Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (53)
- Beitrag zu einem Tagungsband (51)
- Zeitschriftenartikel (45)
- Beitrag zu einem Sammelband (32)
- Forschungsbericht (25)
- Sonstiges (2)
- Monografie (1)
- Posterpräsentation (1)
Sprache
- Deutsch (106)
- Englisch (103)
- Mehrsprachig (1)
Schlagworte
- VOC (44)
- Bauprodukte (27)
- Emissionen (25)
- Emission test chamber (22)
- SVOC (20)
- Geruch (19)
- Emission (10)
- GC/MS (8)
- VVOC (7)
- AgBB-Schema (6)
Organisationseinheit der BAM
Paper des Monats
- ja (1)
Eingeladener Vortrag
- nein (53)
An verschiedenen Dämmstoffen, Montageschäumen, Computersystemen und Polstermöbeln sowie einer Matratze
wurden mittels unterschiedlicher Emissionsprüfkammern und -zellen in Kombination mit geeigneten Probenahme- und
Analyseverfahren Untersuchungen zur Emission polybromierter und phosphororganischer Flammschutzmittel (FSM)
durchgeführt. Hierbei kamen Emissionsprüfkammern mit Volumina von 0,02 m3 und 1 m3 sowie 0.001 m3 -
Emissionsprüfzellen zum Einsatz. Die hier untersuchten Substanzen zählen zu den SVOC und erfordern eine
Luftprobenahme durch Adsorption an Polyurethanschaum. Die Aufarbeitung des Polyurethanschaums erfolgte mit
Ultraschallbad- bzw. Soxhletextraktion, die Extrakte wurden aufkonzentriert und mit GC/MS oder HPLC/DAD vermessen.
Die ursprünglich angestrebte Versuchsdauer von jeweils 28 Tagen musste auf mindestens 100 Tage verlängert werden,
um einen für die Messung erforderlichen Gleichgewichtszustand zu erreichen. Mit den eingesetzten Verfahren läßt sich
die Emission der phosphororganischen FSM qualitativ und quantitativ gut nachweisen, hierzu gehören insbesondere
TCPP und TPP. Ausnahmen bilden z.B. RDP und BDP, hier wird die Emissionsmessung mittels Luftprobenahme durch
den Einfluss von Senkeneffekte dominiert. Für die bromierten FSM ist eine gute Anwendbarkeit für Verbindungen mit bis
zu sechs Bromatomen gegeben. Mit zunehmendem Bromierungsgrad und zunehmender Schwerflüchtigkeit verstärkt sich
auch hier der Einfluss von Senkeneffekten und erschwert die Bestimmung der Emission. So konnte HBCD zwar auf den
Kammerwandflächen jedoch, abgesehen von Spuren, nicht in der Emissionsprüfkammerluft nachgewiesen werden. Die
Erkenntnisse reichen für eine umfassende Darstellung des Emissionsverhaltens der FSM und darauf aufbauender
Expositionsbewertungen für den Gebrauch flammgeschützter Produkte noch nicht aus. Es bestehen weiterhin
Kenntnislücken, um die z.T. hohen Gehalte an FSM z.B. in Hausstäuben erklären zu können. Gleichwohl bildet die Studie
eine wesentliche Grundlage für weiterführende Untersuchungen. In Abhängigkeit vom Produkttyp betragen die ermittelten
flächenspezifischen (SERa) Emissionsraten z.B. für TCPP zwischen 0,012 und 140 µg m-2 h-1. Nachgewiesene PBDEs
zeigten je nach Produkttyp produktspezifische Emissionsraten (SERu) zwischen 0,1 und 14,2 ng Stück-1h-1 und SERa
zwischen 0,2 und 6,6 ng m-2 h-1. Eine Ausweitung z.B. auf Langzeitmessungen, die Bestimmung des Einflusses der
Materialalterung sowie unterschiedlicher Flammschutzmittelgehalte auf die Emission, die hier mangels hinreichender
Information und entsprechenden Produkten nicht durchgeführt werden konnte, wäre wünschenswert.
The emission levels of high boiling brominated (BFR) and phosphoric (POC) flame retardants (FR) in different materials were examined. For the determination of the emission rate the tests were done in different emission test chambers and cells under standard conditions (23 C, 50% RH and fixed area specific air flow rates). Selected products, e.g. printed circuit boards, were investigated at elevated temperature (e.g. 60 C) to simulate working conditions. Applied analytical techniques for the air samples adsorbed on polyurethane foam (PUF) are soxhlet and ultrasonic extraction. Different conditions were used to analyse the FR via GC-MS. Based on the first results it could be demonstrated that the emission depends on material density and surface condition. The concentrations over time obtained for tris(3-chloropropyl)-phosphate, e.g., from emission test chamber and cell show a good correlation, partly the measured concentration are different. Sampling at elevated temperature gives higher concentrations.
