Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (14)
Sprache
- Englisch (14)
Schlagworte
- ESR spectroscopy (2)
- Mössbauer (2)
- Mössbauer spectroscopy (2)
- Thermal analysis (2)
- A. Inorganic compounds (1)
- A549 (1)
- Ab initio calculations (1)
- Activation/deactivation processes (1)
- Al2O3 (1)
- Alpha-helix (1)
Organisationseinheit der BAM
Two iron(III) spin crossover complexes [Fe(5Cl-L)(NCS)] (1) and [Fe(5Cl-L)(NCSe)] (2) were synthesized with the pentadentate Schiff base ligand 5Cl-L and thiocyanato and selenocyanato as coligands. 5Cl-L, as an asymmetric {N3O2} donor Schiff base, was synthesized by a condensation reaction of 5-chlorosalicyladehyde using the asymmetric N-(2-aminoethyl)-1,3-propanediamine. The complexes exhibited a spin crossover at 280 (1) and 293 K (2), respectively, and were subjected to electron spin resonance (ESR) and Mössbauer spectroscopy at 77, 295 and 325 K. Ab initio CASSCF calculations followed by the NEVPT2 method were applied for predicting the g-tensor components as well as Mössbauer parameters.
The precursor [FeIII(L)Cl] (LH2 = N,N'-bis(2'-hydroxy-3'-X-benzyliden)-1,6-diamino-3-N-hexane) is a high-spin (S = 5/2) complex (with X = -CH3, -O-CH3). This precursor is combined with the bridging unit [SnIV(CN)4] to yield star-shaped pentanuclear clusters, [(L-X-FeIII)4Sn(CN)4]Cl4 57Fe-Mössbauer, 119mSn-Mössbauer, and ESR spectroscopy are used to study our samples. For X = -CH3 the 57Fe-Mössbauer data show a multiple spin transition between iron(III) in the high-spin and low-spin state. Changing the functional group from X = -CH3 to X = -O-CH3 turns the switchability off.
In vitro cultured lung cancer cells are not suitable for animal-based breath biomarker detection
(2015)
In vitro cultured lung cancer cell lines were investigated regarding the possible identification of volatile organic compounds as potential biomarkers. Gas samples from the headspace of pure culture medium and from the cultures of human lung adenocarcinoma cell lines A549 and Lu7466 were exposed to polypropylene fleece in order to absorb odour components. Sniffer dogs were trained with loaded fleeces of both cell lines, and honey bees were trained with fleeces exposed to A549. Afterwards, their ability to distinguish between cell-free culture medium odour and lung cancer cell odour was tested. Neither bees nor dogs were able to discriminate between odours from the cancer cell cultures and the pure culture medium. Solid phase micro extraction followed by gas chromatography with mass selective detection produced profiles of volatiles from the headspace offered to the animals. The profiles from the cell lines were largely similar; distinct differences were based on the decrease of volatile culture medium components due to the cells' metabolic activity. In summary, cultured lung cancer cell lines do not produce any biomarkers recognizable by animals or gas chromatographic analysis.
The fate of doped iron species during various mechanically and thermally initiated redox reactions and aggregation processes in crystalline and amorphous AlO(OH) or Al2O3 matrices was investigated. The amorphization of the matrix was performed by chemical (i.e., via sol-gel processes) or mechanochemical treatment (high-energy ball milling). Thermal analysis, coupled with mass spectrometry (TA-MS), Mössbauer spectroscopy, and electron spin resonance (ESR), was used. The TA under various gas atmospheres allowed preparing samples under a controlled temperature regime, together with a controlled gas influence. Both the effect of mechanical activation and the influence of the iron doping could be followed macroscopically via the down-shift of the peak temperature of the corundum formation. The ESR data characterize the Fe3+ ions and their interaction with the magnetic surrounding based on the fine structure parameters. The Mössbauer data allowed the characterization of the Fe(0), Fe2+, and Fe3+ species, together with providing information about their coordinative surrounding. Both methods provided general complementary spectroscopical information.
Unexpectedly, (FeOx)n and (FexAl1-x)2O3 aggregates could also be detected in the range of low Fe concentrations. It was demonstrated that even in the low-level doped systems [(FexAl1-x)2O3 with x ≥ 0.01], all the essential spectroscopic phenomena occur. At higher Fe concentrations, they were discovered to be caused by magnetic and spin exchange interactions as well as by solid-state reactions during and after the mechanical activation.
