Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (79) (entfernen)
Sprache
- Englisch (50)
- Deutsch (19)
- Mehrsprachig (10)
Schlagworte
- Rheology (20)
- Cement (17)
- Concrete (9)
- Rheologie (8)
- Africa (6)
- Superplasticizers (5)
- Hydration (4)
- Polysaccharides (4)
- Proficiency testing (4)
- Round robin (4)
- Selbstverdichtender Beton (4)
- Self-compacting concrete (4)
- DFG SPP 2005 (3)
- Metakaolin (3)
- Polycarboxylate ether (3)
- Rice husk ash (3)
- Yield stress (3)
- Admixtures (2)
- Adsorption (2)
- Basic oxygen furnace slag (2)
- Baustoffe (2)
- Cement hydration (2)
- Characterization (2)
- Depletion force (2)
- Diutan gum (2)
- Engineered recycled mineral admixtures (2)
- Fließmittel (2)
- Fly ash (2)
- Frischbetoneigenschaften (2)
- Portland cement (2)
- Quality control (2)
- Robustheit (2)
- Robustness (2)
- SCC (2)
- SVB (2)
- Stabilising agent (2)
- Starch ether (2)
- Superplasticizer (2)
- Supplementary cementitious materials (2)
- Temperatur (2)
- Temperature (2)
- Urban heat island (2)
- Viscosity (2)
- Viscosity modifying agents (2)
- Workability (2)
- Zusatzmittel (2)
- AOQL (1)
- Acoustic emission (1)
- Admixture (1)
- Ageing (1)
- Agglomeration (1)
- Aggregates (1)
- Agricultural by-product (1)
- Allgemeines (1)
- Alterung (1)
- Bauausführung (1)
- Baustellenanwendung (1)
- Beschleunigungssensoren (1)
- Beschleunigungssensorik (1)
- Beton (1)
- Betonpflasterstein (1)
- Betonpflastersteine (1)
- Betontechnologie (1)
- Bio-based concrete (1)
- Biopolymers (1)
- Box-Behnken (1)
- Building with earth (1)
- C3A (1)
- CFD simulation (1)
- CO2 reduction (1)
- CUSUM (1)
- Calcined clay (1)
- Carbon dioxide emissions (1)
- Carbon footprint (1)
- Casting (1)
- Cement paste (1)
- Cement testing (1)
- Cementitious materials (1)
- Charge density (1)
- Chemical admixtures (1)
- Circular economy (1)
- Climate (1)
- Coarsely dispersed systems (1)
- Compatibility (1)
- Compressed earth (1)
- Compressive strength (1)
- Concrete paving stone (1)
- Conformity (1)
- Control charts (1)
- Crack Detection (B) (1)
- Cusum method (1)
- Decarbonisation (1)
- Decision matrix analysis (1)
- Demolition wastes (1)
- Dye (1)
- EN 12350-11 (1)
- EN 206 (1)
- EN 206:2014 (1)
- Early cement hydration (1)
- Education (1)
- Environment (1)
- Faseroptische Sensorik (1)
- Fibers (1)
- Fibre Reinforcement (E) (1)
- Fire spalling (1)
- Fließgrenze (1)
- Fließmittel Betontechnologie (1)
- Fluorescence (1)
- Free polymer (1)
- Frost salt attack (1)
- Frühe Zementhydratation (1)
- Future‑oriented standards (1)
- Gesteinskörnung (1)
- Green urban construction (1)
- Grout (1)
- Grouting (1)
- HRWRA (1)
- Hitzeinsel (1)
- Hochfester Beton (1)
- Hochleistungsbeton (1)
- Hydration kinetics (1)
- Impacts (1)
- Interlaboratory test (1)
- Ionic stregth (1)
- Iron ore tailings (1)
- KUSUM (1)
- Kalksteinmehl (1)
- Konformität (1)
- Kontrollkarten (1)
- Leckage (1)
- Limestone (1)
- Limestone filler (1)
- Limestone powder (1)
- Long-term shrinkage (1)
- Low-carbon construction (1)
- Low-cement concrete (1)
- Mean value criterion (1)
- Method development (1)
- Micro silica (1)
- Microcracking (B) (1)
- Microfiller (1)
- Microsilica (1)
- Mikrofiller (1)
- Mining tailing (1)
- Mining tailings (1)
- Mischungsentwurf (1)
- Mix design (1)
- Mixture composition (1)
- Moisture transport (1)
- Monitoring (1)
- Monitoring von Rohrleitungen (1)
- Nachweis der Wirksamkeit (1)
- Nanopulver (1)
- No slump concrete (1)
- On-Site Application III (1)
- PCE (1)
- PCE-Based superplasticizer (1)
- Packing density (1)
- Packungsdichte (1)
- Partikelgröße (1)
- Pavement (1)
- Penetration test (1)
