Filtern
Dokumenttyp
Schlagworte
- BAM-Liste (14) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (3)
Tanks for all seasons
(2004)
Beständigkeitsbewertungen von Werkstoffen für den Transport von Gefahrgütern durch die BAM-Liste
(2005)
Alloy 59 (NiCr23Mo16Al) with a lot of chromium, molybdenum and nickel possesses excellent resistance not only to reducing but also oxidizing chemicals. Both the Nickel alloy 59 and the superaustenitic steel alloy 31 have already been used as shell materials for tank vehicles or tank containers. Use of these alloys allows the transport of a signifi-cantly more wider variety of chemicals and, especially, waste mixtures than the use of common aus-tenitic steels. Another advantage is the extension of test intervals of for transport tanks. In Germany the 'BAM-List – Requirements for Tanks for the Transport of Dangerous Goods' is the basis for substance-related prototype approvals for tank containers designed for the carriage of dangerous goods issued by the Federal Institute for Materials Research and Testing (BAM). Com-patibility evaluations of selected metallic material groups as well as polymeric gasket and lining materials under the influence of approximately 7000 dangerous goods and water-polluting sub-stances are published in the BAM-List. Alloy 59 belongs to the group of metallic materials in the BAM-List. Due to the large number of dangerous goods in the BAM-List BAM, IKS Dresden and ThyssenKrupp VDM performed a comprehensive corrosion test programme with welded specimens of the nickel alloy 59 and the superaustenitic steels alloy 926 and alloy 31 in the period 2002 - 2010. Especially In particular alloy 59 and alloy 31 were exposed to a large number of corrosive sub-stances such as various mixtures of both nitric acid/sulphuric acid and nitric acid/phosphoric acid at 55 °C. Other corrosive test substances were different organic and inorganic halogenides, peroxyace-tic acid and molten substances. In the case of molten chemicals such as monochloroacetic acid the test temperature was increased to more than 100 °C. The test results presented in this paper are al-ready included in the 10th edition of the BAM-List and, therefore, available to the customer.
Evaluation of the resistance of alloy 31 and alloy 59 for the transport of mixed acids in tanks
(2007)
Duplex als Alternative
(2011)
Use of higher-alloyed metallic materials and duplex steels for transport tanks of dangerous goods
(2011)
Compatibility evaluations of selected metallic materials under the influence of dangerous goods are published in the BAM-List - Requirements for Tanks for the Transport of Dangerous Goods” as basis for substance-related prototype approvals for tank Containers designed for the carriage of dangerous goods.
There is a request of the tank manufacturing industry and transportation Companies to incorporate additional materials into the BAM-List, especially corrosion-resistant materials because of the large number of corrosive dangerous goods. One solution to solve corrosion Problems is to line the tank with a polymer, an alternative solution is the application of high-alloyed stainless steels and nickel-based alloys as there are 1.4529 (XINiCrMoCu 25-20-7, alloy 926), 1.4562 (X1NiCrMoCu32-28-7, alloy 31) and 2.4605 (NiCr23Mo16AI, alloy 59).
There is an interest to use cost-efficient steels with high strength values and concomitant adequate corrosion resistance such as duplex steel 1.4362 (X2CrNiN23-4).
This steel grade was originally developed as a substitute for the austenitic grades 1.4404 (X2CrNiMo17-12-2) and 1.4571 (X6CrNiMoTi17-12-2). Due to the lower content of the alloy elements nickel and molybdenum this duplex steel is a cost-efficient alternative to molybdenum containing austenite.
Due to the limited number of corrosion test results with welded test samples of these high-alloyed materials and the duplex steel under the influence of corrosive dangerous goods a comprehensive test Programme was performed with these materials in Cooperation with ThyssenKrupp VDM and Deutsche Edelstahlwerke GmbH. It can be concluded from the test results that the superaustenitic steels 1.4529 and 1.4562 as well as the nickel-based alloy 2.4605 are a really good alternative as tank materials for the transport of dangerous goods in comparison to the lining of the tanks. The nickel-based alloy 2.4605 shows the best resistance and is suitable as material for tanks transporting all tested corrosive substances. One exception is the temperature limit during the transport of hydrochloric acid.
The superaustenit 1.4562 is a resistant material with a wide ränge of application. Exceptions for use are: ammonium bifluoride, brine, 34 % calcium Chloride solution, hydrochloric acid, perchloric acid, 90 % 2-chloropropionic acid, nitrating acid with nitric acid content > 50 % and molten monochloroacetic acid. The alloy is limited suitable for allyl Chloride, aluminum Chloride, copper (II) -Chloride and ferric Chloride. The superaustenit 1.4529 showed the lowest resistance compared to the other two materials. This steel is not resistant in hydrochloric acid, perchloric acid, sodium Chlorite and sodium hypochlorite. The application is limited in the concentration ränge of aqueous Solutions of aluminum Chloride, copper (II) Chloride and ferric Chloride. Due to the reduced alloying content of the duplex steel 1.4362 (X2CrNiN23-4) compared to the austenitic CrNiMo-steels, a lower resistance especially in acidic media like formic, acetic or sulfuric acid was observed. Within the more than 7.000 substances contained in the BAM-List there is a large amount of dangerous goods such as hydrocarbons, alcohols, aldehydes, ketones, ethers, esters, and inorganic alkaline substances which have a large transport volume and do not corrode the duplex steel 1.4362 (X2CrNiN23-4).
