Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (37)
- Zeitschriftenartikel (8)
- Vortrag (2)
Schlagworte
- Transport (7)
- Numerische Analyse (6)
- Radioaktive Stoffe (6)
- Mechanische Bewertung (5)
- Ageing (4)
- Mechanik (4)
- Radioactive material (4)
- Radioaktives Material (4)
- Spent nuclear fuel (4)
- Drop test (3)
- Drop tests (3)
- Dual purpose cask (3)
- Dual purpose casks (3)
- Gefahrgut (3)
- Großkomponenten (3)
- Kerntechnische Anlagen (3)
- Rückbau (3)
- Safety assessment (3)
- Aging (2)
- Aging mechanisms (2)
- Assessment (2)
- Bauartprüfung (2)
- Beförderung (2)
- Corrosion (2)
- Fallprüfungen (2)
- Interim storage (2)
- Metal seals (2)
- Package (2)
- Transport package (2)
- Transport packages (2)
- Transportbehälter (2)
- Zulassung (2)
- Ageing mechanisms (1)
- Alterung (1)
- Anerkennung (1)
- Antragsverfahren (1)
- Approved packages (1)
- Assessment method (1)
- Basket design (1)
- Bruchmechanik (1)
- Cesium corrosion (1)
- Closure system (1)
- Containment (1)
- Decommissioning (1)
- Design approval (1)
- Design assessment (1)
- Design assessment of RAM packages (1)
- Drop testing (1)
- Dual Purpose Casks (1)
- Ductile cast iron (1)
- Encapsulations for damaged spent nuclear fuel (1)
- Entsorgung (1)
- Experimental testing (1)
- FEM (1)
- Finite Element Analysis (1)
- Fracture initiation (1)
- Gap analysis (1)
- Gefahrgutregeln der BAM (1)
- Guide (1)
- High-level waste (1)
- IP-2 (1)
- IP-3 (1)
- Internal shock absorber (1)
- Kerntechnik (1)
- Large components (1)
- Large objects (1)
- Management (1)
- Management system (1)
- Material (1)
- Mechanical assessment (1)
- Mechanical tests (1)
- Mechanism (1)
- Metal seals reliability (1)
- New package design (1)
- Normen (1)
- Nuclear power plant (1)
- Numerical analysis (1)
- Numerical calculations (1)
- Numerical modelling (1)
- Package assessment (1)
- Package design (1)
- Package testing (1)
- Packaging (1)
- Periodical Review (1)
- Periodical review (1)
- Quality Management (1)
- Quality assurance (1)
- Quality management system (1)
- Radioactive materials (1)
- Radioaktiv (1)
- Radioaktive Materialien (1)
- Regeln (1)
- Rückbau kerntechnischer Anlagen (1)
- SCO-III (1)
- SNF (1)
- SSR-6 (1)
- Safety (1)
- Safety Analysis (1)
- Sealed sources (1)
- Special encapsulation (1)
- Special form radioactive material (1)
- Spent fuel (1)
- Spent fuel assemblies (1)
- Spent fuel/high-level waste (1)
- Storage (1)
- Strahlenschutz (1)
- Structural analysis (1)
- Thermal Design (1)
- Thermal tests (1)
- Thermik (1)
- Transport Packages (1)
- Transport and storage casks (1)
- Transport and storage casks for spent nuclear fuel or high level waste (1)
- Transport conditions (1)
- Transport of radaioactive materials (1)
- Transportability (1)
- Transportation (1)
- Transportation of radioactive materials (1)
- Ttransport (1)
- Typ A (1)
- Typ B(U)-Verpackung (1)
- Typ-B Versandstück (1)
- Zulassungen (1)
- Zwischenlagerung (1)
- radioaktives Material (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (2)
Transport of large nuclear power plant components: experiences in mechanical design assessment
(2009)
In the course of decommissioning of power plants in Germany large nuclear components (steam generator, reactor pressure vessel) must be transported over public traffic routes to interim storage facilities, where they are dismantled or stored temporarily. Since it concerns surface contaminated objects or low specific activity materials, a safety evaluation considering the IAEA transport regulations mainly for industrial packages (type IP-2) is necessary. For these types of industrial packages the requirements from normal transport conditions are to be covered for the mechanical proof. For example, a free drop of the package from a defined height, in dependence of its mass, onto an unyielding target, and a stacking test are required. Since physical drop tests are impossible generally due to the singularity of such 'packages', a calculation has to be performed, preferably by a complex numerical analysis. The assessment of the loads takes place on the basis of local stress distributions, also with consideration of radiation induced brittleness of the material and with consideration of recent scientific investigation results. Large nuclear components have typically been transported in an unpackaged manner, so that the external shell of the component provides the packaging wall. The investigation must consider the entire component including all penetration areas such as manholes or nozzles. According to the present IAEA regulations the drop position is to be examined, which causes the maximum damage to the package. In the case of a transport under special arrangement a drop only in an attitude representing the usual handling position (administratively controlled) is necessary. If dose rate values of the package are higher than maximum allowable values for a public transport, then it is necessary that additional shielding construction units are attached to the large component.
