Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (50)
- Beitrag zu einem Tagungsband (33)
- Zeitschriftenartikel (29)
- Beitrag zu einem Sammelband (2)
- Forschungsbericht (2)
- Dissertation (1)
- Sonstiges (1)
- Posterpräsentation (1)
Schlagworte
- Dangerous goods packagings (11)
- Gefahrgutverpackungen (10)
- Sift-proofness (6)
- Gefahrgut (5)
- Bubble test (4)
- Dangerous goods (4)
- Dichtheit (4)
- Helium (4)
- Leakproofness (4)
- Überdruck (4)
Organisationseinheit der BAM
Eingeladener Vortrag (wissenschaftliche Konferenzen)
- nein (50)
Die BAM ist nahezu über die gesamte Wertschöpfungskette hinweg wissenschaftlich tätig. Von der sicheren und effizienten Wasserstofferzeugung (POWER-to-GAS), über die (Zwischen-)Speicherung von Wasserstoff in Druckgasspeichern bis hin zum Transport bspw. mittels Trailerfahrzeug zum Endverbraucher.
Komplettiert werden die Aktivitäten der BAM durch die sicherheitstechnische Beurteilung von wasserstoffhaltigen Gasgemischen, die Verträglichkeitsbewertung von Werkstoffen bis hin zur Detektion von Wasserstoffkonzentrationen über geeignete Sensorik, auch mittels ferngesteuerter Messdrohnen (sog. UAV-Drohnen).
Zudem untersucht die BAM proaktiv Schadensrisiken und Unfallszenarien für die Sicherheitsbetrachtung, um mögliche Schwachstellen aufzeigen und potenzielle Gefährdungen erkennen zu können.
The Dangerous Goods Regulations currently do not include limit leakage rates orsensitivity requirements for industrial leak testing procedures that are equivalent tothe bubble test, which is the prescribed test method for design type testing ofdangerous goods packagings. During series production of such packagings, variousmethods are used, which often do not meet the requirements of the bubble test withregard to important criteria.Sensitivity, flow direction, pressure level and automatability are particularly importantfactors when selecting a suitable industrial leak testing method.The following methods are in principle both suitable and equally effective as thebubble test: pressure rise test (vacuum chamber), ultrasonic bubble leak detectionand gas detection methods (pressure technique by accumulation and vacuumchamber technique).To ensure a uniform test level during design type testing and production line leaktesting and therefore a comparable safety level as required by the Dangerous GoodsRegulations, it is necessary to include a more precise specification in these regula-tions. This requires, on the one hand, information about the sensitivity of the bubbletest and, on the other hand, the inclusion of a list of suitable, equally effective indus-trial test methods with their specific boundary conditions.
Gemäß den internationalen Gefahrgutvorschriften müssen Säcke und flexible Großpackmittel (Flexible Intermediate Bulk Container - FIBC) für feste Gefahrgüter staubdicht sein.
In der Praxis der stichpunktartigen Kontrollen von Gefahrguttransporten durch die Autobahnpolizei Münster werden jedoch immer wieder Austritte von pulverförmigen oder körnigen Gefahrgütern aus eigentlich intakten Säcken und FIBC detektiert.
Es wird ein Überblick über die im Jahr 2019 festgestellten Gefahrgutaustritte aus diesen Arten von Gefahrgutverpackungen gegeben. Darauf aufbauend wird eine systematische Einordnung hinsichtlich betroffener Bauarten und eine Diskussion möglicher Lösungsansätze vorgenommen.
A new irradiation device for the exposure of plastic products is presented. Developed in the BAM division 3.1 "Dangerous Goods Packaging" it can be used for artificial UV irradiation of plastic Containers filled with hazardous liquids.
Present regulations and tests only investigate the exposure effects of UV and of media separately, but as the damaging effect is expected to be synergistic for at least some media, a combined test was looked for.
A chamber of 60 cm by 60 cm base area and 1 m height gives space for up to 40 cm wide objects. Two fluorescent UV lamp arrays are arranged on opposite walls, separated from the chamber by quartz glass panes. By continuously rotating the exposure object by means of a rotary disc that the object is placed on, spatial irradiation homogeneity is achieved over the exposure duration. The spectral irradiance of the chosen UVA 340 nm lamps gives the best match of global solar radiation in the short wavelength ränge. The close arrangement of the UVA lamps (15 each side) results in 60 W m'2 UV irradiance.
Constant temperature is adjusted to typically 40 °C by the control of the fan speed. This temperature is chosen, as it is the required temperature for three week storage of filled polyethylene Containers, for proving Chemical compatibility in the field of dangerous goods. To ensure homogeneity, an interiorfan provides for air circulation.
The key point within the scope of this research project was to find out whether there was a risk of creating an explosive atmosphere by permeation of flammable liquid compounds during transport of dangerous goods in freight containers under normal conditions of carriage. Therefore, all aspects that had an influence on the formation of such an atmosphere had to be considered. The most important influencing factors were permeation, air change in the freight container and ambient temperature. The first step was to investigate the permeation with different packaging materials, charge and temperatures. Furthermore, the air change rates of different freight containers were measured. A few climate tests with containers on ships, e.g. to Singapore, were performed to assess normal conditions of carriage. Another important point was measuring the solvent (toluene) concentration in the gas phase in a freight container loaded with plastic intermediate bulk containers (IBCs) filled with toluene. To confirm that the measured values were in the right range, the toluene concentration in the gas phase in a container was calculated with different packaging materials, air change rates and temperatures.
The results of the measurements and calculations have shown that safety layers in the packaging wall, e.g. the copolymer of ethylene and vinyl alcohol (EVOH) and polyamide, can reduce the rate of permeation by more than a decimal power, but the lower explosive limit of toluene is easily reached within a few hours at 40°C charge temperature if there is no barrier.
