Filtern
Dokumenttyp
Schlagworte
- Zeughaus, Berlin (2)
- Bauteil (1)
- Bending strength (1)
- Brandprüfung (1)
- CFD Simulation (1)
- Concrete (1)
- Coniophora puteana (1)
- Construction materials (1)
- Cu-HDO (1)
- DNA patterns (1)
Eingeladener Vortrag
- nein (3)
Druck-Abbau
(2003)
Johannes Liese im Holzschutz
(2002)
The method requires two parallel boreholes in the specimen in which two microwave antennae can be moved. The moisture content in the material can be calculated from the microwave intensity transmitted between the two boreholes. Moisture profiles along the boreholes can be obtained by moving the antennae in steps along the length of the boreholes and taking measurements at each step.
The microwave frequencies used in the laboratory measurements ranged from 8 to 16.5 GHz in steps of 0.5 GHz. The diameters of the antennae were between 7 and 9 mm, and of the boreholes between 8 and 12 mm. The microwave method produced measurement uncertainties between 0 and 2% by volume for all the materials studied in this report.
The fungus cellar test is a common means to get reliable data on the long term performance of treated wood in soil contact. A constantly high humidity and a suitable of water holding capacity for a range of micro-organisms provide high decay rates in untreated wood and produce intensive microbial pressures on wood treated with biocides. Presently a range of biocides are under test in the BAM fungus cellar and the results will be presented for the following types of biocides: Tebuconazole in combination with copper and boron (5 years fungus cellar), quats with copper and boron (5 years fungus cellar) and Cu-organic compound combined with copper and boron (3 years fungus cellar). Figures will be shown on the development of the Modulus of Elasticity (MOE) over the years and on an assessment of the stakes according to EN 252.
Environmental Risk Assessment of Treated Timber in Service - the Environment Focus Group Approach
(2000)
In the context of the Biocidal Products Directive (98/8/EC), and of the OECD work on wood preservatives, the Environment Focus Group (EFG), comprising 8 institutes and the European Wood Preservative Manufacturers Group, has been working on the environmental risk assessment of treated timber in service. A literature review of emissions from treated timber has revealed that very little existing data is usable for environmental risk assessment; the most relevant data are kinetic curves of emissions over time, which show clearly the non-linear emissions behaviour of treated wood over time. The EFG has suggested real exposure conditions for treated timber in the environment, and listed typical exposure scenarios. Five representative scenarios are characterised in detail, for use in the calculation of Predicted Environmental Concentrations (PECs). The existing methods to determine emissions from treated wood have been reviewed. Most existing experimental models cannot be used to predict environmental emissions. Monitoring of commodities in service has its specific constraints. Chemical analysis and ecotoxicity testing have also been reviewed and their relationship has been discussed. Principles for the design of experimental models, for the determination of emission fluxes from treated wood to the environment, have been established.