F pili (1)
- FAT class concept (1)
- FFF-3D printer (1)
- FFF-3D printing (1)
- FFF-filament (1)
- FFF-printing (1)
- FT-Raman (1)
- FTIR (1)
- FTIR spectroscopy (1)
- FactSage calculations (1)
- FactSageTM calculations (1)
- Fakes (1)
- Family archives (1)
- Faraday cup aerosol electrometer (1)
- Fatigue (1)
- Façade (1)
- Feeding behaviour (1)
- Femtosecond laser processing (1)
- Fenton-like reaction (1)
- Fiber (1)
- Fibre (1)
- Fibre analysis (1)
- Filament comparison (1)
- Fire-retardant paint (1)
- Flask method (1)
- Flexible shadow masks (1)
- Flow chamber system (1)
- Flow-System (1)
- Flow-system (1)
- Fluor XANES (1)
- Fluorescence spectroscopy (1)
- Fluorescent microscopy (1)
- Fluorescent proteins (1)
- Fluoride nanoparticles (1)
- Fluorides (1)
- Fluorolytic sol-gel synthesis (1)
- Fluorolytic sol−gel (1)
- Fluorometric sensing (1)
- Food (1)
- Food fermentation (1)
- Food safety (1)
- Force distance curve (1)
- Forest fires (1)
- Forest soils (1)
- Forgery (1)
- Formation enthalpy (1)
- Foward genetics (1)
- Fractal structure (1)
- Fractional factorial (1)
- Fragmented manuscripts (1)
- Fuel sorption (1)
- Functionalized graphene (1)
- Fungal decay (1)
- Fungal stress mechanisms and responses (1)
- Fungicidal property (1)
- Fungiculture (1)
- Fusarium (1)
- GAeF (1)
- GC-FID (1)
- GC-MS (1)
- GDL (1)
- GNBP-2 (1)
- Gas analysis (1)
- Gas chromatography - mass spectrometry (GC-MS) (1)
- Gas sensing (1)
- Gas storage (1)
- Gene expression (1)
- Gene network (1)
- General Chemistry (1)
- General Environmental Science (1)
- General Materials Science (1)
- General Medicine (1)
- Genetic tools (1)
- Genome (1)
- Genome editing (1)
- Geobiology (1)
- Geological formation (1)
- Geology (1)
- Geomembranes (1)
- Geruchsmessung (1)
- Giulio Romano (1)
- Glass paints (1)
- Global radiation (1)
- Gold (1)
- Gothic incursions (1)
- Granulat (1)
- Graphene (1)
- Graphene–bacteria interaction (1)
- Gray mold fungus (1)
- Green facades (1)
- Green pesticide (1)
- Greenhouse gas accounting (1)
- Greenhouse gas balance (1)
- Greenhouse gas mitigation (1)
- Grouts (1)
- Growth-rate homeostasis (1)
- Gut symbionts (1)
- Gypsum fiberboards and synthetic gypsum (1)
- Gypsum plasterboards (1)
- Gypsum waste (1)
- HI-Tension (1)
- HR-CS-GFMAS (1)
- Halogenation (1)
- Halophilic (1)
- Halophilic bacteria (1)
- Hazard properties (1)
- Hazardous waste (1)
- Haze Samples (1)
- Hazenite (1)
- Headspace GC-MS (1)
- Health, Toxicology and Mutagenesis (1)
- Healthcare (1)
- Heat capacity (1)
- Heat maps (1)
- Heavy metal free (1)
- Heavy metals (1)
- Hebrew studies (1)
- Hellenistic (1)
- Herbaspirillum seropedicae (1)
- Herculaneum papyri (1)
- Hermopolis (1)
- Herteogeneous phenotypes (1)
- Heterologous expression (1)
- Heterologous gene expression (1)
- High density polyethylene (1)
- High salinity (1)
- Historic buildings (1)
- Historic ink (1)
- History of Art (1)
- Holy Family (1)
- Holzschutzmittel (1)
- Honey bee (1)
- Honeybee (1)
- Hospital premises (1)
- Host and symbiont ecology (1)
- Host immunity (1)
- Household waste (1)
- Human plasma (1)
- Hydration products (1)
- Hydraulic engineering (1)
- Hydrogen permeation (1)
- Hydrogen storage (1)
- Hydrogenasen (1)
- Hydrophobic interaction (1)
- Hygienic behavior (1)
- Hylotrupes bajulus (1)
- Hylotrupes bajulus, Anobium punctatum, natural durability, tropical wood, native wood. (1)
- Hyperarid (1)
- Hyperbranched polymer (1)
- Hypermutation (1)
- Hypopharynx (1)
- IAQ (1)
- ICP-OES (1)
- IEQ (1)
- IPM in museums (1)
- IR spectroscopy (1)
- ISO 22196 (1)
- ISO REMCO (1)
- ISO/TC 229 Nanotechnologies (1)
- ISO22196 (1)
- ITS region (1)
- Idiopathic environmental intolerance (1)
- Igg (1)
- Illness-induced anorexia (1)
- Illuminated manuscripts (1)
- Immune gene prediction (1)
- ImmunoDB (1)
- Immunoglobulins (1)
- Immunoprecipitation (1)
- Implants (1)
- In situ synchrotron x-ray diffraction (1)
- In-situ Process Monitoring (1)
- In-vivo mutagenesis (1)
- Incubated soil/fertilizer mixtures (1)
- Indirect photolysis (1)
- Indoor Air Quality (1)
- Indoor Air: Adsorbent performance (1)
- Indoor Products (1)
- Indoor air (1)
- Indoor emission (1)
- Indoor mycobiome (1)
- Inducible promoter (1)
- Industrial and Manufacturing Engineering (1)
- Industrial applications (1)
- Industrial mycology (1)
- Infecting a number of insects, (1)
- Infections (1)
- Infrared thermography (1)
- Initial attachment (1)
- Ink corrosion (1)
- Ink fingerprint (1)
- Ink terminology (1)
- Insect evolution (1)
- Insecticide (1)
- Instrumentation (1)
- Integrated Museum Pest Management (IMPM) (1)
- Inter-comparison (1)
- Inter-lab comparison (1)
- Inter-laboratory test (1)
- Intercomparison (1)
- Interdisciplinarity (1)
- Internal pores (1)
- Intraparticle diffusion (1)
- Intumescent coating (1)
- Iodine (1)
- Ionic liquid (1)
- Ionizing radiation (1)
- Iron gall ink (1)
- Iron making (1)
- Iron oxide (1)
- Iron scrap (1)
- Isotopes (1)
- Issues (1)
- Jewish cultures (1)
- Jig (1)
- Joint grouts (1)
- Knock-out mutant (1)
- Kunststoffdichtungsbahnen (1)
- LC-MS/MS (1)
- LCA (1)
- LCC (1)
- LIBS (1)
- Laboratory breeding (1)
- Labrum (1)
- Laccase (1)
- Lake Cadagno (1)
- Landfill (1)
- Landfill lining (1)
- Laser Printer (1)
- Laser printer emission (1)
- Laser structuring (1)
- Laser-induced nanostructures (1)
- Laser-induced pariodic surface structures (1)
- Laser-induced periodic surface structueres (LIPPS) (1)
- Laser-modified surface (1)
- Layer-by-Layer (1)
- Lead (1)
- Lead books (1)
- Leonardo da Vinci (1)
- Lfe cycle assessment (1)
- Library pests (1)
- Lifetime (1)
- Light regulation (1)
- Light sensing (1)
- Light-induced stress (1)
- Lightning talk (1)
- Lightweighting (1)
- Lignocellulose (1)
- Limit values (1)
- Limitations (1)
- Limnoria spp (1)
- Linker (1)
- Low alloy steel (1)
- Low cost aerosol PM sensor (1)
- Low melting glasses (1)
- Low-molecular-weight organic substances (1)
- Low-tech approach (1)
- Luftgüte (1)
- Lysimeter, Antimony (1)
- MDG ICP-ToF-MS (1)
- MIC Island (1)
- MIC projekt (1)
- MSWI Bottom Ash (1)
- MSWI fly ash (1)
- Major transition (1)
- Manuscript making (1)
- Map production and publishing (1)
- Maps and colours (1)
- Marek's Disease Virus (1)
- Marek's virus (1)
- Marine borers (1)
- Market surveillance (1)
- Mask fabrication (1)
- Mass spectrometry (1)
- Mass spectroscopy (1)
- Material Analysis (1)
- Material analysis (1)
- Material degradation (1)
- Material emissions testing (1)
- Material recycling (1)
- Material surface colonisation (1)
- Materials (1)
- Materials Chemistry (1)
- Materials emissions testing (1)
- Materials flow (1)
- Mathematical analysis (1)
- Mathematical modelling (1)
- Mechanische Stabilität (1)
- Mechanisms of pathogenesis (1)
- Mechanosensitive channel (1)
- Medical mycology (1)
- Medieval glasses (1)
- Medieval-stained glass (1)
- Melanin Adhesion (1)
- Melanins (1)
- Melting point (1)
- Melting temperature (1)
- Metabolic engineering (1)
- Metabolic flux analysis (1)
- Metabolic modeling (1)
- Metadata (1)
- Metal organic frameworks (1)
- Metal recovery (1)
- Metal reducing bacteria (1)
- Metallic silver precipitates (1)
- Metalls (1)
- Metals (1)
- Metals and Alloys (1)
- Metarhizium (1)
- Metarhizium robertsii DSM 1490 (1)
- Methane (1)
- Methanogenesis (1)
- Methods of scientific analysis (1)
- Microbe (1)
- Microbial abundance (1)
- Microbial adhesions (1)
- Microbial communities (1)
- Microbial community modelling (1)
- Microbial simulation, (1)
- Microbial survival mechanisms (1)
- Microbially Induced Corrosion (1)
- Microbially induced carbonate precipitation (MICP) (1)
- Microbiologically Influrenced Corrosion (MIC) (1)
- Microchamber (1)
- Microdroplet generator (1)
- Microfluidics (1)
- Micromonospora aurantiaca (1)
- Microorganisms (1)
- Microwaves (1)
- Migration (1)
- Mikrobiell (1)
- Mikroplastik (1)
- Millipedes (1)
- Mineral (1)
- Mineral weathering (1)
- Mining (1)
- Mircobially influcenced corrosion (1)
- Mixed Inks (1)
- Mixture toxicity (1)
- Mobile anodisation (1)
- Mobile application (1)
- Model aerosols (1)
- Model organism (1)
- Modeling (1)
- Modern painting (1)
- Modified mycotoxins (1)
- Moisture (1)
- Moisture performance (1)
- Molecular (1)
- Molecular Organic Frameworks (1)
- Molecular clock (1)
- Molecular identification (1)
- Molybdenum (1)
- Monoterpene (1)
- Moriscos (1)
- MscS (1)
- Mud volcanoe fluids (1)
- Multi-resistant bacteria (1)
- Multi-scale study (1)
- Multicellularity (1)
- Multidisciplinary (1)
- Multilocus phylogeny (1)
- Multiple Displacement Amplification (1)
- Multiple chemical sensitivity (1)
- Multiple lines of evidence (1)
- Multiport (1)
- Municipal sewage sludge (1)
- Municipal solid waste (1)
- Museum insect pest (1)
- Museum pests (1)
- Mussel-inspired coating (1)
- Mussel-inspired materials (1)
- Mutagenesis (1)
- MySpot (1)
- Mycotoxin (1)
- Mycotoxins (1)
- Müllverbrennung (1)
- N and K analog tracer (1)
- NDT (1)
- NFDI (1)
- NGS (1)
- NIR imaging (1)
- NIR reflectography (1)
- Nano CRM (1)
- Nano Particles (1)
- Nano characterization (1)
- Nano metal fluorides (1)
- Nano-Fourier-transform infrared spectroscopy (1)
- Nano-materials (1)
- Nano@BAM (1)
- Nanobiocide (1)
- Nanocarrier (1)
- Nanocoating (1)
- Nanoplattform (1)
- Nanopowder (1)
- Nanorods (1)
- Nanosensor (1)
- Natural abundance of 15N (1)
- Natural durability (1)
- Natural ecosystems (1)
- Natural products discovery (1)
- Near ambient pressure XPS (1)
- Near ambient x-ray photoelectron spectroscopy (1)
- Near-infrared refectography (1)
- New exocrine organ (1)
- Next generation sequencing (1)
- Nickel (1)
- Niobium (1)
- Nitrate (1)
- Nitrogen fixation (1)
- Nitrogen uptake (1)
- Nitrososphaerales (1)
- Nitrous oxide (1)
- Non-destructive Materials (1)
- Non-destructive test (1)
- Non-ferrous metals (1)
- Non-invasive (1)
- Non-invasive scientific methods (1)
- Non-vitriolic iron-gall inks (1)
- Nonspecific binding (NSB) (1)
- Nonvolatile (1)
- Nostoc (1)
- Nostoc punctiforme (1)
- Novel sample preparation techniques (1)
- Nuclear waste disposal (1)
- Nutrient acquisition (1)
- Nutrient cycles (1)
- Nutrient uplift and recyclin (1)
- Nährstoffe (1)
- OIT (1)
- Oddy test (1)
- Office machines (1)
- Oil (1)
- Oil and gas industry (1)
- Oil and gas reservoir (1)
- Oilfield (1)
- On-line analysis (1)
- One-step ionic liquids synthesis (1)
- Open data (1)
- Operating Procedure (1)
- Optical and Magnetic Materials (1)
- Optical properties (1)
- Ordinance on Contaminated Sites and Soil Protection (1)
- Organic contaminants (1)
- Organic phosphorus breakdown (1)
- Organo fluorine analysis (1)
- Osmophobic effect (1)
- Osmotic shock (1)
- Osteogenesis (1)
- Oxide melts (1)
- P sink method (1)
- P speciation (1)
- P-efficiency (1)
- P-recovery (1)
- P. Fluorescens (1)
- PAH (1)
- PAK (1)
- PE-HD (1)
- PFAS analysis (1)
- PFAS analytics (1)
- PM (1)
- PM monitors (1)
- PP (1)
- PS (1)
- PV modules (1)
- Painting (1)
- Paints (1)
- Palaeography (1)
- Palimpsest (1)
- Paper (1)
- Paper sizings (1)
- Paper tinting (1)
- Particle (1)
- Particle Size (1)
- Particle emission (1)
- Particle synthesis (1)
- Particulate emissions (1)
- Partikel (1)
- Partikeln (1)
- Parylene C (1)
- Pathogen spillover (1)
- Pathogen transmission (1)
- Pathogen virulence (1)
- Pentimenti (1)
- Peptide-derived components (1)
- Per- and polyfluorinated alkly substances (PFASs) (1)
- Perfluorierte Verbindungen (1)
- Perfluorocarboxylic acid (PFCA) (1)
- Performance (1)
- Performance comparison (1)
- Periodate oxidation (1)
- Permeability (1)
- Persian historical recipes (1)
- Persian manuscript (1)
- Pest control (1)
- Pesticides (1)
- Phase formation (1)
- Phase separation (1)
- Phase transformation (1)
- Phenotypic heterogeneity (1)
- Phenotypic variation (1)
- Phoshpor availability (1)
- Phosphate dynamics (1)
- Phosphate extractability and availability (1)
- Phosphonic acids (1)
- Phosphorous recovery (1)
- Phosphorus K-edge-XANES spectroscopy (1)
- Phosphorus availability (1)
- Phosphorus elimination (1)
- Phosphorus plant-availability (1)
- Phosphorus recycling (1)
- Phosphous recovery (1)
- Photocatalytic surfaces (1)
- Photodynamic therapy (1)
- Photometric P determination (1)
- Photonics (1)
- Photoperception (1)
- Photoreceptors (1)
- Phototrophic bacteria (1)
- Phototrophs (1)
- Phyllosphere (1)
- Physical and optical characteristics (1)
- Pilot comparison (1)
- Plant Experiment (1)
- Plant availability (1)
- Plant economic spectrum (1)
- Plant growth test (1)
- Plant-availability (1)
- Plasma (1)
- Plastic biofilm (1)
- Plastic degradation (1)
- Plastic pollution (1)
- Plastic waste (1)
- Platinum (1)
- Poficiency test (1)
- Pollution (1)
- Polydopamine (1)
- Polyelektrolyt (1)
- Polyethylene terephthalate (1)
- Polyfluorinated alcohol (PFOH) (1)
- Polyioinic liquid (1)
- Polymer (1)
- Polymer Matrix Composites (1)
- Polymer foils (1)
- Polymer-based products (1)
- Polymerase mutant (1)
- Polypropylene (1)
- Polystyrene (1)
- Polyurethanes (1)
- Porosity (1)
- Portrayal of St Joseph (1)
- Poster presentation (1)
- Pot experiment (1)
- Pot experiments (1)
- Potential toxic elements (1)
- Preferential binding (1)
- Preferential exclusion (1)
- Preservation (1)
- Probiotic-based vaccines (1)
- Probiotics (1)
- Process Metallurgy (1)
- Process control (1)
- Process development (1)
- Process monitoring (1)
- Process upscaling (1)
- Proficiency Test (1)
- Proficiency testing (1)
- Proofreading deficient (1)
- Prospective risk assessment (1)
- Protective glazing (1)
- Protein (1)
- Protein a (1)
- Protein hydrolysis (1)
- Protein immobilization (1)
- Protein quantification (1)
- Proteome (1)
- Proteomics (1)
- Pseudomonas (1)
- Pseudomonas fluorescens (1)
- Pseudomonas veronii (1)
- Ptinidae (1)
- Public Health, Environmental and Occupational Health (1)
- Push-out Test (1)
- Pyrolysis (1)
- QA/QC (1)
- Quality assurance/quality control (1)
- Quantum dot (1)
- Quasispecies (1)
- REACH (1)
- RNA extraction (1)
- RNA interference (1)
- RNA-Seq (1)
- RNA-Sequencing (1)
- RNAi (1)
- Radio waves (1)
- Radiocarbon (1)
- Radon (1)
- Radon exhalation (1)
- Raphael school (1)
- Reactor conditions (1)
- Real-time qPCR (1)
- Recipes (1)
- Recovery potential (1)
- Recovery rate (1)
- Recycled gypsum (1)
- Recycled sources (1)
- Red chalk (1)
- Red mud (1)
- Reduction (1)
- Reductive decomposition (1)
- Reductive defluorination (1)
- Reductive iron assimilation (1)
- Reference data (1)
- Reference nanoparticles (1)
- Reference organisms (1)
- Reference procedures (1)
- Reference samples (1)
- Regulation (1)
- Release kinetics (1)
- Research Data Infrastructure (1)
- Research Data Management (1)
- Resistance model (1)
- Resource Recovery (1)
- Resources (1)
- Reverse painting on glass (1)
- Reverse paintings on glass (1)
