Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (27)
- Beitrag zu einem Tagungsband (6)
- Forschungsbericht (3)
- Beitrag zu einem Sammelband (2)
- Monografie (1)
- Buchkapitel (1)
Schlagworte
- Cement (5)
- Concrete (4)
- Dust explosions (3)
- Gas explosions (3)
- Hybrid mixtures (3)
- Africa (2)
- Analysis (2)
- CO2/N2 ratio (2)
- Dye (2)
- Fluorescence (2)
- Gas diffusion layer (GDL) (2)
- Inerting effect (2)
- Minimum ignition temperature (2)
- Optical probe (2)
- Sensor (2)
- Standardization (2)
- Air coupled ultrasound (1)
- Asymmetric catalysis (1)
- Basic oxygen furnace slag (1)
- Batteries (1)
- Biochar (1)
- Biopolymers Probes (1)
- Brandbekämpfung (1)
- Branderkundung (1)
- Building material (1)
- Calibration (1)
- Calorimetry (1)
- Casting environment (1)
- Cement paste (1)
- Central Asia (1)
- Combustion kinetics (1)
- Compression (1)
- Compression device (1)
- Condensation particle counter (CPC) (1)
- Construction (1)
- Covalent Organic Frameworks (1)
- Crystallization (1)
- Cyanine (1)
- Diffuse (1)
- Digitalisierung (1)
- Durability (1)
- EXAFS (1)
- Enantioselective Hydrogenation (1)
- Explosion characteristics (1)
- Explosion criterion (1)
- Explosionsschutz (1)
- Fe-Ni alloy (1)
- Fe-ZSM-5 (1)
- Flourescence (1)
- Flourescin (1)
- Gas diffusion layer (1)
- Genetics (1)
- Geometrical tortuosity (1)
- Graphit (1)
- Hackathon (1)
- Hr- and Solid State NMR-Spectroscpy (1)
- Hybride Gemische (1)
- Hybridization (1)
- Hydration (1)
- Hydrocarbons (1)
- Hydrogenation (1)
- Hydrophobic treatment (1)
- Hydrothermal systems (1)
- Interlaboratory comparison (1)
- Interlaboratory test (1)
- Inverse Design (1)
- Iron oxide (1)
- Isobutane (1)
- Key comparison (1)
- Kinetics (1)
- Kohlebrände (1)
- Kunststoffschicht (1)
- Large Language model (1)
- Laserreinigung (1)
- Latentwärmespeicher (1)
- Life cycle thinking (1)
- Low-cement concrete (1)
- Lower explosion limit (1)
- MITC (1)
- MOUSE (1)
- Materialforschung (1)
- Measurement uncertainties (1)
- Mechanism (1)
- Mechanism model (1)
- Mesoporous films (1)
- Method (1)
- Microbead (1)
- Microbead array (1)
- Microfluidic (1)
- Microscopy (1)
- Microstructure (1)
- Minimum explosible concentration (1)
- Mobility particle size spectrometer (MPPS) (1)
- Monitoring (1)
- Multiplex (1)
- Mössbauer spectroscopy (1)
- NAMUR (1)
- Nano (1)
- Nanometerbereich (1)
- Nanostructure (1)
- Normung (1)
- Numerical solutions (1)
- Optical spectroscopy (1)
- Orchestration (1)
- PCE (1)
- PCR (1)
- PEM fuel cell (1)
- PH (1)
- Packing density (1)
- Particle (1)
- Phase (1)
- Photophysics (1)
- Pigments (1)
- Plasmaverfahren (1)
- Pore size analysis (1)
- Powder Diffractometry (1)
- Prediction (1)
- Probekörper (1)
- Process monitoring (1)
- Products and production systems (1)
- Prozessanalytik (1)
- Prozessindustrie (1)
- Pulse compression (1)
- Pulsed THz radiation system (1)
- Quality assurance (1)
- Quantification (1)
- Quantum yield (1)
- Quartzite mining tailing (1)
- Reaction mechanisms (1)
- Real-time (1)
- Recycled mineral admixture (1)
- Reflection (1)
- Resource efficiency (1)
- Rheology (1)
- Rheometry (1)
- Rhodium (1)
- Rhodium-Phosphor-Complex (1)
- Ring test (1)
- SAXS (1)
- SPIN (1)
- Schichtdicke (1)
- Sensorik (1)
- Sicherheitstechnische Kenngrößen (1)
- Silk Road (1)
- Standards (1)
- Supplementary cementitious materials (1)
- Synchrotron (1)
- Synchrotron Tomography (1)
- Synchrotron X-ray tomography (1)
- THz imaging (1)
- Technologie-Roadmap Prozess-Sensoren (1)
- Temperature-programmed reduction (1)
- Test setup (1)
- Testing procedure (1)
- Time domain spectroscopy (1)
- Tortuosity (1)
- Traceability (1)
- Ultrasound gel (1)
- Uncertainty (1)
- Underground coal fires (1)
- Verrußung (1)
- Volatile matter content (1)
- Wall paintings (1)
- Wandmalerei (1)
- Water transport (1)
- Water transport path (1)
- X-ray tomography (1)
- XRD (1)
- deNOx (1)
Organisationseinheit der BAM
- 2 Prozess- und Anlagensicherheit (6)
- 2.1 Sicherheit von Energieträgern (6)
- 1 Analytische Chemie; Referenzmaterialien (4)
- 1.2 Biophotonik (2)
- 7 Bauwerkssicherheit (2)
- 7.4 Baustofftechnologie (2)
- 1.0 Abteilungsleitung und andere (1)
- 1.4 Prozessanalytik (1)
- 6 Materialchemie (1)
- 6.5 Synthese und Streuverfahren nanostrukturierter Materialien (1)