- Performance tests (1)
- Photoluminescence (1)
- Plastic viscosity (1)
- Polycarboxylate (1)
- Polycarboxylate ether vicat (1)
- Polycarboxylate superplasticizers (PCE) (1)
- Polycarboxylatether (1)
- Polymers (1)
- Pore solution (1)
- Porous medium (1)
- Portland cement Initial hydration (1)
- Potassium ions (1)
- Praxis (1)
- Prüfverfahren (1)
- Qualitätssicherung (1)
- Quartzite mining tailing (1)
- Rammed earth (1)
- Recycled materials (1)
- Recycled mineral admixture (1)
- Reflection spectroscopy (1)
- Reinforcement (1)
- Research policy (1)
- Resource (1)
- Resting time (1)
- Rheological (1)
- Rheological properties (1)
- Rheometry (1)
- Rohrbiegeprüfstand (1)
- Rohrleitung (1)
- SPIN (1)
- Schadensursachen an Rohrleitungen (1)
- Schallemission (1)
- Schallemissionsanalyse (1)
- Schwinden (1)
- Sedimentation (1)
- Selbstkühlend (1)
- Self-Compacting Concrete (1)
- Self-consolidating concrete (1)
- Self-cooling (1)
- Sensitivity (1)
- Setting (1)
- Shewhart (1)
- Shrinkage (1)
- Siebtest (1)
- Slag (1)
- Slump flow (1)
- Sphingan (1)
- Stabilising agents (1)
- Stability (1)
- Stabilizer (1)
- Starch (1)
- Steel slag (1)
- Strength (1)
- Structural build-up (1)
- Sulfate resistant cement (SRC) (1)
- Sulfationengehalt (1)
- Sulphate ion content (1)
- Supplementary cementitious material (1)
- Supplementary cementitous materials (1)
- Suspension (1)
- Sustainability (1)
- Sustainable cement (1)
- Sustainable construction (1)
- Synchrotron (1)
- Technology transfer (1)
- Tensile Properties (C) (1)
- Test setup (1)
- Testing procedure (1)
- Thixotropy (1)
- Ultrasound gel (1)
- Urban heat island effect (1)
- Versuche (1)
- Verteilte Faseroptische Sensorik (1)
- Verteilten akustischen faseroptischen Sensorik (1)
- Vicat (1)
- Viscosity modifying agent (1)
- Viskosität (1)
- Waste management (1)
- Welan gum (1)
- Working mechanism (1)
- XRD (1)
- Zement (1)
- Zerstörungsfreie Prüfung (1)
- Zeta potential (1)
- Überwachung von Rohrleitungen (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (27)
- 7.4 Baustofftechnologie (27)
- 8 Zerstörungsfreie Prüfung (3)
- 1 Analytische Chemie; Referenzmaterialien (2)
- 1.2 Biophotonik (2)
- 2 Prozess- und Anlagensicherheit (2)
- 2.1 Sicherheit von Energieträgern (2)
- 3 Gefahrgutumschließungen; Energiespeicher (2)
- 3.2 Gefahrguttanks und Unfallmechanik (2)
- 7.2 Ingenieurbau (2)
Paper des Monats
- ja (1)
Im Betonbau hat sich im Laufe der vergangenen Jahrzehnte ein grundlegender Wandel von einer Massenanwendung hin zu einer innovativen, zukunftsorientierten und leistungsbasierten Baustofftechnologie vollzogen. Heute besteht Beton nicht mehr lediglich aus Zement, Wasser und Gesteinskörnungen, sondern kann durch die Verwendung von Zusatzstoffen und chemischen Zusatzmitteln signifikant verbessert werden. Der im Bereich der Zusatzmittel erzielte Fortschritt ebnete zudem den Weg für die Entwicklung neuer Betontypen wie zum Beispiel selbstverdichtender Beton (SVB) und Hochleistungsbeton (HLB), indem die Verarbeitbarkeit vom Wasser-Zement-Wert (w/z) abgekoppelt wurde. Während der w/z und die Sieblinie der Gesteinskörnungen bei herkömmlichen Betontypen die für die Verarbeitbarkeit relevanten Mischungsparameter darstellten, weisen SVB und HLB komplexere Leistungsparameter auf; in puncto Leistungsfähigkeit fallen hier insbesondere die Mehlkornkomponenten ins Gewicht. Dadurch wird das System komplexer und zugleich anfälliger für Abweichungen bei der Produktion. Erschwert wird die Identifizierung möglicher Einsparpotenziale durch die Schwierigkeit der Vorhersage der Auswirkungen von Veränderungen im Produktionsprozess und bei der Mischung.
