Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (27) (entfernen)
Schlagworte
- Laser cleaning (5)
- Femtosecond laser (4)
- Friction (3)
- Femtosecond laser ablation (2)
- Laser (2)
- Laser-induced periodic surface structures (LIPSS) (2)
- Paper (2)
- Spectroscopy (2)
- Wear (2)
- Ablation (1)
- Ancient manuscripts (1)
- Archaeometry (1)
- Biomaterials (1)
- Bor (1)
- CCMat (1)
- Carbon dioxide reduction (1)
- Central Asia (1)
- Ceramics and Composites (1)
- Chemically Complex Materials (1)
- Coatings and Films (1)
- Colorimetry (1)
- DDT (1)
- Decontamination (1)
- Defect model (1)
- Dünnfilm, diamantartig (1)
- Dünnfilmtechnologie (1)
- Electrocatalysis (1)
- Femtosecond laser processing (1)
- Fused silica (1)
- Galvanisierung, elektrisch (1)
- Gold (1)
- Image enhancement (1)
- Image restoration (1)
- Impulslaser (1)
- Laser impact on surfaces (1)
- Laser-induced X-ray emission (1)
- Laser-induced damage threshold (1)
- Laser-induced periodic surface structures, LIPSS (1)
- Manuscript studies (1)
- Metals (1)
- Metals and Alloys (1)
- Microscopy (1)
- Multi-principal element alloys (1)
- Multispectral imaging (1)
- Nanodraht (1)
- Nanosecond laser (1)
- Nanostructures (1)
- Non-destructive testing (1)
- Optical fiber (1)
- Oxidation (1)
- Papery (1)
- Parchment (1)
- Pigments (1)
- Pulsed laser ablation (1)
- Pulslaser (1)
- Radiation protection (1)
- Silk Road (1)
- Spot size (1)
- Surface functionalization (1)
- Surfaces (1)
- Titanium (1)
- Titanium nitride films (1)
- Tribology (1)
- Ultrashort laser material interaction (1)
- Verbundwerkstoff (1)
- Wall paintings (1)
- Wood (1)
Organisationseinheit der BAM
- 6 Materialchemie (4)
- 6.2 Material- und Oberflächentechnologien (3)
- 5 Werkstofftechnik (1)
- 5.1 Mikrostruktur Design und Degradation (1)
- 6.0 Abteilungsleitung und andere (1)
- 6.3 Strukturanalytik (1)
- 6.5 Synthese und Streuverfahren nanostrukturierter Materialien (1)
- 6.6 Physik und chemische Analytik der Polymere (1)
- 6.7 Materialsynthese und Design (1)
- 9 Komponentensicherheit (1)
Template Electrodeposition of Nanowire Arrays on Gold Foils Fabricated by Pulsed-Laser Deposition
(1995)
A detailed diagnostic study of the interaction of nanosecond laser pulses from the near-ultraviolet to the near-infrared wavelength range with various types of contemporary and ancient parchments is presented. The advantages of laser cleaning due to the absence of chemical agents, spectroscopic selectivity, micro-precision and computer-aided handling can only be verified when physico-chemical diagnostics guarantee destructionless processing. Scanning electron microscopy data are correlated with chemical degradation and morphological changes dependent on the laser fluence and wavelength. It is also shown how transmission electron microscopy, diffuse reflectance infrared Fourier transform spectroscopy, and pyrolysis capillary gas chromatography can be employed in the chemical diagnostics of laser cleaning of parchment. This study suggests that the ageing status of parchment artefacts plays a major role in assessing the laser cleaning limits.
The applicability of excimer laser at 308 nm and Nd:YAG laser at 532 nm with fluences below 0.86 J/cm2 for cleaning of cellulose and paper materials was evaluated. The extent of degradation of purified cotton cellulose and Fabriano paper after laser treatment as well as after a period of accelerated humid oven ageing was determined by following the changes in the degree of polymerization. While irradiation of paper with the excimer laser at 308 nm results in depolymerization of cellulose accompanied by a decrease in ISO brightness, no detrimental effects of Nd:YAG laser treatments were observed.
Single-pulse damage thresholds of hydrogenated amorphous carbon (a-C:H) films were measured for 8-ns laser pulses at 532-nm wavelength. Layer thicknesses from below the optical penetration depth to above the thermal diffusion length (60 nm13 µm) were examined. After correction of the damage-threshold values for the fraction of energy effectively absorbed by the material, the damage threshold was found to increase linearly with the layer thickness, also for film thicknesses below the optical penetration depth of a-C:H. The threshold fluence reached the bulk value for a layer thickness equal to the thermal diffusion length. The thermal diffusion coefficient was obtained from fitting the experimental data. Several phenomena like graphitization, blistering, exfoliation, and ablation were observed for different fluence regimes and film thicknesses.
Optical fibers made of fused silica are a common method of transmitting high laser pulse energies. Failure of those fibers is a significant risk. The determination of laser-induced damage thresholds (LIDT) on fiber end facets according to ISO 21254 standard is needed. In the past, single pulse nanosecond laser experiments showed an improvement of LIDT with increasing fiber core diameter for 1064 nm wavelength and a constant beam diameter of 50 µm.
This paper pays particular attention to the influence of the laser beam diameter on damage resistance. All-silica fiber types (LEONI) with different core diameters (100–600 µm) were investigated using beam diameters in a range from 30 µm to 100 µm. For comparison experiments on fused silica preform material (Heraeus F300) were performed. On one hand, surface LIDT of fused silica preform material decreases significantly with increasing beam size. A model considering a random distribution of point defects explains the experimental data qualitatively. On the other hand, LIDT of fiber end facets stays constant. White light microscopy results suggest that the point defect density on fiber end facets is lower compared to the preform surface due to an excellent surface polish quality.