Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (78) (entfernen)
Referierte Publikation
- nein (78) (entfernen)
Schlagworte
- Welding (24)
- Hydrogen (22)
- Wasserstoff (11)
- Schweißen (8)
- Fügetechnik (7)
- Diffusion (6)
- High-entropy alloy (6)
- Mechanical properties (6)
- Forschung (5)
- Microstructure (5)
- Pipelines (5)
- Research (5)
- Creep-resistant steel (4)
- Hydrogen assisted cracking (4)
- Review (4)
- Studie (4)
- Thermal desorption analysis (4)
- Additive manufacturing (3)
- Carrier gas hot extraction (3)
- Degradation (3)
- High-strength steel (3)
- ISO 3690 (3)
- Wasserstofftechnologien (3)
- Electrochemical permeation (2)
- Experimental design (2)
- High Entropy Alloy (2)
- MAG Welding (2)
- Offshore (2)
- Pipeline (2)
- Post weld heat treatment (2)
- Steel (2)
- Stress relief cracking (2)
- Submerged arc welding (2)
- TIG welding (2)
- Weld metal (2)
- Wärmenachbehandlung (2)
- Activation energy (1)
- Additive Fertigung (1)
- Alloy concept (1)
- Application properties (1)
- Arc melting technique (1)
- Austenitic stainless steel (1)
- Bauteilversuch (1)
- Bedeutung (1)
- Betrieb (1)
- Carrier gas hot extraction (CGHE) (1)
- Component (1)
- Component Test (1)
- Component manufatcturing (1)
- Comprehensive study (1)
- Constitution diagram (1)
- Cr-Mo-V steel (1)
- Cracking (1)
- Creep resisting materials (1)
- Creep-resisting materials (1)
- Creep-resisting steel (1)
- Cross-weld tensile sample (1)
- Digital Image Correlation (DIC) (1)
- Dissimilar metal weld (1)
- Dissimilar metal weld (DMW) joint (1)
- Dissimilar weld joints (1)
- Eigenspannungen (1)
- Embrittlement (1)
- Energieerzeugung (1)
- Friction stir welding (1)
- Gas analytic (1)
- Heat control (1)
- Heat treatment condition (1)
- High manganese steel (1)
- High strength steels (1)
- High-pressure (1)
- High-strength (1)
- High-strength Steel (1)
- High-strength steels (1)
- Hochdruck (1)
- Hochfest (1)
- Hochfester Feinkornbaustahl (1)
- Hochfester Stahl (1)
- Hollow tensile specimen (1)
- Hydrogen concentration (1)
- Hydrogen diffusion (1)
- Hydrogen embrittlement (1)
- Hydrogen trapping (1)
- I-girder (1)
- Imperfektion (1)
- In-service (1)
- Infractstructure (1)
- Joining (1)
- Joining process (1)
- Kaltrissbildung (1)
- Kaltrissprüfung (1)
- Komponenten (1)
- Machining (1)
- Measurement (1)
- Messung (1)
- Metallurgie (1)
- Metals (1)
- Mikrolegierungseinfluss (1)
- Mock-up (1)
- Modifizierter Sprühlichtbogen (1)
- Multi-principal element alloys (1)
- Multiple-principal element alloy (1)
- Normung (1)
- Numerical simulation (1)
- Overview (1)
- PWHT (1)
- Process parameters (1)
- Processing (1)
- Prüfverfahren (1)
- Repair Welding (1)
- Repair welding (1)
- Reparatur (1)
- Reparaturschweißen (1)
- Research and Development (1)
- Residual Stress (1)
- Riss (1)
- Scanning kelvin probe force microscopy (1)
- Schallemissionsanalyse (1)
- Schweißverbindung (1)
- Sectioning method (1)
- Spannungsrelaxationsriss (1)
- Spannungsrelaxationsrisse (1)
- Stahl (1)
- Standardization (1)
- Stress corrosion cracking (1)
- Study (1)
- Surface integrity (1)
- T24 / 7CrMoVTiB10-10 (1)
- Technologie (1)
- Technologies (1)
- Temperature (1)
- Testing (1)
- Thermal desorption analysis (TDA) (1)
- Thermodynamische Simulation (1)
- Thoughness (1)
- Trapping and diffusion (1)
- Trägergasheißextraktion (1)
- UP Schweißen (1)
- UP-Schweißen (1)
- Ultrasonic-assisted milling (1)
- WEZ-Erweichung (1)
