Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (25)
- Posterpräsentation (19)
- Zeitschriftenartikel (12)
- Vortrag (5)
Sprache
- Englisch (54)
- Deutsch (6)
- Mehrsprachig (1)
Schlagworte
- RFID sensors (13)
- Smart structures (12)
- Structural health monitoring (12)
- Passive RFID (9)
- Sensors in concrete (9)
- VOC (7)
- Drop test (6)
- RFID (6)
- Dangerous goods packagings (5)
- LoRaWAN (5)
- Long term monitoring (5)
- Multisensor system (5)
- Air quality monitoring (4)
- Concrete (4)
- Embedded sensors (4)
- Fluorescence (4)
- Passive sensor interface (4)
- Sensor requirements (4)
- Structural Health Monitoring (4)
- Structural dynamics (4)
- Embedded sensor (3)
- Environment (3)
- Gas detection (3)
- Impact target (3)
- Long-term requirements (3)
- Monitoring (3)
- Multi sensor device (3)
- Pump control (3)
- SealWasteSafe (3)
- Sensors (3)
- Smart sensors (3)
- Spectroscopy (3)
- Wireless sensors (3)
- Air quality (2)
- Alkali-Activated Mortars (2)
- Digitalisation (2)
- Embedded (2)
- Embedded system (2)
- Energy harvesting (2)
- Environmental monitoring (2)
- Fluorescent sensor (2)
- Localization of gas sources (2)
- Low-cost (2)
- Mobile Robot Olfaction (2)
- Oil (2)
- RFID based sensors (2)
- SHM (2)
- Sensor network (2)
- Structure health monitoring (2)
- Tomographic reconstruction of gas plumes (2)
- Transmission characteristics (2)
- Tunable Diode Laser Absorption Spectroscopy (TDLAS) (2)
- UAV-REGAS (2)
- UHF antenna (2)
- Water quality (2)
- WiFi (2)
- Wireless mobile sensor device (2)
- 3D-Verformungsmessung (1)
- AAM (1)
- Accelerometer (1)
- Acoustic emission (1)
- Aerial Robot (1)
- Agricultural economy (1)
- Alkali-activated mortars (1)
- Ammonia gas sensor (1)
- Bauteilintegrierte Sensoren (1)
- Borehole probe (1)
- Civil engineering (1)
- Corresponding relative humidity (1)
- Corrosion (1)
- Corrugated fiberboard box (1)
- Corrugated fibreboard box (1)
- Corrugated fibreboard boxes (1)
- Digital Certificates (1)
- Digital image correlation (1)
- Digitalisierung (1)
- Drop tests (1)
- DuraBASt (1)
- Dust sensor (1)
- Emmbedded sensor (1)
- Engineered barrier (1)
- Engineered barriers (1)
- Fibre optic sensing (1)
- Finite-element-method (1)
- Fluorescence sensors (1)
- Fluoreszenz (1)
- Foundation (1)
- Gas analysis (1)
- Gas sensors (1)
- Gasmesssystem (1)
- Gassensor (1)
- Ground Robot (1)
- H2Safety@BAM (1)
- Hopkinson bar (1)
- Humidity sensors (1)
- Hydrogen (1)
- Hydrogen technology (1)
- IAQ (1)
- Innenraumluft (1)
- Koordinatenmessung (1)
- LoRaWAN, (1)
- Materials technology (1)
- Mechanical response (1)
- Miniaturized sensor device (1)
- Mobile sensors (1)
- Moisture (1)
- Moisture measurements (1)
- Oil spills (1)
- PCA (1)
- Passive sensors (1)
- Petrol (1)
- Petroleum (1)
- Piezoresistive accelerometers (1)
- Porous building materials (1)
- Portable (1)
- Pssive sensorinterface (1)
- QI Digital (1)
- Quality Infrastructure (1)
- RASEM (1)
- RFID technology (1)
- RFID-based sensors (1)
- Rapid test (1)
- Reinforced concrete (1)
- Richtlinie (1)
- SHT (1)
- Schdensfrüherkennung (1)
- Sensing node (1)
- Sensor (1)
- Sensoren (1)
- Sensorik (1)
- Smartphone (1)
- Standard gas generator (1)
- Steel drum (1)
- Temperature behavior (1)
- Temperature behavior of a piezoresistive accelerometer (1)
- Temperature calibration (1)
- Test Streifen (1)
- Test strip (1)
- Ultrasonic imaging (1)
- Ultrasound (1)
- Verschiebungsfeld (1)
- Vibration analysis (1)
- Wasserstoff (1)
- agricultural economy (1)
- alkali-activated material (1)
- embedded sensor (1)
- environment (1)
- fluorescence (1)