- Reworking (1)
- Rhenanite (1)
- Rhizopus (1)
- Rhizopus and Aspergillus oryzae (1)
- Rhizosphere (1)
- Rhizosphere effect (1)
- Rhizosphere processes (1)
- Rhodonia placenta (1)
- Rice (1)
- Road construction waste (1)
- Robustness validation (1)
- Rock biofilm (1)
- Rock leaching (1)
- Rock-inhabiting black fungi (1)
- Rock-inhabiting fungi (1)
- Root economics space (1)
- Rostral gland (1)
- Rround robin test (1)
- Ruthenium (1)
- SARS (1)
- SAXS (1)
- SCALE (1)
- SDS-PAGE (1)
- SEM (1)
- SEM micrography (1)
- SEM wood characterization (1)
- SEM-EDS (1)
- SERS (1)
- SIMS (1)
- SOP (1)
- SPE extraction (1)
- SRB (1)
- SVOC (1)
- Safety (1)
- Salts (1)
- Sample preparation (1)
- Sanierung (1)
- Sc recovery (1)
- Scanning micro-X-ray fluorescence (1)
- Scattering-type scanning near-field optical microscopy (s-SNOM) (1)
- Schwermetalle (1)
- Scribal corrections (1)
- Scythica Vindobonensia, (1)
- Secondary P-fertilizer (1)
- Secondary Recources (1)
- Secondary metabolism (1)
- Secondary metabolites (1)
- Secondary raw materials (1)
- Secondary resources (1)
- Sediment (1)
- Selection (1)
- Selective Chlorination (1)
- Selective quantification (1)
- Self-assembled monolayer (1)
- Self-assembled monolayer (SAM) (1)
- Self-assembled monolayers (SAM) (1)
- Semivolatile organic compounds (1)
- Sensors (1)
- Separate collection (1)
- Sequence annotation (1)
- Sets of archaeometric data (1)
- Sewage Sludge (1)
- Sewage Sludge Ashes (1)
- Sewage extraction (1)
- Sewage sludge ash (SSA) (1)
- Sewage sludge disposal (1)
- Sewage sludge incineration (1)
- Short crack propagation (1)
- Siderophore (1)
- Signal transduction (1)
- Silica and polystyrene nanoparticles (1)
- Silicate (1)
- Silicon carbide (1)
- Silver (1)
- Silver diffusion (1)
- Simulation (1)
- Simulation of materials degradation (1)
- Single cell microbiology (1)
- Sintering (1)
- Sixteenth-century painting technique (1)
- Size exclusion chromatography (1)
- Sizing (1)
- Small angle x-ray scattering (1)
- Smartphone (1)
- Social Immunity (1)
- Social insect (1)
- Social insects (1)
- Sociality (1)
- Software (1)
- Soil contact (1)
- Soil extraction (1)
- Soil incubation study (1)
- Soil-feeding habit (1)
- Soil-like materials (1)
- Soils (1)
- Solar panels (1)
- Solar parks (1)
- Soldier (1)
- Solid phase (1)
- Solid phase extraction (SPE) (1)
- Solid-liquid extraction (1)
- Solid-phase extraction (SPE) (1)
- Solitary bees (1)
- Solute excretion (1)
- Solvents (1)
- Solvolysis (1)
- Spectral imaging (1)
- Stained glass windows (1)
- Stained glasses (1)
- Stainless steel (1)
- Stakeholder (1)
- Standardized test and quantification procedure (1)
- Steelmaking residues (1)
- Stoichiometric homeostasis (1)
- Stone cultural heritage (1)
- Stop/flow experiments model (1)
- Strategy and Management (1)
- Stress conditions (1)
- Structural color (1)
- Sub-4nm particles (1)
- Subjective complaints (1)
- Subsocial (1)
- Subsoil nutrient tracing (1)
- Sugar cane bagasse (1)
- Sugarcane bagasse (1)
- Sum parameter (1)
- Sum parameter analyis (1)
- Sum parameter analysis (1)
- Superhydrophilic surface (1)
- Superhydrophobic surface (1)
- Suppression (1)
- Surface chemistry (1)
- Surface functionalization (1)
- Surface interactions (1)
- Surface water (1)
- Surface waters (1)
- Surfacewaters (1)
- Survival rates (1)
- Synchotron (1)
- Synchrotron radiation (1)
- Synchrotron-XPS (1)
- Synergy (1)
- Synthesis (1)
- Synthetic metabolism (1)
- Systematics (1)
- TED-GC/MS (1)
- TEM (1)
- TXRF ambient air aerosol chemical analysis aerosol element composition (1)
- Tanning (1)
- Tannins (1)
- Targeted and nontargeted (1)
- Targeting, Nanoparticles (1)
- Taxonomy (1)
- Temperate rain forest (1)
- Temple Scroll (1)
- Tems (1)
- Terbutryn (1)
- Teredo sp (1)
- Termite control (1)
- Termite-associated microbes (1)
- Termitoidae (1)
- Test method (1)
- Test strip (1)
- Teststreifen (1)
- Text analysis (1)
- Thermal Desorption (1)
- Thermal Extraction (1)
- Thermal analysis (1)
- Thermal degradation (1)
- Thermal imaging (1)
- Thermal properties (1)
- Thermo-desorption (1)
- Thermocouple (1)
- Thermodynamic (1)
- Thermoplastic filaments (1)
- Thioimidazolium (1)
- Tinting (1)
- ToF SIMS (1)
- ToF-SIMS (1)
- Tomography (1)
- Torah (1)
- Torah Scrolls (1)
- Torah scrolls (1)
- Touch surfaces (1)
- Trait-based ecology (1)
- Transmission electron microscopy (1)
- Transport modeling (1)
- Transposon (1)
- Tripartite interactions (1)
- Typology of Inks (1)
- Tyrosine (1)
- UV absorption (1)
- UV protection (1)
- UV tolerance (1)
- UV-VIS Reflectance spectroscopy (1)
- UV-VIS reflectance spectroscopy (1)
- Ultrashort PFAS (1)
- Ultrashort laser processing (1)
- Ultrastructure (1)
- Umweltmessung (1)
- Up-cycling (1)
- Uptake rate (1)
- Uranium (1)
- Uranium mining (1)
- Urban mining (1)
- Ureolytic bacteria (1)
- Utilisation (1)
- Utilization (1)
- VAMAS (1)
- VIS (1)
- VOC Emission (1)
- VOC Emissionen (1)
- VOC emission (1)
- VOC transfer standards (1)
- VOC-Emission (1)
- Validation trial (1)
- Vasari (1)
- Velocimetry (1)
- Vienna manuscript (1)
- Viruses (1)
- Vitriolic iron-gall inks (1)
- Volatile organic compound (1)
- Volatile organic compounds (VOC) (1)
- Vues des Cordillères (1)
- WKI flask method (1)
- Waste incineration (1)
- Waste water (1)
- Waste water treatment (1)
- Water (1)
- Water atmosphere (1)
- Water contact (1)
- Water stable isotope analysis (1)
- Water uptake (1)
- Weathering tests (1)
- Weld fatigue (1)
- Weld toe geometry (1)
- Wet-mechanical treatment (1)
- White-rot fungi (1)
- Wood Modification (1)
- Wood ash (1)
- Wood samples (1)
- Writing Ink (1)
- Writing materials (1)
- X-Ray analysis (1)
- X-Ray fluorescence (1)
- X-ray based techniques (1)
- X-ray diffraction (XRD) (1)
- X-ray fuorescence (1)
- X-ray spectroscopic techniques (1)
- X-ray spectroscopy (1)
- X-ray tomographic (1)
- X-rays (1)
- XRF Analysis (1)
- XRF imaging (1)
- XRF ink analysis (1)
- XRF-, VIS- FTIR-spectroscopy (1)
- Xestobium rufovillosum (1)
- Yeast (1)
- ZIF (1)
- ZIF-8 (1)
- Zearalenone (1)
- Zearalenone sulfate (1)
- Zeolite (1)
- Zeolithe (1)
- Zinc chloride (1)
- Zinc oxide (1)
- a-zearalenol (1)
- biocide tolerance (1)
- black fungi (1)
- black fungus (1)
- carotenoids (1)
- disinfection (1)
- dsDAN monolayer (1)
- evolution (1)
- fertilizer (1)
- fs-laser processing (1)
- fungus (1)
- genomics (1)
- heterogeneity (1)
- historic inks (1)
- iChip (1)
- individual-based modelling (1)
- infrared spectroscopy (1)
- ink (1)
- mRNA-seq (1)
- microspectroscopy (1)
- multi scale testing (1)
- natural ventilation (1)
- openBIS (1)
- pH (1)
- pH probe (1)
- pH sensor (1)
- pHe (1)
- papyrus (1)
- pigmentation (1)
- qPCR (1)
- soil (1)
- underexplored phyla (1)
- x-ray diffraction (1)
- ‘Green’ pesticide (1)
Organisationseinheit der BAM
- 4 Material und Umwelt (813) (entfernen)
Paper des Monats
- ja (19)
The development of traceable new methodologies to quantify elemental air pollutants in particulate matter (PM) supports modernization of methods used in air quality monitoring networks in Europe. In the framework of the EURAMET EMPIR AEROMET II project, the combination of cascade impactor aerosol sampling and total reflection X-ray fluorescence elemental spectroscopy (TXRF) was investigated. This technique requires a traceable calibration based on reference samples. This paper describes a new, simple and effective method to produce such reference samples using flexible, reusable, and low-cost parylene C shadow masks, fabricated by photolithographic steps. These shadow masks can be used to produce reference samples that mimic the Dekati cascade impactor’s deposition patterns by applying as-prepared micro stencils to 30 mm acrylic substrates and evaporating a reference material (Ti) in arrangements of thin circular dots. The highly flexible direct patterning of acrylic discs with reference material, otherwise impossible with conventional photolithography, allows multiple reusing of the same micro stencils. The aspect ratios of the dots could be repeated with an error less than 4 %. A first set of standard reference samples for the 13 stages of the Dekati cascade impactor was produced and preliminary TXRF measurements of the deposited Ti masses were performed. The centricity of the deposition patterns turned out to be an important parameter for the quality of the TXRF results. The parylene mask technology for the production of reference samples turns out to be a promising new approach for the traceable calibration of TXRF spectrometers for the quantification of element concentrations in environmental aerosol samples but, due to its great versatility, it could be used for several other micropatterning applications on conventional and unconventional substrates.
Quantitative chemical analysis of airborne particulate matter (PM) is vital for the understanding of health effects in indoor and outdoor environments, as well as for enforcing air quality regulations. Typically, airborne particles are sampled over long time periods on filters, followed by lab-based analysis, e.g., with inductively coupled plasma mass spectrometry (ICP-MS). Within the EURAMET EMPIR AEROMET project, cascade impactor aerosol sampling was combined for the first time with on-site total reflection X-ray fluorescence (TXRF) spectroscopy to develop a tool for quantifying particle element compositions within short time intervals and even on-site. This makes variations of aerosol chemistry observable with time resolution of only a few hours and with good size resolution in the PM10 range. A proof of principles of this methodological approach and the comparison to standard methods within the scope of a field campaign will be presented. Secondly, aerosol sampling and TXRF analysis seems suitable for the quantification of elements in indoor aerosols as well and may provide an important enhancement of existing methods for the analysis of organic species in aerosols (such as sampling and TD-GC/MS). As an example, the TXRF analysis of particles emitted from laser printers under controlled conditions in an environmental test chamber will be presented.
The use of highly water-soluble phosphorus (P) fertilizers can lead to P fixation in the soil, reducing fertilization efficiency. Waste-derived, low water-solubility sources can potentially increase sugarcane’s P uptake compared to triple superphosphate by reducing adsorption to the soil.
Aims:We aimed to test struvite, hazenite, and AshDec® for their agronomic potential as recycled fertilizers for sugarcane production in a typical tropical soil.We hypothesize that these sources can reduce P fixation in the soil, increasing its availability and sugarcane’s absorption.
Methods: In a greenhouse pot experiment, two consecutive sugarcane cycles, 90 days each, were conducted in a Ferralsol. The recovered sources struvite, hazenite, AshDec®, and the conventional triple superphosphate were mixed in the soil in three P doses (30, 60, and 90 mg kg–1), aside a control (nil-P). At both harvests, sugarcane number of sprouts, plant height, stem diameter, dry mass yield, shoot phosphorus, and soil P fractionation were investigated.
Results: At 90 days, struvite and hazenite performed better for dry mass yield (70.7 and 68.3 g pot–1, respectively) than AshDec® and triple superphosphate (59.8 and 57.4 g pot–1, respectively) and for shoot P, with 98.1, 91.6, 75.6, and 66.3 mg pot–1, respectively. At 180 days, struvite outperformed all treatments for dry mass yield (95.3 g pot–1) and AshDec® (75.5 mg pot–1) for shoot P. Struvite was 38% and hazenite 21% more efficient than triple superphosphate in P uptake, while AshDec® was 6% less efficient. Soil had higher labile P under struvite, hazenite, and AshDec® than triple superphosphate by the end of the first cycle, while only the later increased nonlabile P by the end of the experiment (180 days).
Conclusions:Waste-derived P sources were more efficient in supplying P for sugarcane and delivering labile P in 180 days than triple superphosphate.
Improved Durability of Wood Treated with Nano Metal Fluorides against Brown-Rot and White-Rot Fungi
(2022)
Low-water soluble metal fluorides such as magnesium fluoride (MgF2) and calcium Fluoride (CaF2) were evaluated for decay protection of wood. Initially, the biocidal efficacy of nano metal fluorides (NMFs) against wood destroying fungi was assessed with an in-vitro agar test. The results from the test showed that agar medium containing MgF2 and CaF2 was more efficient in preventing fungal decay than stand-alone MgF2 or CaF2. These metal fluorides, in their nanoscopic form synthesized using fluorolytic sol-gel synthesis, were introduced into the sapwood of Scots pine and beech wood and then subjected to accelerated ageing by leaching (EN 84). MAS 19F NMR and X-ray micro CT images showed that metal fluorides were present in treated wood, unleached and leached. Decay resistance of Scots pine and beech wood treated with NMFs was tested against Wood destroying fungi Rhodonia placenta and Trametes versicolor in accordance with EN 113. Results revealed that mass losses were reduced to below 3% in wood treated with the combination of MgF2 and CaF2.
It is concluded that NMFs provide full protection to wood even after it has been leached and can be used as wood preservatives in outdoor environments.
Here, we describe an optimized fast and simple extraction method for the determination of per- and polyfluorinated alkyl substances (PFASs) in soils utilizing high resolution-continuum source-graphite furnace molecular absorption spectrometry (HR–CS–GFMAS). To omit the bias of the solid phase extraction (SPE) step commonly used during the analysis of extractable organically bound fluorine (EOF) we optimized a fast and simple SPE-free extraction method. The developed extraction method consists of a liquid-solid extraction using acidified methanol without any additional SPE. Four extraction steps were representative to determine a high proportion of the EOF (>80% of eight extractions). Comparison of the optimized method with and without an additional SPE clean-up step revealed a drastic underestimation of EOF concentrations using SPE. Differences of up to 94% were observed which were not explainable by coextracted inorganic fluoride. Therefore, not only a more accurate but also a more economic as well as ecologic method (bypassing of unnecessary SPE) was developed. The procedural limit of quantification (LOQ) of the developed method was 10.30 μg/kg which was sufficient for quantifying EOF concentrations in all tested samples. For future PFAS monitoring and potential regulative decisions the herein presented optimized extraction method can offer a valuable contribution.