Transport of large nuclear power plant components - experiences in mechanical design assessment
(2009)
Packages for the transport of radioactive material are generally equipped with specific
structures (basket) to support the radioactive content in defined position. The safety function
of the basket depends on the kind of transported inventory. In case of transport cask for spent
fuel, the basket design has to ensure the subcriticality of the fissile material in all conditions
of transport in particular. Therefore the evaluation of structural integrity and neutron
absorption capability of the basket is an important part of complete safety analysis. Sufficient
heat transfer to maintain fuel assembly and cask temperature within allowable limits has to be
verified as well. Corrosion resistance is an additional requirement on basket materials owing
to contact with water during loading and unloading operations.
Computational and experimental methods or their combination along with additional material
and component tests can be used to analyse the mechanical and thermal basket behaviour
under transport conditions defined in IAEA regulations. By deciding between the analysis
methods, the design features (including material selection concept) as well as specific safety
function should be accounted.
In approval procedures of transport packages for radioactive materials, the competent
authority mechanical and thermal safety assessment is carried out in Germany by BAM. Some
questions of safety evaluation of basket designs are discussed in this paper based on the BAM
experience within approval procedures. The paper focuses primarily on the mechanical
behaviour of baskets with regard to the assumptions that have to be used in the criticality
safety demonstration. The state of the art methodologies for computational basket stress and
deformation analysis as well as for interpretation of drop tests results are presented.
Transport of large nuclear power plant components - experiences in mechanical design assessment
(2010)
In the approval procedure of transport packages for radioactive materials, the mechanical and thermal safety assessment is carried out in Germany by competent authority BAM. In recent years BAM was involved in several licensing procedures of new spent fuel and HLW package designs, where the cask body was made of Ductile Cast Iron (DCI). According to IAEA regulations package designs have to fulfill requirements for specific conditions of transport. Type B(U) packages must withstand the defined accident conditions of transport. The temperature range from -40°C up to the operational temperature has to be considered. For the cask material DCI, it is necessary to determine the brittle fracture behavior. The German guideline BAM-GGR 007 defines requirements for the fracture mechanics of DCI. Due to complex structure of the cask body and the dynamic loading a fracture mechanical assessment in an analytical kind is not always possible. Experience of recent design approval procedures show that the application of numerical calculations are applicable to determine the fracture mechanical load in the cask body. At the first step a numerical analysis has to be done to identify the loading state at the whole cask body. Secondly an analysis of a detail of the cask body is made considering the displacement boundary conditions of the global model. An artificial flaw is considered in this detailed model to calculate the fracture mechanical loading state. The finite element mesh was strongly refined in the area of flaw. The size of the artificial flaw is characterized by the ultrasonic inspection used for the quality assurance of the package. The applicant developed additional analysis tools for calculation of stress intensity factor and/or J-Integral. The assessment approach by BAM led to the decision to develop own tools to the possibility for independent check of the results.
The paper describes the authority assessment approach for the DCI fracture mechanics analysis. The validation procedure incl. the development of own tools is explained. BAM developed a post-processor called JINFEM to determine the fracture mechanical loads. The regulatory 1 m puncture bar drop test is used to give an example of the assessment procedure.
