Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (8)
- Zeitschriftenartikel (6)
- Buchkapitel (4)
- Vortrag (3)
Schlagworte
- Dynamic load test (3)
- Offshore pile foundation (3)
- Static load test (3)
- Bohrpfähle (2)
- Cyclic loading (2)
- Dynamische Pfahlprobebelastung (2)
- Offshore wind turbines (2)
- Pfahlgründungen (2)
- Ringversuch (2)
- Statische Pfahlprobebelastung (2)
Eingeladener Vortrag
- nein (3)
Offshore-Windenergie betritt Neuland, gerade bei der Gründung. Denn Windenergie auf See kann die Erfahrungen der gängigen Offshore-Konstruktionen der Öl- und Gasindustrie nur bedingt nutzen. Mehr als dort, versucht man bei der Offshore-Windenergie, die Gründungsabmessungen – insbesondere die Pfahllängen – soweit wie möglich zu reduzieren. Denn dies kann bei der hohen Anzahl der Windenergieanlagen erhebliche wirtschaftliche Vorteile bringen. Andererseits wird die Standsicherheit der Gründungen durch den viel höheren Anteil an zyklischen Lasten gegenüber den gängigen Offshore- Strukturen in schwer einschätzbarer Weise zusätzlich gefährdet. Da Offshore-Windenergieanlagen in Serienfertigung produziert werden, wirkt sich hier jeder systematische Fehler bei der Gründung dann gleich als Serienfehler auf eine Vielzahl von Anlagen aus. Überwachung ist also angesagt – und das richtige Maß bei der Pfahlgründung, der am meisten verwendete Fundamenttyp bei Windenergieanlagen.
Die Berechnung von Verformungen lateral belasteter Pfahlgründungen bedingt in der Regel die Überführung
der transienten Belastungen aus verschiedenen Umwelteinwirkungen in eine meist sinusförmige
zyklische Belastung mit konstanter Amplitude. Dies bringt die Vernachlässigung der Reihenfolge,
in der die realen Belastungen auftreten, mit sich. Die Voraussetzung dafür ist, dass der Einfluss dieser
Reihenfolge auch tatsächlich gering ist. Da die meisten experimentellen Untersuchung hierzu sich auf
die Elementebene und relativ geringe Zyklenzahlen beschränken, wird hier eine Versuchsserie präsentiert,
in welcher Modellpfähle durch Zyklenpakete mit unterschiedlichen Amplituden in variierender
Reihenfolge und hohen Lastspielzahlen belastet werden. Es zeigt sich ein geringer bis vernachlässigbarer
Einfluss der Reihenfolge der Lastblöcke für reine Schwellbelastungen.
Offshore wind turbines enter unknown territory, especially where the foundations are concerned. This is because offshore wind power can only make use of the experience from the common offshore constructions used by the oil and gas industry to a limited extent. The offshore wind industry has tried to reduce foundation dimensions, especially the pile lengths, as much as possible compared with those of the oil and gas industry. This is because with the large number of wind turbines involved it can provide considerable economic advantages. On the other hand, the stability of the foundations is additionally at risk because due to the much larger number of cyclic loads they are subjected to it is very difficult to predict how they will behave. Since offshore wind farms are manufactured in series, every systematic fault in the foundation acts as a series fault for a large number of turbines. This calls for monitoring – and the right dimensions of pile foundation, the most common type of foundations used for wind turbines
Static and dynamic pile tests are carried out to determine the load bearing capacity and the quality of reinforced concrete piles. As part of a round robin test to evaluate dynamic load tests, structure integrated fibre optic strain sensors were used to receive more detailed information about the strains along the pile length compared to conventional measurements at the pile head. This paper shows the instrumentation of the pile with extrinsic Fabry-Perot interferometers sensors and fibre Bragg gratings sensors together with the results of the conducted static load test as well as the dynamic load Tests and pile integrity tests.