Most of our knowledge on insect cuticular hydrocarbons (CHCs) stems from analytical techniques based on gas-chromatography coupled with mass spectrometry (GC-MS). However, this method has its limits under standard conditions, particularly in detecting compounds beyond a chain length of around C40. Here, we compare the CHC chain length range detectable by GC-MS with the range assessed by silver-assisted laser desorption/ionization mass spectrometry (Ag-LDI-MS), a novel and rarely applied technique on insect CHCs, in seven species of the order Blattodea. For all tested species, we unveiled a considerable range of very long-chain CHCs up to C58, which are not detectable by standard GC-MS technology. This indicates that general studies on insect CHCs May frequently miss compounds in this range, and we encourage future studies to implement analytical techniques extending the conventionally accessed chain length range. Furthermore, we incorporate 3D scanned insect body surface areas as an additional factor for the comparative quantification of extracted CHC amounts between our study species. CHC quantity distributions differed considerably when adjusted for body surface areas as opposed to directly assessing extracted CHC amounts, suggesting that a more accurate evaluation of relative CHC quantities can be achieved by taking body surface areas into account.
The bipartite interactions between insect hosts and their bacterial gut microbiota, or their bacterial pathogens, are empirically and theoretically well-explored. However, direct, and indirect tripartite interactions will also likely occur inside a host. These interactions will almost certainly affect the trajectory of pathogen virulence evolution, an area that is currently under researched. The interactions within tripartite associations can be competitive, that is, exploitative-competition, interference-competition or apparent-competition. Competitive interactions will be significantly influenced by non-competitive effects, for example, immunopathology, immunosuppression, and microbiota-mediated tolerance. Considering a combination of these interactions and effects, will enable an increased understanding of the evolution of pathogen virulence. This new perspective allows us to identify several novel research questions, which we hope will be a useful framework for future research.
Plants and microorganisms, besides the climate, drive nitrogen (N) cycling in ecosystems. Our objective was to investigate N losses and N acquisition strategies along a unique ecosystem-sequence (ecosequence) ranging from arid shrubland through Mediterranean woodland to temperate rainforest. These ecosystems differ in mean annual precipitation, mean annual temperate, and vegetation cover, but developed on similar granitoid soil parent material, were addressed using a combination of molecular biology and soil biogeochemical tools. Soil N and carbon (C) contents, δ15N signatures, activities of N acquiring extracellular enzymes as well as the abundance of soil bacteria and fungi, and diazotrophs in bulk topsoil and rhizosphere were determined. Relative fungal abundance in the rhizosphere was higher under woodland and forest than under shrubland. This indicates toward plants' higher C investment into fungi in the Mediterranean and temperate rainforest sites than in the arid site. Fungi are likely to decompose lignified forest litter for efficient recycling of litter-derived N and further nutrients. Rhizosphere—a hotspot for the N fixation—was enriched in diazotrophs (factor 8 to 16 in comparison to bulk topsoil) emphasizing the general importance of root/microbe association in N cycle. These results show that the temperate rainforest is an N acquiring ecosystem, whereas N in the arid shrubland is strongly recycled. Simultaneously, the strongest 15N enrichment with decreasing N content with depth was detected in the Mediterranean woodland, indicating that N mineralization and loss is highest (and likely the fastest) in the woodland across the continental transect. Higher relative aminopeptidase activities in the woodland than in the forest enabled a fast N mineralization. Relative aminopeptidase activities were highest in the arid shrubland. The highest absolute chitinase activities were observed in the forest. This likely demonstrates that (a) plants and microorganisms in the arid shrubland invest largely into mobilization and reutilization of organically bound N by exoenzymes, and (b) that the ecosystem N nutrition shifts from a peptide-based N in the arid shrubland to a peptide- and chitin-based N nutrition in the temperate rainforest, where the high N demand is complemented by intensive N fixation in the rhizosphere.
Axial passive sampling of VOCs with Tenax® TA and thermal desorption GC-MS analysis is an accepted alternative to active sampling in occupational hygiene. In theory, the uptake into the passive sampler is only dependent on the diffusion coefficient of the analyte in air and the geometry of the sampler (ideal adsorption). For characterization, the uptake rate (UR) is used defined as the ratio of the mass adsorbed and the product of ambient concentration and exposure time. Various reported effective uptake rates (UR,eff) differ to an increasing degree from ideal values (UR,id) with increasing exposure doses (denominator of the given definition of UR), (Tolnai, 2001). In national and international standards, uptake rates are essentially sorted by the applicable exposure time, while detailed information about the corresponding concentration range is lacking. Moreover, especially for long exposure periods as applied in indoor air monitoring, the number of itemized substances is limited. Therefore it is the aim of this contribution to review and expand uptake rate data by comparison of literature and own laboratory values of assured quality. Passive samplers were exposed to nine single compound atmospheres of known concentrations for seven days. Concentrations were checked twice a day via active sampling.The determined uptake rates are considered accurate in terms of RSD and comparability to literature values and can be recommended for exposure times of seven days at 50 – 100 μg m-3 (approximately 100 – 300 ppm min). Seven-day uptake rates in ISO16017-2 and ASTM D6196 are not generally suited for this purpose, as has been exemplarily shown for benzene. Thus, it is crucial for optimization of the method to produce more reliable uptake rate data, including specific information about applicable exposure times and concentrations, which will be promoted in the course of this ongoing study.
Buildings exposed to water can release undesirable substances which, once transported to environmental compartments, may cause unwanted effects. These exposure pathways need to be investigated and included in risk assessments to safeguard water quality and promote the sustainability of construction materials. The applied materials, exposure conditions, distribution routes and resilience of receiving compartments vary considerably. This demonstrates the need for a consistent concept that integrates knowledge of emission sources, leaching processes, transport pathways, and effects on targets. Such a consistent concept can serve as the basis for environmental risk assessment for several scenarios using experimentally determined emissions. Typically, a source–path–target concept integrates data from standardized leaching tests and models to describe leaching processes, the distribution of substances in the environment and the occurrence of substances at different points of compliance. This article presents an integrated concept for assessing the environmental impact of construction products on aquatic systems and unravels currently existing gaps and necessary actions. This manuscript outlines a source–path–target concept applicable to a large variety of construction products. It is intended to highlight key elements of a holistic evaluation concept that could assist authorities in developing procedures for environmental risk assessments and mitigation measures and identifying knowledge gaps.
The environmental impact assessment of materials is usually based on laboratory tests, mostly in combination with models describing the longterm fate of the substances of interest in the targeted environmental compartment. Thus, laboratory tests are the fundamental link to achieve appropriate assessment conclusions which makes it essential to generate consistent results. This just as applies to the leaching of cementitious materials. In Europe, the leaching behavior of monolithic building materials is tested in the Dynamic Surface Leaching Test following the specification CEN/TS 16637–2. An interlaboratory comparison on European level regarding this technical specification showed relatively high intra- and interlaboratory variations for the tested materials (monolithic copper slag and cement stabilized coal fly ash). Therefore the German Committee for Structural Concrete (DAfStb) framed a guideline to specify additional testing conditions for cementitious materials. To assess the possible improvement by this guidelines measures, a round robin test with 11 participants from Germany and the Netherlands was conducted. This work aims to provide insight into the factors to be considered in the testing of alkaline materials, including sample preparation, and highlights crucial procedures and their manifestation in the results. All evaluated parameters showed improved results compared to the earlier round robin test. The relative standard deviations for repeatability (RSDr) and reproducibility (RSDR) of the elements calcium, barium, antimony, chromium, molybdenum and vanadium, which are the parameters evaluated in both round robin tests, were RSDr = 4%, 4%, 2%, 5%, 5%, and 5% respectively (4% in average) for this work, in comparison to the European round robin test with an average RSDr of 29% (17%, 17%, 20%, 40%, 36%, and 42%). The RSDR improved from 41% (30%, 36%, 29%, 57%, 40%, and 56%) to 14% (12%, 8%, 6%, 28%, 15%, and 12%). CO2 ingress during testing and the inaccuracy of eluate analytics for concentrations close to the determination limits were identified as the main sources of error.
Black microcolonial fungi (Ascomycetes from Arthonio-, Dothideo-, and Eurotiomycetes) are stress-tolerant and persistent dwellers of natural and anthropogenic extreme habitats. They exhibit slow yeast-like or meristematic growth, do not form specialized reproduction structures and accumulate the black pigment 1,8-dihydroxynaphthalene (DHN) melanin in the multilayered cell walls. To understand how black fungi live, survive, colonize mineral substrates, and interact with phototrophs genetic methods are needed to test these functions and interactions. We chose the rock inhabitant Knufia petricola of the Chaetothyriales as a model for developing methods for genetic manipulation. Here, we report on the expansion of the genetic toolkit by more efficient multiplex CRISPR/Cas9 using a plasmid-based system for expression of Cas9 and multiple sgRNAs and the implementation of the three resistance selection markers genR (geneticin/nptII), baR (glufosinate/bar), and suR (chlorimuron ethyl/sur). The targeted integration of expression constructs by replacement of essential genes for pigment synthesis allows for an additional color screening of the transformants. The black-pink screening due to the elimination of pks1 (melanin) was applied for promoter studies using GFP fluorescence as reporter. The black-white screening due to the concurrent elimination of pks1 and phs1 (carotenoids) allows to identify transformants that contain the two expression constructs for co-localization or bimolecular fluorescence complementation (BiFC) studies. The co-localization and interaction of the two K. petricola White Collar orthologs were demonstrated. Two intergenic regions (igr1, igr2) were identified in which expression constructs can be inserted without causing obvious phenotypes. Plasmids of the pNXR-XXX series and new compatible entry plasmids were used for fast and easy generation of expression constructs and are suitable for a broad implementation in other fungi. This variety of genetic tools is opening a completely new perspective for mechanistic and very detailed study of expression, functioning and regulation of the genes/proteins encoded by the genomes of black fungi.
The halophilic γ-proteobacterium Halomonas elongata DSM 2581T thrives at salt concentrations well above 10 % NaCl (1.7 M NaCl). A well-known osmoregulatory mechanism is the accumulation of the compatible solute ectoine within the cell in response to osmotic stress. While ectoine accumulation is central to osmoregulation and promotes resistance to high salinity in halophilic bacteria, ectoine has this effect only to a much lesser extent in non-halophiles. We carried out transcriptome analysis of H. elongata grown on two different carbon sources (acetate or glucose), and low (0.17 M NaCl), medium (1 M), and high salinity (2 M) to identify additional mechanisms for adaptation to high saline environments. To avoid a methodological bias, the transcripts were evaluated by applying two methods, DESeq2 and Transcripts Per Million (TPM). The differentially transcribed genes in response to the available carbon sources and salt stress were then compared to the transcriptome profile of Chromohalobacter salexigens, a closely related moderate halophilic bacterium. Transcriptome profiling supports the notion that glucose is degraded via the cytoplasmic Entner-Doudoroff pathway, whereas the Embden-Meyerhoff-Parnas pathway is employed for gluconeogenesis. The machinery of oxidative phosphorylation in H. elongata and C. salexigens differs greatly from that of non-halophilic organisms, and electron flow can occur from quinone to oxygen along four alternative routes. Two of these pathways via cytochrome bo' and cytochrome bd quinol oxidases seem to be upregulated in salt stressed cells. Among the most highly regulated genes in H. elongata and C. salexigens are those encoding chemotaxis and motility proteins, with genes for chemotaxis and flagellar assembly severely downregulated at low salt concentrations. We also compared transcripts at low and high-salt stress (low growth rate) with transcripts at optimal salt concentration and found that the majority of regulated genes were down-regulated in stressed cells, including many genes involved in carbohydrate metabolism, while ribosome synthesis was up-regulated, which is in contrast to what is known from non-halophiles at slow growth. Finally, comparing the acidity of the cytoplasmic proteomes of non-halophiles, extreme halophiles and moderate halophiles suggests adaptation to an increased cytoplasmic ion concentration of H. elongata. Taken together, these results lead us to propose a model for salt tolerance in H. elongata where ion accumulation plays a greater role in salt tolerance than previously assumed.
Numerous non-native tree species are given attention with respect to the reforestation of calamity areas in Europe. Among them, several species may form durable wood which can be used for outdoor applications, but differences in wood durability are expected between original and European growth sites. This study aimed at examining the biological durability against wooddestroying fungi and water permeability of German-grown Dawn redwood (Metasequoia glyptostroboides) and Port Orford cedar (Chamaecyparis lawsoniana). The heartwood of both wood species was assigned to durability class 4 (DC 4, less durable) in soil contact and DC 1–4 (very to less durable) against wood-destroying basidiomycetes. However, according to the Meyer-Veltrup model, their material resistance dose was notably higher compared to the reference species Norway spruce (Picea abies), and the resulting service life of above ground structures should be a multiple of the reference.
One criterion to evaluate the odour of a sample is perceived
intensity П which is evaluated with the aid of a comparative scale. The procedure is well accepted but also time consuming and extensive. The study should help simplify the testing procedure by asking the panel members to only indicate whether a sample is perceived as less to equally intense or of greater intensity in comparison to a given acetone concentration of 7 pi on the comparative scale. In Germany a value of 7 pi is required for products to be suitable for the indoor use. The results show that the simplified test is basically suitable.
The diversity of fused filament fabrication (FFF) filaments continues to grow rapidly as the popularity of FFF-3D desktop printers for the use as home fabrication devices has been greatly increased in the past decade. Potential harmful emissions and associated health risks when operating indoors have induced many emission studies. However, the lack of standardization of measurements impeded an objectifiable comparison of research findings. Therefore, we designed a chamber-based standard method, i.e., the strand printing method (SPM), which provides a standardized printing procedure and quantifies systematically the particle emission released from individual FFF-3D filaments under controlled conditions. Forty-four marketable filament products were tested. The total number of emitted particles (TP) varied by approximately four orders of magnitude (1E9 ≤ TP ≤ 1E13), indicating that origin of polymers, manufacturer-specific additives, and undeclared impurities have a strong influence. Our results suggest that TP characterizes an individual filament product and particle emissions cannot be categorized by the polymer type (e.g., PLA or ABS) alone. The user's choice of a filament product is therefore decisive for the exposure to released particles during operation. Thus, choosing a filament product awarded for low emissions seems to be an easily achievable preemptive measure to prevent health hazards.
Geosynthetic materials are applied in measures for coastal protection. Weathering or any damage of constructions, as shown by a field study in Kaliningrad Oblast (Russia), could lead to the littering of the beach or the sea (marine littering) and the discharge of possibly harmful additives into the marine environment. The ageing behavior of a widely used geotextile made of polypropylene was studied by artificial accelerated ageing in water-filled autoclaves at temperatures of 30 to 80° C
and pressures of 10 to 50 bar. Tensile strength tests were used to evaluate the progress of ageing, concluding that temperature rather than pressure was the main factor influencing the ageing of geotextiles. Using a modified Arrhenius equation, it was possible to calculate the half-life for the loss of 50% of the strain, which corresponds to approximately 330 years.
DHN (1,8-dihydroxynaphthalene) melanin is produced by different Ascomycetes via slightly differing biosynthetic routes. The polyketide synthases (PKS) release the heptaketide YWA1, the hexaketide AT4HN or the pentaketide T4HN. The first two products are deacetylated by ‘yellowish-green’ hydrolases to T4HN, and T4HN is further converted by a core set of enzymes to DHN. Final polymerization steps are accomplished by multicopper oxidases (MCOs). The involved genes are tightly clustered, partially clustered or widely distributed in the genomes of DHN melanin-producing fungi. DHN melanogenesis is often regulated in a spatial and temporal fashion resulting e.g. in melanized reproduction, survival and/or infection structures. In contrast, a polyphyletic group of Ascomycetes (microcolonial fungi/ black yeast) dwelling in hostile habitats such as bare rock surfaces in hot and cold deserts, exhibits constitutive melanogenesis. Here, we report on the identification and functional characterization of the DHN melanogenic genes of Knufia petricola as a representative of the Chaetothyriales, the sister order of the Eurotiales. Orthologs for all melanogenic genes were identified in the genome of K. petricola A95, including one gene encoding the polyketide synthase (KpPKS1), two genes encoding ‘yellowish-green’ hydrolases (KpYGH1,2), two genes encoding THN reductases (KpTHR1,2) and one gene encoding a scytalone dehydratase (KpSDH1). Ten genes encoding MCOs were identified, all MCOs are predicted to be secreted. The genes are not clustered in the genome but are highly expressed. Gene functions are studied by generation of single, double, and multiple deletion mutants in K. petricola and by heterologous expression in Saccharomyces cerevisiae for reconstruction of the synthesis pathway.