The emissions of selected flame retardants were measured in 1- and 0.02-m3 emission test chambers and 0.001-m3 emission test cells. Four product groups were of interest: insulating materials, assembly foam, upholstery/mattresses, and electronics equipment. The experiments were performed under constant environmental conditions (23°C, 50% RH) using a fixed sample surface area and controlled air flow rates. Tris (2-chloro-isopropyl)phosphate (TCPP) was observed to be one of the most commonly emitted organophosphate flame retardants in polyurethane foam applications. Depending on the sample type, area-specific emission rates (SERa) of TCPP varied between 20 ng m-2 h-1 and 140 ?g m-2 h-1.
The emissions from electronic devices were measured at 60°C to simulate operating conditions. Under these conditions, unit specific emission rates (SERu) of organophosphates were determined to be 1085 ng unit-1 h-1. Increasing the temperature increased the emission of several flame retardants by up to a factor of 500. The results presented in this paper indicate that emissions of several brominated and organophosphate flame retardants are measurable. Polybrominated diphenylethers exhibited an SERa of between 0.2 and 6.6 ng m-2 h-1 and an SERu of between 0.6 and 14.2 ng unit-1 h-1. Because of sink effects, i.e., sorption to chamber components, the emission test chambers and cells used in this study have limited utility for substances low vapour pressures, especially the highly brominated compounds; hexabromocyclododecane had an SERa of between 0.1 and 29 ng m-2 h-1 and decabromodiphenylether was not detectable at all.
Various insulating boards, assembly foams, PC-systems, upholstery and a mattress were examined for possible
emissions of polybrominated and organophosphorus flame retardants. 0.02 m3- and 1m3- emission test chambers and
1Llitre cells were used to perform the investigations. The substances of interest are mainly classified as SVOC. A
sampling technique using polyurethane foam plugs and special analytical methods was developed. The PUF-plugs were
extracted by ultrasonic and soxhlet extraction and the extracts were concentrated. The analyses were performed by
GC/MS and HPLC/DAD. Chamber measurements were generally taken over 28 days, but in the case of SVOC, a test
period of a minimum of 100 days was necessary to achieve equilibrium. The determination of most of OPCs was
successful using emission test chambers. Due to sink effects the determination of low volatile OPC such as RDP and
BDP needs to be improved. Brominated flame retardants are quantifiable up to hexabrominated compounds using
emission test chambers as a reference method. The emission of lower volatile compounds, e.g. HBCD, was strongly
affected by sink effects. Emission of decaBDE was not quantifiable at all. Based on the results presented further
investigations are required for an adequate risk assessment of flame retarded products and their contribution to the
contamination of the indoor air environment. TCPP was found to be one of the most commonly used organophosphorus
flame retardants in polyurethane foam applications. Depending on the sample type 0.012 to 140 µg m-2 h-1 was obtained
for area-specific emission rates (SERa) for TCPP. PBDEs, for example, exhibited product-specific emission rates (SERu)
between 0.1 and 14.2 ng unit-1 h-1 and SERa between 0.2 and 6.6 ng m-2 h-1. More data about the emission behaviour of FR are required with special regard to substance migration, aging and long-term emission in particular.
Nicht nur Schadstoffe aus der Umwelt können Museumsexponate schädigen. Auch interne Schadstoffquellen wie objektimmanente Exhalate und Emissionen von Lösemitteln oder organischen Säuren können den wertvollen Gu¨tern Schaden zufu¨gen. Auf Schadstoffe zu pru¨fen sowie geeignete Messmethoden zu entwickeln und zu optimieren, ist daher von großer Bedeutung. Neuste Forschungen stellen die Autoren vor.
Moderne Vitrinen sollen gleichzeitig eine hohe Dichtigkeit und die Abwesenheit jeglicher Fremdstoffe in den Vitrinen gewährleisten. Diese Anforderungen sind zeitgleich kaum erfüllbar, da es emissionsfreie Materialien (vor allem Kleb- und Beschichtungsstoffe) nicht gibt. Um die potentiellen Emissionen zu minimieren wurde ein Messverfahren entwickelt, welches inzwischen als BEMMA-Schema (Bewertung von Emissionen aus Materialien für Museumsausstattungen) in die Museumswelt Einzug genommen hat.
Die erfolgreiche Bewertung der für den Bau verwendeten Materialien gemäß BEMMA-Schema resultiert nicht in einer emissionsfreien Vitrine, sondern soll bei der Auswahl geeigneter Materialien zur Herstellung möglichst emissionsarmer Vitrinen helfen. Konkrete handwerkliche Durchführungen beim Bau, Dichtheits¬anforderungen, wie auch die Aufstellbedingungen (Umgebung der Vitrine) beeinflussen die Emissionscharakteristik der fertigen Vitrine in der Praxis. Eine saubere Vitrine hilft nichts in einer belasteten Umgebung oder auch bei emittierenden Exponaten. Inzwischen liegen Erfahrungen mit dem Schema seit 2012 vor.