Schäden an Rohrleitungen können zu hohen Umweltbelastungen und wirtschaftlichen Schäden führen. Um die dauerhafte Verfügbarkeit der Infrastruktur zu gewährleisten, wird im Rahmen des Projekts AGIFAMOR an der Bundesanstalt für Materialforschung und -prüfung (BAM) erprobt, inwiefern das Verfahren der verteilten akustischen faseroptischen Sensorik (Distributed acoustic sensing – DAS) zur kontinuierlichen Überwachung von Rohrleitungen eingesetzt werden kann. Neben der DAS werden erprobte Verfahren der zerstörungsfreien Prüfung wie Schallemissionsanalyse (SEA) und Beschleunigungssensoren eingesetzt. An dieser Stelle soll detailliert auf die Hauptschadensursachen an Rohrleitungen, den Versuchsstand zur mechanischen Belastung von Rohren sowie die Möglichkeiten zu Untersuchungen im Realmaßstab eingegangen werden.
In der Prozessindustrie werden häufig gefährliche Stoffe eingesetzt, so dass auch kleinste Leckagen der medienführenden Anlagenteile zu Gefährdungen der Arbeitnehmer sowie zur Belastung der Umwelt führen können. Für die Gewährleistung einer dauerhaften Verfügbarkeit der Infrastruktur ist die frühzeitige Erkennung und Ortung von potentiell gefährlichen Veränderungen an den Wandungen von Rohrleitungen und Behältern (in Form von Rissen, Pittings und Ablagerungen) erforderlich. Am Beispiel von Rohrleitungen, sollen im Rahmen des Projekts AGIFAMOR an der Bundesanstalt für Materialforschung und -prüfung (BAM), im Sinne einer Machbarkeitsstudie die Verfahren der verteilten akustischen und faseroptischen Sensorik zur kontinuierlichen Überwachung und Detektion potentiell gefährlicher Veränderungen in Industrieanlagen erprobt und qualifiziert werden. Dabei sollen die Applikation der optischen Sensorfasern hinsichtlich der Signalübertragung auf den Sensor optimiert und die Erkennung der für dieses Anwendungsgebiet relevanten Schallsignaturen entwickelt werden. Mithilfe eines solchen Messsystems können mit geringem Aufwand ausgedehnte Strukturen, auch unter erschwerten Bedingungen (z.B. hohe Temperatur, Einfluss von Chemikalien) kontinuierlich überwacht werden.
Schäden an Rohrleitungen können zu hohen Umweltbelastungen und wirtschaftlichen Schäden führen. Um die dauerhafte Verfügbarkeit der Infrastruktur zu gewährleisten, wird im Rahmen des Projekts AGIFAMOR an der Bundesanstalt für Materialforschung und -prüfung (BAM) erprobt, inwiefern das Verfahren der verteilten akustischen faseroptischen Sensorik (Distributed acoustic sensing - DAS) zur kontinuierlichen Überwachung von Rohrleitungen verwendet werden kann. Neben der DAS werden erprobte Verfahren der zerstörungsfreien
Prüfung wie Schallemissionsanalyse (SEA) und Beschleunigungssensoren eingesetzt. An dieser Stelle soll detailliert auf die unterschiedlichen Messverfahren und deren spezifischen Einsatz im Rahmen des Projektes eingegangen werden.
