Filtern
Dokumenttyp
- Forschungsbericht (2) (entfernen)
Sprache
- Englisch (2)
Referierte Publikation
- nein (2)
Schlagworte
Organisationseinheit der BAM
This report describes the progress in understanding and describing the detectability of the ultrasonic inspection technique developed by SKB for the inspection of copper tubes used for the final disposal of the Swedish spent nuclear fuel. In former research activities dedicated to the different parts of the canister, the probability of detection (POD) evaluation technique, as developed for thin aircraft components, was further developed for the application on complex hick-walled components. The result of this development was the introduction of a “multi-parameter” POD framework. In contrast to taking only the defect size into consideration (as for aircraft components) additional influencing factors, relevant for thick components, such as depth position, orientation and part geometry, were included. Furthermore, the variation of ultrasonic attenuation due to various material properties was included.
A novel approach for rating fatigue-initiating inclusions in highly demanding steel (INCAFAT)
(2018)
INCAFAT project aimed to improve existing fatigue damage models by establishing the most suitable combination of measurement techniques to characterise harmful inclusion populations in highly demanding steels. The different inclusion assessments carried out confirm that, chemical composition, secondary metallurgy and manufacturing route affect content, nature, size and shape of inclusions. According to the FEM model, inclusions produce an alteration of the stress field in their surrounding region, which can promote a fatigue failure. Experimental work on fatigue testing has demonstrated that depending on the stressed direction fatigue failures in highly demanding steels could be produced by different types of inclusions. Fractography analyses confirmed that meso-inclusions harmful in fatigue cannot be rated by standard methods, nor 10 MHz ultrasonic testing (macro) or micro-cleanness assessments. The necessity of rating these meso-inclusions has led to critical evaluation of Extreme Value Analysis according to ASTM E2283-08 and the development of high frequency immersion ultrasonic testing. EVA methodology based on inclusion width can be applied reliably when principal stress is parallel to the rolling direction. On the contrary, if inclusions are testing in the elongated directions its fails. On the other hand, the guidelines and recommendations for high frequency ultrasonic testing have been compiled in a new European standard draft. This method based on focal beam probes and high-resolution devices is able to provide information on meso-inclusion distribution.