Der Messablauf sieht vor, dass von den Materialien kleine Muster mit der Mikrokammer (Markes) innerhalb von 2 Tagen untersucht werden. Dabei wird mit Silikagelkartuschen auf Ameisen- und Essigsäure, mit DNPH auf Aldehyde und Ketone und mit Tenax® sowohl auf VOC als auch für die spezifische Oxim-Analytik die Abluft der Mikrokammern untersucht. Die Bewertungskriterien basieren auf den Ergebnissen einer Vorstudie mit ca. 150 verschiedenen Produkten im Zeitraum 2010 bis 2012.
Vor dem Hintergrund der anhaltenden öffentlichen Diskussion um mögliche gesundheitliche Risiken von Ultrafein- und Feinstaubemissionen aus Bürogeräten mit Laserdruckfunktion (LPD, Laser Printing Device) wurde vom Umweltbundesamt ein Forschungsvorhaben zur Entwicklung einer Prüfprozedur für die Quantifizierung der emittierten Partikel durch Zählung unter Standardbedingungen in Emissionsmesskammern, sowie zur physikalischen und chemischen Charakterisierung dieser Aerosole initiiert. Als Ergebnis konnte die Partikelzählung in den Entwurf des Prüfverfahrens für die Bestimmung von Emissionen (RAL-UZ-122, Anhang S-M) des Umweltzeichens "Blauer Engel" für Bürogeräte sowie in den Prüfstandards ECMA-328 und den Entwurf der ISO/IEC 28360 integriert werden. Die Methode wurde in einem internationalen Ringversuch erfolgreich getestet. Auf dieser Basis können Vergabekriterien und -werte für die Emission von Fein- und Ultrafeinpartikeln im Rahmen der Vergabe des Umweltzeichens Blauer Engel vereinbart und Produktprüfungen vorgenommen werden.
Do particleboards produced with recycled wood contribute to indoor air pollution with biocides?
(2003)
The present study comprises the characterisation of museum show cases concerning their hazardous potential for
art objects. In order to estimate potential risks of damage the emission of volatile organic compounds coming from
several construction materials is monitored and different air exchange rates from exhibit cases are determined. For
the determination of the VOCs different methods were applied. The first step is a direct thermal extraction of the
materials followed by emission test chamber measurements. The tracer gas method with N2O that is used in this study is a convenient procedure to investigate air exchange rates under working conditions greater than 0.05 d-1. The results of this study confirm the importance of the careful choice concerning building materials for show cases. Furthermore the analyses clarify that certain organic compounds might be a problem for the exhibits in show cases with low air exchange rates.
Schadstoffe beschäftigen derzeit Museen weltweit Heute weiß man, dass diese auch aus Materialien, die für den Ausstellungsbau verwendet werden, austreten können, was eine Gefahr für Exponate darstellt. Ein neues Verfahren namens BEMMA bietet nun erstmalig die Möglichkeit, relativ schnell und effektiv eine problemorientierte Untersuchung und Bewertung mit belastbaren und reproduzierbaren Ergebnissen vorzunehmen.
In this work, the elemental composition of fine and ultrafine particles emitted by ten different laser printing devices (LPD) is examined. The particle number concentration time series was measured as well as the particle size distributions. In parallel, emitted particles were size-selectively sampled with a cascade impactor and subsequently analyzed by the means of XRF. In order to identify potential sources for the aerosol's elemental composition, materials involved in the printing process such as toner, paper, and structural components of the printer were also analyzed. While the majority of particle emissions from laser printers are known to consist of recondensated semi volatile organic compounds, elemental analysis identifies Si, S, Cl, Ca, Ti, Cr, and Fe as well as traces of Ni and Zn in different size fractions of the aerosols. These elements can mainly be assigned to contributions from toner and paper. The detection of elements that are likely to be present in inorganic compounds is in good agreement with the measurement of nonvolatile particles. Quantitative measurements of solid particles at 400 °C resulted in residues of 1.6 × 109 and 1.5 × 1010 particles per print job, representing fractions of 0.2% and 1.9% of the total number of emitted particles at room temperature. In combination with the XRF results it is concluded that solid inorganic particles contribute to LPD emissions in measurable quantities. Furthermore, for the first time Br was detected in significant concentrations in the aerosol emitted from two LPD. The analysis of several possible sources identified the plastic housings of the fuser units as main sources due to substantial Br concentrations related to brominated flame retardants.
Several construction and building materials, including wood, glue and coatings, are possible sources of very volatile organic compounds (VVOCs) and volatile organic compounds (VOCs) like formic and acetic acid. Due to very high air tightness and very low air exchange rates in new buildings concentrations of these harmful substances can increase considerably. To minimize the risk, emissions from building products should be identified and quantified. With the common standard method, this means Tenax® sampling followed by thermal desorption and GC-MS analysis, these acids could not be detected sufficiently. The aim oft this study is the comparison of two different methods for the determination of acetic and formic acid. The sampling of method one, which is usually used for identification and quantification of VOCs, is done in accordance with ISO 16000-6 and ISO 16017-1 on Carbotrap® 202 multi-bed thermal desorption tube by subsequent identification and quantification with GC-MS. Method two is based on sampling on 2,4-dinitrophenylhydrazine (DNPH) cartridges, derivatisation, elution, identification and quantification of the derivatives with LC-MS/MS (liquid chromatography mass spectrometry/mass spectrometry).