Viscosity modifying agents: Key components of advanced cement-based materials with adapted rheology
(2022)
Viscosity modifying agents (VMAs) are essential ingredients for the production of flowable cement-based materials. This paper presents an overview of commonly used VMAs and attempts to shed some light on the underlying physics at the origin of their mechanisms of action. The main molecular parameters of VMA controlling the rheological properties of the cement pore solution are highlighted. As the mechanisms of action of VMAs in cement-based materials are closely related to their affinity with the surface of cement particles, the adsorption of the main VMA types is discussed. The effect of VMAs on flow properties and stability of cement-based materials is presented for VMAs added without any superplasticizer, and then in systems incorporating both VMAs and superplasticizers. Finally, the effect of VMAs in enhancing concrete properties to secure adequate performance of different construction applications, and perspectives for future developments of novel cement-based materials made with VMAs are showcased.
The effect of resting time on the rheological properties of cement suspensions is generally explained by early formed structure and overconsumption of polycarboxylate superplasticizers (PCEs). In this paper, we propose that the influence of resting time on the rheological properties is closely related to size variation of non-absorbed PCE. To identify this, glass bead suspensions were prepared with various amounts of PCE and ionic solution, and their rheological properties were evaluated at various times. We found that the yield stress increases with time at higher PCE concentrations and higher ionic strength solutions. Adsorbed PCE during resting tends to bridge the particles rather than disperse them. In addition, it was found that hydrodynamic radius of PCE increased with resting time, and depletion forces resulting from non-absorbed PCE size changes correlate well with the increased yield stress.
Selbstverdichtender Beton verhält sich unter Temperatureinfluss anders als Normalbeton, da die Rheologie neben der fortschreitenden Hydratation zusätzlich durch die von der Zeit und dem Hydratationsfortschritt abhängige Adsorption von Fließmitteln beeinflusst wird. Anhand rheometrischer Betonversuche an SVB unterschiedlicher Entwurfskonzepte mit variierter anionischer Ladungsdichte im Fließmittel wird verdeutlicht, dass mehlkornreiche SVB bei niedrigen Temperaturen sehr robust sind, während bei hohen Temperaturen mehlkornärmere Entwürfe zu bevorzugen sind. Darüber hinaus wird gezeigt, wie sich unterschiedliche Fließmittelmodifikationen in bestimmten Temperaturbereichen verhalten. Anhand des Wasser-Feststoff-Verhältnisses und des Adsorptionsverhaltens von Fließmitteln werden die maßgeblichen Prozesse erläutert und Möglichkeiten für die Entwicklung robuster Mischungen für individuelle Temperaturbereiche aufgeführt.--------------------------------------------------------------------------------------------------------------------------------------------------------------
Regarding the temperature dependent performance, self-compacting concrete (SCC) distinguishes from normal concrete, since its rheology does not only depend upon the hydration itself but supplementary upon the adsorption of superplasticizers, which is affected by the time and the hydration progress. Based on rheometric concrete investigations with different SCC mixture compositions and varied anionic charge densities of the superplasticizers, it is shown that SCC, which is rich in powder components, shows robust performance at low temperatures, while compositions with lower powder contents are favourable at high temperatures. Furthermore, the performance of different superplasticizer modifications at different temperature ranges is demonstrated. The relevant processes are explained by means of the water to powder ratio as well as the adsorption behaviour of superplasticizers, and options for the development of robust mixture compositions for individual temperature ranges are itemised.