- Warmfeste Stähle (1)
- Weld heat input (1)
- Weld joint (1)
- Weld residual stresses (1)
- Welding parameters (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (53)
- 9.0 Abteilungsleitung und andere (41)
- 9.4 Integrität von Schweißverbindungen (37)
- 9.2 Versuchsanlagen und Prüftechnik (10)
- 6 Materialchemie (2)
- 6.2 Material- und Oberflächentechnologien (2)
- 8 Zerstörungsfreie Prüfung (2)
- 5 Werkstofftechnik (1)
- 5.1 Mikrostruktur Design und Degradation (1)
- 8.1 Sensorik, mess- und prüftechnische Verfahren (1)
A common approach to describe hydrogen traps is by their activation energy that is necessary to release hydrogen from the trap. In the present study, Cr-Mo-V steel T24 (7CrMoVTiB10-10) base material and TIG weld metal were investigated. Electrochemically hydrogen charged specimens were analyzed by thermal desorption analysis (TDA) with different linear heating rates. The results show two different effects. At first, the microstructure effect on trapping is evident in terms of higher hydrogen concentrations in the weld metal and increased activation energy for hydrogen release. Secondly, it is necessary to monitor the real specimen temperature. A comparison between the adjusted heating rate and the real specimen temperature shows that the calculated activation energy varies by factor two. Thus, the trap character in case of the base material changes to irreversible at decreased temperature. Hence, the effect of the experimental procedure must be considered as well if evaluating TDA results.
Hydrogen absorption and diffusion in T24 steel weld joints and effect on mechanical properties
(2018)
The present contribution summarizes results obtained from experiments with low-alloyed boiler steel grades T24 (CrMoV alloy), T22 (CrMo) and thermally simulated T24 HAZ microstructure and pure weld metal. The hydrogen absorption and diffusion behavior was investigated by permeation experiments and thermal desorption analysis (TDA). The results showed significant weld microstructure influence on diffusion by hydrogen trapping. Trapped hydrogen was determined in the T24 BM at temperatures up to 120 °C compared to 75 °C in the T22. In addition, the T24 HAZ showed decreased diffusion coefficients (at room temperature) of approximately one magnitude compared to the BM. For the mechanical properties, tensile tests were conducted with electrochemically hydrogen charged specimens and compared to results obtained from slow strain rate tests (SSRT) in high-temperature water up to 200 °C. The as-welded HAZ had remarkably increased susceptibility compared to the BM already at low hydrogen concentration of 1-2 ppm. The SSRT were conducted for free corrosion and acidic environment and confirmed this behavior at elevated temperatures for both HAZ microstructures of T24 and T22. Summarized, each weld microstructure has specific diffusion coefficients and shows different susceptibility to degradation of the mechanical properties, i.e. delayed hydrogen assisted cracking or stress corrosion cracking.
Die Energiewirtschaft ist bereits jetzt in massivem Umbruch. Herausforderungen der Energiewende sind u.a. die Einbindung von regenerativen Energiequellen und deren Speicherung. Dieses stellt auch die Fügetechnik, als zentrale Produktionstechnologie für die Komponentenfertigung, vor neue Aufgaben. Der Vortrag gibt zu ausgewählten Themen einen kurzen Überblick.
