Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (66) (entfernen)
Schlagworte
- Nanocomposites (7)
- Broadband dielectric spectroscopy (5)
- Diffusion (5)
- Graphene (5)
- Molecular mobility (5)
- Rubber (5)
- Biodiesel (4)
- Dilation (4)
- Environmental stress cracking (ESC) (4)
- Nanocomposite (4)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (30)
- 7.5 Technische Eigenschaften von Polymerwerkstoffen (30)
- 6 Materialchemie (16)
- 6.6 Physik und chemische Analytik der Polymere (15)
- 5 Werkstofftechnik (10)
- 5.3 Polymere Verbundwerkstoffe (10)
- 6.5 Synthese und Streuverfahren nanostrukturierter Materialien (5)
- 8 Zerstörungsfreie Prüfung (2)
- 8.5 Röntgenbildgebung (2)
- 3 Gefahrgutumschließungen; Energiespeicher (1)
A report is presented on the development of a test for determining the long-term oxidation resistance of polyolefin materials, which is accelerated not only by elevated temperatures but also by increased oxygen pressure and a stirred aqueous medium. The method permits durability tests to be carried out at markedly lower temperatures with reasonable testing durations and significantly reduced diffusion limited oxidation effects and allows for physical and chemical impacts of aqueous media. Oxidative durability can be assessed by autoclave immersion exposures at three different temperatures (60, 70 and 80 degrees C) and 50 bar oxygen pressure and at 80 degrees C and two different oxygen pressures (usually 10 and 20 bar). Accelerated test data are evaluated by modified Arrhenius equations with the application of a three-dimensional regression analysis. The application of the test method to various materials, including PP non-woven materials and geosynthetics is demonstrated. 10 refs.
Dielectric Study of Molecular Mobility in Poly(propylene-graft-maleic anhydride)/Clay Nanocomposites
(2005)
Polymer/clay nanocomposite materials based on poly(propylene-graft-maleic anhydride) (PPgMAH) and two different organophilic modified clays were investigated by dielectric relaxation spectroscopy (DRS). In contrast to ungrafted polypropylene (PP), PPgMAH shows a dielectrically active relaxation process which can be assigned to localized fluctuations of the polar maleic anhydride groups. Its relaxation rate exhibits an unusual temperature dependence, which could be attributed to a redistribution of water molecules in the polymeric matrix. This is confirmed by a combination of Raman spectroscopy and thermogravimetric experiments (TGA) with real-time dielectric measurements under controlled atmospheres. In the nanocomposites this relaxation process is shifted to higher frequencies up to 3 orders of magnitude compared to the unfilled polymer. This indicates a significantly enhanced molecular mobility in the interfacial regions. In the nanocomposite materials a separate high-temperature process due to Maxwell-Wagner-Sillars (MWS) polarization was observed. The time constant of this MWS process can be correlated with characteristic length scales in nanocomposites and therefore provides additional information on dispersion and delamination/exfoliation of clay platelets in these materials. These properties also influence the diffusivity of the water molecules as revealed by real-time dielectric investigations.
Effect of well dispersed amorphous silicon dioxide in flame retarded styrene butadiene rubber
(2013)
Spherically shaped amorphous silicon dioxide with broad size particle distribution was used in combination with aluminium trihydroxide (ATH) in styrene butadiene rubber composites. The pyrolysis, flammability, fire properties, flame spread and gas diffusion were investigated. The kind and amount of ATH, but in particular the fine silicon dioxide chosen as an additive, influenced the thermal decomposition and fire behaviour of styrene butadiene rubber composites. Gravimetric gas sorption measurements showed that the gas diffusion was systematically lower with silicon dioxide. The initial pyrolysis gas release was hindered, increasing the temperature at which decomposition begins as well as the ignition time in fire tests. During combustion, ATH and silicon dioxide accumulate on the surface of the specimen, forming a residual protective layer. A reduced peak heat release rate and fire spread were observed. The addition of a special kind of silicon dioxide is proposed to play a key role in optimising fire retardancy.
Detailed atomistic simulations were carried out for swelling polymer/gas systems related to experimental sorption and dilation data for CO2 and CH4 in three glassy polymers (polysulfone PSU, the polyimide 6FDA-TrMPD, and a polymer of intrinsic microporosity PIM-1) at 308 K (35 °C) and pressures up to 50 bar. Corresponding experiments were performed with a gravimetric sorption balance and a dilatometer based on a capacitance distance sensor. For each polymer/gas system molecular packing models were prepared and equilibrated for two reference states: the pure polymer is taken as reference for the respective 'unswollen' state and similarly the state of the highest penetrant pressure reached in the corresponding experiment is taken to represent the 'swollen' state. Models for the latter were constructed in agreement with experimental data (pressure, temperature, gas concentration and volume dilation). Concentration–pressure isotherms of each polymer/gas system were obtained using Grand Canonical Monte Carlo (GCMC) simulations for both reference states (depleted of gas molecules), which are in good agreement with the experimental data in the respective pressure range. As expected these isotherms – due to the simulation technique used, merely based on hole-filling in a static host matrix – do not represent the sorption behavior over a broader range of gas pressures which may involve significant structural rearrangements as well as swelling and relaxational phenomena. Nevertheless, a linear combination of the two GCMC-isotherms allows the interpolation in order to describe the nonlinear gas sorption in the glassy polymers under investigation covering the penetrant pressure range between the reference states in good agreement with the experimental results.