An international interlaboratory comparison of the measurement capabilities of four National Metrology Institutes (NMIs) and one Designated Institute (DI) in the determination of the chemical composition of thin Fe-Ni alloy films was conducted via a key comparison (K-67) of the Surface Analysis Working Group of the Consultative Committee for Amount of Substance. This comparison was made using XPS (four laboratories) and AES (one laboratory) measurements. The uncertainty budget of the measured chemical composition of a thin alloy film was dominated by the uncertainty of the certified composition of a reference specimen which had been determined by inductively coupled plasma mass spectrometry using the isotope dilution method. Pilot study P-98 showed that the quantification using relative sensitivity factors (RSFs) of Fe and Ni derived from an alloy reference sample results in much more accurate result in comparison to an approach using RSFs derived from pure Fe and Ni films. The individual expanded uncertainties of the participants in the K-67 comparison were found to be between 2.88 and 3.40 atomic %. The uncertainty of the key comparison reference value (KCRV) calculated from individual standard deviations and a coverage factor (k) of 2 was 1.23 atomic %.
Minimum explosion concentration (MEC) of three agriculture dusts and two coal dusts was studied via a 20-L explosion chamber to reveal the role of gaseous inhibitors. Both active method (CO2 diluting air) and passive method (CO2 replacing O2) were used. The TG and DTG thermal analysis tests were conducted to study the pyrolysis and combustion characteristics of dust samples. An alternative explosion criterion based on combustion duration time was used to determine MEC, and compared with the standardized overpressure method. Under 10-kJ ignition condition, as oxygen mole fraction (XO2) decreased from 21% to 10%, MEC of agriculture dusts and coal dusts respectively increased by around 5 times and 2 times. The active inerting method with a lower N2/CO2 ratio was found to have a better suppression effect on the explosion of the five carbonaceous dusts because the blend has a higher specific heat and a lower oxygen diffusion rate.
Gaseous inhibitors are used in many industries for the explosion prevention of combustible dusts, mitigating the potential hazard to humans, properties and environments. This work experimentally and theoretically studied the inerting effect of gaseous inhibitors on the ignition process of dust clouds in O2/N2/CO2 atmospheres, with an emphasis on the role of the CO2/N2 ratio. 10 different combustible carbonaceous dusts were selected, including grain dust, biomass dust and coal dust. Experimental results showed that the inhibition effect of CO2/N2 is closely related to the ignition mechanism of dust clouds. Specifically, a higher ratio of CO2/N2 yields a stronger inhibition effect on the ignition process of dust samples with relatively low volatile matter contents predominated by heterogeneous ignition. In addition, two novel steady-state ignition mechanism models were developed to interpret the experimental observations. Maxwell-Stefan equations were used to describe the diffusivity in the ternary O2/N2/CO2 gas mixtures. The analytical results were in good agreement with the experimental data of the minimum ignition temperature of dust cloud (MITC) in oxygen-lean atmospheres. The mechanism modelling can be used to estimate the critical ignition temperature of all carbonaceous dust clouds with a wide range of volatile matter content under different inert atmospheres, which will provide a reference for the explosion hazard assessment of dust posed by a hot surface in the process industries.
This paper presents the results of an interlaboratory study of the rheological properties of cement paste and ultrasound gel as reference substance. The goal was to quantify the comparability and reproducibility of measurements of the Bingham parameters yield stress and plastic viscosity when measured on one specific paste composition and one particular ultrasound gel in different laboratories using different rheometers and measurement geometries.
The procedures for both in preparing the cement paste and carrying out the rheological measurements on cement paste and ultrasound gel were carefully defined for all of the study’s participants. Different conversion schemes for comparing the results obtained with the different measurement setups are presented here and critically discussed. The procedure proposed in this paper ensured a reasonable comparability of the results with a coefficient of variation for the yield stress of 27% and for the plastic viscosity of 24%, despite the individual measurement series’ having been performed in different labs with different rheometers and measurement geometries.