This paper presents the analysis of crack propagation in strain-hardening cement-based composite (SHCC) under tensile and flexural load by using acoustic emission (AE). AE is a non-destructive technique to monitor the development of structural damage due to external forces. The main objective of this research was to characterise the cracking behaviour in SHCC in direct tensile and flexural tests by using AE. A better understanding of the development of microcracks in SHCC will lead to a better understanding of pseudo strain-hardening behaviour of SHCC and its general performance. ARAMIS optical deformation analysis was also used in direct tensile tests to observe crack propagation in SHCC materials. For the direct tensile tests, SHCC specimens were prepared with polyvinyl alcohol (PVA) fibre with three different volume percentages (1%, 1.85% and 2.5%). For the flexural test beam specimens, only a fibre dosage of 1.85% was applied. It was found that the application of AE in SHCC can be a good option to analyse the crack growth in the specimens under increasing load, the location of the cracks and most importantly the identification of matrix cracking and fibre rupture or slippage.
Self-compacting concrete (SCC) differs substantially from normal concrete as regards the quantity of superplasticiser dosage. The functionality of superplasticisers, based on the polycarboxylate ether (PCE) superplasticiser customary with SCC, is nowadays very well understood at construction material research level. However, knowledge concerning pertinent correlations does not always permeate practice to an equal extent. PCEs are extremely polymorphic as opposed to earlier superplasticiser groups, which still possess a considerable proportion of the superplasticiser market. The geometry of polymers can be adjusted individually to performance characteristics required for certain uses. Yet, in selecting a superplasticiser for its specified rheological properties, a very strong influence can equally be exerted simultaneously on the subsequent hydration process. The charge density of the PCE employed also plays a key role in connection with both rheology and early hydration.
This paper presents the results of an interlaboratory study of the rheological properties of cement paste and ultrasound gel as reference substance. The goal was to quantify the comparability and reproducibility of measurements of the Bingham parameters yield stress and plastic viscosity when measured on one specific paste composition and one particular ultrasound gel in different laboratories using different rheometers and measurement geometries.
The procedures for both in preparing the cement paste and carrying out the rheological measurements on cement paste and ultrasound gel were carefully defined for all of the study’s participants. Different conversion schemes for comparing the results obtained with the different measurement setups are presented here and critically discussed. The procedure proposed in this paper ensured a reasonable comparability of the results with a coefficient of variation for the yield stress of 27% and for the plastic viscosity of 24%, despite the individual measurement series’ having been performed in different labs with different rheometers and measurement geometries.
The existing cement and concrete standards are not capable of making full use of the current technology capacity due to strong focus on conventional concrete and thus they are not fit for the current and future challenges of construction industry. The paper highlights shortcomings with regard to the implementation of the existing standards. It can be seen that future-oriented standards are generally required to contribute to a lower-carbon footprint of the industry. These changes are significantly more relevant in sub-Saharan Africa, due to the rapidly increasing urbanisation challenge and the enormous potentials to develop lower-carbon technologies than elsewhere in the world.
The built environment significantly impacts the health of individuals and populations in various ways. The health and durability of the built environment are intertwined with availability ofnaturally occurring and man-made resources and their supply chains. Therefore, resource con servation is a key to ensure sustainability of built environments. Many industrial wastes can be turned into valuable resources for reuse in construction of the built environment. For instance, biowaste (woody/ leafy biomass and animal waste) have been used to make construction adhesives (Fini et al., 2011), some urban wastes have been used in road construction (Poulikakos et al., 2017; Schmidt et al., 2021), end of life plastics and polymers have made their way to roadway construction, bio-oils and algae harvested from wastewater treatment plants has been used to make antiaging for outdoor building elements to mitigate UV aging (Kabir et al., 2021); sulfur has been used as an extender in asphalt and recycled mineral powders such as silica and alumina have been used to increase strength and durability against acidic compounds (Fini et al., 2019). These are just a few examples of recycling venues with beneficial uses in the built environment.
The construction and operation of the built environment and the traffic that it attracts or facilitates significantly contribute to the emis sion of greenhouse gasses (GHG) and cause air pollution. The direct and indirect impacts of GHG and air pollutants on the environment and so cieties have been weil established. The built environment can be used as a powerful platform not only for recycling and resource conservation but also to remove near-ground gaseous contaminants. This can be done via tailored design and engineering of adsorptive construction materials via recycling of waste materials. For instance, advanced sorbent systems can be made for removing C02, H2S, and formaldehyde from air. This re quires tailored sorbent design, topology optimization, and catalytic conversion of collected gaseous compounds to name a few.