Schieflagen bitte vermeiden
(2016)
Vieles ist möglich, auch auf dem Meeresboden. Wind und Wellen rütteln gemeinsam an der Gründung, den Fundamenten der Offshore-Windenergieanlagen. Hinzu kommen die „ganz normale“ Strömung sowie die in der Nordsee besonders ausgeprägten Gezeiten von Ebbe und Flut. Zudem kann am Meeresboden Porenwasserüberdruck entstehen, der den Boden lockern und im schlimmsten Fall bei Monopiles die Stabilität der gesamten Anlage ändern kann. Selbst wenn ein solcher in den Meeresboden gerammter Pfahl bis zu 8 Meter Durchmesser hat. Über die Hälfte der geplanten Offshore-Anlagen in Nord- und Ostsee werden mit Ein-Pfahl-Gründungen geplant, über 40 % sollen als Mehrpfahl-Gründungen, zum Beispiel als Tripod, ausgeführt werden. Von daher verdienen Pfahlgründungen und ihre Belastungen besondere Aufmerksamkeit. Denn eines gilt es im Anlagenbetrieb unbedingt zu vermeiden: Eine drohende Schiefstellung der Anlage
Porenwasserdruckaufbau und Bodenentfestigung um Pfahlgründungen von Offshore-Windenergieanlagen
(2012)
Die Gründung von Offshore-Windenergieanlagen erfordert oft die Installation von Stahl-Pfählen mit großem Durchmesser, entweder als Monopile- oder Mehrpfahl-Konfiguration (Jacket, Tripod, usw.). In dieser Veröffentlichung werden die Auswirkungen einer zyklischen lateralen Belastung auf Offshore-Pfahlgründungen untersucht. Hierbei wird besonderes Augenmerk auf die Entwicklung des Porenwasserdrucks im umgebenden gesättigten Boden gelegt. Es wird gezeigt, dass der progressive Aufbau von Porenwasserdruck zu erheblichen Veränderungen des Verhaltens der Gründung unter externer Belastung führen kann, die die Stabilität bzw. Gebrauchstauglichkeit der Anlage potenziell gefährden. Dazu werden auch einige Effekte, die während eines realistischen Sturms von moderater Stärke entstehen, untersucht. Die transiente Abminderung der Gründungssteifigkeit wird hierbei thematisiert. Die genannten Aspekte wurden von den Autoren mittels eines gekoppelten zweiphasigen numerischen Modells der Offshore-Gründung untersucht. Das verwendete Stoffgesetz für den Boden, im Rahmen der Theorie der verallgemeinerten Plastizität, kann wichtige Merkmale von zyklischem Bodenverhalten reproduzieren, wie z. B. die Tendenz zu einer fortschreitenden Verdichtung unter zyklischer Belastung, die für Verflüssigungsphänomene unter undränierten Bedingungen verantwortlich ist. Die Notwendigkeit der Verwendung eines solchen Ansatzes wird hier anhand von Vergleichsberechnungen mit einem einfacheren Stoffmodell bzw. mit einem ungekoppelten Modell erörtet. Abschließend werden einige Implikationen der untersuchten Fragenstellungen für die praktische Bemessung von Offshore-Monopiles diskutiert und spezifische Empfehlungen gegeben.---------------------------------------------------------------------------------------------------------------------------
For the installation of wind turbines in the offshore environment and their foundation in the seabed it is customary to employ large-diameter steel piles, either in monopile or multi-pile configurations (jacket, tripod, etc. ...). The effects of cyclic lateral loading on the offshore piles and particularly the possibility of a progressive accumulation of residual pore water pressure within the saturated embedding soil are discussed in this article. Here it is shown that this can lead to significant changes of their behaviour under external loading, which can potentially compromise the foundation's stability or serviceability. Furthermore, some of the singular effects arising during a realistic storm of moderate magnitude as well as their potential for transient damages to the foundation's stiffness are addressed in the paper. For the investigation of these phenomena the authors have employed a coupled bi-phasic analytical model of the offshore foundation. The constitutive model employed for the seabed, in the frame of the theory of Generalized Plasticity, can reproduce some complex features of cyclic soil behaviour such as the tendency for a progressive densification under cyclic loading, which is responsible for the soil liquefaction phenomena in undrained conditions. Finally, some implications and specific recommendations for the design of offshore monopiles in the frame of the limit states are provided.
A great deal is possible, even on the seabed. Together, wind and waves shake the foundations of the offshore wind turbines. "ere is also the “normal” current and ebb and #ow of the tides that are so distinctive in the North Sea. Pore water pressure can also occur on the seabed, loosening it. Where monopiles are involved, the worst case is that the stability of the whole turbine can be altered – even if such a monopile rammed into the seabed has a diameter of up to eight metres. Over half the planned offshore wind turbines in the North and Baltic Seas are to have monopile foundations, and over 40 % are to have multi-pile foundations, designed for example as a tripod. "is is why pile foundations and their loads deserve special attention. For one thing above all is to be avoided in plant operations, and that is the risk of turbine tilt.
The saturated sand surrounding an offshore pile
foundation under quasi-static cyclic lateral load can show the
physical phenomena of macromechanical densification and
convective granular flow. Based on the results from physical
model tests at different geometrical scales, this paper
provides a certain quantification of such phenomena and discusses
their causes and consequences. The progressive sand
densification leads to subsidence of the soil surface and a significant
stiffening of the pile behaviour. Conversely, the ratcheting
convective motion of two closed cells of soil beneath
the pile-head is responsible for an endless grain migration at
the soil surface, the inverse grading of the convected material
and a direct shear of the sand at the distinct boundary of the
revolving soil domain. In this respect, and from a macromechanical
perspective considering the soil as a continuum, it
appears that the convecting material tends to follow gradient
lines of shear stress during its ratcheting motion. Concluding
the paper, the practical relevance of these phenomena and
their extrapolation to other conditions are briefly discussed.