Filtern
Dokumenttyp
Referierte Publikation
- nein (2)
Schlagworte
- Austenitic Stainless Steel (1)
- Drop Evaporation Test (1)
- Hot Cracking (1)
- Laser Welding (1)
- Ni-Base Alloy (1)
- Stress corrosion Cracking (1)
Eine Reihe nichtrostender austenitischer Cr-Ni-Stähle in der Nähe der eutektischen Rinne können beim Laserschweißen sowohl primär ferritisch als auch primär austenitisch erstarren. Speziell konzipierte Heißrißprüfungen zeigen eine Rißanfälligkeit der im Unterschied zum WIG-Schweißen mit großen Streckenenergien beim Laserschweißen mit kleinen Streckenenergien primär austenitisch erstarrenden Gefügebereiche. Die Ursache dafür ist, daß im Unterschied zu einer langsamen primär ferritischen Erstarrung bei einer schnellen Erstarrung über metastabile primär austenitische Zustände Restschmelzen entstehen können, die gegenüber dem Grundwerkstoff erhebliche temperaturabhängige Zähigkeitsverluste aufweisen. Es wird gezeigt, wie sich durch die Wahl auf den Werkstoff gezielt abgestimmter Schweißparameter die Heißrißsicherheit beim Laserschweißen weitestgehend sicherstellen läßt. Darüber hinaus werden Perspektiven vorgestellt, wie die Heißrißsicherheit bei Hybridschweißen durch die Auswahl vom Zusatzwerkstoffen und durch eine geeignete Prozeßführung zu erreichen ist.
Hot cracks as stress corrosion cracking initiation sites in laser welded corrosion resistant alloys
(2005)
Although hot cracks at weld surfaces of corrosion resistant alloys (CRAs) might provide access to respective aggressive media and thus, might provide the conditions for a local potential and pH drop, the interaction between hot cracking and corrosion phenomena has not been investigated up to the present. This particularly concerns the initiation of stress corrosion cracking inside such crevices.
As a first approach to clarify the influence of hot cracks on corrosion resistance, considering particularly stress corrosion cracking, hot crack afflicted laser welds of three different CRAs have been subjected to a series of different corrosion tests.
Besides the fact that the Drop Evaporation (DE) Test represents a more realistic procedure than standard immersion tests it turned out that hot cracks can obviously represent an initiation site of stress corrosion cracking in the austenitic stainless steel AISI 309 (German No. 1.4828). The susceptibility of such hot crack afflicted laser welds to stress corrosion cracking (SCC) significantly depends on temperature and chloride concentration of the test environment In comparison, the high nitrogen austenitic stainless steel AISI S 34565 (German No. 1.4565) did not exhibit any stress corrosion cracking associated with hot cracking. This material exhibited pitting corrosion and stress corrosion only in the base material. The Alloy 50 (German No. 2.4850), a Nickel based material, was susceptible to pitting corrosion, but showed no tendency towards stress corrosion cracking at all.