Ziel einer Dichtheitsprüfung ist es entweder, mit einem quantitativen Prüfverfahren integrale Leckageraten zu messen, oder mittels eines lokalisierenden Verfahrens den genauen Leckageort aufzuspüren.
In einigen Fällen kann das Betriebsmedium gleichzeitig das Prüfmedium sein, wenn geeignete Sensorik zu Verfügung steht. In anderen Fällen kann dies aus unterschiedlichen Gründen nicht möglich sein. Daher ersetzt man bei der Verwendung von Prüfgasverfahren das Betriebsmedium durch ein spezifisch nachweisbares Prüfgas.
Für die Interpretation eines quantitativen Messergebnisses ist es notwendig, die Ist-Leckagerate mit einer zuvor berechneten Grenzleckagerate (maximal zulässige Leckagerate) zu vergleichen. Entspricht das für die Dichtheitsprüfung verwendete Prüfgas nicht dem Betriebsmedium, so ist hierfür eine Umrechnung von Leckageraten notwendig.
Es wird ein Überblick über für die Dichtheitsprüfung gängige Prüfgase, deren Eigenschaften sowie Vor- und Nachteile gegeben. Die grundlegenden Prinzipien bei der Umrechnung von Leckageraten (Druckumrechnung; Temperaturumrechnung; Umrechnung der Gasart bzw. des Mediums) werden vorgestellt.
Abstract: The leaks of dangerous goods from actually intact bags detected in the years 2018 to 2020 tend to be at an almost constant high level. These releases of powdery or granular dangerous goods represent violations of the sift-proofness required in the dangerous goods regulations. This article first analyzes the causes. The components of the bags that are affected by leaks are micro-perforations, joins and closures, in particular internal sleeve valves.
A distinction must be made between bags closed in conformity with or contrary to the manufacturer's instructions.
The particle release is determined by a number of influencing factors of the filling substance, the packaging and other boundary conditions. Therefore, a comprehensive test concept is developed in this work, which takes all these factors into account. The application of this test concept facilitates the planning of the test setup and the experiments. On this basis, the complex mechanisms involved in the release of solid substances can be systematically investigated in the test laboratory. To prevent releases of powdery or granular substances from intact bags, it is necessary that the user has access to the closing instructions and the relevant properties of the test substance used for the design type approval. Further experimental investigations are needed to assess whether filling substances change their properties during transport and whether this enables them to escape.
The leaks of dangerous goods from actually intact bags detected in the years 2018 to 2020 tend to be at an almost constant high level. These releases of powdery or granular dangerous goods represent violations of the sift-proofness required in the dangerous goods regulations. This article first analyzes the causes.
The components of the bags that are affected by leaks are micro-perforations, joins and closures, in particular internal sleeve valves. A distinction must be made between bags closed in conformity with or contrary to the manufacturer's instructions. The particle release is determined by a number of influencing factors of the filling substance, the packaging and other boundary conditions.
Therefore, a comprehensive test concept is developed in this work, which takes all these factors into account. The application of this test concept facilitates the planning of the test setup and the experiments. On this basis, the complex mechanisms involved in the release of solid substances can be systematically investigated in the test laboratory.
To prevent releases of powdery or granular substances from intact bags, it is necessary that the user has access to the closing instructions and the relevant properties of the test substance used for the design type approval. Further experimental investigations are needed to assess whether filling substances change their properties during transport and whether this enables them to escape.
To ensure safety when transporting dangerous goods, it is important to specify the flow properties of the respective solid filling substance of the packagings. For this purpose, the angle of repose is currently used for the UN approvals in Germany. Measurements were carried out on 12 powdery or granular substances applying the angle of repose measuring methods customary in the test centres. The results of the methods differ significantly from each other. In addition, some of the techniques cannot be applied for very cohesive or coarse-grained materials. The results for the angle of repose show a strong scatter for some constellations (coefficient of variation more than 20 %). Safety during transport of dangerous goods cannot be guaranteed with this currently practiced system of measuring the angle of repose. As a consequence, an alternative parameter to characterize the flow properties of bulk materials should be used in the recognized test centers for dangerous goods packagings, such as the Hausner ratio. This approach leads to more precise test results for the substances examined (maximum coefficient of variation 2.8 %). It also has advantages in terms of applicability and occupational safety.
Since the flow properties are safety-relevant, both in terms of mechanical safety and safety against the release of dangerous substances, the testing practice in the recognized test labs should be improved and standardized.
The flow properties of powdery or granular filling substances for dangerous goods packagings are safety-relevant parameters. To specify the flow behavior, the angle of repose is measured in the recognized test centers for dangerous goods packagings in Germany. Previous investigations performed on non-hazardous substances revealed that some of the methods currently used have disadvantages in application. Additionally, for occupational health and safety reasons, it was generally viewed critically to carry out measurements of the angle of repose for dangerous goods at all. Instead, the dimensionless Hausner ratio to describe the flow behavior was proposed.
In this work, the investigations were extended to real hazardous substances to concretize the assessment. Five exemplary hazardous substances were tested for their angle of repose using the methods commonly applied in the test centers. The Hausner ratio was also determined. In addition, the influence of a different climatic preconditioning on the angle of repose measurement was examined using three selected non-hazardous bulk materials.
The results show that the measurement of the angle of repose is not fundamentally excluded for dangerous goods. However, for reasons of applicability, repeatability and occupational health and safety, only the ISO method can be applied for dangerous filling substances. This method provides conservative results regarding a safety-related evaluation of flow properties for the transport of dangerous goods.
In principle, both the ISO method and the determination of the Hausner ratio can be used for dangerous goods. It is also essential especially with finely powdered filling goods, to carry out controlled preconditioning.