Mitogen-activated protein (MAP) kinases are highly conserved in animals, plants, and fungi and represent fundamental parts of signaling networks in eukaryotic cells. Black DHN (1,8-dihydroxynaphthalene) melanin and orange carotenoids are produced by many fungi in specific cell types/under certain conditions for protecting cells from abiotic and/or biotic stresses. Microcolonial black fungi constitutively produce DHN melanin, contain the conserved carotenogenic gene cluster, exhibit slow yeast-like growth and survive in extreme environments. Thus, the question arises to which extent pigment formation and responses mediated by the stress-activated MAP kinase module contribute to the observed extremotolerance. We address this question in the rock inhabitant Knufia petricola, the only representative of the extremotolerant black fungi that is genetically amendable. Here, the mutations of pks1, phs1 and both genes result in melanin-free (pink), carotenoid-free (black) and pigment-free (white) strains, respectively (Voigt Knabe et al. 2020, Sci Rep). The gene encoding the stress-activated MAP kinase was deleted in the wild-type and different pigment-deficient backgrounds. In addition, strains were generated that express a GFP-SAK1 fusion protein from the sak1 locus to follow the cytosolic/nuclear shuttling of SAK1 upon stress. Growth of the obtained single, double and triple deletion mutants was tested by dropping cell suspensions on solid media supplemented with different stress-inducing agents. The Δsak1 mutants show slightly reduced growth rates even under non-stress conditions and are hypersensitive to different stress conditions: reduced growth is observed on media inducing, for instance, osmotic, oxidative, membrane, and pH stress, and upon incubation at 30 °C (heat stress). Melanin-free Δsak1 mutants are more sensitive than black Δsak1 mutants to some but not all stress conditions, suggesting that melanin and the SAK1 pathway have complementary roles in protecting K. petricola from stress.
Microcolonial black fungi are inhabitants of exposed natural and man-made surfaces in all climate zones. Genetic studies are hampered by slow growth, lacking sexual cycles and difficulties to transform these fungi. Recently, we implemented CRISPR/Cas9-based genetic tools enabling efficient targeted mutations of the rock inhabitant Knufia petricola (Eurotiomycetes/Chaetothyriales) for studying stress responses, the unusual types of cell division, mineral weathering and symbiotic interactions with phototrophic microbes (Voigt, Knabe et al. 2020, Sci Rep; Erdmann et al. 2022, Front Fungal Biol). To further explore the genome of this fungus as representative of the polyphyletic group of black fungi and to assign functions to yet unknown genes, a forward genetics approach is aimed. We chose the two-component Activator/ Dissociation (Ac/Ds) transposon system from maize for generating a collection of insertional mutants by in-vivo mutagenesis. For the optimal use of this genetic tool, an inducible promoter for the expression of the Ac transposase and by this the regulatable transposition of the resistance cassette-containing Ds transposon is requested. However, endogenous promoters for nitrate assimilation and galactose catabolism that are often used in fungi for regulatable gene expression are not inducible by their substrates in K. petricola suggesting that the regulatory networks for nutrient acquisition differ significantly in the oligotrophic black fungi. Therefore, the metabolism-independent Tet-on system was adopted and validated using a Ptet::gfp construct. No GFP fluorescence was detected in absence of the inducer doxycycline (DOX) while fluorescence intensities increased with increasing inducer concentrations. Consequently, the Tet-on system is suitable for regulatable expression of endogenous and foreign genes in K. petricola.
Nine different bacterial isolates were recovered from landfills. Each isolate was obtained in pure culture. As a consortium, the bacteria degrade polyethylene. The complete genome sequence of strain G5 was determined by PacBio sequencing. Using the TYGS for taxonomic classification, strain G5 was assigned to the species Cupriavidus campinensis.
Antimicrobial resistance (AMR) is a global health problem with the environment being an important compartment for the evolution and transmission of AMR. Previous studies showed that de-novo mutagenesis and horizontal gene transfer (HGT) by conjugation or transformation – important processes underlying resistance evolution and spread - are affected by antibiotics, metals and pesticides. However, natural microbial communities are also frequently exposed to biocides used as material preservatives, but it is unknown if these substances induce mutagenesis and HGT. Here, we show that active substances used in material preservatives can increase rates of mutation and conjugation in a species- and substance-dependent manner, while rates of transformation are not increased. The bisbiguanide chlorhexidine digluconate, the quaternary ammonium compound didecyldimethylammonium chloride, the metal copper, the pyrethroid-insecticide permethrin, and the azole-fungicide propiconazole increase mutation rates in Escherichia coli, whereas no increases were identified for Bacillus subtilis and Acinetobacter baylyi.
Benzalkonium chloride, chlorhexidine and permethrin increased conjugation in E. coli. Moreover, our results show a connection between the RpoS-mediated general stress and the RecA-linked SOS response with increased rates of mutation and conjugation, but not for all biocides. Taken together, our data show the importance of assessing the contribution of material preservatives on AMR evolution and spread.
Biocides used as material preservatives are in contact with various environments during direct application or passive leaching from protected materials. Antimicrobial resistance (AMR) is a global health problem and the environment is an important compartment for the evolution and transmission of AMR. Soil is an environment with a large reservoir of natural microbial communities and antimicrobial resistance (AMR) genes. Those natural microbial communities are frequently exposed to biocides used as material preservatives. Previous studies have shown that antibiotics, metals and pesticides affect the underlying processes of resistance evolution and spread; namely de novo mutagenesis and horizontal gene transfer by conjugation and transformation in microbial communities. However, it is unknown if active substances used in material preservatives are involved in these processes. We show that biocides used as material preservatives affect rates of mutation and conjugation in microorganism in a species- and substance-dependent manner, while rates of transformation are not directly affected. Our data highlights the importance of assessing the contribution of material preservatives on AMR evolution and spread in the environment.
This study will present a new approach to distinguishing writing inks that have the same elemental compositions and visual appearances. The approach is based on displaying the intensity of elemental distributions as heat maps that represent data recorded with a scanning μX-ray fluorescence spectrometer. The heat maps present the data so as to facilitate digitally identifying and distinguishing between inks used to produce, correct, and reink two medieval Torah scrolls. As ritual objects, Torah scrolls had to be written in accordance with exacting standards that evolved over time. This requirement led to successive stages of modifications, sometimes over centuries. Both vitriolic and non-vitriolic inks used to modify Torah scrolls can be visually identical to each other. Furthermore, different non-vitriolic inks usually have an identical elemental composition. The solid material analysis evidence and its presentation as heat maps made it possible to discriminate between original and altered portions of text that in some cases would have been impossible. Our interdisciplinary work brought together conservation, material science, paleog-raphy, and philology to enable the identification of complex stratigraphy in multiple stages of production, correction, and reinking. ©2 0 2 2 Published by Elsevier Masson SAS.
Rock weathering is a key process in global elemental cycling. Life participates in this process with tangible consequences observed from the mineral interface to the planetary scale. Multiple lines of evidence show that microorganisms may play a pivotal—yet overlooked—role in weathering. This topic is reviewed here with an emphasis on the following questions that remain unanswered: What is the quantitative contribution of bacteria and fungi to weathering? What are the associated mechanisms and do they leave characteristic imprints on mineral surfaces or in the geological record? Does biogenic weathering fulfill an ecological function, or does it occur as a side effect of unrelated metabolic functions and biological processes? An overview of efforts to integrate the contribution of living organisms into reactive transport models is provided. We also highlight prospective opportunities to harness microbial weathering in order to support sustainable agroforestry practices and mining activities, soil remediation, and carbon sequestration.
Rock-inhabiting fungi are known to colonise air-exposed substrates like minerals, photovoltaic panels building facades and monuments, withstanding the various stresses these extreme habitats are known for. Here we show how both colonisation and stress resistance are linked to the properties of the fungal cell surface. By deleting genes involved in the synthesis of melanin and carotenoid pigments of the model rock-inhabiting fungus Knufia petricola via CRISPR-Cas and comparing the behaviour of the gene-deletion mutants with the wild type (WT), we studied the role of these genes in mineral colonisation and stress sensitivity. The extracellular polymeric substances (EPS) of biofilms of the WT and mutants were extracted, quantified and chemically characterised. We observed that the absence of melanin affected the quantity and composition of the produced EPS: melanin-deficient mutants synthesised more EPS containing fewer pullulan-related glycosidic linkages. Moreover, in mineral dissolution experiments, these mutants showed a lower ability to colonise the mineral olivine. We hypothesise that not melanin, but the pullulan-related linkages enabled the melanin-producing strains to attach more strongly to the mineral. Moreover, ICP-OES analysis of the aqueous mineral-derived solutes showed that biofilms of the K. petricola mutants which could attach were able to dissolve the olivine faster than those that could not. The same mutants were also characterised by their sensitivity to desiccation stress: only the mutant deficient in both melanin and carotenoid synthesis was more sensitive to desiccation compared to the WT, indicating that a combination of both pigments is critical to withstand desiccation. Overall, these results show the critical role of the cell surface in the specific capacities of rock-inhabiting fungi.
Generation of experimental uptake rates (UR) for > 70 VOCs (7d /100 μg m-3)
Application in German Environmental Survey – VOC exposure assessment
Assurance of transparency concerning UR generation and uncertainty creates basis for decision making and comparability of measurement results.
Exemplarily the uncertainty u(UR) of toluene UR was modelled and determined statistically with own laboratory data (relative standard deviation of actively sampled test gas atmosphere – RSDa and n = 5 exposed passive samplers – RSDp) in line with EN 838 as well as from variation of literature UR – RSD UR,lit.
Biocides used as material preservatives are in contact with various environments during direct application or passive leaching from protected materials. Antimicrobial resistance (AMR) is a global health problem and the environment is an important compartment for the evolution and transmission of AMR. Soil is an environment with a large reservoir of natural microbial communities and antimicrobial resistance (AMR) genes. Those natural microbial communities are frequently exposed to biocides used as material preservatives. Previous studies have shown that antibiotics, metals and pesticides affect the underlying processes of resistance evolution and spread; namely de novo mutagenesis and horizontal gene transfer by conjugation and transformation in microbial communities. However, it is unknown if active substances used in material preservatives are involved in these processes. We show that biocides used as material preservatives affect rates of mutation and conjugation in microorganism in a species- and substance-dependent manner, while rates of transformation are not directly affected. Our data highlights the importance of assessing the contribution of material preservatives on AMR evolution and spread in the environment.
Industrial-scale mechanical recycling of plastics has been established for years, but has technical and economic limits. Chemical recycling processes lead back to monomers or to the raw materials, so that in the end new goods can be produced for all areas of application of plastics. The variety of chemical recycling processes is large. The capacities of the plants are still low today. The profitability of the plants is strongly influenced by the price of oil; the profitability limit is currently between 50 and 60 US $ per barrel.
In industrialised countries more than 80% of the time is spent indoors. Products, such as building materials and furniture, emit volatile organic compounds (VOCs), which are therefore ubiquitous in indoor air. VOC in combination may, under certain environmental and occupational conditions, result in reported sensory irritation and health complaints. Emission concentrations can become further elevated in new or refurbished buildings where the rate of air exchange with fresh ambient air may be limited due to improved energy saving aspects. A healthy indoor environment can be achieved by controlling the sources and by eliminating or limiting the release of harmful substances into the air. One way is to use (building) materials proved to be low emitting. Meanwhile, a worldwide network of professional commercial and non-commercial laboratories performing emission tests for the evaluation of products for interior use has been established. Therefore, comparability of test results must be ensured. A laboratory’s proficiency can be proven by internal and external validation measures that both include the application of suitable emission reference materials (ERM). For the emission test chamber procedure according to EN 16516, no artificial ERM is commercially available. The EU-funded EMPIR project MetrIAQ aims to fill this gap by developing new and improved ERMs. The goal is to obtain a material with a reproducible and temporally constant compound release (less than 10% variability over 14 days). Different approaches, such as the impregnation of porous materials, are being tested. The generation as well as results of the most promising materials will be presented.
Evolution relies on the availability of genetic diversity for fitness-based selection. However, most deoxyribonucleic acid (DNA) viruses employ DNA polymerases (Pol) capable of exonucleolytic proofreading to limit mutation rates during DNA replication. The relative genetic stability produced by high-fidelity genome replication can make studying DNA virus adaptation and evolution an intensive endeavor, especially in slowly replicating viruses. Here, we present a proofreading-impaired Pol mutant (Y547S) of Marek’s disease virus that exhibits a hypermutator phenotype while maintaining unimpaired growth in vitro and wild-type (WT)-like pathogenicity in vivo. At the same time, mutation frequencies observed in Y547S virus populations are 2–5-fold higher compared to the parental WT virus. We find that Y547S adapts faster to growth in originally non-permissive cells, evades pressure conferred by antiviral inhibitors more efficiently, and is more easily attenuated by serial passage in cultured cells compared to WT. Our results suggest that hypermutator viruses can serve as a tool to accelerate evolutionary processes and help identify key genetic changes required for adaptation to novel host cells and resistance to antiviral therapy. Similarly, the rapid attenuation achieved through adaptation of hypermutators to growth in cell culture enables identification of genetic changes underlying attenuation and virulence, knowledge that could practically exploited, e.g. in the rational design of vaccines.
Deciphering microbiological influenced corrosion processes on steel with single cell-ICP-ToF-MS
(2022)
Microbiologically influenced corrosion (MIC) is a highly unpredictable process dictated by the environment, microorganisms, and the respective electron source. Interaction pathways between cells and the metal surface remain unclear. The development of this novel single cell-inductively coupled plasma-time of flight-mass spectrometry analytical method and a MIC-specific staining procedure facilitate the investigation of steel-MIC interactions. With this it is possible to analyze the multi-elemental fingerprint of individual cells. The detection method revealed elemental selectivity for the corrosive methanogenic archaeal strain Methanobacterium-affiliated IM1. The interface between material and environmental analysis thus receives special attention, e.g., when considering MIC on solid steel. Hence, the possible uptake of individual elements from different steel samples is investigated. Results showed the cells responded at a single-cell level to the different types of supplemented elements and displayed the abilities to interact with chromium, vanadium, titanium, cobalt, and molybdenum from solid metal surfaces. The information obtained will be used in the future to elucidate underlying mechanisms and develop possible material protection concepts, thus combining modern methods of analytical sciences with materials research.
References.
Quaternary ammonium compounds (QACs) are widely used as active agents in disinfectants, antiseptics, and preservatives. Despite being in use since the 1940s, there remain multiple open questions regarding their detailed mode-of-action and the mechanisms, including phenotypic heterogeneity, that can make bacteria less susceptible to QACs. To facilitate studies on resistance mechanisms towards QACs, we synthesized a fluorescent quaternary ammonium compound, namely N-dodecyl-N,N-dimethyl-[2-[(4-nitro-2,1,3-benzoxadiazol-7-yl)amino]ethyl]azanium-iodide (NBD-DDA). NBD-DDA is readily detected by flow cytometry and fluorescence microscopy with standard GFP/FITC-settings, making it suitable for molecular and single-cell studies. As a proof-of-concept, NBD-DDA was then used to investigate resistance mechanisms which can be heterogeneous among individual bacterial cells. Our results reveal that the antimicrobial activity of NBD-DDA against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa is comparable to that of benzalkonium chloride (BAC), a widely used QAC, and benzyl-dimethyl-dodecylammonium chloride (BAC12), a mono-constituent BAC with alkyl-chain length of 12 and high structural similarity to NBD-DDA. Characteristic time-kill kinetics and increased tolerance of a BAC tolerant E. coli strain against NBD-DDA suggest that the mode of action of NBD-DDA is similar to that of BAC. As revealed by confocal laser scanning microscopy (CLSM), NBD-DDA is preferentially localized to the cell envelope of E. coli, which is a primary target of BAC and other QACs. Leveraging these findings and NBD-DDA‘s fluorescent properties, we show that reduced cellular accumulation is responsible for the evolved BAC tolerance in the BAC tolerant E. coli strain and that NBD-DDA is subject to efflux mediated by TolC. Overall, NBD-DDA’s antimicrobial activity, its fluorescent properties, and its ease of detection render it a powerful tool to study resistance mechanisms of QACs in bacteria and highlight its potential to gain detailed insights into its mode-of-action.
Microbiologically influenced corrosion (MIC) is a highly unpredictable process dictated by the environment, microorganisms, and the respective electron source. Interaction pathways between cells and the metal surface remain unclear. The development of this novel single cell-inductively coupled plasma-time of flight-mass spectrometry analytical method and a MIC-specific staining procedure facilitate the investigation of steel-MIC interactions. With this it is possible to analyze the multi-elemental fingerprint of individual cells. The detection method revealed elemental selectivity for the corrosive methanogenic archaeal strain Methanobacterium-affiliated IM1. The interface between material and environmental analysis thus receives special attention, e.g., when considering MIC on solid steel. Hence, the possible uptake of individual elements from different steel samples is investigated. Results showed the cells responded at a single-cell level to the different types of supplemented elements and displayed the abilities to interact with chromium, vanadium, titanium, cobalt, and molybdenum from solid metal surfaces. The information obtained will be used in the future to elucidate underlying mechanisms and develop possible material protection concepts, thus combining modern methods of analytical sciences with materials research.
