Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (87)
- Vortrag (56)
- Zeitschriftenartikel (36)
- Beitrag zu einem Sammelband (15)
- Posterpräsentation (6)
- Buchkapitel (1)
Schlagworte
- GMR (18)
- Ultrasonic testing (10)
- Magnetic flux leakage (9)
- Ferroelectret (8)
- Reconstruction (8)
- Thermography (7)
- Cellular polypropylene (6)
- Non-destructive testing (6)
- Phased array (6)
- Eddy current (5)
Organisationseinheit der BAM
- 8 Zerstörungsfreie Prüfung (3)
- 8.4 Akustische und elektromagnetische Verfahren (3)
- 5 Werkstofftechnik (2)
- 5.2 Metallische Hochtemperaturwerkstoffe (2)
- 9 Komponentensicherheit (2)
- 5.1 Mikrostruktur Design und Degradation (1)
- 7 Bauwerkssicherheit (1)
- 7.1 Baustoffe (1)
- 8.5 Röntgenbildgebung (1)
- 9.2 Versuchsanlagen und Prüftechnik (1)
Eingeladener Vortrag
- nein (56)
Ultrasonic investigation of inhomogeneous anisotropic materials such as austenitic welds is complicated because its columnar grain structure leads to curved energy paths, beam splitting and asymmetrical beam profiles. A ray tracing model has potential advantage in analyzing the ultrasonic sound field propagation and there with optimizing the inspection parameters. In this contribution we present a 2D ray tracing model to predict energy ray paths, ray amplitudes and travel times for the three wave modes quasi longitudinal, quasi shear vertical, and shear horizontal waves in austenitic weld materials. Inhomogenity in the austenitic weld material is represented by discretizing the inhomogeneous region into several homogeneous layers. At each interface between the layers the reflection and transmission problem is computed and yields energy direction, amplitude and energy coefficients. The ray amplitudes are computed accurately by taking into account directivity, divergence and density of rays, phase relations as well as transmission coefficients. Ultrasonic sound fields obtained from the ray tracing model are compared quantitatively with the 2D Elastodynamic Finite Integration Technique (EFIT). The excellent agreement between both models confirms the validity of the presented ray tracing results. Experiments are conducted on austenitic weld samples with longitudinal beam transducer as transmitting probe and amplitudes at the rear surface are scanned by means of electrodynamical probes. Finally, the ray tracing model results are also validated through the experiments.
Progress in acoustical defect sizing NDT methods for the inspection of power-plant components
(2012)
The demand of improved NDT methods with proper visualization and sizing
capabilities is a persistent trend in maintenance and manufacturing quality inspection.
Especially when dealing with high quality standards in conjunction with safety-critical
components in the sector of energy and transportation quantitative NDT techniques are
vital to provide reliable quality control systems and a corresponding deeper insight into
the component structure for a further fracture-mechanical estimation. The paper thus
focuses the progress of the defect sizing capabilities of modern Ultrasonic Testing
(UT). In Ultrasonic Testing the SAFT-algorithm (Synthetic Aperture Focusing
Technique) currently experiences a renaissance. The method is based on combining the
data of different transducer positions with their corresponding varied propagating time
and it is currently applied in several industrial applications. SAFT enhances the SNR
and the spatial resolution and is thus a valuable tool when it comes to improved
defect detection and sizing. A tomographic-like data mapping is illustrated on several
examples, where adapted phased array systems were used for the inspection of turbine
components and also for a cladded mock-up of a nuclear reactor pressure vessel. In a
statistical investigation we also performed a comparison with other defect sizing
methods like TOFD (Time of flight diffraction).
GMR sensors are increasingly used for magnetic surface inspection due to their high
sensitivity and high spatial resolution. In case of simple planar or cylindrical shaped
components, the GMR-based inspection procedure can be automated easily. In order to
reduce the inspection time we present a GMR-based NDT-system consisting of a yoke
and a coil as a local magnetization unit. This way the global magnetization step and, if
necessary, the corresponding demagnetization cycle can be avoided reducing the
number of working steps. Using a local probe we measured plates, bearings, and rails,
each of which containing real fatigue cracks and reference artificial cracks of different
depths and orientations. Cracks with a depth of 40 ìm could be resolved with a signalto-
noise ratio of about 20. A reduction of the measuring time can be obtained using a
sensor array. We present an optimized sensor array for nondestructive testing
application, where gradiometric arranged GMR layers were fabricated on a board with
up to 48 GMR sensors. Each sensor detects the vertical field gradient. In our example
the baseline was chosen to be 250 ìm which efficiently suppress external background
fields without losing sensitivity for the detection of surface breaking defects.
