Anmelden

Open Access

  • Startseite
  • Suchen
  • Browsen
  • Veröffentlichen
  • Hilfe
  • Organisationseinheit der BAM

4 Material und Umwelt

  • 4.0 Abteilungsleitung und andere (167) RSS-Feed abonnieren
  • 4.1 Biologische Materialschädigung und Referenzorganismen (331) RSS-Feed abonnieren
  • 4.2 Materialien und Luftschadstoffe (281) RSS-Feed abonnieren
  • 4.3 Schadstofftransfer und Umwelttechnologien (269) RSS-Feed abonnieren
  • 4.4 Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung (271) RSS-Feed abonnieren
  • 4.5 Kunst- und Kulturgutanalyse (212) RSS-Feed abonnieren

Filtern

Autor

  • Kalbe, Ute (11)
  • Simon, Franz-Georg (9)
  • Wöhlecke, Andreas (9)
  • Bandow, Nicole (7)
  • Holm, Olaf (4)
  • Schatten, Rene (3)
  • Müller, Axel (2)
  • Schoknecht, Ute (2)
  • Szuppa, Tony (2)
  • Wachtendorf, Volker (2)
  • Adam, Christian (1)
  • Adamczyk, Burkart (1)
  • Becker, Roland (1)
  • Brauer, F. (1)
  • Braun, Ulrike (1)
  • Brückmann, J. (1)
  • Burkhardt, M. (1)
  • Dabrunz, A. (1)
  • Denz, W. (1)
  • Dorgerloh, Ute (1)
  • Egeler, P. (1)
  • Eisl, A.-M. (1)
  • Feiler, U. (1)
  • Fritz, I. (1)
  • Gartiser, S. (1)
  • Gehrmann, H.-J. (1)
  • Giegrich, J. (1)
  • Heisterkamp, I. (1)
  • Hiebel, M. (1)
  • Higashino, K. (1)
  • Ilvonen, O. (1)
  • Imoto, Y. (1)
  • Krüger, O. (1)
  • Kurosawa, A. (1)
  • König, S. (1)
  • Lebertz, H. (1)
  • Müller, Werner (1)
  • Müller, Werner W. (1)
  • Müller, Werner Wolfgang (1)
  • Niebaum, A. (1)
  • Oberender, C. (1)
  • Pandard, P. (1)
  • Pötschke, G. (1)
  • Ratte, M. (1)
  • Rohn, H. (1)
  • Sakanakura, H. (1)
  • Scheerbaum, D. (1)
  • Schmidt, M. (1)
  • Schreiber, F. (1)
  • Soldán, P. (1)
  • Someya, M. (1)
  • Susset, B. (1)
  • Weimann, Karin (1)
  • Weiß, R. (1)
  • Weltens, R. (1)
  • Will, Verena (1)
  • Yasutaka, T. (1)
- weniger

Erscheinungsjahr

  • 2017 (44) (entfernen)

Dokumenttyp

  • Vortrag (14)
  • Zeitschriftenartikel (10)
  • Beitrag zu einem Tagungsband (6)
  • Posterpräsentation (6)
  • Zeitschriftenheft (Herausgeberschaft für das komplette Heft) (4)
  • Sonstiges (3)
  • Beitrag zu einem Sammelband (1)

Sprache

  • Deutsch (28)
  • Englisch (16)

Referierte Publikation

  • nein (38)
  • ja (6)

Schlagworte

  • Leaching (10)
  • Deponie (5)
  • Kunststoffdichtungsbahnen (4)
  • PAK (4)
  • Verwertung (4)
  • Construction products (3)
  • Elutionsverfahren (3)
  • Fremdprüfung (3)
  • Mantelverordnung (3)
  • Recycling (3)
+ weitere

Organisationseinheit der BAM

  • 4.3 Schadstofftransfer und Umwelttechnologien (44) (entfernen)