Antimicrobial resistance (AMR) is a global health problem with the environment being an important compartment for the evolution, selection and transmission of AMR. These processes are impacted by pollution with antibiotics. However, biocides used as disinfectants and material preservatives are major pollutants by far excceding the market for antibiotics in terms of mass. Our work shows that biocides have the potential to affect evolutionary processes towards AMR by increasing the rates of de-novo mutation and conjugation. These effects depend on the species and biocidal substance. Importantly, chlorhexidine and quaternary ammonium compounds (QACs) affect rates of mutation and conjugation at environmentally relevant concentrations in E. coli. Moreover, our results show a connection between the RpoS-mediated general stress and the RecA-linked SOS response with increased rates of mutation and conjugation, but not for all biocides. Furthermore, our work highlights the potential of biocides to contribute to selection and transmission of AMR. We show that the application of biocides, especially QAC disinfectants, leads to the rapid evolution of tolerance (i.e. increased survival) in adaptive laboratory evolution (ALE) experiments. The evolved tolerant strains have a selective advantage in the presence of environmentally-relevant concentrations of antibiotics, which could lead to the stabilization of biocide tolerance in environments where biocides and antibiotics co-occur (e.g. wastewater, animal stables). ALE experiments with biocide tolerant strains indicate a decreased evolvability of resistance to antibiotics. Taken together, our work shows the importance of assessing the contribution of biocides on evolution, selection and transmission of AMR in the environment.
BIOCIDE
(2022)
Conventional phosphate fertilizers are usually highly water-soluble and rapidly solubilize when moistened by the soil solution. However, if this solubilization is not in alignment with plants demand, P can react with the soil colloidal phase, becoming less available over time. This is more pronounced in acidic, oxidic tropical soils, with
high P adsorption capacity, reducing the efficiency of P fertilization. Furthermore, these fertilizers are derived from phosphate rock, a non-renewable resource, generating an environmental impact. To assess these concerns, waste-recycled P sources (struvite, hazenite and AshDec®) were studied for their potential of reducing P Fixation by the soil and improving the agronomic efficiency of the P fertilization. In our work, we compared the solubilization dynamics of struvite, hazenite, AshDec® to triple superphosphate (TSP) in a sandy clay loam Ferralsol, as well as their effect on solution pH and on soil P pools (labile, moderately-labile and non-labile) via an incubation experiment. Leaching columns containing 50 g of soil with surface application of 100 mg per column (mg col 1) of P from each selected fertilizer and one control (nil-P) were evaluated for 60 days. Daily leachate samples from the column were analyzed for P content and pH. Soil was stratified in the end and submitted to P
fractionation. All results were analyzed considering p < 0.05. Our findings showed that TSP and struvite promoted an acid P release reaction (reaching pHs of 4.3 and 5.5 respectively), while AshDec® and hazenite reaction was alkaline (reaching pHs of 8.4 and 8.5 respectively). Furthermore, TSP promoted the highest P release among all sources in 60 days (52.8 mg col 1) and showed rapid release dynamic in the beginning, while struvite and hazenite showed late release dynamics and lower total leached P (29.7 and 15.5 mg col 1 P respectively). In contrast, no P-release was detected in the leachate of the AshDec® over the whole trial period. Struvite promoted
the highest soil labile P concentration (7938 mg kg 1), followed by hazenite (5877 mg kg 1) and AshDec® (4468 mg kg 1), all higher than TSP (3821 mg kg 1), while AshDec® showed high moderately-labile P (9214 mg kg 1), reaffirming its delayed release potential.
Honeybee symbionts, predominantly bacteria, play important roles in honeybee health, nutrition, and pathogen protection, thereby supporting colony health. On the other hand, fungi are often considered indicators of poor bee health, and honeybee microbiome studies generally exclude fungi and yeasts. We hypothesized that yeasts may be an important aspect of early honeybee biology, and if yeasts provide a mutual benefit to their hosts, then honeybees could provide a refuge during metamorphosis to ensure the presence of yeasts at emergence. We surveyed for yeast and fungi during pupal development and metamorphosis in worker bees using fungal-specific quantitative polymerase chain reaction (qPCR), next-generation sequencing, and standard microbiological culturing. On the basis of yeast presence in three distinct apiaries and multiple developmental stages, we conclude that yeasts can survive through metamorphosis and in naïve worker bees, albeit at relatively low levels. In comparison, known bacterial mutualists, like Gilliamella and Snodgrassella, were generally not found in pre-eclosed adult bees. Whether yeasts are actively retained as an important part of the bee microbiota or are passively propagating in the colony remains unknown. Our demonstration of the constancy of yeasts throughout development provides a framework to further understand the honeybee microbiota.
Future nutrient recovery from sewage sludge regarding three different scenarios - German case study
(2022)
Agricultural sewage sludge utilization becomes less important in Germany. In 2017, new fertilizer and waste laws caused the agricultural sewage sludge utilization to collapse by more than a quarter. From 2029, German wastewater treatment plants (WWTPs) must recover phosphorus (P) from sewage sludge if it contains more than 2 wt % P. Agricultural utilization will be prohibited for large WWTPs >100,000 population equivalents (pe) from 2029 and >50,000 pe from 2032. In Germany, each federal state must annually report amounts and quality of agriculturally utilized sewage sludge which was 16% of the total disposal in 2019. The reports of 10 states were evaluated for 2016 and 2017 representing approx. 60% of the total agriculturally used sludge volume. In 2016, 60% of the WWTPs’ sludges exceeded the recovery limit of 2 wt % P which is 70% of the amount of sludge and 85% of the phosphorus load. Other nutrients are not affected by the recovery obligation. However, many P recovery processes recover other nutrients, too. Considering three different scenarios for future German sewage sludge disposal shows that 70–77% of the P load in sewage sludge will probably be recovered in the future. At the same time, this applies for about 0–16% nitrogen, 36–52% of calcium, 31–53% of potassium, and 40–52% of magnesium. However, these recovered nutrients loads can substitute only 1% or less of the commercial fertilizer demand except from phosphorus which is up to 43% of the demand.
The database gives information on the contamination of the shore of the South-Eastern Baltic with the debris of geosynthetic materials for the period 2018–2020. This new type of coastal pollution enters the natural environment due to the destruction of coastal protection structures and construction activities. The database contains sections:
(1) a list of types of geosynthetic material residues, their photographic images and photographs illustrating examples of finds in natural conditions
[1 List_geosynthetic_debris_SEB],
(2) monitoring data on the contamination of the beach strip with the debris of geotextiles, braids from gabions, geocontainers (big bags), geocells and geogrids for the beaches of the South-Eastern Baltic for the period 2018–2020
[2 Monitoring_geosynthetic_debris_SEB];
(3) statistical distributions of the found geosynthetic debris by size
[3 Scales_geosynthetic_debris_SEB] and (4) results of test surveys on the shores of Lithuania and Poland adjacent to Kaliningrad Oblast.
All data refer to the beaches of the Kaliningrad Oblast (Russia), including the Russian parts of the Vistula and Curonian Spits, but also contains information on a one-time assessment of the pollution of the beaches of the adjacent territories: the Polish shore from the Poland-Russia border on the Vistula Spit to the mouth of the Vistula River, the Lithuanian shore from the border Lithuania-Russia on the Curonian Spit to the border of Latvia-Lithuania. Materials were collected during field surveys within the ERANET-RUS_Plus joint project EI-GEO, ID 212 (RFBR 18-55-76002 ERA_a, BMBF 01DJ18005).
The pressing need for novel bioproduction approaches faces a limitation in the number and type of molecules accessed through synthetic biology. Halogenation is widely used for tuning physicochemical properties of molecules and polymers, but traditional halogenation chemistry often lacks specificity and generates harmful by-products. Here, we pose that deploying synthetic metabolism tailored for biohalogenation represents an unique opportunity towards economically attractive and environmentally friendly organohalide production. On this background, we discuss growth-coupled selection of functional metabolic modules that harness the rich repertoire of biosynthetic and biodegradation capabilities of environmental bacteria for in vivo biohalogenation. By rationally combining these approaches, the chemical landscape of Living cells can accommodate bioproduction of added-value organohalides which, as of today, are obtained by traditional chemistry.
The diffusive gradients in thin-films (DGT) technique shows in many publications a superior correlation to the amount of plant-available phosphorus (P) in soil. However, this technique cannot give information on the plant-available P species in soil. Therefore, we combined DGT with solution 31P nuclear magnetic resonance (NMR) spectroscopy. This was achieved by using a modified DGT device in which the diffusive layer had a larger pore size, the binding layer incorporated an adsorption material with a higher capacity, and the device had a larger exposure area. The spectroscopic investigation was undertaken after elution of the deployed DGT binding layer in a NaOH solution. Adsorption tests using solutions of known organic P compounds showed that a sufficient amount of these compounds could be adsorbed on the binding layer in order for them to be analyzed by solution 31P NMR spectroscopy. Furthermore, various intermediates of the hydrolysis of trimetaphosphate in soil could be also analyzed over time.
Dust deposition is an important source of phosphorus (P) to many ecosystems. However, there is little evidence of dust-derived P-containing minerals in soils. Here we studied P forms along a well-described climatic gradient on Hawaii, which is also a dust deposition gradient. Soil mineralogy and soil P forms from six sites along the climatic gradient were analyzed with bulk (X-ray diffraction and P K-edge X-ray absorption near edge structure)
and microscale (X-ray fluorescence, P K-edge X-ray absorption near edge structure, and Raman) analysis methods. In the wettest soils, apatite grains ranging from 5 to 30 μm in size were co-located at the micro-scale with quartz, a known continental dust indicator suggesting recent atmospheric deposition. In addition to colocation with quartz, further evidence of dust-derived P included backward trajectory modeling indicating that dust particles could be brought to Hawaii from the major global dust-loading areas in central Asia and northern Africa. Although it is not certain whether the individual observed apatite grains were derived from long-distance transport of dust, or from local dust sources such as volcanic ash or windblown fertilizer, these observations offer direct evidence that P-containing minerals have reached surface layers of highly-weathered grassland soils
through atmospheric deposition.
Black fungi also called black yeasts, rock-inhabiting fungi or microcolonial fungi are a group of Ascomycetes [Eurotiomycetes, Arthoniomycetes and Dothideomycetes] that exhibit high stress tolerance, yeast‑like or meristematic growth, and constitutive 1,8-dihydroxynaphthalene (DHN) melanin formation. They dominate a range of hostile natural and man‑made environments – from desert rocks and salterns to dishwashers, roofs, and solar panels. Due to their slow growth and the lack of sexual cycles and genetic tools, the underlying mechanisms of black fungi’s phenotypic traits have remained largely unexplored. We consider the rock inhabitant K. petricola [Eurotiomycetes, Chaetothyriales] a suitable model for studying the phenotypic characteristics of black fungi. With K. petricola the regulation of pigment synthesis, general stress responses and the unusual modes of cell division can be dissected by advanced reverse and forward genetics approaches. The genome of K. petricola strain A95 was sequenced using a combination of short high quality Illumina reads and long PacBio reads. The final assembly consists of twelve contigs: five complete chromosomes and six contigs with one telomer each. Gene annotation supported by transcriptomics and proteomics data was manually curated. Recently, we developed a set of genetic tools to manipulate the genome for analyzing gene functions and studying the cell biology. This set includes CRISPR/Cas9-based genome editing and live-cell imaging using genetically encoded fluorescent proteins, as well as protocols for -omics approaches and for simulation of mineral weathering in the laboratory. Mutants defective in DHN melanogenesis, carotenogenesis or both processes are currently studied to elucidate the role of these protective pigments in tolerance of natural and man-made stresses, weathering of olivine, penetration of marble, and adhesion to surfaces. Further, the established protocols and knowledge gained from K. petricola form a starting point for making other extremotolerant black fungi accessible to genetic manipulation.
Black microcolonial fungi represent a group of ascomycetes with similar adaptations for existing in natural and anthropogenically created extreme habitats. They exhibit slow yeast-like or meristematic growth, do not form specialized reproduction structures and accumulate the black pigment 1,8-dihydroxynaphthalene (DHN) in the multilayered cell walls. We chose the rock inhabitant Knufia petricola of the Chaetothyriales as a representative for developing methods for genetic manipulation, simulation of mineral weathering and study of symbiotic interactions. Here, we report on the expansion of the genetic toolkit by more efficient multiplex CRISPR/Cas9 using a plasmid-based system for expression of Cas9 and multiple sgRNAs and three additional resistance selection markers. The targeted integration of expression constructs by replacement of essential genes for pigment synthesis allows for an additional color screening of the transformants. The black-pink screening due to the elimination of pks1 (melanin) was applied for promoter studies using GFP fluorescence as reporter, while the black-white screening due to the concurrent elimination of pks1 (melanin) and phs1 (carotenoids) was used to identify transformants that contain the two expression constructs for co-localization or bimolecular fluorescence complementation (BiFC) studies. In addition, two intergenic regions (igr1, igr2) were identified in which expression constructs can be inserted without causing obvious phenotypes. Plasmids of the pNXR-XXX series (Schumacher, 2012) and new compatible entry plasmids were used for fast and easy generation of expression constructs and are suitable for use in other fungal systems as well.
Pseudomonas fluorescens (Gram-negative) bacteria purchased from Leibniz Institute DSMZ-German Collection of Microorganisms and Cell Cultures were analyzed using high-resolution x-ray photoelectron spectroscopy at near ambient pressure conditions (NAP-XPS), 1500 Pa water vapor atmosphere. Fresh layers of P. fluorescence bacteria were grown on Luria Broth agar plates. Bacteria were taken from the agar plate with a sterile spatula and gently spread on a Si-wafer piece for NAP-XPS analysis. The NAP-XPS spectra of the bacterial envelope of P. fluorescence were obtained using monochromatic Al Kα radiation and include a survey scan and high-resolution spectra of C 1s, N 1s, P 2p, and O 1s as well. The presentation of the C 1s high-resolution spectrum includes the results of peak fitting analysis.
Basic oxygen furnace slag (BOFS) is a by-product of steelmaking of which about 10.4 Mt are produced annually in the EU. BOFS is mostly used in road construction, earthwork and hydraulic engineering. However, in this use, the iron bound in BOFS is lost and the opportunity to produce higher value products from BOFS is forgone.
In recent decades, many researchers have investigated a thermochemical process to reduce iron oxides to metallic iron in molten BOFS. The metallic iron formed separates from the reduced slag due to its higher density and can be recovered. An advantage of this process is that simultaneously the chemical composition of the reduced slag is adapted to that of the Portland cement clinker and the hydraulic reactive mineral alite is formed.
In this study, BOFS was reduced in a small-scale electric arc furnace using petrol coke as reducing agent, and the hydraulic properties of the reduced, low-iron BOFS were investigated. Despite a chemical and mineralogical composition similar to that of Portland cement clinker, the reduced BOFS produced less heat of hydration, and its reaction was delayed compared to Portland cement. However, the addition of gypsum, as is also done in cement production from Portland cement clinker, has been found to accelerate the hydration rate of reduced BOFS.
Further research to improve the hydraulic properties of the reduced slag is essential. If successful, the production of a hydraulic binder and crude iron from BOFS could have economic and ecological benefits for both the cement and steel industry.
Sugarcane bagasse is commonly combusted to generate energy. Unfortunately, recycling strategies rarely consider the resulting ash as a potential fertilizer. To evaluate this recycling strategy for a sustainable circular economy, we characterized bagasse ash as a fertilizer and measured the effects of co-gasification and co-combustion of bagasse with either chicken manure or sewage sludge: on the phosphorus (P) mass fraction, P-extractability, and mineral P phases. Furthermore, we investigated the ashes as fertilizer for soybeans under greenhouse conditions. All methods in combination are reliable indicators helping to assess and predict P availability from ashes to soybeans. The fertilizer efficiency of pure bagasse ash increased with the ash amount supplied to the substrate. Nevertheless, it was not as effective as fertilization with triple-superphosphate and K<sub>2</sub>SO<sub>4</sub>, which we attributed to lower P availability. Co-gasification and co-combustion increased the P mass fraction in all bagasse-based ashes, but its extractability and availability to soybeans increased only when co-processed with chicken manure, because it enabled the formation of readily available Ca-alkali phosphates. Therefore, we recommend co-combusting biomass with alkali-rich residues to increase the availability of P from the ash to plants.
The BAM Data Store
(2023)
As a partner in several NFDI consortia, the Bundesanstalt für Materialforschung und -prüfung (BAM, German federal institute for materials science and testing) contributes to research data standardization efforts in various domains of materials science and engineering (MSE). To implement a central research data management (RDM) infrastructure that meets the requirements of MSE groups at BAM, we initiated the Data Store pilot project in 2021. The resulting infrastructure should enable researchers to digitally document research processes and store related data in a standardized and interoperable manner. As a software solution, we chose openBIS, an open-source framework that is increasingly being used for RDM in MSE communities.
The pilot project was conducted for one year with five research groups across different organizational units and MSE disciplines. The main results are presented for the use case “nanoPlattform”. The group registered experimental steps and linked associated instruments and chemicals in the Data Store to ensure full traceability of data related to the synthesis of ~400 nanomaterials. The system also supported researchers in implementing RDM practices in their workflows, e.g., by automating data import and documentation and by integrating infrastructure for data analysis.
Based on the promising results of the pilot phase, we will roll out the Data Store as the central RDM infrastructure of BAM starting in 2023. We further aim to develop openBIS plugins, metadata standards, and RDM workflows to contribute to the openBIS community and to foster RDM in MSE.
