Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (24)
- Deutsch (9)
- Mehrsprachig (1)
Schlagworte
- Betonbrechsand (2)
- Magnetic domains (2)
- Müllverbrennungsasche (2)
- Nachhaltigkeit (2)
- Passive sampling (2)
- Raman microscopy (2)
- X-ray microdiffraction (2)
- Zünder (2)
- 2D nanomaterial (1)
- 3D printing (1)
- Advanced Materials (1)
- Amphiphilicity (1)
- Austenitic Tube Welds (1)
- Beton (1)
- Bewertung (1)
- Black phosphorus (1)
- Brechsande (1)
- Calcined clay (1)
- Computed tomography (1)
- DFG SPP 2005 (1)
- Darkfield imaging (1)
- Drawings (1)
- EBSD (1)
- Einsatzpotenziale Sekundärrohstoffe (1)
- Essential Parameters (1)
- European Standards (1)
- Film Digitalization (1)
- Freshwater (1)
- Funtional Groups (1)
- Grating interferometry (1)
- Hyperbranched (1)
- Identifizierung (1)
- Inverted solar cells (1)
- Kesselsand (1)
- Limestone powder (1)
- Low band-gap (1)
- Micro-computed tomography (1)
- Microspectroscopic imaging (1)
- Microstrain (1)
- Microstrain distribution (1)
- Microstructure (1)
- Mineralöl (1)
- Molecule (1)
- Müllverbrennungsaschen (1)
- Nachhaltig mit Beton bauen (1)
- Nanotechnology (1)
- Natural fracture geometry (1)
- Neutron imaging (1)
- Optical modeling (1)
- Optoelectronics (1)
- Organic solar cells (1)
- Organic–inorganic nanostructures (1)
- PCPDTBT (1)
- POD (1)
- Performance Demonstration (1)
- Pesticide (1)
- Pesticides (1)
- Plate-Dent-Test (1)
- Polycrystalline materials (1)
- Polycrystalline thin films (1)
- Polyglycerol (1)
- Portland cement (1)
- Prüfung Zündstärke (1)
- Prüfungen auf Versagensursache (1)
- Quantitative Analysis (1)
- ROC (1)
- Radiographic Testing (1)
- Raman microspectroscopy (1)
- Reconstruction algorithm (1)
- Recycling (1)
- Reliability of NDE Systems (1)
- Rezyklierte Gesteinskörnung (1)
- Sekundäre Gesteinskörnung (1)
- Sekundärstoff (1)
- Semiconductor (1)
- Shearing gratings (1)
- Sicherheitsventile (1)
- Silver stylus (1)
- Solute transport experiments (1)
- Surface Chemistry (1)
- Sustainable cement (1)
- Synchrotron (1)
- Talbot-Lau (1)
- Talbot-Lau neutron tomography (1)
- Tankfahrzeuge (1)
- Tetracene (1)
- Thin film (1)
- Three-dimensional data quantification (1)
- Tomographic reconstruction (1)
- Tomography (1)
- Untenbefüllung (1)
- Unterwassertest (1)
- Water dispersibility (1)
- Water monitoring (1)
- X-ray DIFFRACTION (1)
- XRF analysis (1)
- Zement (1)
- Ökobilanz (1)
- Überdruck (1)
Organisationseinheit der BAM
- 8 Zerstörungsfreie Prüfung (3)
- 8.6 Faseroptische Sensorik (2)
- 1 Analytische Chemie; Referenzmaterialien (1)
- 1.2 Biophotonik (1)
- 4 Material und Umwelt (1)
- 4.3 Schadstofftransfer und Umwelttechnologien (1)
- 6 Materialchemie (1)
- 6.1 Oberflächen- und Dünnschichtanalyse (1)
- 7 Bauwerkssicherheit (1)
- 7.4 Baustofftechnologie (1)
This paper gives a brief overview on3D imaging of magnetic domains with shearing grating neutron tomography. We investigated the three-dimensional distribution of magnetic domain walls in the bulk of a wedge-shaped FeSi single crystal. The width of the magnetic domains wasanalyzed at different locations within the crystal. Magnetic domains close to the tip of the wedge are much smaller than in the bulk. Furthermore, the three-dimensional shape of individual domains wasinvestigated. We discuss prospects and limitations of the applied measurement technique.
More than 5 million non-electric detonators are used annually in Germany for blasting operations. The relative usage of non-electric detonators amounts to about 50% of all civil blasting operations in Germany. BAM, as the notified body for explosives in Germany, tests non-electric detonators for the purpose of EU-type approval under the civil explosives directive, but also in the context of general investigations, e.g. when misfiring occurs. BAM has all facilities to test these detonators according to the European standard EN 13763. The presentation will cover the test facilities of BAM and address some issues of delay time accuracy. Several advantages and disadvantages of the non-electric ignition system will be discussed in the context of case investigations, and conclusions for mining operations and the advoidance of misfiring will be drawn.
