Filtern
Dokumenttyp
Schlagworte
- Bitumen (5)
- FTIR (3)
- Anwendungsmöglichkeiten (2)
- Arbeitsanleitung (2)
- Bitumen und bitumenhaltige Bindemittel (2)
- FTIR-Spektroskopie (2)
- Multivariate analysis methods (2)
- Präzision (2)
- Ageing (1)
- Ageing behaviour (1)
- Antioxidant additives (1)
- Asphalt (1)
- Asphalt oxidation (1)
- Asphaltene content (1)
- Asphaltstraße (Oberbau) (1)
- BBR (1)
- Binder aging (1)
- Binder chemistry (1)
- Binder rheology (1)
- Bitmuinöses Mischgut (1)
- Bituminous binders (1)
- Characterisation (1)
- Charakterisierung (1)
- Chemometrie (1)
- Column chromatography (1)
- Conventional testing (1)
- Cyclic reuse (1)
- DSR (1)
- FTIR spectroscopy (1)
- FTIR-ATR (1)
- Identification and quantification of additives (1)
- Identifizierung von Additiven (1)
- Mechanik (1)
- Multiple ageing and rejuvenation (1)
- Multiple reuse (1)
- Multivariate Analysemethoden (1)
- Multivariate evaluation (1)
- Polycyclic aromatic hydrocarbons PAH (1)
- Polymers (1)
- Rapid procedure for binder extraction (1)
- Reclaimed asphalt (1)
- Recycling (1)
- Rejuvenator (1)
- Schicht (1)
- Vergleichsuntersuchung (1)
- Vergleichuntersuchung (1)
- Waxes (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (9)
- 7.1 Baustoffe (9)
Oxidative aging induces significant stiffening of asphalt binders that leads to a pronounced reduction in the overall durability of asphalt pavements. The strategic implementation of antioxidant additives provides a potential solution to alleviate this issue. This work presents results from the second phase of the global consortium for antioxidants research aimed at investigating the effectiveness of potential antioxidants in increasing the durability of asphalt binders. Sixteen laboratories around the world participated in this effort and a total of 28 binders from diverse geographical regions were tested. Two promising antioxidants, namely zinc diethyldithiocarbamate (ZDC) and kraft lignin were evaluated in this phase and blended with the binders at specific proportions. Subsequently, a comprehensive investigation was conducted to assess rheological characteristics and chemical properties of the various blends, utilising Dynamic Shear Rheometer (DSR) measurements and Fourier Transform Infrared (FTIR) Spectroscopy. The findings indicate that additives such as ZDC hold considerable promise as an effective antioxidant, particularly when considering a wide diversity of binders. In general, its incorporation does not compromise the rutting performance of the binders and significantly improves fatigue performance. Therefore, research efforts should be focused on exploring additional facets to assess its practical applicability in field.
Reclaimed asphalt pavements (RAP) with increased contents of polycyclic aromatic hydrocarbons (PAH) are restricted for reuse due to their harmful effects on humans and the environment. This work investigated whether Fourier transform infrared (FTIR) spectroscopy is suitable for a fast and simple identification and quantification of PAH in binders recovered from reclaimed asphalts. For this, the binders from 34 RAP samples were recovered using a rapid procedure developed at the Universität Kassel and were examined with infrared spectroscopy. The obtained spectra were pre-processed (Standard Normal Variate transformation, 1st derivative) and evaluated using a combination of factor analysis and linear discriminant analysis. The results showed that various PAH groups with differently pronounced aromatic structures are present in the binders.
However, with FTIR spectroscopy combined with the multivariate methods, a statistical model was developed allowing for the differentiation between the PAH groups and also for the distinction between PAH contents below or above the threshold of 25 mg/kg valid in Germany.
Single reuse of asphalt is an approved practice, but its success highly depends on restoring the properties of the aged binder. Rejuvenators have become increasingly important for softening the binder because they make it possible to increase the amount of reclaimed asphalt pavement (RAP) while reducing the dependence on virgin bitumen. The vital questions to be investigated are how the rejuvenators affect the ageing properties of bitumen and if rejuvenators offer the possibility of cyclic bitumen reuse. The main objective of this publication is to present the current state of the art regarding the effects of rejuvenators on bitumen ageing. The results of laboratory life cycle simulations indicate that repetitive ageing and rejuvenation processes are possible, but reuse mainly depends on the rejuvenator type and its interaction with the respective bitumen sample. There are rejuvenators that have good rejuvenating properties but accelerate subsequent ageing, which is essential to consider when evaluating a rejuvenator. Bitumen rejuvenated with petroleum-based products, such as aromatic extracts, performs slightly better after subsequent ageing than when rejuvenated with bio-based products. As there are a limited number of studies simulating cyclic bitumen reuse, more studies are necessary to evaluate the general limits of bitumen reuse.
