Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (50)
- Zeitschriftenartikel (46)
- Vortrag (18)
- Beitrag zu einem Sammelband (14)
- Forschungsbericht (4)
- Corrigendum (1)
Schlagworte
- Geokunststoffe (25)
- Deponieverordnung (18)
- BAM-Zulassung (8)
- Kunststoffdichtungsbahnen (8)
- Geosynthetics (6)
- Kunststoff-Dränelemente (6)
- Deponie (5)
- Durability (5)
- Scherfestigkeit (5)
- Deponieabdichtungen (4)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (18)
Data are reported from oven aging in air for more than 13 years (!) and from water immersion tests for 6 years at 80 °C on various high-density polyethylene geomembranes (GM) used in landfill lining. The mechanical properties and oxidative induction times (OIT) of the samples were monitored during the long-term testing. Aging behavior in hot air is different from that in hot water. During oven aging a slow, exponential decrease of OIT is observed. Even after 13.6 years there is no indication of an oxidative degradation of the mechanical properties. During immersion in water a strong reduction in OIT occurs within the first year, after which time the curve levels off. Oxidation starts when very low OIT-values are reached after about 5 years at which time the mechanical strength rapidly falls to values below the yield point. We conclude from these data that the service life of HDPE GM's is essentially determined by the slow loss of stabilizers due to migration. The oxidation starts only after the depletion of antioxidants and then quickly leads to brittleness of the sample. However, no complete oxidative deterioration has been observed to date. We estimate by the van't Hoff rule that under normal ambient conditions many centuries will have to pass before the functional mechanical properties of state-of-the-art stabilized HDPE bulk material will be reduced below acceptable limits by oxidative degradation.
Mit Dichtungskontrollsystemen (DKS) werden Konvektionssperren in Oberflächenabdichtungssystemen von Deponien kontrolliert. Die Funktionsfähigkeit eines eingebauten DKS muss in jedem Projekt zuvor überprüft werden. Diese projektspezifische Funktionsprüfung des DKS selbst wird am Beispiel der Verwendung mit einer Kunststoffdichtungsbahn (KDB) diskutiert. Der grundsätzliche Aufbau, die zugrunde liegenden Messprinzipien und das Ziel der Prüfung werden vorgestellt. Die Anforderungen an die nach der Deponieverordnung (DepV) zugelassenen Systeme hinsichtlich Betrieb, Leitungsfähigkeit und Konstruktion werden beschrieben. Dabei wird auf die Vorgaben der Richtlinie, die einer Zulassung zugrunde liegt, eingegangen. Das mögliche Vorgehen bei der projektspezifischen Kontrollprüfung im Hinblick auf Aspekte wie Vorgehensweise, Zeitpunkt und Randbedingungen sowie äußere Einflussfaktoren werden diskutiert.--------------------------------------------------------------------------------------------------------------------------------------------------------------
Leak detection systems (LDS) are used to control tight barriers in landfill cover systems. However, the efficiency of the installed LDS itself has to be verified in every landfill construction project. As an example the efficiency test for LDS used in connection with geomembranes is discussed in detail. The basic principles, the measuring techniques and objectives of the efficiency testing are described. The requirements for a certification of LDS under the terms of the new German landfill ordinance with regard to operation, capability and design are listed. The conditions necessary for a certification of LDS are introduced. Possible project related efficiency testing procedures with respect to the scope, time of convenience, general conditions as well as external influencing factors are discussed.
Ober die europäischen Produktnormen für Geokunststoffe (hEN) wird gestritten: Dienen sie nur einem einheitlichen Verfahren der CE-Kennzeichnung oder werden darin alle relevanten geotechnischen Eigenschaften so verbindlich festgelegt, dass darüber hinausgehende nationale Vorschriften ungültig werden? Der Streit wurde durch ein Urteil des Europäischen Gerichtshofs weiter angefacht. Davon noch nicht betroffen ist der Deponiebau. Die Deponie ist ein besonderes Bauwerk, bei dem vor allem abfallrechtliche Regelungen beachtet werden müssen. In der deutschen Deponieverordnung wurde daher eine mit der Europäischen Kommission abgestimmte Gleichwertigkeitsklausel für CE-gekennzeichnete Bauprodukte verankert, die diese Besonderheit berücksichtigt. Wir zeigen, dass das in den hEN festgelegte Eigenschaftsspektrum der Bauprodukte im Wesentlichen nicht gleichwertig zu dem Spektrum ist, das sich aus den Anforderungen der Deponieverordnung ergibt. Die Qualitätssicherung der hEN, die nur eine zertifizierte werkseigene Produktionskontrolle jedoch keine Fremdüberwachung vorsieht, entspricht ebenfalls nicht den Anforderungen der Deponieverordnung. Eine CE-Kennzeichnung kann daher eine BAM-Zulassung nicht gleichwertig ersetzen. Auch für andere geotechnische Anwendungsgebiete gilt, dass die geltenden hEN die Geokunststoffe nicht ausreichend charakterisieren. Die Antwort auf die Frage, wie verbindlich diese mangelhaften hEN werden könnten, ist daher von weitreichender Bedeutung für die gesamte Geotechnik.
The German landfill ordinance regulates the use of geosynthetics, polymers and leak detection systems (LDS) in the field of landfill engineering in Germany. It governs the certification process and sets a framework for the requirements on these products. The certification guidelines of the BAM Federal Institute of Materials Research and Testing turn these requirements into detailed technical specifications and associated test procedures. The present paper describes the procedure of developing certification guidelines for LDS by BAM and its advisory board. The requirements for the certification of LDS under the terms of the new German landfill ordinance with regard to operation and capability are listed and the technical criteria are described. The performance test for LDS used in connection with geomembranes is discussed in detail.
Geomembranes used in basal liner systems of landfills must not be damaged by the coarse gravel of the standard drainage layer. Therefore, the geomembrane must be protected against mechanical damage and strain by means of a suitable protective layer. The main requirements for this protective layer as well as the long-term durability of the mineral and geotextile components are compiled in the guideline recently released by German authorities. An overview is given on the existing types of protective layer systems with the state-of-the-art testing, the requirements and selected results of related research programs.