Fe-ZSM-5 Catalysts for the Selective Reduction of NO by Isobutane - The Problem of the Active Sites
(2002)
Relations between the structure of FeZSM-5 catalysts prepared by interaction of FeCl3 with HZSM-5 and their catalytic behavior in the SCR of NO by isobutane were investigated by combining results of catalytic studies (1000 ppm NO, 1000 ppm isobutane, and 2% O2 in He, 30,000 h-1) and of physicochemical characterization (XRD, EXAFS, Mössbauer spectroscopy, TPR, IR, XPS). By variation of the preparation conditions (method of FeCl3 introductionchemical vapor deposition or solid-state ion exchange, washing intensity, calcination regime) and of the matrix (HZSM-5 with normal and high defect density), FeZSM-5 materials with strongly varying properties (aggregation degree of the Fe phase, acidity) were obtained. Significant discrepancies between conclusions derived from EXAFS, TPR, and Mössbauer spectroscopy were ascribed to a preference of Mössbauer spectroscopy for the detection of aggregated phases and a high defectivity of Fe oxide clusters formed upon calcination. The critical step for the preparation of a highly disperse Fe phase is extensive washing after Fe introduction. The catalytic behavior of overexchanged FeZSM-5 materials prepared by interaction of FeCl3 with HZSM-5 of normal defect density was not influenced by aggregation of a significant part of the Fe phase. The comparison of their catalytic properties with those of a Fe2O3/HZSM-5 mechanical mixture and of catalysts prepared by aqueous ion exchange or by CVD of FeCl3 into HZSM-5 of high defect density implies that the particular activity of overexchanged FeZSM-5 arises from minority sites. In these, the Fe ions are probably isolated. Other Fe sites of low nuclearity appear to add to the activity. The poor SCR performance (at a given ability for isobutane activation) of FeZSM-5 prepared with a defective ZSM-5 matrix may indicate that the Fe sites which provi de the particular activity of overexchanged FeZSM-5 require the cooperation of acidic sites.
Nanotechnologien werden gegenwärtig als leistungsfähige Oberflächentechniken in erheblichem Umfange industriell genutzt. Dabei spielen dünne Schichten und deren Kenndaten eine wesentliche Rolle, z.B. als Röntgenspiegel oder optische und magnetooptische Datenträger. Die Schichtdicke zählt hierbei zu den technologisch wichtigen Parametern. Abgeleitet von Anwenderinteressen, werden für die Röntgenreflektometrie (XRR bzw. GIXR), Elektronenstrahl-Mikroanalyse (EPMA) und Röntgenfluoreszenzanalyse (XRF) einerseits und die Ellipsometrie andererseits zugeschnittene Schichtdickenmaßverkörperungen (SDM) entwickelt, gefertigt und untersucht. Das Ziel ist die Bereitstellung praxistauglicher, kalibrierter SDM, im weiteren Schichtdickennormale (SDN) genannt. SDN sind Maßverkörperungen, für die der Schichtdickenwert mit einer definierten Messunsicherheit bekannt und auf ein metrologisch anerkanntes Längennormal zurückgeführt ist. Berichtet wird über die Herstellung und messtechnische Charakterisierung der beiden spezifischen Varianten von Maßverkörperungen.
Studienziel: Zwei Nagelsysteme, zum einen der unaufgebohrte Tibianagel mit 3fach-Verriegelung in 2 Ebenen und großem Bolzenspiel (UTN® der Fa. Mathys®) mit der Möglichkeit von medial zweifach und von ventral einfach zu verriegeln und zum anderen der unaufgebohrte Tibianagel mit 3fach-Verriegelung in einer Ebene mit geringem Bolzenspiel (Targon®-Nagel der Fa. Aesculap®), der 3 mediale Verriegelungsmöglichkeiten besitzt, wurden im Biegeversuch statisch geprüft. Anatomisch besteht bei der ventralen Verriegelung immer die Verletzungsmöglichkeit von Sehnen, Nerven und Gefäßen. Andererseits besteht bei einem höheren Bolzenspiel immer ein höherer Instabilitätsgrad. Inwieweit ist die Verriegelung in zwei Ebenen notwendig?
Methode: Wir prüften statisch zwei intramedulläre Verriegelungssysteme an 8 Leichenknochen (matched pairs) in zwei Ebenen an einer Universalprüfmaschine der Firma Schenk-Trebel im Biegeversuch.
Ergebnisse: Die Untersuchungsergebnisse zeigen, dass nicht die Bolzenlage, sondern das so genannte Bolzenspiel für die Stabilität der distalen Fragmente entscheidend ist. Die Verriegelung sollte somit prinzipiell durch ein formschlüssiges winkelstabiles Bolzensystem möglich sein.