44 Treffer

  • 1 bis 10
  • CSV
  • RIS
  • 10
  • 20
  • 50
  • 100

Sortieren nach

  • Jahr
  • Jahr
  • Titel
  • Titel
  • Autor
  • Autor
Results from a round robin test for the ecotoxicological evaluation of construction products using two leaching tests and an aquatic test battery (2017)
Gartiser, S. ; Heisterkamp, I. ; Schoknecht, Ute ; Burkhardt, M. ; Ratte, M. ; Ilvonen, O. ; Brauer, F. ; Brückmann, J. ; Dabrunz, A. ; Egeler, P. ; Eisl, A.-M. ; Feiler, U. ; Fritz, I. ; König, S. ; Lebertz, H. ; Pandard, P. ; Pötschke, G. ; Scheerbaum, D. ; Schreiber, F. ; Soldán, P. ; Weiß, R. ; Weltens, R.
A European round robin test according to ISO 5725-2 was conceptually prepared, realised, and evaluated. The aim was to determine the inter-laboratory variability of the overall process for the ecotoxicological characterization of construction products in eluates and bioassays. To this end, two construction products BAM-G1 (granulate) and HSR-2 (roof sealing sheet), both made of EPDM polymers (rubber), were selected. The granular construction product was eluted in a one stage batch test, the planar product in the Dynamic Surface Leaching test (DSLT). A total of 17 laboratories from 5 countries participated in the round robin test: Germany (12), Austria (2), Belgium (1), Czech Republic (1) and France (1). A test battery of four standardised ecotoxicity tests with algae, daphnia, luminescent bacteria and zebrafish eggs was used. As toxicity measures, EC50 and LID values were calculated. All tests, except the fish egg test, were basically able to demonstrate toxic effects and the level of toxicity. The reproducibility of test results depended on the test specimens and the test organisms. Generally, the variability of the EC50 or LID values increased with the overall level of toxicity. For the very toxic BAM-G1 eluate a relative high variability of CV ¼ 73%e110% was observed for EC50 in all biotests, while for the less toxic HSR-2 eluate the reproducibility of EC50 varied with sensitivity: it was very good (CV ¼ 9.3%) for the daphnia test with the lowest sensitivity, followed by the algae test (CV ¼ 36.4%). The luminescent bacteria test, being the most sensitive bioassay for HSR-2 Eluate, showed the highest variability (CV ¼ 74.8%). When considering the complex overall process the reproducibility of bioassays with eluates from construction products was acceptable.
Amts- und Mitteilungsblatt der BAM, Band 47, Heft 4 (2017)
Amts- und Mitteilungsblatt, Band 47, Heft 2 (2017)
Amts- und Mitteilungsblatt, Band 47, Heft 1 (2017)
RecArc - Verwertung von Rückständen aus der Metallurgie mit der Lichtbogentechnologie (2017)
Adamczyk, Burkart ; Simon, Franz-Georg ; Adam, Christian
In dem Projekt soll die vollständige Wiederverwertbarkeit der Schlacke und ihrer Bestandteile demonstriert werden. Dazu gehören die vollständige Rückgewinnung der metallischen Phase, die in die Edelstahlherstellung zurückgeführt werden kann, sowie die Aufwertung der mineralischen Fraktion, die ihre uneingeschränkte Verwendung als Zementzumahlstoff oder mineralischer Baustoff erlaubt. Bei geeigneter Prozessführung des elektrischen Lichtbogenofens können durch „reduzierendes Schmelzen“ die chromhaltigen Wertstoffe zusammen mit anderen Schwermetallen zu 97% in einer Metalllegierung angereichert und separiert werden. Diese kann als Rohstoff in der Metallurgie eingesetzt werden. Der Chromgehalt der mineralischen Komponte der Schlacke konnte von ca. 3% auf unter 0,1% verringert werden. Die mineralische Fraktion lässt sich durch entsprechende Zuschläge während des Schmelzbetriebes und eine anschließende Granulation der schmelzflüssigen Phase zu einem Material aufwerten, das in seiner Zusammensetzung und seinen Eigenschaften typischen Zementkomponenten entspricht und als Rohstoff in der Zementproduktion eingesetzt werden kann. Dafür müssen allerdings noch die rechtlichen Voraussetzungen geschaffen werden, da der Rohstoffeinsatz gerade im Zement strengen Auflagen unterliegt und die Zemente bestimmte Normen erfüllen müssen. Durch die in RECARC aufgezeigte Möglichkeit der Wiederverwertung können somit Stoffkreisläufe geschlossen werden, die ansonsten zu einem Verlust wertvoller Rohstoffe führen. Vor allem die steigenden Rohstoffkosten, aber auch die immer stärker limitierten CO2-Emissionen zeigen die hohe Relevanz im Umgang mit metallurgischen Reststoffen. Eine Überführung des in RECARC demonstrierten Verfahrens in die Industrie könnte einen wichtigen Beitrag zur nachhaltigen Schonung der natürlichen Ressourcen und der Umwelt leisten.
Amts- und Mitteilungsblatt, Band 47, Heft 3 (2017)
Methods for the Evaluation of Waste Treatment Processes (2017)
Gehrmann, H.-J. ; Hiebel, M. ; Simon, Franz-Georg