This paper demonstrates exemplarily how numerical and experimental approaches can be combined reasonably in mechanical assessment of package integrity according to the IAEA regulations. The paper also concentrates on the question about how static mechanical approaches can be applied, and what their problems are in relation to dynamic calculation approaches. Under defined impact tests, which represent accident transport conditions, the package has to withstand impact loading, e.g. resulting from a 9 m free drop onto an unyielding target in sequence with a 1 m puncture drop test. Owing to the local character of the interaction between the puncture bar and the cask body, it is possible to develop a dynamic numerical model for the 1 m puncture drop which allows an appropriate simulation of the interaction area. Results from existing experimental drop tests with prototype or small scale cask models can be used for verification and validation of applied analysis codes and models. The link between analysis and experimental drop testing is described exemplarily by considering a regulatory 1 m puncture bar drop test onto the cask body of a recently approved German high level waste transport package. For the 9 m drop test of the package, it is difficult to develop a dynamic numerical model of the package due to the complexity of the interaction between cask body, impact limiters and unyielding target. Dynamic calculations require an extensive verification with experimental results. The simulation of a 9 m drop of a package with impact limiters is thereby often more complex than the simulation of a 1 m puncture drop onto the cask body. A different approximation method can be applied for the consideration of dynamic effects on the impact loading of the package. In a first step, maximum impact force and rigid body deceleration of the cask body during the impact process can be calculated with simplified numerical tools. This rigid body deceleration can subsequently be applied on a verified static numerical model. Dynamic effects, which cannot be covered by the static numerical analysis, have therefore to be considered by using an additional dynamic factor. The paper describes this approach exemplarily for a 9 m horizontal drop of a typical spent fuel cask design.
In the design approval of transport packages for radioactive materials, the mechanical and thermal safety assessment is carried out in Germany by competent authority BAM. In recent years BAM was involved in several licensing procedures of new spent fuel and HLW package designs, where the cask body is of Ductile Cast Iron (DCI). According to IAEA regulations package designs have to fulfill requirements for specific conditions of transport. Type B(U) packages must withstand the defined accident conditions of transport. The temperature range from -40°C up to the operational temperature has to be considered. For the cask material DCI, it is necessary to determine safety against brittle fracture. The German guideline BAM-GGR 007 defines requirements for fracture mechanics of packagings made of DCI. Due to complex cask body structure and the dynamic loading a fracture mechanical assessment by analytical approaches is not always possible. Experience of recent design approval procedures show that the application of numerical calculations are applicable to determine the stresses and stress intensity factors in the cask body. At the first step a numerical analysis has to be done to identify
the loading state at the whole cask body. Secondly an analysis of a detail of the cask body is made considering the displacement boundary conditions of the global model. An artificial flaw is considered in this detailed model to calculate the fracture mechanical loading state. The finite element mesh was strongly refined in the area of the flaw. The size of the artificial flaw is based on the ultrasonic inspection acceptance criteria applied for cask body manufacture. The
applicant (GNS) developed additional analysis tools for calculation of stress intensity factor and/or J-Integral. The assessment approach by BAM led to the decision to develop own tools to the possibility for independent proof of the results.
The paper describes the authority assessment approach for DCI fracture mechanics analysis. The validation procedure incl. the development of own tools is explained. BAM developed a postprocessor to determine the fracture mechanical loads. A horizontal 1 m puncture bar drop test is used to give a detailed description of the assessment procedure.
Load attachment points, consisting of the lifting component and corresponding bolt connections, and lid systems, consisting of a lid, gaskets and bolt connections, are usually analyzed numerically using the Finite Element Method. Reasons for applying the FEM are complex geometry, specific load distribution and the violation of application criteria for analytical approaches. For example the elementary beam theory is not suitable for the calculation of compact trunnions and the Kirchhoff plate theory is not suitable for the calculation of lids with a large thickness to diameter ratio because the Bernoulli-hypothesis is violated. In addition for structural integrity assessments often local stress and for the evaluation of lid systems tightness local contact opening are needed, which can be obtained only through accurately discretized numerical models.