In order to satisfy the growing requirements towards lightweight design and resource efficiency in modern steel constructions, e.g. mobile cranes and bridges, high-strength steels with typical yield strength ≥ 690 MPa are coming into use to an increasing extent. However, these steels require special treatment in welding. The susceptibility for degradation of the mechanical properties in presence of hydrogen increases significantly with increasing yield strength. In case of missing knowledge about how and which amount of hydrogen is uptaken during welding, hydrogen assisted cracking can be a negative consequence. Moreover, modern weld technology like the modified spray arc process enables welding of narrower weld seams. In this context, a reduced number of weld beads, volume and total heat input are technical and economic benefits. This work presents the influence of welding parameters on the diffusible hydrogen content in both (1) single-pass and (2) multi-layer welds. Different hydrogen concentrations were detected by varied contact tube distance, wire feed speed, arc length as well as varied arc type (transitional arc and modified spray arc). The results showed, that all welding parameters had significant influence on the diffusible hydrogen concentration in the single-pass welds. By increasing the number of weld beads in case of multi-layer welding, the hydrogen concentration have been substantially reduced. Whereby, differences in hydrogen concentrations between both arc types are present.
Trapping in T24 steel weld joints – Effects on activation energy for hydrogen diffusion during TDA
(2017)
Failure cases in the past decade exhibited severe cracking in T24 welds and showed that generally hydrogen-assisted cracking (HAC) occurring up to 200°C cannot be excluded. A basic understanding is necessary on how hydrogen diffusion is influenced by the weld process. In this regard, both weld microstructures HAZ and weld metal have particular influence on hydrogen diffusion compared to the base material. In general, hydrogen diffusion at a certain temperature is described by diffusion coefficients representing an effective value of combined lattice diffusion and effects of reversible hydrogen traps. Those traps are typically precipitates, interstitials, grain boundaries and so on. A common approach to describe the trap character and its effect on diffusion is the determination of so-called activation energy. This can be done by respective thermal desorption analysis (TDA) with linear heating. In the present study, different T24 as-welded microstructures (BM, HAZ, WM) were investigated. For that purpose, electrochemically hydrogen charged specimens were analyzed by TDA with linear heating using a mass spectrometer for detection of ultra-low hydrogen amounts. The results showed that typically the as-welded HAZ had higher energy traps than the tempered base material. Nonetheless two important effects were ascertained: (1) it is strictly necessary to monitor the sample temperature due to its great impact on the hydrogen desorption peak temperature and (2) the real heating rate in the specimen vs. the applied heating rate has to be considered. Both influence the calculated activation energy, i.e. the assigned hydrogen trap character (moderate or strong trap), which changed up to a factor of two in terms of the calculated activation energy. This effect can be much more important compared to the microstructure effect itself. Hence, suitable experimental boundary conditions should be mandatory for the determination of hydrogen trap kinetics.
In order to satisfy the growing requirements towards lightweight design and resource efficiency in modern steel constructions, e.g. mobile cranes and bridges, high-strength steels with typical yield strength ≥ 690 MPa are coming into use to an increasing extent. However, these steels require special treatment in welding. The susceptibility for degradation of the mechanical properties in presence of hydrogen increases significantly with increasing yield strength. In case of missing knowledge about how and which amount of hydrogen is uptaken during welding, hydrogen assisted cracking (HAC) can be a negative consequence. Moreover, modern weld technology like the modified spray arc process enables welding of narrower weld seams. In this context, a reduced number of weld beads, volume and total heat input are technical and economic benefits. This work presents the influence of welding parameters on the diffusible hydrogen content in both singlepass and multi-layer welds. Different hydrogen concentrations were detected by varied contact tube distance, wire feed speed, arc length as well as varied arc type (transitional arc and modified spray arc). The results show, that all welding parameters have significant influence on the diffusible hydrogen concentration in the single-pass welds. By increasing the number of weld beads in case of multi-layer welding, the hydrogen concentration have been substantially reduced. Whereby, differences in hydrogen concentrations between both arc types are present.
