Filtern
Dokumenttyp
Sprache
- Englisch (9)
Referierte Publikation
- nein (9)
Schlagworte
- BAM-List (9) (entfernen)
Use of Corrosion Resistant High-Alloyed Metallic Materials for Transport Tanks of Dangerous Goods
(2005)
In Germany the BAM-List Requirements for Tanks for the Transport of Dangerous
Goods is the basis for substance-related prototype approvals for tank containers designed for
the carriage of dangerous goods. Such approval is undertaken by the Federal Institute for
Materials Research and Testing (BAM). Compatibility evaluations of selected metallic
material groups as well as of polymeric gasket and lining materials under the influence of
dangerous goods and water-polluting substances are published in section 5 of the BAM-List.
According to the relevant regulations for rail, road and sea transportation a compulsory
internal inspection after certain intervals is required. The required corrosion resistance
depends on the length of the inspection interval.
There is a large number of dangerous goods with a high corrosivity to metals, where the standard
steels are not corrosion resistant. Chemical companies, transportation providers and tank
producers need tanks made of corrosion-resistant materials in order to protect the tank shell
and prevent contamination of high-value cargo as well as the environment. One solution is to
line the tank with a polymeric material, an alternative solution to corrosion problems is the
application of high-alloyed materials.
Only a narrow limited number of corrosion test results of these high-alloyed materials under
the influence of corrosive dangerous goods are available. In order to change this situation and
include the superaustenitic steels X1NiCrMoCuN25-20-7 (Alloy 926), X1NiCrMoCu32-28-7
(Alloy 31) and the nickel-based alloy NiCr23Mo16Al (Alloy 59) in the BAM-List, BAM,
IKS Dresden and ThyssenKrupp VDM started an comprehensive test program with welded
specimens made. The program comprises corrosion resistance evaluations of the high-alloyed
materials in substances representing 12 major groups of corrosive dangerous goods (e.g.
inorganic halogenides, organic acidic halogenides, halogenic carbonic acids, chlorosilanes,
chlorates, perchlorates, chlorites, hypochlorites and hydrogen sulphates).
The test results, presented in this paper, will be included in the upcoming 8th edition of the
BAM-List and therefore available for the costumer.
Evaluation of the resistance of alloy 31 and alloy 59 for the transport of mixed acids in tanks
(2007)
Use of higher-alloyed metallic materials and duplex steels for transport tanks of dangerous goods
(2011)
Compatibility evaluations of selected metallic materials under the influence of dangerous goods are published in the BAM-List - Requirements for Tanks for the Transport of Dangerous Goods” as basis for substance-related prototype approvals for tank Containers designed for the carriage of dangerous goods.
There is a request of the tank manufacturing industry and transportation Companies to incorporate additional materials into the BAM-List, especially corrosionresistant materials because of the large number of corrosive dangerous goods.
One solution to solve corrosion Problems is to line the tank with a polymeric material, an alternative solution is the application of high-alloyed stainless steels and nickel-based alloys as there are alloy 926 (1.4529), alloy 31 (1.4562) and alloy 59 (2.4605).
But there is an interest to use cost-efficient steels with high strength values and concomitant adequate corrosion resistance such as duplex Steel 1.4362 too. This Steel grade was originally developed as a substitute for the austenitic grades 1.4404 and 1.4571. Due to the lower content of the alloy elements nickel and molybdenum this duplex steel is a cost-efficient alternative to molybdenum containing austenite.
Due to the limited number of corrosion test results with welded test samples of these high-alloyed materials and the duplex steel under the influence of corrosive dangerous goods a comprehensive test Programme was performed with these materials in Cooperation with ThyssenKrupp VDM and Deutsche Edelstahlwerke GmbH.
It can be concluded from the test results that the "superaustenitic steels” 1.4529 and 1.4562 as well as the nickel-based alloy 2.4605 are a really good alternative as tank materials for the transport of dangerous goods in comparison to the lining of the tanks. Due to the reduced alloying content, in particular Nickel (3.7 %) and Molybdenum (0.15 %), a lower resistance of the duplex steel 1.4362 compared to the austenitic CrNiMo-steels was observed in acidic media. The duplex Steel is an alternative to the austenitic steels, especially in alkaline media. The test results are included in the current 10th edition of the BAM-List and therefore available for the costumer.