Filtern
Erscheinungsjahr
- 2022 (9) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (3)
- Vortrag (3)
- Beitrag zu einem Tagungsband (2)
- Sonstiges (1)
Schlagworte
- Thermography (3)
- Additive Manufacturing (1)
- Aktive Thermografie (1)
- Concrete (1)
- Contact area (1)
- Defect detection (1)
- Delamination depth (1)
- Delamination width (1)
- Eddy-current testing (1)
- Effusivity (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (3)
Additive manufacturing (AM) technologies, generally called 3D printing, are widely used because their use provides a high added value in manufacturing complex-shaped components and objects. Defects may occur within the components at different time of manufacturing, and in this regard, non-destructive techniques (NDT) represent a key tool for the quality control of AM components in many industrial fields, such as aerospace, oil and gas, and power industries. In this work, the capability of active thermography and eddy current techniques to detect real imposed defects that are representative of the laser powder bed fusion process has been investigated. A 3D complex shape of defects was revealed by a μCT investigation used as reference results for the other NDT methods. The study was focused on two different types of defects: porosities generated in keyhole mode as well as in lack of fusion mode. Different thermographic and eddy current measurements were carried out on AM samples, providing the capability to detect volumetric irregularly shaped defects using non-destructive methods.
Up to now, the inspection of wind turbines with industrial climbers has been considered ”state of the art”. However, ever-larger wind turbines and advancing digitization make modern and automated inspection methods indispensable. Passive thermography can serve as such a digital and atomized method while it is well known for its applications in the inspection of buildings or electrical circuits. However, its application relies on thermal gradients in the inspected object such that a temperature contrast exists between damaged and sound areas. This also holds for unheated structures like rotor blades of wind turbines which show no intrinsic temperature gradient and can hardly be heated. Under certain weather conditions with sufficient solar loading and diurnal temperature variations, passive thermography is suitable for the in-service inspection of rotor blades. However, for a reliable use of passive thermography on ”thermal passive” components, the incorporation of these environmental conditions in the planning and evaluation of thermal inspections is crucial. Additionally, the complex inner structure of wind turbine blades in comparison to other objects and buildings require a specific method referencing the individual rotor blades to each other. This allows the distinction between the thermal response of design-specific structural features and damages or irregularities between the three blades. We show thermal signatures of damage in rotor blades and contrast them with structural characteristics by comparing the three blades. In addition to measurements in industrial environments, laboratory measurements are shown and compared to simulations. The long-term goal is to simulate the influence of different weather parameters and thus gain a better understanding of measurements in the field. The results shown here can be seen as one step towards industrial application.
The evaluation of thermal properties is probably an underrated tool for the onsite health monitoring of concrete structures. The photothermal approach offers a possibility to realize a real onsite measurement. This contribution presents the application of the photothermal approach under lab conditions on three different concrete types. The obtained results were compared with those of a commercial device based on the Transient Plane Source (TPS) method. Both agreed well within the estimated uncertainty ranges and therefore demonstrate the applicability of the photothermal method for this kind of investigations. First results of a concrete sample with different water contents support the potential of this method for the characterization of concrete in general.
Der Einsatz von Simulationen mit FEM (Finite Element Method) ermöglicht die die quantitative Beschreibung von Wärmeleitungsprozessen in komplexen Geometrien, bei denen analytische Ansätze nicht angewandt werden können, weil die zugrunde liegenden Vereinfachungen nicht gelten. Bei der genauen Modellierung eines kompletten thermografischen Experiments sieht sich der Modellierer einer ganzen Reihe von technischen und physikalischen Parametern gegenüber, die nicht immer bekannt sind und daher geschätzt werden müssen. Im konkreten Fall wurde ein relativ einfaches Experiment mit einfachen Geometrien betrachtet: ein durch Additive Manufacturing gefertigter Metallblock wurde mit einem Laserpuls homogen erwärmt. Aus dem Zeitverlauf der Oberflächentemperatur an der nicht erwärmten Rückseite des gleichmäßig dicken Blocks sollte die thermische Diffusivität des Volumenmaterials ermittelt werden. Bei dem Versuch, die experimentellen Daten durch eine passende Simulation zu beschreiben, ergab sich zunächst eine deutliche Abweichung: die gemessenen Temperaturen waren generell zu niedrig, was auf einen zusätzlichen Wärmeverlustmechanismus hinwies. Es erwies sich, dass die freie Auflage des Materialblocks auf einem flachen Bolzen zur Probenfixierung bei der Simulation des Experiments zu berücksichtigen ist, um eine gute Übereinstimmung zwischen Experiment und thermischer Simulation zu erzielen. Der Beitrag illustriert damit die Möglichkeiten und Potentiale von FEM-Simulationen bei der quantitativen Bewertung von thermografischen Inspektionen zur zerstörungsfreien Prüfung.
The knowledge of the thermal parameters of a particular concrete is essential for thermal design of a building, but also could help to identify and assess the state of a concrete structure. Active thermography has the potential to be applied onsite and to provide a fast investigation of thermal properties. In this work, three different concrete samples were investigated by active thermography in reflection and in transmission setup. It was found that this method yields the same results without direct contact as the Transient Plane Source (TPS) method as an established inspection tool.
Evaluation of passive Thermography for the inspection of wind turbine blades. Comparison of passive thermography from the ground with drone-supported images and active thermography. Better understand the influence of weather conditions through field measurements. Development of an inspection planning tool that incorporates weather forecasts. Use FEM simulations to predict thermal contrasts of different damages under different environmental conditions.
A semi-automatic thermographic procedure for the assessment of the welded area of resistance projection welded joints has been developed. Currently, to assess the quality of RPW joints destructive tests are used and the more commonly used non-destructive technique is the ultrasonic one. The possibility for a quantitative evaluation of the welded area by thermographic technique has been proved by means of an innovative procedure applied on steel RPW joints with ‘as it’ surface conditions. Measurements obtained by thermography and ultrasound have been compared, to verify the developed procedure.