We report on recent developments in the detection of surface breaking cracks using
flying laser spot thermography. Application of an infrared camera for mapping the
thermal radiation after excitation with a diode laser equipped with an optical scanner
allows us to examine a surface containing cracks in an entirely non-destructive,
contactless and fast way, without even moving the camera. We developed an efficient
and robust algorithm that can be applied directly to the recorded thermal sequences,
and that derives a single image containing all crack signatures. For this crack detection
technique, no specific synchronisation between laser and camera is required. Hence,
our approach is suitable for an upgrade of existing thermographic systems. The
feasibility of the proposed procedure is proven by testing an artificial test sample and a
piece of rail that comprises roll contact fatigue cracks and by comparing the results
with magnetic particle testing.
Polypropylene based ferroelectret films exhibit a strong electromechanical activity and provide a promising solution for the air coupled ultrasonic (ACUS) transducers. Ultrasonic transmission between two air coupled ferroelectret transducers in dependence on the amplitude and polarity of the high voltage exciting pulse revealed a strongly non-linear electromechanical response of the ferroelectret transmitter which provides an increase in the transmitter efficiency. The authors present a simple model describing both promotion and competition of the piezoelectric and electrostriction contributions, as well as increase in the transducer constant under high voltage excitation. Enlargement of the inverse transducer constant of the polypropylene ferroelectret film by a factor of 4 was demonstrated. The non-linear properties of the polypropylene ferroelectrets result in a strong increase in their ACUS figure of merit under the high voltage excitation, which exceeds the results of their technological optimisation. Consequently, enhancement of the ACUS system transmission by 12 dB and signal to noise ratio by 32 dB was achieved.
The paper presents numerical methods to detect and classify defects and inhomogeneities by means of active thermography. The objective is to determine the wall thickness of structure elements with an inaccessible back wall, for example, of pipes or Containers. As test specimens we used approximately 2 cm thick PVC samples with spatial variations in the back wall geometry. Flash lamps provided the heating. To know the thickness of the wall, we used two inversion methods and compared the results achieved. One is an iterative echo defect shape method and already tested on Steel test specimens with good reconstruction results. The second one is the Levenberg-Marquardt method, applied here to thermographic data for non-destructive testing. Since data capturing using active thermography and the presented numerical methods can easily be automated, the combination of these two procedures is a promising approach providing a broad area of application.
When dealing in ultrasonic testing with inhomogeneous and anisotropic material structure such as
diverse types of components made from austenitic or nickel based cast, which are currently used
for modern power plant concepts, data interpretation is quite difficult. For better understanding of
the complex interaction between the sound field and the component under test, the mathematical
modeling of sound propagation in solids is a substantial task to increase the probability of
detection of relevant defects.
First we present a mathematical approach for modeling the three dimensional transient
particle displacement as a function of time in each point in a half space excited by an impulsive
point load at the surface. The transient ultrasonic field of a rectangular array element is calculated
with this approach by a point source synthesis. Based on this solution we model the wave
propagation of a phased array transducer by time delayed superposition of the wave field of the
transducer elements.
Next we use an electrodynamic technique to visualize the grazing sound field at the surface
of a test block radiated by a phased array probe. By detecting the grazing beam at the samples
surface with a small electrodynamic probe, we measured the particle displacement as a function of
time. It allows for measuring the displacement in all three spatial directions. This comprises the
detection of the horizontal and vertical particle displacement with respect to the surface and thus
also the detection of longitudinal and shear waves is possible.
The calculated and measured wave fields will be compared for different delay laws in
isotropic and transversely isotropic media. The results support the theoretical activities to model
the wave propagation and to find optimal testing parameters for different components and
configurations.