Die Fourier-Transformations-Infrarot-Spektroskopie (FTIR-Spektroskopie) stellt eine innovative und wirkungsvolle Methode zur Charakterisierung von Bitumen und bitumenhaltigen Bindemitteln dar. So erlaubt die FTIRCharakterisierung nicht nur eine Bewertung des Alterungsfortschritts eines Bindemittels, sondern zudem auch die Identifizierung von im Bitumen enthaltenen Additiven und Schadstoffen wie z. B. polyzyklischen aromatischen Kohlenwasserstoffen (PAK), die Ableitung verschiedener physikalischer und chemischer Kennwerte sowie weiterhin eine Klassifizierung von Bindemitteln nach verschiedenen übergeordneten Eigenschaften wie der Raffinerie, dem Alterungszustand und auch der Alterungsempfindlichkeit.
In this work, a methodology based on Fourier transform infrared (FTIR)spectroscopy and multivariate evaluation is presented to estimate the aging sensitivity of bitumen based on the unaged samples and thus without the need for time- and material-consuming aging simulations. For this purpose, factor analysis and linear discriminant analysis are used to develop a statistical model based on the FTIR spectra of unaged bitumen samples, which can be used fast and simple in everyday laboratory work and allows to assign the bitumen to a low, moderate, or strong aging sensitivity. The evaluation of the aging sensitivity is based on the complex shear modulus|G* | and the phase angle δ from the measurement with a dynamic shear rheometer(DSR), whose aging-related changes were captured as the slope in the Black diagram. A relevant influence on the classification concerning the aging sensitivity has the oxygen-containing compounds(sulfoxide, hydroxyl and partly carbonyl compounds), whereby lower contents and thus less preaged bitumen tend to have a stronger aging sensitivity. However, in addition to the oxygen-containing compounds, the structure of the aliphatic and aromatic compounds and, in particular, the interaction of the different structures are decisive for the aging sensitivity
Bitumen is a crucial building material in road construction, which is exposed to continuously higher stresses due to higher traffic loads and changing climatic conditions. Therefore, various additives are increasingly being added to the bitumen complicating the characterisation of the bituminous binder, especially concerning the reuse of reclaimed asphalt.
Therefore, this work aimed to demonstrate that the combination of Fourier transform infrared (FTIR) spectroscopy with attenuated total reflexion (ATR) technique and multivariate evaluation is a very wellsuited method to reliable identify and quantify additives in bituminous binders. For this purpose, various unmodified and modified binders, directly and extracted from laboratory and reclaimed asphalts, were investigated with FTIR-ATR spectroscopy. The determined spectra, pre-processed by standard normal variate (SNV) transformation and the determination of the 1st derivation, were evaluated using factor Analysis (FA), linear discriminant analysis (LDA) and partial least square regression (PLSR). With this multivariate evaluation, first, a significant model with a very high hit rate of over 90% was developed allowing for the identification of styrene-butadiene copolymers (SBC), ethylene-copolymer bitumen (ECB) and different waxes (e.g. amide and Fischer-Tropsch wax) even if the additives do not show any additional peaks or the samples are multi-modified. Second, a quantification of the content is possible for SBC, ECB, and Amide wax with a mean error of RMSE B 0.4 wt% and a
coefficient of determination of R2[90%. Based on these results, FTIR identification and quantification of additives in bituminous binders is a very promising method with a great potential.
Development of a test system for identifying the bitumen type and the modifier used in a reclaimed asphalt Da Polymer-, Gummi-, wachs- und mehrfachmodifizierte Bitumen seit Jahren im Asphaltstraßenbau eigesetzt werden, kommen diese vermehrt im Ausbauasphalt vor. Zur Bewertung des Ausbauasphalts ist es daher notwendig, die Modifizierungen an der Mischanlage zu identifizieren. Die Ausbildung des Bindemittelsacks beim Erweichungspunkt Ring und Kugel ist charakteristisch für die Modifizierung. Hierdurch können wachsmodifizierte Bitumen (WmB) recht präzise und Polymermodifizierten Bitumen (PmB) teilweise identifiziert werden. Mittels Differential Scanning Calorimetry (DSC) werden die Schmelztemperaturen der Wachse erfasst. Hierdurch können WmB identifiziert und die Wachsarten unterschieden werden. Die Analytik mittels Dynamischem Scherrheometer (DSR) startet mit der Bestimmung der Äquisteifigkeitstemperatur EG*T. Bei EG*T werden Frequenz-, Amplituden- und MSCR-Tests durchgeführt. Die Grenze des LVE-Bereichs dient der Identifizierung von WmB. Anhand der Kennwerte bei 0,1 Hz können PmB erkannt werden. Die Rückformung (MSCRT) dient der Identifizierung von Mehrfachmodifizierungen. Da Gummimodifizierte Bitumen (GmB) bei der Extraktion erkannt werden, können alle Modifizierungsarten identifiziert werden. In den FTIR-Spektren (Fourier-Transformations-Infrarotspektroskopie) der modifizierten Bitumen verursachen einige Polymere und Wachse charakteristische Banden, wodurch diese erkannt werden. Die Identifizierung der übrigen Additive erfolgt mithilfe einer multivariaten Auswertung, wodurch mit Ausnahme der GmB (nicht erforderlich) alle Additive erkannt werden. An Stichproben konnte zudem eine Abgrenzung von Mehrfachmodifizierungen sowie eine Abschätzung der Zugabemenge erreicht werden. DSR und FTIR ermöglichen beide eine schnelle, einfache und zielsichere Identifizierung der Bitumenmodifizierungen. Durch die FTIR-Analytik können die Modifizierungen mit der größtmöglichen Präzision bestimmt werden. Die DSR-Analytik erlaubt dafür zusätzlich eine baupraktische Bewertung der Bindemittel.