- gas analysis (1)
- spectroscopy (1)
- Öl (1)
Organisationseinheit der BAM
- 8 Zerstörungsfreie Prüfung (39)
- 8.1 Sensorik, mess- und prüftechnische Verfahren (38)
- 8.2 Zerstörungsfreie Prüfmethoden für das Bauwesen (12)
- 1 Analytische Chemie; Referenzmaterialien (8)
- 1.9 Chemische und optische Sensorik (8)
- 3 Gefahrgutumschließungen; Energiespeicher (5)
- 3.1 Sicherheit von Gefahrgutverpackungen und Batterien (5)
- 8.6 Faseroptische Sensorik (4)
- 7 Bauwerkssicherheit (3)
- 7.4 Baustofftechnologie (3)
Paper des Monats
- ja (2)
Eingeladener Vortrag
- nein (5)
The mechanical and geometrical properties of impact targets greatly influence the outcome of a drop test. The International Agreement concerning the International Carriage of Dangerous Goods by Road (ADR) as well as ISO 2248 describe the characteristics of impact targets for drop tests of dangerous goods packagings.
According to these regulations, the impact target’s surface needs to be unyielding, under testing conditions non-deformable, flat, and integral with a mass at least 50 times that of the heaviest packaging to be tested. The problem is that many production facilities, especially manufacturers of corrugated fibreboard boxes, do not have their own testing device with the required 50 times mass ratio of the impact target for a regulation compliant drop test during series production. Furthermore, at UN level it is considered necessary to revise these requirements.
In the present paper, the impact target requirements are examined in detail and compared with those in other technical areas (e.g., impact target for container for the transport of radioactive materials). A research method is being developed to investigate the dependency between the mass ratio of the packaging and the target as well as the damage resistance of a drop tested package in relation to specific design characteristics. The results are of high relevance for industry purposes and intended to ensure a uniform level of safety assessment for the mechanical testing of dangerous goods packagings.
In many cases, science falls back on self-developed prototype systems, which are used and developed for the measurement and execution of the tasks. About 80 % of the development is based on the same hardware design, which is used in only one application scenario and then discarded. For the most part, there are also uncalibrated sensors, since it is costly to calibrate a complicated sensor measurement system or the entire measurement chain since access to the sensor systems is not always available. This paper describes a conceptual design to implement a versatile sensor system with the motivation to fuse the data recording and data reception, which can cover large areas with the help of LoRaWAN (Long Range Wide Area Network) technology. To overcome disadvantages of LoRaWAN, namely the slow data rates, the proposed sensor system can also cover smaller areas with the widespread WiFi technology. An enormous advantage over individual complete systems in the form of a prototype, is the rapid expansion, uncomplicated calibration of the individual sensors and the ecological relief.
A modular design is used, where individual stacks with sensors and peripherals can be added separately. The stacks are standalone low-power systems and can be calibrated, maintained, and replaced separately and do not require the entire measurement chain. The measured and sent values are stored locally on the main stack and sent to the data collector (gateway) and evaluated by means of the automated selection between WiFi and LoRaWAN.