The increasing use of carbon fiber reinforced polymers (CFRP), as lightweight materials essential for the transformation, demands for a safe treatment option of carbon fiber (CF) containing waste streams. Because of their low reactivity towards oxidation processes, CF can neither be treated in a conventional nor hazardous waste incineration plant. Even the extremely high temperature in a cement rotary kiln does not lead to full conversion. To increase the sustainability of CF, other processes need to be investigated. Opening other reaction pathways, using CF waste streams as secondary resource in pyrometallurgy to replace fossil carbon, can be a solution for a safe and sustainable treatment. After first small scale experiments, CF containing waste streams were used as reductant in a semi-industrial scale electric arc furnace (EAF). First results and impressions are presented.
The increasing use of carbon fiber reinforced polymers (CFRP), as lightweight materials essential for the transformation, demands for a safe treatment option of carbon fiber (CF) containing waste streams. Because of their low reactivity towards oxidation processes, CF can neither be treated in a conventional nor hazardous waste incineration plant. Even the extremely high temperature in a cement rotary kiln does not lead to full conversion. To increase the sustainability of CF, other processes need to be investigated. Opening other reaction pathways, using CF waste streams as secondary resource in pyrometallurgy to replace fossil carbon, can be a solution for a safe and sustainable treatment. To support the industrial application, experiments on different scales were conducted. Here, results of thermochemical investigations, reactivity studies, crucible experiments and pilot plat trials are reported.
Lightweighting as a cross-cutting technology contributes significantly to achieve the European Green Deal goals. Based on, but not limited to, advanced materials and production technologies, the demand for natural resources and CO2 emmissions are reduced by lightweighting during production, as well as use phase. Therefore, lightweighting is a crucial transformation technology assisting in decoupling economic growth from resource consumption. In this manner, lightweighting contributes significantly as a key technology of relevance for many industrial sectors such as energy, mobility, and infrastructure, towards resource efficiency, climate action and economic strength, as well as a resilient Europe. To strengthen international partnerships, addressing global issues of today at the edge of science with high performance lightweight material based on carbon fibers, an overview about the BAM expertise in carbon fiber reinforced materials is given.
Materials that support natural biodiversity on their surfaces can compensate for human activities that have a negative impact on nature and thus contribute to a carbon-neutral and nature-positive world. Specifically designing bioreceptive materials which favor the growth of biofilms on their surface is an approach complementing conventional, macroscopic green façades. But what exactly characterizes a bioreceptive substrate and how do biofilm and substrate interact? How and why does a spontaneous colonization and the formation of biofilms take place? What are biofilms and how can they be established in a laboratory setting? How can this existing knowledge be transferred to the artificial stone concrete so that this material can be tuned to increase (or decrease) its bioreceptivity?
This review paper aims at summarizing the existing state of knowledge on bioreceptive concrete and pointing out inconsistencies and contradictions which can only be removed by more interdisciplinary research in the field.
Volatile organic compounds (VOCs) emitted by furniture and
building materials can cause health issues. For an
improvement of indoor air quality low emitting materials
should be used. Quality assurance and –control (QA/QC)
measures require an emission reference material (ERM) with a
predictable emission rate of VOCs. The idea is to use porous
materials as ERM, which store the VOCs inside their pores and
emit them constantly.
Colours on East Asian Maps
(2023)
Maps and colours have a close connection. Drawn or printed in black on white, subsequently added colours enhance maps with additional information. Colours were not just there to improve maps aesthetically, but they regulated how they were read and thus reinforced their meanings, significances and ideas. Colour is an important key to a more precise understanding of the map’s purposes and uses; moreover, colours are also an important aspect of a map’s materiality. The material scientific analysis makes it possible to find out more about the making of colours and the process of colouring maps. By skillfully deploying colours, map colourists were able to create mimetic representations of nature or codify information in an abstract form. The use of colours involved many considerations as to the materials. ‘Reading’ colours in this way gives a glimpse into the social lives of mapmakers as well as map users and reveals the complexity of the historical and social context in which maps were produced and how the maps were actually made. Within the scope of the three-year joint research project Coloured Maps (2018–2021), we undertook an in-depth and systematic study of hand-drawn and hand-coloured maps from East Asia in the Museum am Rothenbaum (MARKK) in Hamburg and produced between the seventeenth and twentieth centuries.
With a multi-perspective approach and transdisciplinary methods (humanities and the sciences), we were able to pool and compare the research results from different fields of research on Asian maps. The aim of this publication is to provide a first general overview of the subject of colours on maps in East Asia in the period from the seventeenth to the early twentieth century and to stimulate further research on the topic.
Harnessing near-chromosome level quality genomes to explore the evolution of termite immunity
(2023)
The phylogeny of the Blattodea boasts a wide degree of sociality spanning from solitary cockroaches to advanced ecosystem-dominating higher termite societies. The emergence of sociality in termites was associated with the acquisition of a diverse range of social structures. Previous work has found evidence for a caste-specific social defence system in termites leading to an immune system that may favour group over individual defence. While preliminary work suggests a correlation between social transitions and a reduction of immune gene family diversity, the lack of available high-quality termite genomes hampers complete knowledge of the true diversity of immune gene evolution across termite phylogeny. Here, we report on the sequencing and near-chromosome level assembly of 48 high-quality long-read-based genomes across major termite and cockroach sister-branch lineages. We investigate the diversity and evolutionary history of immune genes across genomes, focusing particular attention on correlations between immune gene evolution and transitions in sociality over termite phylogeny.
Insecta is one of the most diverse phyla in the animal kingdom, with species living in all types of habitats encountering an even greater diversity of pathogens and parasites. Defence strategies against such harmful threats led to a variety of molecular mechanisms, ecological shifts, and genetic innovations. Gene families underlying the molecular basis of the immune responses have evolved within the boundaries given by the species ecology. Here, we explore the evolution of some emblematic immune gene families throughout the Insecta phylum shedding light on remarkable genetic events such as gene duplication or gene loss. We followed a workflow based on the Hidden Markov model to search for immune genes in 55 high-quality genomes of insects. We highlight the emergence of group defence in social species as an ecological shift that released selection pressure on immune gene families notably in Blattodea. Further, we draw attention to certain gene families and the link between their diversity and the specificities of the species’ microbiota. Overall, we report data on immune gene diversity in insects.
Adipokinetic hormone (AKH) is a neuropeptide produced in the insect corpora cardiaca that plays an essential role in mobilizing carbohydrates and lipids from the fat body to the hemolymph. AKH acts by binding to a rhodopsin-like G protein-coupled receptor (GPCR), the adipokinetic hormone receptor (AKHR). In this study, we tackle AKH ligand and receptor gene evolution as well as the evolutionary origins of AKH gene paralogues from the order Blattodea (termites and cockroaches). Phylogenetic analyses of AKH precursor sequences point to an ancient AKH gene duplication event in the common ancestor of Blaberoidea, yielding a new group of putative decapeptides. In total, 16 different AKH peptides from 90 species were obtained. Two octapeptides and seven putatively novel decapeptides are predicted for the first time. AKH receptor (AKHRs) sequences from 18 species, spanning solitary cockroaches and subsocial woodroaches as well as lower and higher termites, were subsequently acquired using classical molecular methods and in silico approaches employing transcriptomic data. Aligned AKHR open reading frames revealed 7 highly conserved transmembrane regions, a typical arrangement for GPCRs. Phylogenetic analyses based on AKHR sequences support accepted relationships among termite and cockroach lineages to a large extent, while putative post-translational modification sites do not greatly differ between solitary and subsocial roaches and social termites. This study provides important information not only for AKH and AKHR functional research but also for further analyses interested in their development as potential candidates for biorational pest control agents against invasive termites and cockroaches.
The phylogeny of the Blattodea boasts a wide degree of sociality spanning from solitary cockroaches to advanced ecosystem-dominating higher termite societies. The emergence of sociality in the termites was associated with the acquisition of a diverse range of social structures and differential expression of specific gene network. Previous work has found evidence for a caste-specific social defence system in termites leading to an immune system that may favour group over individual defence. While preliminary work suggests a correlation between social transitions and a reduction of immune gene family diversity, the lack of available high-quality termite genomes hampers complete knowledge of the true diversity of immune gene evolution across termite phylogeny. Here, we report on the sequencing and assembly of 50 high-quality long-read-based genomes and 180 caste- and sex-specific brain transcriptomes across major termite and cockroach sister-branch lineage. We investigate the diversity and evolutionary history of immune genes across genomes, and the potential gene networks that have evolved with the emergence of termite sociality and some aspect of immune related behaviours.
Bacterial adhesion on surfaces of medical, water and food applications may lead to infections, water or food spoilage and human illness. In comparison to traditional static and macro flow chamber assays for biofilm formation studies, microfluidic chips allow in situ monitoring of biofilm formation under various flow regimes, have better environment control and smaller sample requirements.
In this work, a novel microfluidic platform is developed to investigate biofilm adhesion under precisely controlled bacteria concentration, temperature, and flow conditions. This platform central unit is a single-inlet microfluidic flow cell with a 5 mm wide chamber designed and tested to achieve ultra-homogenous flow in the central area of chamber. Within this area, defined microstructures are integrated that will disturb the homogeneity of the flow, thus changing bacterial adhesion pattern.
Here we present the monitoring of bacterial biofilm formation in a microfluidic chip equipped with a microstructure known as micro-trap. This feature is based on a 3D bacteria trap designed by Di Giacomo et al. and successfully used to sequester motile bacteria.
At first, fluorescent particles similar in size to Escherichia coli (E. coli) are used to simulate bacteria flow inside the flow cell and at the micro-trap. The turbulences induced by the trap are analyzed by imaging and particle tracking velocimetry (PTV). Secondly, the model strain E. coli TG1, ideal and well described for biofilm studies, is used to analyze biofilm formation in the micro-trap. Therefore, a stable fluorescent strain E. coli TG1-MRE-Tn7-141 is constructed by using Tn7 transposon mutagenesis according to the method described by Schlechter et al. Sequestering of E. coli cells within the micro-trap was followed using epifluorescence microscopy.
The novel microfluidic platform shows great potential for assessment of bacterial adhesion under various flow regimes. The performance of structural feature with respect to the generation of turbulences that promote or reduce bacterial adhesion can be systematically examined.
The combination of flow analysis and fluorescent strain injection into the microfluidic chip shows that the micro-trap is useful for capturing bacteria at defined positions and to study how flow conditions, especially micro-turbulences, can affect biofilm formation. It represents a powerful and versatile tool for studying the relation between topography and bacteria adhesion.
Defensive behavior is linked to altered surface chemistry following infection in a termite society
(2023)
The care-kill response determines whether a sick individual will be treated or eliminated from an insect society, but little is known about the physiological underpinnings of this process. We exploited the stepwise infection dynamics of an entomopathogenic fungus in a termite to explore how care-kill transitions occur, and identify the chemical cues behind these shifts. We found collective responses towards pathogen-injected individuals to vary according to severity and timing of pathogen challenge, with elimination, via cannibalism, occurring sooner in response to a severe active infection. However, injection with inactivated fungal blastospores also resulted in increased albeit delayed cannibalism, even though it did not universally cause host death. This indicates that the decision to eliminate an individual is triggered before pathogen viability or terminal disease status has been established. We then compared the surface chemistry of differently challenged individuals, finding increased amounts of long-chained methyl-branched alkanes with similar branching patterns in individuals injected with both dead and viable fungal blastospores, with the latter showing the largest increase. This coincided with the highest amounts of observed cannibalism as well as signs of severe moribundity. Our study provides new mechanistic insight into the emergent collective behaviors involved in the disease defense of a termite society.
Algal biofilm façades are an alternative to traditional green façades which can help to improve biodiversity and air quality within cities. They present a low maintenance approach in which subaerial algae are grown directly on concrete substrates. The intrinsic bioreceptivity of the substrate is a critical factor in successful facade colonisation. Existing research has identified several environmental and material properties which influence concrete bioreceptivity, however a consensus has yet to be made on which properties are most influential and how the interaction between properties may promote algal biofilm growth under specific conditions.
In recent years the BAM has been focusing on the characterization of the writing materials of the medieval Torah scrolls. The challenge imposed by the study of this specific type of manuscript led to designing and building dedicated stages to ensure the safety of the scrolls during the analysis. Furthermore, the identification of multiple corrections executed in apparently identical inks required broadening the standard two-step protocol of near infrared reflectography and X-ray fluorescence to include multispectral imaging. This work has prepared the division to participate in the large collaborative project “To roll: Materialisierte Heiligkeit (Materialised Holiness)” based at the Free University, Berlin.
The presentation will demonstrate the aims of the studies, preliminary results and the strategies adopted by the division 4.5 of the BAM.
The ink analysis protocol developed through cooperation between the Bundesanstalt für Materialforschung und -prüfung in Berlin and the Centre for the Study of Manuscript Cultures at the University of Hamburg involves the use of imaging techniques for ink screening, followed by spectroscopic analysis. In our presentation, we will begin by briefly reviewing the history of writing inks and discussing the three main categories: carbon-based inks, plant, and iron-gall inks. We will address their chronology, precursors, and mixed forms, as well as the features that allow for their identification. Then, we will present the techniques we use in ink analysis, whereby we would like to highlight the limitations, advantages, and disadvantages of each approach. Finally, we will discuss the new mass-spectrometric method based on micro-sampling and using atmospheric solid analysis probe (ASAP).
The current state of preservation of the DSS results from the synergetic effect of various factors such as great age, post-discovery treatments, poor storage conditions, environmental influences and exhibitions. With rare exceptions, neither the initial state nor a list of the treatments performed on each DSS fragment is known. Reconstruction of the individual fragment history will have to rely upon advanced analytical techniques to identify the treatments and their effects.
Management of the scrolls may be divided roughly into three periods: a) the scholarly archiving period, from 1948 to the mid-1960s; b) first attempts at conservation, from the mid-1960s to late-1980s; c) Israel Antiquities Authority Scrolls Lab, from 1991 onwards.
Physico-chemical analyses of writing materials offer insight into various questions associated with historical, cultural, and conservational aspects of manuscript studies. The catalogue of questions that can be addressed with these methods includes authenticity, dating, the attribution of various parts of the text to different scribes and the relation between the primary and secondary texts. Similarly, preservation of the manuscripts requires knowledge of the composition of the original materials versus old repairs, identification of damage, as well as recognition of natural aging and degradation processes. The material sciences can contribute data about the chemical compositions of the writing materials, elucidation of the techniques of their production and the absolute age of organic components, as well as characterization of corrosion effects, evaluation of conservation treatment, and monitoring of the preservation state.
Ancient Inks
(2023)
In the last decade scientists and scholars have accumulated more knowledge on black ink used for writing in Antiquity and the early Middle Ages.
Ready availability of non-destructive testing instruments employed in interdisciplinary projects on historic manuscripts have made it possible to determine the composition of ink and to compare it with the extant records.
Interest in the type of skin used in scriptural materials and preparation methods increased from the nineteenth into the twentieth century. This was due partly to the number of newly discovered fragments and to the invention of new instruments and scientific procedures to identify animal skins and produce qualitative means to demonstrate specific preparation reagents and techniques. The invention of various means of analyzing the DNA of organic materials brought about a revolution in archaeology and in conservation. Difficulties in overcoming contamination of archaeological samples resulted in a number of controversies but also produced advances and improvement in the techniques of ancient DNA analysis and interpretation of results.
On the use of Carbograph 5TD as an adsorbent for sampling VVOCs: validation of an analytical method
(2023)
A standardised method for the analysis of very volatile organic compounds (VVOCs) in indoor air is still missing. This study evaluates the use of Carbograph 5TD as an adsorbent for 60 compounds (47 VVOCs + 13 VOCs) by comparing their recoveries with different spiking modes. The influence of the spiking of the tubes in dry nitrogen, humidified air or along the whole flushing duration mimicking real sampling was investigated. 49 substances (36 VVOCs from C1 to C6) had recoveries over 70% on the adsorbent in humidified air and were validated. The linearity of the calibration curves was verified for every spiking mode and the limits of detection (LOD) and quantification (LOQ) were determined. The LOQs were lower than the existing indoor air guideline values. The robustness of the method was considered by studying the influence of the sampling volume, the sampling flow rate, the humidity level and the storage of the tubes. In general, the most volatile or polar substances were the less robust ones. The combined measurement uncertainty was calculated and lies below 35% for a vast majority of the substances. An example of an emission chamber test using polyurethane foam is shown: Carbograph 5TD performs much better than Tenax® TA for VVOCs and emissions from n-butane were quantified with combined measurement uncertainty.