The test results are included in the actual 11th edition of the BAM-List and therefore available for the costumer.
Die BAM-Liste - Anforderungen an Tanks für die Beförderung gefährlicher Güter – mit den Beständigkeitsbewertungen metallischer und polymerer Werkstoffe ist Grundlage für die stoffbezogenen Baumusterzulassungen für Tankcontainer und ortsbewegliche Tanks zur Beförderung gefährlicher Güter durch die BAM seit der Herausgabe der 1. Auflage 1989. Diese Beständigkeitsbewertungen werden nicht nur bundesweit, sondern weltweit als Erkenntnisquelle genutzt. Für die Zulassung von Kesselwagen und Tankfahrzeugen werden diese Daten auch herangezogen. Die Werkstoffbeständigkeitsdaten und der damit verbundene Informationsservice der BAM haben mit Sicherheit dazu beigetragen, Leckagen von Tanks aufgrund des Einsatzes von Tanks/Kesselwagen aus einem gegenüber dem Füllgut unbeständigem Tankwerkstoff oder Dichtungswerkstoff zu vermeiden.
Die BAM-Liste - Anforderungen an Tanks für die Beförderung gefährlicher Güter – mit den Beständigkeitsbewertungen metallischer und polymerer Werkstoffe ist Grundlage für die stoffbezogenen Baumusterzulassungen für Tankcontainer und ortsbewegliche Tanks zur Beförderung gefährlicher Güter durch die BAM seit der Herausgabe der 1. Auflage 1989. Diese Beständigkeitsbewertungen werden nicht nur bundesweit, sondern weltweit als Erkenntnisquelle genutzt. Für die Zulassung von Kesselwagen und Tankfahrzeugen werden diese Daten auch herangezogen. Die Werkstoffbeständigkeitsdaten und der damit verbundene Informationsservice der BAM haben mit Sicherheit dazu beigetragen, Leckagen von Tanks aufgrund des Einsatzes von Tanks/Kesselwagen aus einem gegenüber dem Füllgut unbeständigem Tankwerkstoff oder Dichtungswerkstoff zu vermeiden.
In der Bundesrepublik Deutschland werden über 400 Mio.t Gefahrgüter jährlich in Tankfahrzeugen, Aufsetztanks, Batteriefahrzeugen, Eisenbahnkesselwagen und Tankcontainern befördert, davon etwa 150 Millionen Tonnen im Straßengüterverkehr. Zu den Hauptschadensursachen zählt die Korrosion, wobei die gleichmäßige und ungleichmäßige Flächenkorrosion die Korrosionsart ist, die beim Chemikalientransport in Tanks am häufigsten auftritt. Viele Schäden durch Lochkorrosion entstehen beim Transport von chloridhaltigen Medien bei Anwesenheit von Feuchtigkeit.
Die BAM-Liste - Anforderungen an Tanks für die Beförderung gefährlicher Güter - ist Grundlage für die stoffbezogenen Baumusterzulassungen für Tankcontainer und ortsbewegliche Tanks zur Beförderung gefährlicher Güter durch die BAM seit der Herausgabe der 1. Auflage 1989. In die BAM-Liste wurden vorrangig solche gefährlichen Güter aufgenommen, die potenziell in Tanks befördert werden können. Die Beständigkeitsbewertungen gebräuchlicher metallischer Tankwerkstoffe und polymerer Dichtungs-, Beschichtungs- und Auskleidungswerkstoffe werden auch bei der Zulassung von Kesselwagen und Tankfahrzeugen als Erkenntnisquelle verwendet. Diese Daten sind aber unter sorgfältiger Überprüfung der Übertragbarkeit auch für andere praktische Anwendungen und unter Berücksichtigung der jeweiligen Praxisbedingungen auch als Ratgeber für Verpackungen, IBC, Lagerbehälter, Rohrleitungen usw. aus metallischen Werkstoffen anwendbar.
In den internationalen Gefahrgutverordnungen ADR, RID und IMDG-Code wird nach einer vorgegebenen Prüffrist eine innere Besichtigung der Tanks gefordert. Bei Tankcontainern beträgt diese Prüffrist im ADR/RID, Kap. 6.8 , fünf Jahre (bei der Beförderung von ortsbeweglichen Tanks nach ADR/RID, Kap. 6.7, und nach dem IMDG-Code 2½ Jahre) und bei Tankfahrzeugen sechs Jahre. Im RID wird für Eisenbahnkesselwagen eine Prüffrist von acht Jahren für die Innenbesichtigung vorgeschrieben. Für die Dauer der Prüfintervalle muss die Werkstoffbeständigkeit der Tankwerkstoffe gewährleistet sein.