Ausstellungskuratoren, Restauratoren oder Fachplaner stehen immer wieder vor der Entscheidung, geeignete Materialien für Museumsausstattungen auswählen zu müssen. Vitrinen, Depoteinrichtungen, aber auch Transportverpackungen für Kunst- und Kulturgut sollten unbedingt frei von Schadstoffen sein. Ein neues Verfahren ermöglicht nun eine problemorientierte Untersuchung und Bewertung von Materialien mit belastbaren und reproduzierbaren Ergebnissen.
Entwicklung einer umweltverträglichen Holzklebetechnik durch den Einsatz von Proteinbindemitteln
(2003)
In accordance with the Directive 2003/11/EC amending the Council Directive 76/769/EEC for the 24th time, pentabromo
and octabromo diphenylethers may not be used or put on the market in concentrations higher than 0.1 % by mass.
To verify this threshold value a standard measurement method for the determination of selected pentabromo
diphenylethers (pentaBDE-isomers) and octabromo diphenylethers (octaBDE-isomers) in polymers based on gas
chromatography mass spectrometry (GC/MS) was developed. The following target compounds were selected for the investigations: BDE85 (2,2,3,4,4-pentaBDE), BDE99 (2,2,4,4,5- pentaBDE), BDE100 (2,2,4,4,6-pentaBDE), BDE203 (2,2,3,4,4,5,5,6-octaBDE), BDE196 (2,2,3,3,4,4,5,6-octaBDE), BDE197 (2,2,3,3,4,4,6,6-OctaBDE). The following reference materials were prepared: polyurethane (PUR-H) and epoxy resin (EP) containing 0.1 % by mass of sum of pentaBDE isomers, polystyrene (PS) and acrylnitril-butadiene-styrenecopolymer (ABS) containing 0.1 % by weight of sum of octaBDE isomers. For quality assurance of the standard measurement method an interlaboratory comparison was conducted between 1 June and 30 November 2004 where 18 participants were involved. Data assessment was performed in accordance with DIN ISO 5725-2:2002-12 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic methods for the determination of repeatability and reproducibility of a standard measurement method. The following general mean values and standard deviations were obtained: 1.09 ± 0.16 mg g-1 (15 %) (sum pentaBDE isomers/EP), 1.3 ± 0.19 mg g-1 (15 %) (sum pentaBDE isomers/PUR-H), 0.99 ± 0.27 mg g-1 (27 %) (sum octaBDE isomers/PS), 0.42 ± 0.11 mg g-1 (26 %) (sum octaBDE isomers/ABS). The reproducibility standard deviation sRj and repeatability standard deviation srj were calculated as statistical parameters. The repeatability of the sum of pentaBDE isomers in EP was srj= 0.044 mg g-1 (4.0 %) and the reproducibility was sRj = 0.167 mg g-1 (15 %). srj and the sRj were 0.038 mg g-1 (2.9 %) and 0.195 mg g-1 (15 %), respectively, for the sum of pentaBDE isomers in PUR-H. For the sum of octaBDE isomers in ABS srj and sRj were determined to 0.029 mg g-1 (6.9 %) and 0.114 mg g-1 (27 %), respectively. For the sum of octaBDE isomers in PS the srj = 0.043 mg g-1 (4.3 %) and sRj = 0.255 mg g-1 (26 %) were obtained.
Im Rahmen der Richtlinie 2003/11/EG zur 24. Änderung der Richtlinie 76/769/EWG wurde ein Grenzwert von 0,1 Gewichts-% für penta- und octabromierte Diphenylether in Erzeugnissen festgelegt. Zur Überprüfung dieses Grenzwertes wurde ein Standardanalyseverfahren zur quantitativen Bestimmung von ausgewählten Pentabromdiphenylethern (PentaBDE-Isomere) und Octabromdiphenylethern (OctaBDE-Isomere) in Polymeren mit Hilfe der Gaschromatographie-Massenspektrometrie (GC/MS) entwickelt. Zur Verfahrensentwicklung wurden folgende Isomere ausgewählt: BDE85 (2,2,3,4,4-PentaBDE), BDE99 (2,2,4,4,5- PentaBDE), BDE100 (2,2,4,4,6-PentaBDE), BDE203 (2,2,3,4,4,5,5,6-OctaBDE), BDE196 (2,2,3,3,4,4,5,6-OctaBDE) und BDE197 (2,2,3,3,4,4,6,6-OctaBDE). Vorbereitend wurden folgende Modellpolymere hergestellt: Polyurethan (PUR-H) mit 0,1 Gew.-% Summe PentaBDEIsomere, Epoxidharz (EP) mit 0,1 Gew.-% Summe PentaBDE-Isomere, Polystyrol (PS) und Acrylnitril-Butadien-Styrol- Copolymer (ABS) mit jeweils 0,1 Gew.-% Summe OctaBDE-Isomere. Im Rahmen des Projektes wurde ein Ringversuch mit 18 Teilnehmern durchgeführt, bei dem die genannten Polymere dem Standardanalyseverfahren unterzogen wurden. Der Ringversuch wurde zwischen dem 01. Juni und 30. November 2004 veranstaltet. Die Datenauswertung erfolgte in Anlehnung an DIN ISO 5725-2:2002-12 Genauigkeit (Richtigkeit und Präzision) von Messverfahren und Messergebnissen, Teil 2: Grundlegende Methode für die Ermittlung der Wiederhol- und