Fused filament fabrication (FFF) on desktop 3D printers is a material extrusion-based technique often used by educational institutions, small enterprises and private households. Polymeric filaments are melted and extruded through a heated nozzle to form a 3D object in layers. The extrusion temperature is therefore a key parameter for a successful print job, but also one of the main driving factors for the emission of harmful air pollutants, namely ultrafine particles and volatile organic gases, which are formed by thermal stress on the polymeric feedstock. The awareness of potential health risks has increased the number of emission studies in the past years. However, the multiplicity of study designs makes an objective comparison of emission data challenging because printer hardware factors such as the actual extruder temperature (TE) and also feedstockspecific emissions are not considered. We assume that across the market of commercial low- and mid-price FFF printers substantial deviations between actual and set extruder temperatures exist, which have a strong effect on the emissions and hence may bias the findings of exposure studies. In our last publication, we presented a standardized feedstock-specific emission test method and showed that for each investigated feedstock an increase in actual extruder temperature was accompanied by an increase in particle emissions (Tang and Seeger, 2022). Therefore, any systematic discrepancy between set and actual extruder temperature matters. In this study, we used a thermocouple and an infrared camera to measure the actual extruder temperatures at different heights. We found significant under- and overestimation of the actual extruder temperatures by the respective set temperatures in three commercial printers. This caused a broad variation of the measured total numbers of emitted particles (TP), even when the same feedstock was operated. For the determination of TP, we followed the DE-UZ 219 test guideline. In a second round we repeated the tests with all printers adjusted to exactly the same extruder temperatures, i.e., to TE=230°C for ABS and TE=210°C for PLA. All measurements were conducted in a 1 m³ emission test chamber. Particle emissions in the size range between 4 nm and 20 μm were detected. Printing on three different printer models without temperature adjustment resulted for each of the investigated feedstocks in a variation in TP of around two orders of magnitude. After temperature adjustment, this was substantially reduced to approx. one order of magnitude and hence minimizes the bias of printer hardware on the emissions. Our findings suggest that adjustment of the extruder temperature should be mandatory in emission testing standards. It also poses a more accurate benchmark and provides more reliable emission data for evaluation of indoor air quality or for health risk assessments. In addition, a proper temperature setting is in the interest of the user. Some commercial FFF printers may have a higher actual extruder temperature than displayed and unintended overheating may not only impair the print quality but may cause unnecessarily increased exposure to particle emissions.
Since nowadays people spend most of their time indoors, a healthy environment is essential. Volatile organic compounds (VOCs) emitted from furniture and building materials are reported to cause health complaints. Therefore, the usage of low emitting materials will improve the indoor air quality. Quantitative VOC emission testing is usually conducted in emission test chambers under specified controlled conditions as described in DIN 16000-9 and DIN EN 16516.
For reasons of quality control/quality assurance (QC/QA) and for a better comparability of test results from different laboratories, suitable emission reference materials (ERM) are needed. Here, it is important to have a homogenous material with known emission rates over a specific time. Different approaches can be found in literature, inter alia polymer films loaded with the target compound to be released again, or a lacquer material to which a VOC mixture is added. After curing of the lacquer, the material can be loaded into a test chamber. Drawback of those approaches are their relatively fast decreasing emission profiles. For QC/QA purposes according to the test standards, VOC sources with constant emission profiles are desirable.
The EU-funded research project MetrIAQ “Metrology for the determination of emissions of dangerous substances from building materials into indoor air” is working on a multi-component ERM with an envisaged instability of ≤ 10 % in the emission rate over at least 14 days.
Within a doctoral thesis porous materials are impregnated with VOCs. Supercritical CO2 is used as solvent. Thus, the impregnated material does not contain any solvent that may show a measurable amount of emission in the emission test chamber. Furthermore, CO2 has the benefits to have a good availability and low costs. For the selection of porous materials several properties like the pore size, the surface, and the interaction with the components in the atmosphere need to be considered. The impregnation method is optimised while the different porous materials are tested. For the selection of porous materials the pores need to be large enough for the VOC molecules, further influence of the pore size is tested.
Emission testing of volatile organic compounds (VOC) from materials and products is commonly based on emission test chamber measurements. To ensure the comparability of results from different testing laboratories their measurement performance must be verified. For this purpose, Bundesanstalt für Materialforschung und -prüfung (BAM) organizes an international proficiency test every two years using well-characterised test materials (one sealant, one furniture board and four times a lacquer) with defined VOC emissions. The materials fulfilled the requirements of homogeneity, reproducibility, and stability. Altogether, 41 VOCs were included of which 37 gave test chamber air concentrations between 10 and 98 µg/m³. This is the typical concentration range to be expected and to be quantified when performing chamber tests. Four compounds had higher concentrations between 250 and 1105 µg/m³. The relative standard deviations (RSD) of BAM proficiency tests since 2008 are compared and the improvement of the comparability of the emission chamber testing is shown by the decrease of the mean RSD down to 23% in 2021. In contrast, the first large European interlaboratory comparison in 1999 showed a mean RSD of 51%.
Our earlier study based on historical and scientific analysis showed that Iranians used a considerable range of materials in the sizing process. Unlike many nations who used limited sizing materials to improve the mechanical strength and to smoothen the paper surface, Iranians have used various materials for sizing process from Taimurid (15th century) to Safawid (16th century) and Qajar (19th century) periods. Further to our earlier study on the Sizing Materials used in Persian manuscripts and miniature paintings, scientific analysis was carried out to investigate their behaviour against the mould fungus Aspergillus flavus. In the first stage fourteen different sizing materials that was identified from Persian historical recipes were reconstructed. In the second stage fungicidal property of each sizing samples against Aspergillus flavus fungus were identified that will be presented in this paper.
Solid wastewater-based fertilizers were screened for per- and polyfluoroalkyl substances (PFAS) by the extractable organic fluorine (EOF) sum parameter method. The EOF values for ten sewage sludges from Germany and Switzerland range from 154 to 7209 mg kg−1. For thermal treated sewage sludge and struvite the EOF were lower with values up to 121 mg kg−1. Moreover, the application of PFAS targeted
and suspect screening analysis of selected sewage sludge samples showed that only a small part of the EOF sum parameter values can be explained by the usually screened legacy PFAS. The hitherto unknown part of EOF sum parameter contains also fluorinated pesticides, pharmaceutical and aromatic compounds. Because these partly fluorinated compounds can degrade to (ultra-)short PFAS in wastewater treatment plants they should be considered as significant sources of organic fluorine in the environment. The combined results of sum parameter analysis and suspect screening reveal the need to update current regulations, such as the German fertilizer ordinance, to focus not solely on a few selected PFAS such as perfluorooctane sulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) but
consider an additional sum parameter approach as a more holistic alternative. Moreover, diffusion gradient in thin-films (DGT) passive samplers were utilized as an alternative simplified extraction method for PFAS in solid wastewater-based fertilizers and subsequently quantified via combustion ion chromatography. However, the DGT method was less sensitive and only comparable to the EOF values
of the fertilizers in samples with >150 mg kg−1, because of different diffusion properties for various PFAS, but also kinetic exchange limitations.
This study details a thorough analysis of leaky and waveguide modes in biperiodic diffractive nanostructures. By tuning diffraction orders and subsequently confining local density of optical states at two distinct resonance wavelengths, we present a highly sensitive refractive index biosensing platform that can resolve 35.5 to 41.3 nm/RIU of spectral shift for two separate biological analytes.
AbstractThis work addresses the critical need for multifunctional materials and substrate‐independent high‐precision surface modification techniques that are essential for advancing microdevices and sensing elements. To overcome existing limitations, the versatility of mussel‐inspired materials (MIMs) is combined with state‐of‐the‐art multiphoton direct laser writing (DLW) microfabrication. In this way, 2D and 3D MIM microstructures of complex designs are demonstrated with sub‐micron to micron resolution and extensive post‐functionalization capabilities. This study includes polydopamine (PDA), mussel‐inspired linear, and dendritic polyglycerols (MI‐lPG and MI‐dPG), allowing their direct microstructure on the substrate of choice with the option to tailor the patterned topography and morphology in a controllable manner. The functionality potential of MIMs is demonstrated by successfully immobilizing and detecting single‐stranded DNA on MIM micropattern and nanoarray surfaces. In addition, easy modification of MIM microstructure with silver nanoparticles without the need of any reducing agent is shown. The methodology developed here enables the integration of MIMs in advanced applications where precise surface functionalization is essential.
Over the past century, a range of synthetic compounds have been produced to improve humanity’s quality of life. These include pharmaceuticals, plastics, and other chemical compounds that possess properties making them potentially harmful when released to the environment (e.g., ecological and health impacts to humans and animals). Per- and polyfluoroalkyl substances (PFAS) are a large group of chemicals used in the formulations of thousands of consumer goods, including aqueous film-forming foams used to suppress aviation fires in training scenarios, non-stick cookware, fast-food wrappers, water-repellent fabrics, medical equipment, and plastic and leather products. Because of the recent regulations and restrictions on the use of long chain (≥C8) PFAS a significant shift in the industry towards short (C4-C7) and ultrashort (C1-C3) chain alternatives has been recognized the last years. Due to the high polarity and water solubility of ultrashort PFAS, the potential for bioaccumulation is low. However, the high persistence of ultrashort-chain PFAS will result in environmental accumulation, especially in aquatic environments, leading to potential risks for aquatic organisms and increased human external exposure through drinking water. Ultrashort PFAS like trifluoroacetic acid (TFA) are low to moderately toxic to a range of organisms. In addition, ultrashort PFAS can penetrate natural and anthropogenic barriers and eventually reach drinking water sources. Because common drinking water treatment techniques do not sufficiently remove them, they may reach human consumption. In the project we are focusing on detecting and removing PFAS, especially ultrashort-chain PFAS from contaminated groundwater. We are designing passive sampling devices, which can collect and monitor the temporal profile of PFAS species in groundwater. This will allow us to analyze PFAS contaminations in German and Israeli groundwater using state-of-the-art and novel analytical techniques and understand the extent of contamination. In addition to quantification, PFAS contaminated groundwater will be treated via a two-stage process to produce PFAS-free drinking water. As ultrashort-chain PFAS are difficult to analyze with the current target (LC-MS/MS) and sum parameter (AOF, EOF) analysis methods, we additionally using gas chromatography – mass spectrometry (GC-MS). Therefore, an analytical method based on GC-MS is in development to analyze the volatile ultrashort-chain PFAS (TFA, PFPrA, TFMS, PFEtS, PFPrS, trifluoroethanol, pentafluoropropanol and hexafluoro isopropanol) directly in contaminated groundwater samples with the headspace technique and in eluates of organic solvents from the developed passive sampler after direct injection. Moreover, a two-stages process is designed to increase the low concentrations found in groundwater using novel membranes processes such as closed-circuit reverse osmosis (CCRO) and mixed matrix composite nanofiltration membranes (MMCM). Next, the rejected streams containing higher concentrations of PFAS will be treated by coagulation, and the remaining PFAS adsorbed onto carbonaceous nanomaterials (CNMs). The DEFEAT-PFAS project will result in the development of novel tools to detect, quantify, and remove PFAS, especially ultrashort-chain PFAS from contaminated groundwater, and will acquire a new understanding of the extent of these contaminations.
Current decontamination strategies of PFAS-burdened soils mainly consist of adsorption methods using adsorbents for fixation of PFAS in the ground. A second option is the utilization of a “pump and treat” process, cycling polluted soils through a washing plant leading to the concentration of the pollutants in the fine fraction. Only a subsequent, high-energy consuming pyrolysis process guarantees the total destruction of all fluorinated organic contaminants. These approaches are cost-intensive and not intended for the direct decomposition of all PFAS contaminants. Hence, there is a great demand for innovative developments and chemical treatment technologies, dealing with new strategies of tackling the PFAS problem. Thus, we investigated mechanochemical treatment of PFAS contaminated soils with various additives in a ball mill and analyzed the PFAS defluorination with gas chromatography mass spectrometry (GC-MS) and liquid chromatography tandem mass spectrometry (LC-MS/MS), respectively, as well as the fluoride mineralization by ion chromatography (IC) and fluorine K-edge X-ray absorption near-edge structure (XANES) spectroscopy.
Thermal Destruction of PFAS
(2023)
Thermal treatment processes are currently the only full-scale option for thedestruction of per- and polyfluoroalkyl substances (PFAS) in large waste streams. While all organic molecules including PFAS are susceptible to thermal destruction, their decomposition rates are controlled by process variables such as temperature, reaction atmosphere, and residence time. Concerns exist about the formation of products of incomplete destruction and their emission from hazardous waste incinerators. This talk will summarize the current stateof-the-art of thermal PFAS destruction, identify research needs, and showcase future research designed to address critical knowledge gaps.
Per- and polyfluoroalkyl substances (PFAS) are chemicals which were developed to improve humanity’s quality of life. Due to their high chemical stability and resistance to degradation by heat or acids, PFAS were used in a variety of consumer products. The continuous use of PFAS in household products and the discharge of PFAS from industrial plants into the sewer system resulted in the contamination of effluents and sewage sludge from wastewater treatment plants (WWTPs) (Roesch et al. 2022). Since sewage sludge is often used as fertilizer, its application on agricultural soils has been observed as a significant entry path for PFAS into the environment, specifically in our food chain. In Germany the sewage sludge/biosolid application on agricultural land was banned with the amendment of the German Sewage Sludge Ordinance and by 2029 sewage sludge application will be totally prohibited. However, phosphorus (P) from sewage sludge should still be recycled in WWTPs of cities with a population larger than 50,000 residents. To produce high-quality P-fertilizers for a circular economy, PFAS and other pollutants (e.g. pesticides and pharmaceuticals) must be separated from sewage sludge. Due to the strong diversity of industrial PFAS usage it is not clear if a safe application of novel recycled P-fertilizers from WWTPs can be guaranteed. Therefore, we analyzed various sewage sludges and wastewater-based fertilizers. Sewage sludge (SL) samples from various WWTPs in Germany and Switzerland, six sewage sludge ashes (SSA) from Germany, six thermally treated SL and SSA samples with different additives (temperatures: 700-1050 °C), two pyrolyzed SL samples (temperature: 400 °C) and two struvite samples from Germany and Canada were analyzed. The goal was to quantify PFAS in sewage sludges and wastewater-based P-fertilizers with the sum parameter extractable organic fluorine (EOF) by combustion ion chromatography (CIC). The results were compared with data from classical LC-MS/MS target analysis as well as selected samples by HR-MS suspect screening. The EOF values of the SLs mainly range between 154 and 538 µg/kg except for one SL which showed an elevated EOF value of 7209 µg/kg due to high organofluorine contamination. For the SSA samples the EOF values were lower and values between LOQ (approx. 60 µg/kg) and 121 µg/kg could be detected. For the pyrolyzed SLs no EOF values above the LOQ were detected. Moreover, the two wastewater-based struvite fertilizers contain 96 and 112 µg/kg EOF, respectively. In contrast to the EOF values, the sum of PFAS target values were relatively low for all SLs. Additional applied PFAS HR-MS suspect screening aimed to tentatively identify PFAS that could contribute to the hitherto unknown part of the EOF value. The majority of the detected fluorinated compounds are legacy PFAS such as short- and long-chain perfluorocarboxylic acids (PFCA), perfluorosulfonic acids (PFSA), polyfluoroalkyl phosphate esters (PAPs) and perfluorophosphonic acids (PFPA). Moreover, fluorinated pesticides, pharmaceutical as well as aromatic compounds were also identified, which are all included in the EOF parameter. Our research revealed that the current PFAS limit of 100 µg/kg for the sum of PFOS + PFOA in the German Fertilizer Ordinance is no longer up to date. Since the number of known PFAS already exceeds 10,000, the ordinance limit should be updated accordingly. Recent regulations and restrictions on using long-chain PFAS (≥C8) have resulted in a significant shift in the industry towards (ultra-)short-chain alternatives, and other, partly unknown, emerging PFAS. Ultimately, also fluorinated pesticides and pharmaceuticals, which end up as ultrashort PFAS in the WWTPs, have to be considered as possible pollutants in fertilizers from wastewater, too.
Pseudomonas aeruginosa is an opportunistic pathogen of considerable medical importance, owing to its pronounced antibiotic tolerance and association with cystic fibrosis and other life-threatening diseases. The aim of this study was to highlight the genes responsible for P. aeruginosa biofilm tolerance to antibiotics and thereby identify potential new targets for the development of drugs against biofilm-related infections. By developing a novel screening approach and utilizing a public P. aeruginosa transposon insertion library, several biofilm-relevant genes were identified. The Pf phage gene (PA0720) and flagellin gene (fliC) conferred biofilm-specific tolerance to gentamicin. Compared with the reference biofilms, the biofilms formed by PA0720 and fliC mutants were completely eliminated with a 4-fold-lower gentamicin concentration. Furthermore, the mreC, pprB, coxC, and PA3785 genes were demonstrated to play major roles in enhancing biofilm tolerance to gentamicin. The analysis of biofilm-relevant genes performed in this study provides important novel insights into the understanding of P. aeruginosa antibiotic tolerance, which will facilitate the detection of antibiotic resistance and the development of antibiofilm strategies against P. aeruginosa.
