Filtern
Dokumenttyp
Referierte Publikation
- ja (4) (entfernen)
Schlagworte
- Bottom ash (BA) (1)
- Cadmium (1)
- Exergie (1)
- Ferrous metals (1)
- Flotation (1)
- Hausmüllverbrennungsasche (1)
- Hydrometallurgie (1)
- Kumulierter Exergieaufwand (1)
- Mineral aggregates (1)
- Municipal solid waste incineration (MSWI) (1)
Raw material supply is essential for all industrial activities. The use of secondary raw material gains more importance since ore grade in primary production is decreasing. Meanwhile urban stock contains considerable amounts of various elements. Photovoltaic (PV) generating systems are part of the urban stock and recycling technologies for PV thin film modules with CdTe as semiconductor are needed because cadmium could cause hazardous environmental impact and tellurium is a scarce element where future supply might be constrained. The paper describes a sequence of mechanical processing techniques for end-of-life PV thin film modules consisting of sandblasting and flotation. Separation of the semiconductor material from the glass surface was possible, however, enrichment and yield of valuables in the flotation step were non-satisfying. Nevertheless, recovery of valuable metals from urban stock is a viable method for the extension of the availability of limited natural resources.
Für die Herstellung von Kupfer aus Primär- und Sekundärressourcen wurde eine Exergieanalyse der Aufbereitungs- und Gewinnungsverfahren durchgeführt. Für die Stoffgemische Kupfererz, Kupferkonzentrat und Hausmüllverbrennungsasche wurden die Exergien tabellarisch berechnet. Die Exergieaufwände der technischen Prozesse zur Kupferherstellung wurden mit den thermodynamisch minimal notwendigen Aufwänden verglichen. Die Nutzung von Sekundärrohstoffen aus Abfällen ist über weite Bereiche vorteilhaft, insb. wenn das Kupfer bereits in der metallischen Form vorliegt.
The industrial sector of bottom ash (BA) treatment from municipal solid waste incineration (MSWI) in Germany is currently changing. In order to increase the recovery rates of metals or to achieve a higher quality of mineral aggregates derived from BA, new procedures have been either implemented to existing plants or completely new treatment plants have been built recently. Three treatment trains, which are designated as entire sequences of selected processing techniques of BA, are introduced and compared. One treatment train is mainly characterized by usage of a high speed rotation accelerator whereas another is operating completely without crushing. In the third treatment train the BA is processed wet directly after incineration. The consequences for recovered metal fractions and the constitution of remaining mineral aggregates are discussed in the context of legislative and economical frameworks. Today the recycling or disposal options of mineral residues still have a high influence on the configuration and the operation mode of the treatment trains of BA despite of the high value of recovered metals.
Bottom ash from municipal solid waste incineration (MSWI) consists of elemental metals in considerable amounts. The exergy of bottom ash was calculated to be some 100 kJ/mol, mainly as a result of the presence of elemental Fe and Al. From this it can be shown that the recovery of elemental metals Cu, Al and Fe is beneficial. The fine fraction <4 mm additionally contains chemically bound metals (oxides, carbonates, silicates). Separation prospects with techniques as in ore processing (flotation, density separation, bioleaching, hydrothermal solution) are discussed. Although the concentration of Cu compounds in bottom ash is in the range of today’s exploited ores the economic viability of the recovery of metal compounds is uncertain. For sufficient enrichment different concerted treatment steps are required.