Vergleichpräzision eines vereinheitlichten Messverfahrens. Folgende Mittelwerte der Ermittlungsergebnisse sowie
Standardabweichungen wurden bestimmt: 1,09 ± 0,16 mg g-1 (15 %) (Summe PentaBDE-Isomere/EP), 1,3 ± 0,19 mg g-1 (15 %) (Summe PentaBDE-Isomere/PUR-H), 0,99 ± 0,27 mg g-1 (27 %) (Summe OctaBDEIsomere/PS), 0,42 ± 0,11 mg g-1 (26 %) (Summe OctaBDE-Isomere/ABS). Als statistische Kennzahlen für das Standardanalyseverfahren wurde folgende Parameter ermittelt: Für PentaBDE-Isomere in EP wurde eine Wiederholstandardabweichung von srj = 0,044 mg g-1 (4,0 %) und eine Vergleichstandardabweichung sRj = 0,167 mg g-1 (15 %) bestimmt. Für PentaBDE-Isomere in PUR-H ergab sich für srj = 0,038 mg g-1 (2,9 %) und sRj = 0,195 mg g-1 (15 %). Für OctaBDE-Isomere in ABS ergab sich für srj = 0,029 mg g-1 (6,9 %) und sRj = 0,114 mg g-1 (27 %) und für OctaBDE-Isomere in PS srj = 0,043 mg g-1 (4,3 %) und sRj = 0,255 mg g-1 (26 %).
Emissions from Materials
(2006)
Methods for the determination of biocide emissions from treated materials into water and air were developed and tested in order to support a comparative ecological assessment of biocidal products. Leaching tests, experiments with simulated rain, extraction cleaning of carpets and emission chamber tests were performed with a series of treated materials. The experiments focused on the effect of changes in the procedure as well as characteristics of the specimens and demonstrate the suitability of the proposed methods for biocides of different product types.
It was demonstrated that emissions of biocides into water can be compared on the basis of leaching tests in which the emission kinetics of the active ingredients are recorded. However, the water volume per surface area and the timetable for water changes have to be defined in such tests. Functions of flux rates related to time can be well described for inorganic compounds, whereas modelling of the data is more complicated for organic substances.
Emission chamber tests using 20-litre and 23-litre glass exsiccators, originally developed to study volatile organic compounds, were successfully adapted for the investigation of the emission of biocides from treated materials which are usually semi volatile organic compounds. However, test parameters and the method of analysis have to be adapted to the substances to be determined.
Generally, it was found that the emission curves for the semi volatile organic compounds investigated differ from those of volatile organic compounds.
Kurzfassung An neun verschiedenen Hardcopygeräten wurden in unterschiedlichen Emissionsmesskammern (zwei verschiedene 1 m³ - Kammern und eine 20 m³ - Kammer) in Kombination mit geeigneten Probenahme- und Analysenverfahren Untersuchungen zum Emissionsverhalten dieser Geräte hinsichtlich Staub, Ozon und VOC (TVOC) durchgeführt. Luftprobenahme und Analytik erfolgten für VOC mittels Tenax TA und anschließender Thermodesorption (TDS) in Verbindung mit GC / MS. Ozon wurde kontinuierlich bestimmt. Der Ozonanalysator arbeitete auf der Grundlage der flammenlosen Reaktion von Ozon mit Ethylen nach dem Prinzip der Chemilumineszenz. Die Staubbestimmung erfolgte gravimetrisch mittels Glasfaserfilter und Ultramikrowaage. Zusätzlich wurde die Partikelemission während des Druckbetriebes mit einem Partikelzähler bestimmt. Aufgrund der technischen Rahmenbedingungen standen nur kurze Druckzeiten von maximal 36 Minuten zur Verfügung. Um die Gleichgewichtskonzentration in der Prüfkammer zu erreichen, wurde die Luftaustauschrate in den 1 m³ - Kammern auf n = 4,0 bis 4,7 pro Stunde erhöht. Zusätzlich zur Prüfung in den Emissionsmesskammern sind verschiedene Papiere mittels Direkt - TDS sowie unter- schiedliche Toner mittels Headspaceprobenahme in Kombination mit GC / MS hinsichtlich ihres Emissionsverhaltens untersucht worden.
