Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (28)
- Vortrag (15)
- Zeitschriftenartikel (3)
- Posterpräsentation (2)
Schlagworte
- Aging (7)
- Numerical analysis (7)
- Simulation (6)
- Elastomeric seals (5)
- Low temperature behavior (4)
- Numerische Analyse (4)
- Testing (4)
- Time dependent effects (4)
- Bruchmechanik (3)
- Compression set (3)
- Drop test (3)
- Elastomer (3)
- Explicit dynamics (3)
- Final repository Konrad (3)
- IAEA (3)
- IAEA puncture drop test (3)
- Leakage (3)
- Mechanische Bewertung (3)
- Numerical simulation (3)
- Radioaktives Material (3)
- Safety assessment (3)
- Target (3)
- 1-m-punch-bar-drop-test (2)
- Ageing (2)
- Aufprallfundament (2)
- Bar length (2)
- Behälterdesign (2)
- Cask accident scenario (2)
- Coefficient of Friction (2)
- Compression stress relaxation (2)
- Container design (2)
- Cylindrical cask (2)
- Ductile iron (2)
- Duktiles Gusseisen (2)
- Dynamic loading conditions (2)
- Dynamische Belastungsbedingungen (2)
- Elastomers (2)
- Endlager Konrad (2)
- Experiment (2)
- Fallprüfung (2)
- Finite element analysis (2)
- Fracture mechanics (2)
- Interim storage (2)
- Leakage Rate (2)
- Length of puncture bar (2)
- Mechanical assessment (2)
- Numerical Simulation (2)
- Numerical approach (2)
- Puncture bar test (2)
- Radioactive Waste (2)
- Seal Behavior (2)
- Sicherheitstechnische Bewertung (2)
- Tightness (2)
- Transport of radioactive materials (2)
- Verification (2)
- 1-m-Fallprüfung (1)
- Compression Set (1)
- Concrete behavior (1)
- Ductile cast iron cask (1)
- Dynamic loads (1)
- EPDM (1)
- Elastomer seals (1)
- Extended interim storage (1)
- FE mesh refinement (1)
- Finite element model (1)
- Glass-rubber transition (1)
- IAEO (1)
- Impact limiter (1)
- Irradiation (1)
- KONRAD (1)
- KONRAD acceptance criteria (1)
- Material model (1)
- O-ring (1)
- Package (1)
- Package assessment (1)
- Packaging (1)
- Polyurethane foam (1)
- Puncture drop test (1)
- Rapid partial release (1)
- Referenzprüfstandfundament (1)
- Scaled model (1)
- Sequential analysis (1)
- Stahldorn (1)
- Static loads (1)
- Storage and transportation casks (1)
- Strain rate (1)
- Structural analysis (1)
- Temperature dependency (1)
- Testing program (1)
- Typ B(U)-Verpackung (1)
- Validation (1)
- Verifizierung (1)
- stress relaxation (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (15)
Transport casks for radioactive materials have to withstand the 9 m drop test, 1 m puncture drop test and dynamic crush test with regard to the mechanical requirements according to the IAEA regulations. The safety assessment of the package can be carried out on the basis of experimental investigations with prototypes or models of appropriate scale, calculations, by reference to previous satisfactory safety demonstrations of a sufficiently similar nature or a combination of these methods. Computational methods are increasingly used for the assessment of mechanical test scenarios. However, it must be guaranteed that the calculation methods provide reliable results. Important quality assurance measures at BAM are given concerning the preparation, run and evaluation of a numerical analysis with reference to the appropriate guidelines.
Hence, a successful application of the finite element method requires a suitable mesh. An analysis of the 1 m puncture drop test using successively refined finite element meshes was performed to find an acceptable mesh size and to study the mesh convergence using explicit dynamic finite element codes. The finite element model of the cask structure and the puncture bar is described. At the beginning a coarse mesh was created. Then this mesh was refined in two steps. In each step the size of the elements was bisected. The deformation of the mesh and the stresses were evaluated dependent on the mesh size. Finally, the results were extrapolated to an infinite fine mesh or the continuous body, respectively. The uncertainty of the numerical solution due to the discretization of the continuous problem is given. A safety factor is discussed to account for the uncertainty. The calculation results are compared with experimental data from a puncture drop test with a half-scale model of a cylindrical cask.
This paper supports the convergence studies of the Task Group on Computational Modeling for Explicit Dynamics reporting to the ASME BPV Code Working Group on Design Methodology.
A material testing program to characterize the concrete behavior under static and dynamic loads
(2010)
In this paper a comprehensive material testing program is described to characterize a German final repository concrete material (BERB1) subjected to static and dynamic loads. The BERB1 material was developed und specified by the German Bundesanstalt für Materialforschung und -prüfung (BAM) for targets used for drop tests according to the KONRAD requirements.
The testing consists of three concurrent laboratory experimental programs performed in the USA. An extensive preliminary testing program in Germany was performed to assure the required concrete specifications during fabrication and curing.
The first set of data is the static basic material test program consisting of structural tests to quantify macroscopic concrete properties under quasi-static loads. Cubic and cylindrical specimens are investigated under this effort. The second set of test data is from the static complete material test program, where cylindrical concrete specimens are subjected to a variety of quasi-static axial and radial stress and strain paths using a high-pressure hydraulic tri-axial chamber. The material is characterized for confining pressures up to 400 MPa. The third set of data is from the dynamic complete material test program, which uses a modified Split-Hopkinson Pressure Bar to induce dynamic compression and tension waves into cylindrical concrete specimens that generate strain-rates up to 400 s-1.
The ensemble of data generated in these experiments provides a complete set of data that effectively describes the behavior of this concrete and can be used to develop a constitutive calculation model. In addition, the results of the tests show a significant effect of moisture on the strength and rheology of this concrete for quasi-static pressures greater than 50 MPa. Numerical drop test simulations with the developed constitutive model in the Lagrangian finite element code, LS-DYNA, show good agreement with the experimental results from a BAM research project.