Independent comparative calculations are essential for complex calculations. Simplified but appropriate analytical approaches are an efficient way of examination. Is it possible to provide conservative analytical estimates of such kind of analysis problems? Are analytical calculations an appropriate approach in today's authority assessment business? Using the example of bolted trunnion and lid systems of a heavy package the possibilities and limits of analytical comparative calculations are shown.
Dicht und sicher abgeschirmt
(2014)
In Germany current package design safety cases include more and more advanced numerical methods, e. g. finite element analysis (FEA), often in combination with local concepts of strength evaluation of the structure. This approach requires extensive modeling and verification procedures. As a consequence the efforts of authority assessment of design safety analysis increase as well. Only the check of pre- and post-data of numerical calculations is often not sufficient for the safety assessment. On the other hand own analyses of the mechanical problem by performing an Independent numerical modeling and analyzing is not always realizable. Therefore it is necessary to look for optimized procedures of the assessment, without loss of safety. This paper shows possibilities for the assessment strategy of numerical analyses with focus on simple analytical approaches as comparative calculations. Such approaches can be helpful to support evaluation of numerical calculations in the whole assessment procedure.
Three examples are considered to Show which possibilities and limits exist to support the assessment of numerical analyses using analytical comparative calculations. Two examples of bolt and lid analysis show the influence of component and boundary stiffness on the results. Thickness to length/width ratios are partially exceeded and only fixed or free boundary conditions can be analyzed analytical. Nevertheless These analytical approaches can help to evaluate the numerical results for the assessment.
The example of a trunnion demonstrates the limits of analytical approaches. The trunnion shows a complex deformation behavior and local stresses. A single basic theory isn’t matching and a construct of several approaches is not useable for calculations of local stresses. Therefore numerical calculations during assessment are necessary.
Analytical approaches are not always purposeful but often effective to reduce the effort of assessment for numerical analysis of complex and safety relevant components of RAM packages.
When storage of spent nuclear fuel or high level waste is carried out in dual purpose casks (DPC), the effects of aging on safety relevant DPC functions and properties have to be managed in a way that a safe transport after the storage period of several decades is capable and can be justified and certified permanently throughout that period. The effects of aging mechanisms (e.g. radiation, different corrosion mechanisms, stress relaxation, creep, structural changes and degradation) on the transport package design safety assessment features have to be evaluated. Consideration of these issues in the DPC transport safety case will be addressed. Special attention is given to all cask components that cannot be directly inspected or changed without opening the cask cavity, like the inner parts of the closure system and the cask internals, like baskets or spent fuel assemblies. The design criteria of that transport safety case have to consider the operational impacts during storage. Aging is not the subject of technical aspects only but also of intellectual aspects, like changing standards, scientific/technical knowledge development and personal as well as institutional alterations. Those aspects are to be considered in the management system of license holders and in appropriate design approval update processes. The paper addresses issues that are subject of an actual International Atomic Energy Agency TECDOC draft 'Preparation of a safety case for a dual purpose cask containing spent nuclear fuel'.
When storage of spent nuclear fuel (SNF) or high-level waste (HLW) is done in dual purpose casks (DPC), the effects of aging on safety relevant DPC functions and properties have to be managed in a way that a safe transport after the storage period of several decades is capable, and can be justified and certified permanently throughout that period. The effects of aging mechanisms (like e.g. radiation, different corrosion mechanisms, stress relaxation, creep, structural changes and degradation) on the transport package design safety assessment features have to be evaluated. The consideration of these issues in the DPC transport safety case will be addressed. Special attention is given to all cask components which cannot be directly inspected or changed without opening the cask cavity, what are the inner parts of the closure system and the cask internals, like baskets or spent fuel assemblies. The design criteria of that transport safety case have to consider the operational impacts during storage. Aging is not subject of technical aspects only, but also of 'intellectual' aspects, like changing standards, scientific/ technical knowledge development and personal as well as institutional alterations. Those aspects are to be considered in the management system of the license holders and in appropriate design approval update processes. The paper addresses issues which are subject of an actual IAEA TECDOC draft 'Preparation of a safety case for a dual purpose cask containing spent nuclear fuel'.