Für die untersuchten Geräte wurden Emissionsraten ermittelt. Sie betrugen für TVOC 0,41 bis 22,4 mg pro Stück und Stunde, für Ozon kleiner 0,02 bis 4,6 mg pro Stück und Stunde sowie für Staub 0,10 bis 7,63 mg pro Stück und Stunde. Verglichen mit Frischfaserpapier wurden bei den Untersuchungen mit Recyclingpapier deutlich höhere SVOC - Konzentrationen nachgewiesen. Im Ergebnis der Untersuchungen wurde ein Prüfverfahren entwickelt, das die Basis für Emissionsmessungen im Rahmen der Umweltzeichen RAL UZ 62, RAL UZ 85 sowie des neuen RAL UZ 114 für Multifunktionsgeräte darstellt. Abstract The emission behaviour with regard to dust, ozone and VOC (TVOC) of nine different hardcopy devices in combination with suitable air sampling and analysis procedures was investigated in different emission test chambers (two different 1 m³ - chambers and one 20 m³ - chamber). Air sampling and analysis for VOC were done by means of Tenax TA and subsequent thermal desorption (TDS) in connection with GC / MS. Ozone was determined continuously. The ozone analyser worked on the basis of the flame rid reaction of ozone with ethylene according to the principle of chemiluminescence. The dust determination was done gravimetrically by means of glass fibre filter and an ultra micro - balance. Additional the particle emission during the printing process was measured with a particle counter. The general technical conditions of the tested hardcopy devices were the reason for short printing times with a maximum of 36 minutes. In order to achieve the equilibrium concentration in the test chambers the air exchange rate in the 1 m³ - test chambers had to be increased to a value of n = 4,0 to 4,7 per hour. Additional to the examination of the hardcopy devices in the emission test chambers different papers were investi- gated by means of direct - TDS and different toners were tested by means of head space sampling in combination with GC / MS. For the examined hardcopy devices emission rates were determined. The emission rates for TVOC ranged from 0,41 to 22,4 mg per piece and hour, for ozone from less than 0,02 to 4,6 mg per piece and hour and for dust from 0,10 to 7,63 mg per piece and hour. The comparison between recycling paper and paper produced from primary fibres showed in general higher SVOC emissions from recycling paper. As the result of the investigations a test method for the determination of emissions from hardcopy devices was developed. This test method is the basis for emission tests in the framework of the German Award of the Environmental Label for office devices RAL -UZ 62, RAL -UZ 85 and the new RAL -UZ 114 for multifunctional devices.
Beschichtete Holzwerkstoffe und daraus hergestellte Produkte, wie z.B. Möbel, sind in nahezu jedem Innenraum mit vergleichsweise großen Oberflächen anzutreffen. Vor dem Hintergrund einer Vielzahl von in Innenräumen verwendeten unterschiedlichen Materialien und Produkten und dem Ziel, die Belastung der Innenraumluft mit flüchtigen organischen
Verbindungen möglichst gering zu halten, ist eine weitgehende Minimierung von Emissionen dieser Verbindungen aus den genannten möglichen Quellen notwendig. Zu diesem Zweck, auch im Hinblick auf die Umsetzung der Konzeption der Bundesregierung zur Verbesserung der Luftqualität in Innenräumen wurde das bestehende deutsche Umweltzeichen RAL-UZ 38 (Blauer Engel) Formaldehydarme Produkte aus Holz und Holzwerkstoffen überarbeitet. Für das Ziel einer Erweiterung von der Einzelverbindung Formaldehyd auf ein breites Spektrum an flüchtigen organischen Verbindungen war ein geeignetes Prüfverfahren als Basis der neuen Umweltzeichen-Vergabegrundlage zu entwickeln. Die Ergebnisse der hierfür durchgeführten Untersuchungen können dem Abschlußbericht entnommen werden.
Background to the studies was the revision of the current selection criteria of the German ecolabel Blauer Engel (Blue angel) for copiers and printers. In the requirements limits were set for ozone, dust and styrene emissions. The former test methods did no longer correspond to todays requirements with regard to emission measurements. In addition, the emission behaviour of hardcopy devices due to the use of different and non-com parable test methods has been recently discussed controversely. For this reason a new test method had to be developed which enables a reliable, reproducible determination of emission rates (ER) for dust, ozone and VOC (volatile organic compounds). The basis for this was the ECMA-Standard 328 compiled by ECMA (European Computer Manufacturer Association) using dynamic chamber measurements. Nine different machines, desktop laser printers as well as office devices like bigger copiers and multifunctional devices were investigated. As a result of the study new criteria for the Blauer Engel for copiers, printers and a new created for multifunctional devices, concerning TVOC, ozone and dust emission were determined. Additionally a model is presented calculating the concentrations in real rooms under usual printing conditions derived from the test chamber results.
