Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Sammelband (9)
- Zeitschriftenartikel (5)
- Vortrag (5)
- Beitrag zu einem Tagungsband (4)
- Buchkapitel (3)
- Forschungsbericht (3)
- Posterpräsentation (1)
Schlagworte
- Groundwater remediation (4)
- Hydroxyapatite (4)
- Elemental Iron (3)
- Groundwater (3)
- Long-term Performance (3)
- Permeable Reactive Barrier (3)
- Permeable reactive barriers (3)
- Uranium (3)
- Reaktive Wände (2)
- Ageing (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (5)
Tailings are the fine residue of the milling process in the mining industry and appear in slurry form being mixed with water during this process. Large tailings ponds are required to contain them, usually confined by man-made dams. Such tailings facilities pose considerable risk both to the environment and human lives.
A major interdisciplinary research project ('TAILSAFE') supported by European Union has been initiated with the aim to increase attention towards and reduce the risk posed by tailings facilities. Methods of parameter evaluation and measurement are being developed within the project and applied for the detection, assessment and improvement of the safety state of tailings dams and ponds.
One of the workpackages has his focus on non-destructive geophysical investigation methods. Geoelectrical (SIP), seismic and radar methods will be used to get information on the tailings dam structure and water content.
Improperly built or managed tailing dams pose major risks to human lives and the environment. Research for risk reduction by new technologies including slurry handlings, stochastic modelling, development of a parameter framework as well as work on legislation and authorisation procedures will be done in the EC-funded project TAILSAFE. Focus of this paper is on geophysial techniques for structure investigation and monitoring.
Unsafe tailings management facilities (TMFs) have caused serious accidents in Europe (e.g., Baia Mare, Romania, in 2000, Aznalcóllar, Spain, in 1998, and Stava, Italy, in 1985), threatening human health/life and the environment. While advanced design, construction and management procedures are available, their implementation requires greater emphasis. An integrated research project funded by the European Union was carried out between 2002 and 2005 with the overall goal of improving the safety of TMFs (Sustainable Improvement in Safety of Tailings Facilities-TAILSAFE, http://www.tailsafe.com/). The objective of TAILSAFE was to develop and apply methods of parameter evaluation and measurement for the assessment and improvement of the safety state of tailings facilities, with particular attention to the stability of tailings dams and slurries, the special risks inherent when such materials include toxic or hazardous wastes, and authorization and management procedures for tailings facilities. Aspects of tailings facilities design, water management and slurry transport, non-destructive and minimally intrusive testing methods, monitoring and the application of sensors, intervention and remediation options were considered in TAILSAFE. A risk reduction framework (the TAILSAFE Parameter Framework) was established to contribute to the avoidance of catastrophic accidents and hazards from tailings facilities. Tailings from the mining and primary processing of metals, minerals and coal were included within the scope of TAILSAFE. The project focused on the avoidance of hazards by developing procedures and methods for investigating and improving the stability of tailings dams and tailings bodies.
Effective cleanup of groundwater contaminated with radionuclides using permeable reactive barriers
(2015)
The mining of natural resources always causes environmental impacts such as land use, large quantities of waste, destruction of habitat, impairment of groundwater regime, and quite possibly contamination of soil, water, or air (Dudka and Adriano 1997). The environmental impact of mining cannot be estimated easily. The concept of total material requirement (TMR) is an attempt to quantify the environmental impact of materials. TMR is the sum of domestic and imported primary natural resources and their hidden flows (Adriaanse et al. 1997). Hidden flows are often not considered in environmental analyses because they are attributed with no cost. However, overburden from mining, earth moving for construction, and soil erosion are major sources of ecological damage. From the mining of minerals to the final products, a number of process steps take place (exploration, mine site development, extraction, milling, washing, concentration, smelting, refining, fabrication), each step being connected to other input flows such as energy or other resources. The hidden flows for metals related to metal ore mining have been investigated by Halada et al. (2001). Table 9.1 lists the data for some metals, together with the data for some other minerals and fuels. The TMR in the United States in the 1990s was between 80 and 100 tonnes per capita; in the European Union (EU-15) approximately 50 tonnes per capita (Bringezu 2002).