As polymer, rubber, wax and multi-modified bitumen are used for asphalt road construction since many years, they increasingly occur in reclaimed asphalt. To assess the reclaimed asphalt, it is therefore necessary to identify the modifications in the mixing plants. The formation of the binder bag at softening point ring and ball is characteristic for modification. In this way, wax modified bitumen (WmB) can be identified rather precisely and to a less extent polymer modified bitumen (PmB) can also be identified. Differential scanning calorimetry (DSC) is used to record the melting temperatures of the waxes. In this way, WmB can be identified and a differentiation can be made between the wax types. The analysis by means of the dynamic shear rheometer (DSR) starts with the determination of the equi-stiffness temperature EG*T. Frequency-, amplitude- and MSCR-tests are performed at EG*T. The limit of the LVE range is used to identify WmB. PmB can be identified based on the characteristic values at 0.1 Hz. Creep recovery (MSCRT) is used to identify multi-modifications. As rubber modified bitumen (GmB) is identified on extraction, all types of modification can therefore be identified. Several polymers and waxes cause characteristic bands in the FTIR spectra (Fourier Transform Infrared spectroscopy) of modified bitumen, which enables the identification of these additives. The other additives except the GmB (not necessary) can be identified by means of multivariate model. Further, due to random evaluations, the differentiation between single- and multi-modification as well as the estimation of the content of some additives is possible. DSR and FTIR both enable fast, simple and accurate identification of the bitumen modification. The modification can be determined with the greatest possible precision by using FTIR analysis. On the other hand, DSR analysis allows additional practical assessment of the binder on site.
In Germany, the reuse of asphalt has a long tradition. Since the 1980s, the reclaimed asphalt has been recycled achieving a reuse rate of around 90% and thus a very high value in the last years. In the future, instead of the amount, the quality of the reclaimed asphalt will be more important because the recycled asphalt will be reused again and again. Thus, these asphalt mixes are in the second or even third cycle of reuse. Concerning this situation, the question arises if asphalt can be reused several times without any loss in quality. An important factor affecting the asphalt quality is the binder bitumen. During the production, construction and service life, the ageing of this binder occurs causing a hardening of the bitumen. To compensate this hardening, additives for the reclaimed asphalt in terms of rejuvenation agents (rejuvenators) gain in importance. With these rejuvenators, the physical properties of bitumen can be modified e.g. the hardness and the stiffness reduced. However, the mechanism of the rejuvenation agents and the effects of the bitumen chemistry are largely unknown because the composition of the products varies very strongly. But with growing knowledge about these mechanisms and effects of the rejuvenation agents, the chemical composition and thus the physical and ageing behavior of bitumen can be targeted modified by the use of suitable rejuvenators. In this work, the actual results of the project Postcarbone road should be presented including investigations about the chemical and physical mechanisms as well as the efficiency of different rejuvenators.
Further, a model for the cyclic reuse of bitumen should be developed. Based on this model, the choice of a suitable rejuvenation agent for the considered bitumen or rather asphalt should be possible. The project Postcarbone road (392670763) is funded by the German Research Foundation (DFG).
Das erdölstammige Bindemittel Bitumen weist eine so komplexe Struktur auf, dass diese mit den derzeit eingesetzten Verfahren nur eingeschränkt erfasst werden kann. Eine innovative und vielversprechende Möglichkeit bietet in diesem Zusammenhang die FTIR-Spektroskopie in Kombination mit einer chemometrischen Auswertung, mit der schnell und einfach Aussagen über die Zusammensetzung sowie verschiedenste physikalische und chemische Eigenschaften von bitumenhaltigen Materialien möglich werden.