The development of a gas mixing system (GMS) that enables dynamic and retraceable production of stable long-term VOC gas mixtures within the ppb range is discussed. In this system pure liquid substances are kept separately at a constant temperature, evaporated according to their vapour pressure and removed by a small inert gas flow. A modular set-up allows flexible handling. All vapours generated are finally united in a mixing chamber. Any concentration level of the gas mixture can be produced by a suitable combination of evaporation temperature, carrier and dilution gas flows. Test results from continuous operation over six weeks are presented. The equipment was tested on seven volatile organic compounds (VOC) of different vapour pressure ranges. It was possible to establish stable operation for the equipment during the entire period and reproducible gas concentrations which were traceable to the mass as an SI unit, thus the system is suitable for long-term tests.---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Im Beitrag wird die Entwicklung eines Gasmischsystems (GMS) beschrieben, das die dynamische und rückführbare Generierung von langzeitstabilen VOC-Gasgemischen im ppb-Bereich erlaubt. Dabei werden Reinsubstanzen separat temperiert, ihrem Dampfdruck entsprechend verdampft und durch einen kleinen Inertgasstrom abgeführt. In einer Mischkammer werden sie schließlich zusammengeführt. Durch die Kombination von Verdampfungstemperatur, Träger- und Verdünnungsgasflüssen ist die Einstellung eines beliebigen Konzentrationsniveaus des Gasgemischs möglich. Aus einem Dauerbetrieb von sechs Wochen werden Untersuchungsergebnisse gezeigt. Dabei wurde die Apparatur mit insgesamt sieben flüchtigen organischen Verbindungen (VOC) unterschiedlicher Dampfdruckbereiche betrieben. Die Anlage lief über den gesamten Zeitraum stabil und lieferte reproduzierbare und auf die Masse als SI-Einheit rückführbare Gaskonzentrationen. Somit ist das Verfahren für Langzeitanwendungen geeignet.
When utilized in the perfuming of children's toys, fragrances capable of inducing contact allergy in human skin may also become bioavailable to children via the inhalation route. The aim of this study was to determine the area-specific emission rates of 24 fragrances from a plasticized PVC reference material that was meant to mimic a real plastic toy. This material was introduced into an emission chamber for 28 days at handling conditions or at worst-case conditions. As a result, fragrances can be separated into three categories according to their emission rates ranging from 0.0041 to 16.2 mg/m² × h, i.e., highly volatile, semivolatile, and low-volatile compounds. Compounds of the first and second categories were monitored with decreasing emission rates. Substances of the third category were detected with increasing emission rates over time. Further, higher temperatures led to higher emission rates. The emission concentration of fragrances from four real scented toys varied between 1.10 and 107 µg/m³ at day 1 in the test chamber. Therefore, short-term inhalation exposure to fragrances originating from toys was in the range of 0.53–2700 ng/kg BW/d for the children of age 1 and older. Long-term exposure to these fragrances was calculated in the range of 2.2–220 ng/kg BW/d.
In this study 50 construction products were tested in emission test chambers according to the requirements of the AgBB-scheme: 7 acrylic and 6 silicone sealants, 6 paste-like synthetic resin plasters, 13 wood based products, 4 adhesives, 5 lacquers, 6 wall paints and 3 further construction products. VOC and odour emissions were tested on the 1st, 3rd, 10th, and 28th day. In addition to the VOC-measurements, a test procedure was developed to evaluate odour emission of construction products.This test is planned to be implemented into the AgBB-Scheme. A direct evaluation by a sensory panel in the emission test chamber was not possible. So the odour samples were collected in 300- litre tedlar bags which were evaluated later. Odour intensity of the samples was compared with different acetone concentrations. Within this study an interlaboratory comparison was conducted using the newly developed odour test method. Additionally, VVOC emissions, detection of carcinogenic compounds, repeatability of emission test chamber tests, and other issues are presented. This project has shown that construction products can be evaluated in accordance with the AgBB scheme. A sensory evaluation is intended to be introduced in the AgBB scheme. A method for this evaluation is described in this study. The test procedure should be enhanced and validated for practical utilisation.
Innenraumluftschadstoffe
(2002)
Vor dem Hintergrund der notwendigen Revision der Kriterien zur Vergabe des Gütezeichens "Blauer Engel" für Laserdrucker, Kopierer und Multifunktionsgeräte mussten auch die Prüfmethoden angepasst werden, da die alten Verfahren nicht mehr die heutigen Anforderungen der Emissionsmessung erfüllen. In diesem Zusammenhang wurde auch das unterschiedliche Emissionsverhalten von Hardcopy-Geräten auf Grund der verschiedenen und nicht miteinander vergleichbaren Prüfverfahren heftig diskutiert. Aus diesen Gründen wurde ein neues Prüfverfahren entwickelt, mit dem eine verlässliche und reproduzierbare Prüfung der Emissionsraten von Staub, Ozon und flüchtiger organischer Verbindungen auf der Basis des ECMA (European Computer Manufacturer Association) Standards 328 möglich ist. Dazu wurden neun verschiedene Geräte unter verschiedenen Bedingungen untersucht. Als ein Ergebnis dieser Studie wurden neue Kriterien zur Vergabe des "Blauen Engels" für Kopierer, Drucker und Multifunktionsgeräte festgelegt.
Die Analytik von Phthalaten (DMP bis DEHP) in der Luft ist mit thermischer Desorption unter Verwendung von Quarzwolle als Adsorbens erfolgreich realisierbar. Dies wurde durch eine Methodenvalidierung bestätigt. Es wurden sowohl Messungen im Innenraum als auch in Emissionskammern vorgenommen. In den Emissionskammermessungen wurden mögliche Senkeneffekte der Kammeroberfläche (Glas) untersucht. Unter Zuhilfenahme der idealen Abklingkurve wird bestätigt, dass diese Oberfläche eine Senke darstellt.
