Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (41) (entfernen)
Schlagworte
- Drop test (11)
- Drop testing (3)
- Fire (3)
- Measurement methods (3)
- Package (3)
- RAM packages (3)
- Radioactive material (3)
- Testing (3)
- Container (2)
- Drop (2)
Organisationseinheit der BAM
Integrity of the "POLLUX" cask for final disposal: Experimental results of the mechanical tests
(1995)
This paper describes the analytical, numerical and experimental investigations on the phenomenon of
interactions between cask components and content of packages for the transport of radioactive material during drop
tests required according to the IAEA Regulations for the Safe Transport of Radioactive Material.
Radial and axial gaps between cask components and content are usually necessary for thermal reasons but larger
gaps can exist because of the geometrical dimensions of the specified content. Consequently interactions between
content and cask components (lid system, cask body, etc.) are possible and can not be excluded during drop tests.
Interactions in this context are relative movements between cask and content which are mainly due to elastic spring
effects after releasing the cask for the free drop. These relative movements can cause interior collisions between
content and cask during the main impact of the package onto the unyielding target.
Drop tests with various types of Type A and Type B packages fully instrumented with strain gauges and
accelerometers showed that these interactions respectively interior collisions can be considerable relating to high forces
acting on cask lids, lid bolts and the content. Of course the real quantitative consequences of the interactions depend
upon different conditions, among others the drop orientation, the design characteristics of the impact limiters, the
dimensions of the gaps, the material characteristics of the contents, etc. .
In order to investigate more precisely the phenomenon of interactions BAM carried out finite element
calculations for the named casks using the ABAQUS/ Standard and ABAQUS/ Explicit computer code comparing them
with results obtained from experiments. Additionally, tests with a simplified model instrumented with accelerometers
were carried out accompanied by finite element calculations and analytical calculations using MATHEMATICA.
The investigations on the mentioned phenomena of interaction show that they should be considered in approval design
tests and/ or calculations.
ANF-18 - A new transport container for fresh PWR fuel assemblies according to IAEA requirements
(2001)
BAM (Federal Institute for Material Research and Testing) is the competent authority for mechanical and thermal safety assessment of transport packages for spent fuel and high level waste (HLW) in Germany. In context with package design approval of the new German HLW cask CASTOR HAW28M, BAM performed several drop tests with a half-scale model of the CASTOR HAW/TB2. The test model was manufactured by GNS (Gesellschaft fur Nuklear Service mbH) and tested under accident transport conditions on the 200 tons BAM drop test facility at the BAM Test Site Technical Safety. For this comprehensive test program the test specimen CASTOR HAW/TB2 was instrumented at 21 measurement planes with altogether 23 piezo-resistive accelerometers, five temperature sensors and 131 tri-axial strain gauges in the container interior and exterior, respectively. The strains of four representative lid bolts were recorded by four uniaxial strain gauges per each bolt. Helium leakage rate measurements were performed before and after each test in the above noted testing sequence. The paper presents some experimental results of the half-scale CASTOR HAW/TB2 prototype (14,500 kg) and measurement data logging.