This special issue covers innovative materials, methods, and man agement practices which aim to simultaneously address durability ofthe built environment, air quality, resource conservation, and supply chain resilience. Such innovative materials, methods, and management prac tices will transform the built environment into not only an active contributor to no waste, no pollution for healthy environment, but also a medium that converts the waste and pollution into beneficial products for use in the built environment, thereby promoting resource conser vation. Followings are examples of topics that the special issue is interested in:
• Venuses to advance resource conservation specifically via novel ap proaches in the built environment.
• Innovative construction materials for passive or active adsorption of harmful gaseous emissions to conserve air, energy, and water.
• Advanced materials, methods, and management practices to pro mote well-being of the built environment.
• Smart buildings to promote resource conservation.
• Research convergence in the built environment for zero waste, zero pollution economy.
Grouts have numerous applications in construction industry such as joint sealing, structural repair, and connections in precast elements. They are particularly favoured in rehabilitation of structures due to penetrability and convenience of application. Grouts for repair applications typically require high-performance properties such as rapid strength development and superior shrinkage characteristics. Sometimes industrial by-products referred as supplementary cementitious materials (SCM) are used with neat cement due to their capabilities to provide binding properties at delayed stage. Micro silica, fly ash and metakaolin are such SCMs, those can modify and improve properties of cement products. This study aims at investigating long-term mass loss and linear shrinkage along with long-term compressive and flexural strength for grouts produced from ultrafine cement and SCMs. A series of mixtures were formulated to observe the effect of SCMs on these grout properties. Properties were determined after 365 days of curing at 23oC and 55% relative humidity. The effect of SCMs on the properties are characterised by statistical models. Response surfaces were constructed to quantify these properties in relation to SCMs replacement. The results suggested that shrinkage was reduced by metakaolin, while micro silica and fly ash had positive effects on compressive and flexural strength, respectively.
While today, engineers can choose from a wide range of rheology modifying admixtures, in some parts of the world, these are difficult to access, due to their complex processing. However, alternatives can be bio‐based polymers such as polysaccharides from various sources. These are easily accessible all over the world, do not demand for complicated processing, and typically they are more sustainable than many established materials, which are crude oil‐based.
The paper presents the effects of acacia gum, cassava starch and the gum of triumfetta pendrata A. Rich on the rheological performance of cementitious systems. It is shown that acacia gum can be as efficient as polycarboxylate based superplasticisers, cassava starch can reduce the yield stress slightly with little effect on the plastic viscosity, and the gum of triumfet ta pendrata A. Rich increases the thixotropy of cement pastes with plasticizing polymers significantly.
The interaction of different charged polymers, namely anionic polycarboxylate
superplasticizer (PCE) and neutral polyethylene glycol (PEG) with potassium ions, and their effect on the yield stress of highly concentrated glass bead suspension (GBS), were studied under different concentrations of potassium ions ([K+]). It was found that, compared to the neutral PEG, the negatively charged PCE can be adsorbed on glass beads (GB), and then decreases the yield stress of GBS. The increasing concentration of free polymer in the interstitial liquid phase with the increased polymer dosage leads to the higher yield stress of GBS, which may be caused by the higher Depletion force. In addition, this effect is also related to the charge density of the polymer and the [K+] in the solution. Along with the increase in [K+], the yield stress of GBS increases significantly with the addition of PCE, but this cannot be observed with PEG, which indicates that potassium ions can interact with negatively charged PCE instead of the neutral PEG. At last, the interparticle Forces between two single GB with adsorbed PCE in solutions containing [K+] and PCE were measured by colloidal probe atomic force microscopy to better understand the interaction of the charged polymer with counterions.
A thorough characterization of starting materials is the precondition for further research, especially for cement, which contains various phases and presents quite a complex material for fundamental scientific investigation. In the paper at hand, the characterization data of the reference cement CEM I 42.5 R used within the priority program 2005 of the German Research Foundation (DFG SPP 2005) are presented from the aspects of chemical and mineralogical compositions as well as physical and chemical properties. The data were collected based on tests conducted by nine research groups involved in this cooperative program. For all data received, the mean values and the corresponding errors were calculated. The results shall be used for the ongoing research within the priority program.