The investigation of iron-doped AlO(OH)/Al2O3 systems revealed that the combined employment of Mössbauer and ESR spectroscopies together with thermal analysis yields meaningful data with complementary information. This mutual complementarity is based on the coexistence of Fe point defects with the corresponding aggregated FeOx species which has been observed even for very low Fe concentrations. Competing redox processes between the dopant, the AlOx matrix, and the gas atmosphere during the thermal treatment enable the generation of solid phases exhibiting specific chemical properties. The entire reaction process is influenced by a specific mechanical and thermal pre-treatment that affects predominantly oxydative processes in the matrix. A protecting influence of the matrix preventing further reductive attack of the Fe3+ Fe2+ ions by hydrogen has been established.
The mainstream magnetic iron oxide particles used as contrast media for magnetic resonance (MR) imaging are composed of a magnetic iron oxide core surrounded by a dextran or carboxydextran coat. The core size ranges from 2 nm to less than 10 nm, and the hydrodynamic diameter ranges from 20 nm to about 120 nm. The coat prevents aggregation and sedimentation of the particles in aqueous solutions, achieves high biological tolerance, and prevents toxic side effects.
Two kinds of particles are considered: (i) large particles (>30 nm), called superparamagnetic iron oxide particles (SPIOs) for liver imaging; (ii) smaller particles (<30 nm hydrodynamic diameter), called ultrasmall SPIOs (USPIOs), e.g. for MR angiography.
To characterize the particles, Mössbauer spectra are presented for the two particle ensembles. These spectra allow insight into the magnetic coupling, the valency of the iron ions and a rough estimate of the core size to be deduced. On the basis of the concentration dependence of the MR signal intensities, two applications are discussed together with two representative clinical examples.
Biofilms cause complications and high costs in both industry and medicine. Of particular interest are bacterial infections of prosthetic materials, which usually cannot be eliminated due to the high antibiotic resistance known for bacteria forming biofilms. The search for new materials and coatings with lower colonization potential and antibacterial activity is of great importance to reduce biofilm formation. However, there is no standardized procedure to examine the colonization characteristics of bacteria in the Biofilm state in situ. Here, we describe an automated epifluorescence microscopy system for the semi-quantitative analysis of three-dimensional (3D) biofilms on various surfaces. To analyze adherent bacteria, three materials (glass, steel and titanium) were incubated with bacteria in a flow chamber system. After fluorescence staining of the bacteria, automated image capturing, quantification of the bacteria, measurement of the colonized area and determination of the 3D biofilm height were carried out by using novel software.
Furthermore, the materials were examined for their surface topography using white light scanning interferometry. Titanium compared to glass showed a significantly higher number of adherent bacteria.
We argue that this was due to the higher microroughness of titanium. The colonized area was in accordance with the number of adherent bacteria and was also significantly larger on titanium coupons compared to glass. Maximum 3D biofilm height on glass coupons was significantly lower compared to the ones on steel and titanium. This novel method enables the standardized, automated investigation of the colonization with bacteria on different materials. This approach can considerably support the characterization of new material surfaces and their innovative coatings by analyzing the amount of attached Bacteria and thickness of biofilms in situ and eliminates the need of conventional cultivation.
To keep pace with the rising number of detected mycotoxins, there is a growing need for fast and reliable toxicity tests to assess the potential threat to food safety. Toxicity tests with the bacterial-feeding nematode Caenorhabditis elegans as model organism are well established. In this study the C. elegans wildtype strain N2 (var. Bristol) was used to investigate the toxic effects of the food-relevant mycotoxins citrinin (CIT) and zearalenone-14-sulfate (ZEA-14-S) and zearalenone (ZEA) on different life cycle parameters including reproduction, thermal and oxidative stress resistance and lifespan. The metabolization of the mycotoxins by the nematodes in vivo was investigated using HPLC-MS/MS. ZEA was metabolized in vivo to the reduced isomers α-zearalenol (α-ZEL) and β-ZEL. ZEA 14-S was reduced to α-/β-ZEL 14-sulfate and CIT was metabolized to mono-hydroxylated CIT. All mycotoxins tested led to a significant decrease in the number of nematode offspring produced. ZEA and CIT displayed negative effects on stress tolerance levels and for CIT an additional shortening of the mean lifespan was observed. In the case of ZEA-14-S, however, the mean lifespan was prolonged. The presented study shows the applicability of C. elegans for toxicity testing of emerging food mycotoxins for the purpose of assigning potential health threats.
Dendrimers of various generations were synthesized by the divergent method. Starting from various amine cores (G0a, G0b, G0c) the generations were built by reaction of the amine with acrylnitrile followed by hydrogenation with DIBAL-H. Treatment with salicylaldehyde creates a fivefold coordination sphere for iron in the molecular periphery. The resulting multinuclear coordination compounds are investigated by Mossbauer spectroscopy.