In der Abteilung „Chemische Sicherheitstechnik" der BAM wurden mittels Ultra-Hochgeschwindigkeitsvideotechnik Grundlagenuntersuchungen zu Detonationsverhalten und Splitterwirkung von sogenannte "schlagwettersichern” Sprengzündern in normaler und in explosionsfähiger Atmosphäre durchgeführt. Es konnte eine maximale Splittergeschwindigkeit von 2,4 km/s ermittelt werden.
Microstrain distributions were acquired in functional thin films by high-resolution X-ray microdiffraction measurements, using polycrystalline CuInSe2 thin films as a model system. This technique not only provides spatial resolutions at the submicrometre scale but also allows for analysis of thin films buried within a complete solar-cell stack. The microstrain values within individual CuInSe2 grains were determined to be of the order of 10^-4. These values confirmed corresponding microstrain distribution maps obtained on the same CuInSe2 layer by electron backscatter diffraction and Raman microspectroscopy.
The investigation of the microstructure in functional, polycrystalline thin films is an important contribution to the enhanced understanding of structure–property relationships in corresponding devices. Linear and planar defects within individual grains may affect substantially the performance of the device. These defects are closely related to strain distributions. The present work compares electron and X-ray diffraction as well as Raman microspectroscopy, which provide access to microstrain distributions within individual grains. CuInSe₂ thin films or solar cells are used as a modelsystem. High-resolution electron backscatter diffraction and X-ray microdiffraction as well as Ramanmicrospectroscopy were applied for this comparison. Consistently, microstrain values were determined of the order of 10⁻⁴ by these three techniques. However,only electron backscatter diffraction, X-ray microdiffraction exhibit sensitivities appropriate for mapping local strain changes at the submicrometer level within individual grains in polycrystalline materials.
We present a combined experimental and theoretical study to solve the unit-cell and molecular arrangement of the tetracene thin film (TF) phase. TF phases, also known as substrate induced phases (SIP), are polymorphs that exist at interfaces and decisively impact the functionality of organic thin films, e.g., in a transistor channel, but also change the optical spectra due to the different molecular packing. As SIPs only exist in textured ultrathin films, their structure determination remains challenging compared to bulk materials. Here, we use grazing incidence Xray diffraction and atomistic simulations to extract the TF unit-cell parameters of tetracene together with the atomic positions within the unit-cell.
The impact of fracture geometry and aperture distribution on fluid movement and on non-reactive solute transport was investigated experimentally and numerically in single fractures. For this purpose a hydrothermally altered and an unaltered granite drill core with axial fractures were investigated. Using three injection and three extraction locations at top and bottom of the fractured cores, different dipole flow fields were examined. The conservative tracer (Amino-G) breakthrough curves were measured using fluorescence spectroscopy. Based on 3-D digital data obtained by micro-computed tomography 2.5-D numerical models were generated for both fractures by mapping the measured aperture distributions to the 2-D fracture geometries (x-y plane). Fluid flow and tracer transport were simulated using COMSOL Multiphysics®.
By means of numerical simulations and tomographic imaging experimentally observed breakthrough curves can be understood and qualitatively reproduced. The experiments and simulations suggest that fluid flow in the altered fracture is governed by the 2-D fracture geometry in the x-y plane, while fluid flow in the unaltered fracture seems to be controlled by the aperture distribution. Moreover, we demonstrate that in our case simplified parallel-plate models fail to describe the experimental findings and that pronounced tailings can be attributed to complex internal heterogeneities. The results presented, implicate the necessity to incorporate complex domain geometries governing fluid flow and mass transport into transport modeling.
A thorough characterization of base materials is the prereq- uisite for further research. In this paper, the characterization data of the reference materials (CEM I 42.5 R, limestone pow- der, calcined clay and a mixture of these three components) used in the second funding phase of the priority program 2005 of the German Research Foundation (DFG SPP 2005) are presented under the aspects of chemical and min- eralogical composition as well as physical and chemical properties. The data were collected based on tests performed by up to eleven research groups involved in this cooperative program.