Decision makers for waste management are confronted with the problem of selecting the most economic, environmental, and socially acceptable waste treatment process. This paper elucidates evaluation methods for waste treatment processes for the comparison of ecological and economic aspects such as material flow analysis, statistical entropy analysis, energetic and exergetic assessment, cumulative energy demand, and life cycle assessment.The work is based on the VDI guideline 3925. A comparison of two thermal waste treatment plants with different process designs and energy recovery systems was performed with the described evaluation methods. The results are mainly influenced by the type of energy recovery, where the waste-to-energy plant providing district heat and process steam emerged to be beneficial in most aspects. Material recovery options from waste incineration were evaluated according to sustainability targets, such as saving of resources and environmental protection.
Dichtungskontrollsystem (DKS) für Kunststoffdichtungsbahnen (2017)
Wöhlecke, Andreas
Ein neuartiges Dichtungskontrollsystem speziell für Kunststoffdichtungsbahnen wird kurz vorgestellt. Die prinzipielle Funktionsweise von Dichtungskontrollsystemen für Konvektionssperren werden erläutert. Die Anforderungen der Deponieverordnung an die Widerstandsfähigkeit und der Zulassungsrichtlinie an die Leistungsfähigkeit werden beschrieben. Vor diesem Hintergrund werden die besonderen Eigenschaften des neuen Dichtungskontrollsystems kurz aufgezeigt.
Influence of weathering on the leaching behaviour of zinc and PAH from synthetic sports surfaces (2017)
Wachtendorf, Volker ; Kalbe, Ute ; Krüger, O. ; Bandow, Nicole
Synthetic materials used for outdoor sports grounds consist of a mix of inorganic, organic and polymeric compounds that show ageing due to weathering and a complex leaching behaviour by percolation of rainwater, which can limit its lifetime. Additionally, weathering exposure induces degradation processes in the polymers, which leads to the formation of new surfaces allowing water to access additional reservoirs of leachable compounds. A laboratory test comprising artificial weathering, ozonisation and subsequent leaching was developed to investigate this behaviour in a reproducible and controllable way. The experiments showed a general decline of Zn, polycyclic aromatic hydrocarbons (PAH) and total organic carbon (TOC) concentrations after an initial increase. Within this general trend, the course of concentration over exposure duration is very specific for individual sample materials and the analyte under investigation. The results indicate that weathering and degradation behaviour cannot be predicted from initial material conditions. Thus, weathering experiments are recommended to fill this gap of knowledge.
PEREBAR - Long-Term Performance of Permeable Reactive Barriers Used for the Remediation of Contaminated Groundwater (2017)
Simon, Franz-Georg
Contaminated land, landfills and sediments pose a serious environmental threat by polluting groundwater in the surrounding area. In 14 European countries contamination caused by uranium represents a particularly serious danger where drinking water resources might be affected. Other heavy metals and organic pollutants can also have a strongly deleterious effect on groundwater. Available technologies (e.g. pump- and-treat) fall short of solving the problem because their performance is not yet adequate for effective remediation. The aim of the project is to elaborate the scientific basis for laboratory and pilot-scale testing of and the practical application of a considerably more efficient and cost-effective in-situ reactive barrier technology targeting the above contaminants. The primary model test site will be an area in Southern Hungary contaminated by uranium mining- thus including a region which is due to become part of the European Union. The approach taken to meet the project objectives was the characterisation of different reactive materials and relevant attenuation processes in the reactive matrix of the permeable barrier with special respect to their long-term behaviour. The experimental work included laboratory experiments at different scales, going from bench-scale tests up to pilot-scale, and field-scale experiments. Experimental conditions were predetermined by the characteristics of the model site, such as geologic and hydrogeological settings, soil composition, and type, extent and spreading of the contamination. Technological methods to enhance the long-term efficacy and cost-effectiveness of permeable reactive barrier systems were developed and tested under realistic conditions.
  • 1 bis 10

OPUS4 Logo

  • Kontakt
  • Impressum
  • Sitelinks