Emissions from Sealants
(2010)
Entwicklung einer praxisnahen Prüfmethode zur Bestimmung der Radon-Exhalation aus Bauprodukten
(2012)
Determination of radon exhalation rates from construction materials using VOC emission test chambers
(2013)
Determination of radon exhalation from construction materials using VOC emission test chambers
(2013)
The inhalation of 222Rn (radon) decay products is one of the most important reasons for lung cancer after smoking. Stony building materials are an important source of indoor radon. This article describes the determination of the exhalation rate of stony construction materials by the use of commercially available measuring devices in combination with VOC emission test chambers. Five materials – two types of clay brick, clinker brick, light-weight concrete brick, and honeycomb brick – generally used for wall constructions were used for the experiments. Their contribution to real room concentrations was estimated by applying room model parameters given in ISO 16000-9, RP 112, and AgBB. This knowledge can be relevant, if for instance indoor radon concentration is limited by law. The test set-up used here is well suited for application in test laboratories dealing with VOC emission testing.
Most VVOC were rarely considered in the evaluation of construction products. (Salthammer, 2014) In Germany this will change because the latest version of the German AgBB scheme for health evaluation (2015) now include VVOC, e.g. ethyl acetate and ethanol. In this study selected compounds were tested with the procedure described in ISO 16017 and a method for measuring VVOC with thermal desorption was developed.
Three different adsorbents Tenax TA, Carbograph 5TD and Carbopack X were tested to analyse VVOC according to ISO 16017. For the tested VVOC, Carbograph 5TD showed the best results under the chosen analytical conditions.
Vielzahl unterschiedlicher VOC kann aus Bauprodukten freigesetzt werden. In den meisten Bauproduktgruppen gibt es sowohl emissionsarme als auch emissionsreiche Produkte. Manche VOC sind produktgruppenspezifisch, z.B. Siloxane/Silikon, andere VOC unspezifisch wie Formaldehyd und Essigsäure. VOC-Analytik und Gerüche zeigen im Allgemeinen keinen Zusammenhang. Schwerflüchter zeigen Langzeitemission und ausgeprägte Senken-/Memoryeffekte. Drucker/Kopierer emittieren neben VOC auch Fein- und Ultrafeinpartikel. Radon kann aus manchen Bauprodukten abgegeben werden und bei luftdichten Gebäuden in radonarmen Gebieten Haupt-Radonquelle sein. Radonexhalation kann grundsätzlich (statisch/dynamisch?) mit VOC-Kammern - ergänzt mit geeigneten Messgeräten - bestimmt werden. Es existiert eine Vielzahl von Labels für emissionsarme Bauprodukte. Gerade bei modernen, dichten Bauten mit geringem natürlichen Luftwechsel sind hohe Schadstoffkonzentrationen zu erwarten, wenn nicht emissionsarme Materialien und Produkte zum Einsatz kommen.
Odours might cause offensive nuisance and are under suspicion to be directly harmful to health. Surprisingly their assessment is by definition no part of the determination of indoor air quality (yet). As odours emit from building materials as well as from common consumer goods the users awareness increases continuously and demand for improved consumer protection raises. In comparison to well established methods for the determination of volatile organic compounds (VOC) in the air, there is little experience regarding the applicability, comparability and reproducibility of odour measurements. Considering this, the international and the German standardisation take into account odour assessment, e.g. ISO 16000-28 and VDI 4302-1.
In Germany the AgBB-Scheme is a mandatory tool for the evaluation of building products and it is intended to implement odour measurement into it. Initially and essentially the newly developed method had to be put to test involving institutes that deal with VOC measurements. To test the applicability of the method an interlaboratory test was conducted. The results and identified potential improvements are presented in this study (Brosig, 2013).
Die meisten organischen Biozide gehören zu der Gruppe der schwerflüchtigen organischen Verbindungen (SVOC – semi volatile organic compounds). Zu den klassischen Bioziden zählen u.a. Lindan, Pentachlorphenol (PCP) und Dichlordiphenyltrichlorethan (DDT) und zu den neueren u.a. Dichlofluanid, Tebuconazol und Permethrin. Biozide kamen in Museen vor allem in den 50er und 60er Jahren zum Schutz der Exponate zum Einsatz, hauptsächlich in Depoträumen zum akuten und zum präventiven Schutz vor Schadorganismen.
With a gas mixing system (GMS) developed in our laboratory we created a gas mixture of
four substances. Adsorptive wall materials of four different compositions were exposed to this
gas mixture, consisting of 1-pentanol, hexanal, butyl acetate and n-decane. Aim of this study
was to scrutinize the ability of these samples to reduce the concentration of the supplied gas.
This capacity is expressed in the sorption flux F or area specific adsorption rate respectively.
The test was performed referring to a draft of ISO 16000-24.