We performed spatially resolved synchrotron-induced x-ray fluorescence analyses (SY-XRF) of five silverpoint drawings from the famous `Karlsruhe sketchbook´ and a silverpoint, which is assumed to be an original one used by the Renaissance artist Hans Baldung Grien (1484-1545) himself. The silverpoint, one out of a very small number of ancient styli conserved nowadays, is fixed on the so-called `Karlsruhe sketchbook´. Measurements were executed at the FLUO-TOPO beamline at the electron storage ring ANKA. It has been shown, that SY-XRF at this beamline is nondestructive and sensitive enough for the analysis of minor and major elements in the silver strokes. This study provides new insights into this graphical technique and ancient drawing instruments: results are that three drawings have been created with a common type of silverpoint containing about (10.4 ± 0.7) wt% of Cu. In all the cases, Hg at a 10% level by weight was identified in the strokes. Presence of Hg is not due to the original silver alloy, but is a result of a general alteration phenomenon of silverpoint drawings. This fact is confirmed by the analysis of the original silverpoint, which contains only small traces of Hg. The result for the copper content of the silverpoint (10.4 ± 1.7) wt% is in good agreement with that of these three drawings. It is supposable that the silverpoint found attached today served for the creation of the corresponding drawings. Moreover, the graphical technique of Baldung is found to be continual over three decades. Only one very late drawing dated to 1543 was probably realized with another silverpoint, containing about 3 wt% of Cu. This difference in the chemical composition of drawings from the late period might be used as a more precise dating indicator of Baldung drawings that are not clearly attributed to a certain period.
We compare standard and inverted bulk heterojunction solar cells composed of PCPDTBT:PC70BM
blends. Inverted devices comprising 100 nm thick active layers exhibited short circuit currents of
15 mA/cm², 10% larger than in corresponding standard devices. Modeling of the optical field distribution
in the different device stacks proved that this enhancement originates from an increased absorption of
incident light in the active layer. Internal quantum efficiencies (IQEs) were obtained from the direct
comparison of experimentally derived and modeled currents for different layer thicknesses, yielding IQEs
of ~70% for a layer thickness of 100 nm. Simulations predict a significant increase of the light harvesting
efficiency upon increasing the layer thickness to 270 nm. However, a continuous deterioration of the
photovoltaic properties with layer thickness was measured for both device architectures, attributed to
incomplete charge extraction. On the other hand, our optical modeling suggests that inverted devices
based on PCPDTBT should be able to deliver high power conversion efficiencies (PCEs) of more than
7% provided that recombination losses can be reduced.
One-pot covalent functionalization of 2D black phosphorus by anionic ring opening polymerization
(2022)
In this work, a one-pot approach for the covalent functionalization of few-layer black phosphorus (BP) by anionic ring opening polymerization of glycidol to obtain multifunctional BP-polyglycerol (BP-PG) with high amphiphilicity for near-infrared-responsive drug delivery and biocompatibility is reported. Straightforward synthesis in combination with exceptional biological and physicochemical properties designates functionalized BP-PG as a promising candidate for a broad range of biomedical applications.
Organic and inorganic nanoparticles (NPs) are increasingly used as drug carriers, fluorescent sensors, and multimodal labels in the life and material sciences. These applications require knowledge of the chemical nature, total number of surface groups, and the number of groups accessible for subsequent coupling of e.g., antifouling ligands, targeting bioligands, or sensor molecules. To establish the concept of catch-and-release assays, cleavable probes were rationally designed from a quantitatively cleavable disulfide moiety and the optically detectable reporter 2-thiopyridone (2-TP). For quantifying surface groups on nanomaterials, first, a set of monodisperse carboxy-and amino-functionalized, 100 nm-sized polymer and silica NPs with different surface group densities was synthesized. Subsequently, the accessible functional groups (FGs) were quantified via optical spectroscopy of the cleaved off reporter after its release in solution. Method validation was done with inductively coupled plasma optical emission spectroscopy (ICP-OES) utilizing the sulfur atom of the cleavable probe. This comparison underlined the reliability and versatility of our probes, which can be used for surface group quantification on all types of transparent, scattering, absorbing and/or fluorescent particles. The correlation between the total and accessible number of FGs quantified by conductometric titration, qNMR, and with our cleavable probes, together with the comparison to results of conjugation studies with differently sized biomolecules reveal the potential of catch-and-release reporters for surface analysis. Our findings also underline the importance of quantifying particularly the accessible amount of FGs for many applications of NPs in the life sciences.
We demonstrate the use of a 3D printed radial collimator in X-ray powder diffraction and surface sensitive grazing incidence X-ray diffraction. We find a significant improvement in the overall Signal to background ratio of up to 100 and a suppression of more than a factor 3⋅10⁵ for undesirable Bragg reflections generated by the X-ray “transparent” windows of the sample environment.
The background reduction and the removal of the high intensity signals from the windows, which limit the detector’s dynamic range, enable significantly higher sensitivity in experiments within sample environments such as vacuum chambers and gas- or liquid-cells. Details of the additively manufactured steel collimator geometry, alignment strategies using X-ray fluorescence, and data analysis are also briefly discussed. The flexibility and affordability of 3D prints enable designs optimized for specific detectors and sample environments, without compromising the degrees of freedom of the diffractometer.