Consequences of tolerance to disinfectants on the evolution of antibiotic resistance in E. coli
(2023)
Biocides are used as disinfectants and preservatives; one important active substance in biocides is benzalkonium chloride (BAC). BAC-tolerant bacterial strains can survive short treatments with high concentrations of BAC. BAC tolerance and resistance have been linked to antibiotic resistance. Here, the selection dynamics between a BAC-tolerant Escherichia coli strain and a sensitive wild type were investigated under four conditions: in the absence of antibiotics and in the presence of three different sub-inhibitory concentrations of the antibiotic ciprofloxacin in liquid cultures. The wild type was selected over the BAC-tolerant strain in the absence of antibiotics, while the BAC-tolerant strain was selected over the wild type at all ciprofloxacin concentrations investigated, with a minimum selection concentration (MSC) of 1/10th of the minimum inhibitory concentration (MIC) of the wild type. Furthermore, the evolvability of resistance of the two strains to inhibitory concentrations of ciprofloxacin was assessed by performing a serial dilution evolution experiment with gradually increasing ciprofloxacin concentrations. The wild type had a higher probability to develop resistance
to ciprofloxacin than the tolerant strain. By the end of the evolution experiment both strains evolved to grow at the highest ciprofloxacin concentration investigated, which was 2048 ×MIC of the wild type. The importance of these results is highlighted by the fact that concentrations of ciprofloxacin well above the calculated MSC can be found in environmental samples such as hospital wastewaters and livestock slurry. In turn, BAC is used as a disinfectant in the same settings. Thus, the selection of BAC-tolerant strains at sub-inhibitory concentrations of ciprofloxacin can contribute to the stabilization and spread of BAC-tolerance in natural populations. The prevalence of such strains can impair the effects of BAC disinfections.
Glutaraldehyde is widely used as a disinfectant and preservative, but little is known about its effects on bacterial susceptibility to antibiotics and the selection of tolerant phenotypes. We found that short-term exposure to sub-inhibitory levels of glutaraldehyde makes E. coli resistant to high doses of bactericidal antibiotics from different classes. This tolerance is associated with delayed, heterogeneous regrowth dynamics and global transcriptome remodeling. We identified over 1200 differentially expressed genes, including those related to antibiotic efflux, metabolic processes, and the cell envelope. The cells entered a disrupted state likely due to the unspecific mode-of-action of glutaraldehyde. Despite this unregulated response, we identified several differentially expressed genes not previously associated with antibiotic tolerance or persistence that induce antibiotic tolerance when overexpressed alone. These findings highlight how the unspecific mode-of-action of disinfectants can make bacteria temporarily resistant to antibiotics. They have implications for settings where disinfectants and antibiotics are used in close proximity, such as hospitals and animal husbandry, and for the selection dynamics of tolerant pheno- and genotypes in fluctuating environments where microorganisms are exposed to these substances, such as sewage systems. A trade-off arises from overcoming the disrupted state as quickly as possible and maintaining antibiotic tolerance.
The overarching goal of this project is to develop a predictive model for efflux-mediated antimicrobial tolerance in bacterial multicellular assemblies. Our central hypostasis is that efflux pump activity causes emergent antibiotic tolerance of multicellular bacterial populations, through the interplay of efflux mediated spatial interactions and efflux-linked persistence. To test this hypothesis, we will use a combination of microscopy, microbial killing assays, computational modelling, and data analysis, integrating information from 3 types of multicellular assembly: colonies, cell-to-cell interactions in a monolayer microfluidic device, and 3D flow chamber biofilms. Building on our preliminary observations, we will experimentally characterize the link between colony structure and spatial patterns of efflux gene expression in strains that differ in their levels of efflux. We will develop a mathematical model to test whether local growth inhibition of neighbors due to effluxing cells, coupled with local environment-dependent regulation of efflux, can account qualitatively for these results. By including persister cell formation in our model we will predict, and measure, the emergent function of antimicrobial tolerance in our colonies. To fully understand how tolerance emerges from the interplay between efflux-mediated spatial interactions and efflux-linked persister cell formation, we need quantitative measurements at the single cell level. To this end, we will use a microfluidic setup with cells growing in a monolayer to qualify in detail the dependence of efflux expression and persister cell formation on nutrient conditions, the correlation between efflux and persister formation, and the spatial range of efflux-mediated neighbour growth inhibition. To predict and quantitatively understand the emergent multicellular function of tolerance, we will perform individual-based modelling of biofilm growth, using as input the parameters measured on the single-cell level with our microfluidics experiments. Our simulations will predict biofilm spatial structure development, patterns of efflux and persister formation and, ultimately, tolerance to antimicrobial challenge. These predictions will be directly tested in flow-cell biofilm experiments. We are currently generating acrAB-tolC knockout-strain, without efflux activity, and a strain with an inducible acrAB-tolC efflux pump. To distinguish the different strains under the microscope, they were labeled with genes encoding for different fluorescent proteins. All strains are currently characterized in terms of growth, minimum inhibitory concentration of different antimicrobial substances, colony morphology, and biofilm formation ability. On the theoretical side, we are currently working on modeling the system at various scales and degree of detail, ranging from coarse-grained continuum models to stochastic, individual-based models. Some exploratory work was doe to test existing software for individual-based modelling that may be adapted for our purpose. Furthermore, we are in the process of developing more coarse-grained models. This work involves some physiological modelling and literature search, focusing on working mechanisms of efflux pumps and kinetic models for import and export of antibiotics.
Half of the global material consumption is mineral material. The circularity is still low so that enhanced use of secondary building material is required to close loops. Three different secondary building materials are discussed based on exemplary research results: construction and demolition waste (C&D waste), soil-like material and incineration bottom ash (IBA). Focus was laid on the environmental compatibility of the materials examined mainly by standardized leaching tests. C&D waste was investigated after a wet treatment using a jigging machine, soil-like material and IBA were characterized with respect to their material composition. The environmental compatibility in particular was studied using standard leaching tests (batch tests and column tests). It was concluded that soil-like material can mostly be utilized even when the precautionary limit values set are exceeded by a factor of less than 2. For C&D waste the fine fraction below 2 mm and the content of brick material is problematic. IBA fulfills quality level HMVA-2 following German regulation. Higher quality levels of utilization might be achievable with better treatment technologies.
Wet-mechanical treatment: Processing of bituminous road construction waste in a jigging machine
(2023)
Jigging machines are used in processing technology in many areas. Examples are the processing of coal, ores, and primary and secondary raw and waste materials. Even small differences in density are offen sufficient for successful sorting. In the work presented here, milled material from road construction waste contaminated with bitumen is to be separated from uncontaminated material. In this way, scarce landfill space could be saved and mineral material be returned to the material cycle.
The long-term leaching behavior of incineration bottom ash (IBA) was studied with large-scale samples from two German waste incinerators with grate technology. The observation period was up to 281 days. The aging processes proceeded faster in the outdoor storage of the samples. The dominant factor in the leaching behavior is the pH, which starts at values above 12 and decreases to values below 10 (outdoors, <11 indoors). Most heavy metals exhibit minimum solubility in this pH range. The solubility of Sb depends on the prevailing Ca concentration, due to the formation of low-soluble Ca antimonate. The very low sulfate concentrations observed in the leaching tests with fresh IBA could be explained by the presence of ettringite. In the course of the aging reaction, ettringite is transformed into gypsum. The results from batch tests were compared with those from column tests, showing reasonable agreement. Leaching dynamics can be better followed with column tests. All results confirm that the use of IBA is possible under German law.
Glutaraldehyde is widely used as a disinfectant and preservative, but little is known about its effects on bacterial susceptibility to antibiotics and the selection of tolerant phenotypes. We found that short-term exposure to sub-inhibitory levels of glutaraldehyde makes E. coli resistant to high doses of bactericidal antibiotics from different classes. This tolerance is associated with delayed, heterogeneous regrowth dynamics and global transcriptome remodeling. We identified over 1200 differentially expressed genes, including those related to antibiotic efflux, metabolic processes, and the cell envelope. The cells entered a disrupted state likely due to the unspecific mode-of-action of glutaraldehyde. Despite this unregulated response, we identified several differentially expressed genes not previously associated with antibiotic tolerance or persistence that induce antibiotic tolerance when overexpressed alone. These findings highlight how the unspecific mode-of-action of disinfectants can make bacteria temporarily resistant to antibiotics. They have implications for settings where disinfectants and antibiotics are used in close proximity, such as hospitals and animal husbandry, and for the selection dynamics of tolerant pheno- and genotypes in fluctuating environments where microorganisms are exposed to these substances, such as sewage systems. A trade-off arises from overcoming the disrupted state as quickly as possible and maintaining antibiotic tolerance.
Glutaraldehyde is widely used as a disinfectant and preservative, but little is known about its effects on bacterial susceptibility to antibiotics and the selection of tolerant phenotypes. We found that short-term exposure to sub-inhibitory levels of glutaraldehyde makes E. coli resistant to high doses of bactericidal antibiotics from different classes. This tolerance is associated with delayed, heterogeneous regrowth dynamics and global transcriptome remodeling. We identified over 1200 differentially expressed genes, including those related to antibiotic efflux, metabolic processes, and the cell envelope. The cells entered a disrupted state likely due to the unspecific mode-of-action of glutaraldehyde. Despite this unregulated response, we identified several differentially expressed genes not previously associated with antibiotic tolerance or persistence that induce antibiotic tolerance when overexpressed alone. These findings highlight how the unspecific mode-of-action of disinfectants can make bacteria temporarily resistant to antibiotics. They have implications for settings where disinfectants and antibiotics are used in close proximity, such as hospitals and animal husbandry, and for the selection dynamics of tolerant pheno- and genotypes in fluctuating environments where microorganisms are exposed to these substances, such as sewage systems. A trade-off arises from overcoming the disrupted state as quickly as possible and maintaining antibiotic tolerance.
In order to protect natural gypsum deposits and to compensate for the decreasing amount of Flue Gas Desulfurization (FGD) gypsum it is necessary to develop and explore new sources of gypsum. For this purpose, the potentials of different gypsum wastes are investigated in the study “GipsRec 2.0”, funded by the Federal Ministry of Education and Research (Germany).
On the one hand, the project worked on a new processing technology for gypsum fiberboards (GFB). While the recycling of gypsum plasterboards has already been carried out on an industrial scale for several years, the recycling of gypsum fiberboards (GFB) has proven to be challenging. Gypsum fiberboards from demolition sites and offcuts from GFB production were used for these investigations. The tests were conducted on a technical scale. Furthermore, various synthetic gypsums are being investigated with regard to their suitability for gypsum production. The analyses are carried out on production residues.
In this project, a promising process for gypsum fiberboard recycling could be developed, as well as other waste gypsums are investigated and evaluated with regard to their potential as secondary raw material. In addition, selected process routes are assessed for their environmental impact using a life cycle assessment (LCA) approach.
The exponential rise in the number of fungal genomes sequenced by next-generation sequencing techniques makes it necessary to increase efforts to correctly annotate and assign gene functions. There are two possibilities to explore a genome and its gene functions. The hypothesis-based method proves the function of already existing gene/allele candidates by targeted mutagenesis - so called reverse genetics. The basis of forward genetics approaches is the random mutagenesis of the genome, followed by screening of obtained mutants for the phenotype of interest, and identification of the mutated genes in the respective mutants. This strategy is hypothesis-generating, means it is necessary to verify the relationship between the detected mutations and the observed phenotype by targeted mutagenesis of the identified gene. We developed a toolbox for editing the genome of the rock inhabitant Knufia petricola [Eurotiomycetes, Chaetothyriales] that allows the study of the phenotypic characteristics of black fungi such as the regulation of pigment synthesis, general stress responses, oligotrophy, and the unusual modes of cell division by advanced reverse and forward genetics approaches. The toolbox includes the annotated genome sequence of strain A95, efficient strategies for CRISPR/Cas9-based genome editing and live-cell imaging using genetically encoded fluorescent proteins, as well as protocols for -omics approaches and for simulation of mineral weathering. A forward genetics approach using transposon mutagenesis is currently developed for identifying essential genes. The established protocols and knowledge gained from K. petricola form a starting point for making other fungi from extreme environments accessible to genetic manipulation.
Dihydroxynaphthalene (DHN) melanin is produced by diverse Ascomycetes via slightly differing biosynthetic routes. The polyketide synthases (PKS) release the heptaketide YWA1, the hexaketide AT4HN or the pentaketide T4HN. The first two products are deacetylated by ‘yellowish-green’ hydrolases to T4HN, and T4HN is further converted by a core set of enzymes to DHN. Final polymerization steps are accomplished by multicopper oxidases. DHN melanogenesis is often regulated in a spatial and temporal fashion resulting e.g., in melanized reproduction and survival structures of the foliar plant pathogen Botrytis cinerea (Schumacher 2016, Mol Microbiol). In contrast, a polyphyletic group of Ascomycetes (microcolonial fungi/ black yeasts) dwelling in hostile habitats such as bare rock surfaces in hot and cold deserts, exhibits constitutive melanogenesis. Here, DHN melanin builds a protective layer around all vegetative cells thus contributing to the survival of diverse environmental stresses even without specialized reproduction structures. For studying the relevance of constitutive DHN melanogenesis for tolerance of abiotic and biotic stresses, adhesion to substrates and subsequent damage of colonized surfaces, the rock-inhabiting fungus Knufia petricola was chosen as gene functions in this fungus can be studied by CRISPR/Cas9-based genome editing. The putative melanogenic genes were identified in the genome of K. petricola, deleted to confirm their involvement in DHN melanogenesis and co-expressed in Saccharomyces cerevisiae for reconstruction of the synthesis pathway. Phenotypes of DHN-deficient mutants are studied. Here, we will discuss the role of the DHN melanin layer on the outer cell wall in tolerating UV irradiation.
In-vivo mutagenesis of the rock inhabitant Knufia petricola by a customized Ac/Ds transposon system
(2023)
Microcolonial black fungi ubiquitously inhabit sun-exposed natural and man-made surfaces of our planet. To promote genetic studies, CRISPR/Cas9-based genome editing was implemented in the rock-inhabiting fungus Knufia petricola (Eurotiomycetes/ Chaetothyriales). Now efficient targeted mutagenesis of K. petricola - as a representative of the polyphyletic group of black fungi - enables the elucidation of extremotolerance, oligotrophism, unusual types of cell division, mineral weathering and symbiotic interactions. Even more progress on assigning functions to yet unknown genes can be achieved by a forward genetics approach. We chose the two-component Activator/Dissociation (Ac/Ds) transposon system from maize for generating K. petricola insertional mutants by in-vivo mutagenesis. For the optimal use of this genetic tool, an inducible promoter i.e, from the metabolism-independent Tet-on system, was combined with the AcTPase-coding sequence enabling the regulatable transposition of the resistance cassette-containing Ds transposon. In total, six auxotrophic Ac/Ds starter strains containing the Ds transposon at different position of ade2, ura3 or ppt1 were generated. The cultivation of these strains with doxycycline for induction of TET::Ac and subsequent selection of cells on ADE/URA/LYS-lacking media resulted in prototrophic colonies (revertants) for most Ac/Ds strains. Amplicon sequencing of excision sites revealed characteristic footprint patterns, proving that the transposon jumped. For identifying unknown Ds re-insertions sites, the thermal asymmetric interlaced (TAIL)-PCR was successfully implemented. First identified Ds re-insertion sites suggest that the distribution pattern may depend on the excision site. Currently, transposition frequencies and genome-wide distribution of re-insertion sites are studied in different Ac/Ds starter strains to identify the best candidate for generating saturated mutant libraries. This transposon mutagenesis strategy is also interesting for studying other black fungi, because once the Ac and Ds components are integrated in the genome, the fungus ‘only’ needs to be cultivated for generating insertional mutants.
Dihydroxynaphthalene (DHN) melanin is produced by diverse Ascomycetes via slightly differing biosynthetic routes. The polyketide synthases (PKS) release the heptaketide YWA1, the hexaketide AT4HN or the pentaketide T4HN. The first two products are deacetylated by ‘yellowish-green’ hydrolases to T4HN, and T4HN is further converted by a core set of enzymes to DHN. Final polymerization steps are accomplished by multicopper oxidases. DHN melanogenesis is often regulated in a spatial and temporal fashion resulting e.g., in melanized reproduction and survival structures of the foliar plant pathogen Botrytis cinerea (Schumacher 2016, Mol Microbiol). In contrast, microcolonial black fungi exhibit constitutive melanogenesis. Here, DHN melanin builds a protective layer around all vegetative cells thus contributing to the survival of diverse environmental stresses even without specialized reproduction structures. For studying the regulation and relevance of DHN melanogenesis for tolerance of abiotic and biotic stresses, adhesion to substrates and subsequent damage of colonized surfaces, the rock-inhabiting fungus Knufia petricola was chosen as gene functions in this fungus can be studied by CRISPR/Cas9-based genome editing. The putative melanogenic genes were identified in the genome of K. petricola, deleted to confirm their involvement in DHN melanogenesis and co-expressed in Saccharomyces cerevisiae for reconstruction of the synthesis pathway. Phenotypes of deletion mutants are studied for specifying the functions of DHN melanin in K. petricola.
Surfaces of metallic copper and copper alloys effectively inactivate microorganisms and viruses. However, the exact inactivation mode is still under debate. Main factors are assumed to include direct contact with the metallic surface, influx of Cu(I)/Cu(II) ions and the generation of reactive oxygen species (ROS). Laser-induced periodic surface structures (LIPSS) are frequently reported to act antibacterial, mainly by prevention of bacterial adhesion due to a limited number of possible adhesion points or by increasing the overall surface of intrinsically antibacterial materials. In time-kill experiments with E. coli and S. aureus we analyzed the impact of LIPSS on the toxicity of metallic copper and brass. We also conducted ROS accumulation assays and conclude that the application of LIPSS is not generally straight forward to obtain or improve antibacterial surfaces. Thus, the antibacterial effects of LIPPS.