Filtern
Dokumenttyp
Schlagworte
- Agricultural food (1)
- Apples (1)
- Ausgleichsfeuchte (1)
- Climatic conditions (1)
- Ethylene (1)
- Indicator (1)
- Molybdenum blue (1)
- Monitoring (1)
- Nachernteverhalten (1)
- Relative humidity (1)
Ripeness and senescence of climacteric fruits are strongly related to the emission of ethylene gas. The ethylene emission of apples can be detected by a new developed ripeness indicator. This indicator is based on the reduction effect of ethylene causing colour changes in selected metal ions. The used molybdenum (Mo) chromophores change under the impact of ethylene in a colour spectrum from white/light yellow to blue because of a partial reduction of Mo(VI) to Mo(V). The sensitivity of molybdenum colour change reactions can be varied by composition and pH values (pH 1.4–pH 1.5) of used ammonium molybdate solution and thus adopted to different fruits and storage conditions. The indicator can be combined with a colour recognition sensor for quantitative measurements of colour change in the frame of the L*a*b* model. The b*-coordinate, reflecting changes from yellow to blue, and the luminance L* continuously vary with increasing ethylene emission. Results obtained with the indicator system were compared with direct determination of ethylene concentrations by gas chromatography (GC-FID). Furthermore, a descriptive sensory test was used to estimate the degree of ripeness. The indicator can be applied for ripeness gauge on single fruit or in paperboard crates.
An online monitoring of environmental and inherent product parameters is required during transportation and storage of fruit and vegetables to avoid quality degradation and spoilage. The control of transpiration losses is suggested as an indicator for fruit freshness by humidity measurements. For that purpose, an electronic sensor is surrounded by a wet porous fiber material which is in contact with the outer atmosphere. Transpiration reduces the water content of the porous material and thus also the internal water activity. The sensor system, known as 'artificial fruit,' measures the relative humidity and temperature inside the wet material. Humidity and temperature data are collected and transmitted on demand by a miniaturized radio communication unit. The decrease in the measured relative humidity has been calibrated against the mass loss of tomatoes under different external influencing parameters such as temperature, humidity, and air flow. Current battery life allows the sensor system, embedded in a fruit crate, to transmit data on transpiration losses via radio transmission for up to two weeks.