In general, hydrogen assisted cracking is a result of a critical combination of local microstructure, mechanical load and hydrogen concentration. In that connection, welded microstructures of low-alloyed creep-resistant steels can show different hydrogen trapping kinetics. That influences the adsorbed hydrogen concentration as well as the diffusion itself in terms of moderate or strong trapping. A common approach to describe trapping is by the activation energy that is necessary to release hydrogen from a specific trap site. In the present study, T24 base material and weld metal were investigated. For that purpose, electrochemically hydrogen charged specimens were analyzed by thermal desorption analysis(TDA) with linear heating using a mass spectrometer. The results showed a microstructure effect on hydrogen trapping kinetics at elevated temperatures. Additionally, it is necessary to monitor the specimen temperature. A comparison between idealized temperature profile and real specimen temperature showed that the calculated activation energy varied up to a factor of two. Thus, the assigned trap character(moderate or strong) changed. In case of high temperature peaks, this effect could be more important compared to the microstructure effect itself.
Adaption of Heat Control Concepts for Welding Stress Optimization in High-strength Steel Components
(2016)
High-strength structural steels from 690 MPa are increasingly applied at present. Major reasons are lightweight design trends and potential cost reductions. The structural design of welds and their manufacturing become more challenging with increasing material strength. By reasons of a higher yield ratio of these steels, the development of high residual stresses has to be avoided, since they are detrimental to the components safety and performance. Local restraint stresses and welding loads due to external shrinkage restraints occur. Frequently, this leads to critical tensile residual stresses in the weld and HAZ. In this study, influences of welding process parameters and restraint conditions on the residual stress state in welded components of high-strength steels were investigated. Multilayer GMAW tests under free shrinkage and experiments under well-defined restraints in special in-house developed testing facilities were accomplished. The tests permitted analyses of the resulting local residual stresses measured by means of X-ray diffraction and global reaction stress build-up while welding and cooling. Significant effects were found for heat control, seam configuration and restraint condition. Besides high restraints, elevated preheating and interpass temperatures lead to increased welding stresses. An adaption of welding parameters considering heat control, weld run sequence and seam configuration proved to be beneficial.
Experimental simulation of dissimilar weld metal in high manganese steels by arc metling technique
(2016)
High manganese steels have great potential for use in automotive lightweight constructions (like car body structures) due to their superior strength and formability. In this scope, welding is the most common joining technique for sheet metal with challenges especially of dissimilar weld joints. In this case, the formation of martensite has to be considered resulting in a certain propability of brittle fracture in a respective load condition. In addition, no reliable weld metal microstructure prediction is possible with currently available constitution diagrams like the Schaeffler or WRC1992-diagram. Thus, the arc melting technique offers the possibility to investigate the effects of dilution on microstructures and properties of weld metal of high manganese steels. The results suggested that a complex indentification of microstructures is possible by directed experiments using the arc metling technique
Currently, residual stresses in welded HSLA (high strength low alloyed steels) are considerded by simplified “robust” procedures fixed in common standards (such as Eurocode 3). The models are mostly based on specimens from mild steel with lower strength. For HSLA, necessary material data is less available for realistic assessment of the appearing residual stresses in typical I-girders. Hence, the economic benefit of HSLA steels in scope of load bearing capacity cannot fully be exploit. Thus, the scope of this work is the measurement of weld residual stresses in component-like I-girders S355 and S690 by sectioning method and subsequent verification by global structural welding simulation.
Hydrogen can cause unexpected material failure under consideration of stresses (external/internal) during manufacturing, processing or service of the materials. This failure is mostly based on a certain degradation of the mechanical properties. Thus, the correlation of hydrogen trapping vs. a respective microstructure is necessary for high strength steels. Thus, the scope of this work is the improvement of existing hydrogen trap models by verification of activation energies for hydrogen traps as well as the influence of the determination method. In this scope, the thermal desorption method is appropriate to distinguish between different hydrogen traps. Nevertheless, the specimen temperature has to be accounted very carefully in case of calculating the necessary trap energy.