In many cases, science falls back on self-developed prototype systems, which are used and developed for the measurement and execution of the tasks. About 80 % of the development is based on the same hardware design, which is used in only one application scenario and then discarded. For the most part, there are also uncalibrated sensors, since it is costly to calibrate a complicated sensor measurement system or the entire measurement chain since access to the sensor systems is not always available. This paper describes a conceptual design to implement a versatile sensor system with the motivation to fuse the data recording and data reception, which can cover large areas with the help of LoRaWAN (Long Range Wide Area Network) technology [1, 2]. To overcome disadvantages of LoRaWAN, namely the slow data rates, the proposed sensor system can also cover smaller areas with the widespread WiFi technology. An enormous advantage over individual complete systems in the form of a prototype, is the rapid expansion, uncomplicated calibration of the individual sensors and the ecological relief.
A modular design is used, where individual stacks with sensors and peripherals can be added separately. The stacks are standalone low-power systems and can be calibrated, maintained, and replaced separately and do not require the entire measurement chain. The measured and sent values are stored locally on the main stack and sent to the data collector (gateway) and evaluated by means of the automated selection between WiFi and LoRaWAN.
Monitoring of repositories for radioactive waste requires techniques which can be applied long-term under harsh conditions. In this work, the reliability and suitability of materials and a capacitive sensor for measuring relative humidity are investigated, which are to be embedded in the special concrete components for the closure structures of underground repository. Preliminary tests with accelerated aging of the materials used, validation of the sensors under difficult conditions, investigations of the surfaces after aging by pH 14 solution, defined exposure of the sensors in a climatic chamber and the microscope images are discussed. The results will be used for further development and optimization of the RFID based sensor systems which can be applied to monitor the condition of different building structures without cabling.
Within the project SealWasteSafe, we advance construction materials and monitoring concepts of sealing structures applied for underground disposal of nuclear or toxic waste. As these engineered barriers have high demands concerning integrity, an innovative alkali-activated material (AAM) is improved and tested on various laboratory scales. This AAM has low reaction kinetics related to a preferential slow release of the heat of reaction in comparison to alternative salt concretes based on Portland cement or magnesium oxychloride cements. Hence, crack formation due to thermally induced strain is reduced. After successful laboratory scale analysis (Sturm et al., 2021), the AAM is characterised on a larger scale by manufacturing test specimens (100–300 L).
Conventional salt concrete (DBE, 2004) and the newly developed AAM are compared using two specimen geometries, i.e. cylindrical and cuboid. A comprehensive multisensor monitoring scheme is developed to compare the setting process of AAM and salt concrete for these manufactured specimens. The analysed parameters include temperature and humidity of the material, acoustic emissions, and strain variations. Passive sensor systems based on radiofrequency identification technology (RFID) embedded in the concrete, enable wireless access to temperature and humidity measurements and are compared to conventional cabled systems. Additionally, fibre-optic sensors (FOS) are embedded to record strain, but also have potential to record temperature and moisture conditions. Part of this project aims at demonstrating the high reliability of sensors and also their resistance to highly alkaline environments and to water intrusion along cables or at sensor locations. Further technical improvements were implemented so that first results clearly show the scalability of the setting process from previous small-scale AAM experiments and particularly the high potential of the newly developed approaches.
Furthermore, ultrasonic methods are used for quality assurance to detect obstacles, potential cracks and delamination. On the one hand, both active and passive ultrasonic measurements complement the results obtained from the multisensor monitoring scheme for the produced specimens. On the other hand, the unique large aperture ultrasonic system (LAUS) provides great depth penetration (up to nearly 10 m) and can thus be applied at in situ sealing structures built as a test site in Morsleben by the Federal Company for Radioactive Waste Disposal (Bundesgesellschaft für Endlagerung, BGE) as shown by Effner et al. (2021). An optimised field lay-out identified from forward modelling studies and advanced imaging techniques applied to the measured data will further improve the obtained results. To characterise the inside of the test engineered barrier and achieve a proof-of-concept, an ultrasonic borehole probe is developed to enable phased arrays that can further improve the detection of potential cracks. Modelling results and first analysis of semispherical specimens confirmed the reliability of the directional response caused by the phased arrays of the newly constructed ultrasonic borehole probe.
Overall, the project SealWasteSafe improves the construction material, multisensor monitoring concepts and ultrasonics for quality assurance. This will help to develop safe sealing structures for nuclear waste disposal. The outcomes are particularly valuable for salt as a host rock but partly also transferrable to alternative conditions.
The internal project "SealWasteSafe" of the Federal Institute for Materials Research and Testing is dedicated to the further improvement in the construction of sealing systems for underground repositories of radioactive waste. Particularly, a multi-sensory concept is developed to ensure quality assurance and continuous long-term monitoring on the engineered barriers. Therefore, beside other measures, the temperature and equilibrium moisture of the construction shall be monitored and respective multi-sensoric monitoring concepts are tested first on the laboratory scale. One focus in this project is on embedded application in alkali-activated mortars (AAM), which results in special requirements for the resistance of the sensors to strongly alkaline environments with up to pH 14. In addition, the ingress of water along cables or at sensor positions is critical for sensors embedded in concrete, as the cable access of the sensor housing is a major weak point. It is therefore advisable to equip wireless high frequent radio frequency identification-based sensors, so called HF RFID sensors (short: RFID), that do not require cable access and thus have a stable and leak-proof sensor housing for long-term monitoring. In this contribution, the results from temperature, moisture and transmitted power monitoring of a AAM and a M2 specimens by means of HF RFID sensor systems are presented.
The internal project "SealWasteSafe" of the Federal Institute for Materials Research and Testing is dedicated to the further improvement in the construction of sealing systems for underground repositories of radioactive waste. Particularly, a multi-sensory concept is developed to ensure quality assurance and continuous long-term monitoring on the engineered barriers. Therefore, beside other measures, the temperature and equilibrium moisture of the construction shall be monitored and respective multi-sensoric monitoring concepts are tested first on the laboratory scale. One focus in this project is on embedded application in alkali-activated mortars (AAM), which results in special requirements for the resistance of the sensors to strongly alkaline environments with up to pH 14. In addition, the ingress of water along cables or at sensor positions is critical for sensors embedded in concrete, as the cable access of the sensor housing is a major weak point. It is therefore advisable to equip wireless high frequent radio frequency identification-based sensors, so called HF RFID sensors (short: RFID), that do not require cable access and thus have a stable and leak-proof sensor housing for long-term monitoring. In this contribution, the results from temperature, moisture and transmitted power monitoring of a AAM and a M2 specimens by means of HF RFID sensor systems are presented.
This project addresses the application of safe and healthy workplaces in offices, chemical laboratories and other workplaces where indoor air quality plays an important role. The LoRaWAN (Long Range Wide Area Network) is used as a communication interface to make sensor data globally accessible.
The objectives of the project are to create a sensor node and an online and offline system that collects the data from the sensor nodes and stores it on a local server, in a cloud, and also locally on the node to prevent communication failures. An important point in this project is the development of the sensor nodes and the placement of these in the premises, thus no development work is involved in Building the infrastructure.
In the present paper the development of a semi-automated device for long-term monitoring of gaseous ammonia is described. A sensor material was produced that changes its optical properties in the pres-ence of low concentrations of ammonia in air. The implementation into an electronic device enables precise, simple, economic and fast monitoring of low concentrations of harmful gases, like ammonia, and hence can help to improve the climate monitoring in livestock housing, barns or stables.
This project addresses the application of safe and healthy workplaces in offices, chemical laboratories and other workplaces where indoor air quality plays an important role. The LoRaWAN (Long Range Wide Area Network) is used as a communication interface to make sensor data globally accessible.
The objectives of the project are to create a sensor node and an online and offline system that collects the data from the sensor nodes and stores it on a local server, in a cloud, and also locally on the node to prevent communication failures. An important point in this project is the development of the sensor nodes and the placement of these in the premises, thus no development work is involved in Building the infrastructure.