Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (5) (entfernen)
Schlagworte
- SADT (2)
- AIBN (1)
- DSC (1)
- Deflagration (1)
- Experimental study (1)
- Flammable gas (1)
- Heat accumulation storage test (1)
- Mass burning rate (1)
- Modeling (1)
- Organic peroxides (1)
Data and prediction for the mass burning rate of a tert-butyl-peroxy-benzoat (TBPB) pool fire (pool diameter = 3 m) is presented. The mass burning rates of TBPB fires are up to six times higher and less dependent on pool diameter compared to hydrocarbon pool fires caused by an additional heat release rate due to exothermic decomposition reaction in the liquid phase. This heat release rate is calculated using a 1st order reaction kinetic obtained from micro calorimetric measurements. A new model is derived considering the heat release rate due to the decomposition reaction which is shown to be 100 % of the heat release rate radiated to the pool surface. With the presented model, including also physical quantities, especially the limiting fuel concentration for upward flame propagation, it is possible to predict the mass burning rates of large TBPB pool fires. The predicted values are in very good agreement with the experiments.
We present our results on the comparsion of two methods for the SADT determination. Both methods, UN test H.1 and UN test H.4 are recommended by the international transport regulations from the UN. But during the last years the applicability of the UN test H.4 has been questioned for solid substances. Therefore, three organic peroxidesand one self-reactive substance have been investigated in 5 kg and 20 kg packages as well as in the UN test H.4 in a 500 mL dewar vessel. The SADT values determined with the different methods match. The UN test H.4 seems to be well suited also for solid substances at least for 20 kg or 60 L.
Azodicarbonamid (ADCA) ist ein bekanntermaßen deflagrationsfähiger Stoff, der in der Kunststoffindustrie als Treib- und Blähmittel eingesetzt wird. In diesem Beitrag wird die Deflagration von ADCA unter verschiedenen Bedingungen betrachtet. Es werden Ergebnisse von Experimenten in offenen und geschlossenen Systemen präsentiert. In geschlossenen Systemen wurde die Zusammensetzung der umgebenden Atmosphäre von Luft mit Umgebungsdruck über Luft mit Unter- und Überdruck hin zu Stickstoff mit Umgebungsdruck variiert. Um das Deflagrationsrisiko zu reduzieren wird eine Verarbeitung von ADCA im Vakuum vorgeschlagen.
Die thermische Zersetzung von AIBN wurde in einem Projekt mit mehreren Teilnehmern untersucht. Hierbei wurde die selbstbeschleunigende Zersetzungstemperatur SADT) sowohl experimentell als auf Grundlage von Simulationsrechnungen bestimmt. Die Besonderheit bei dem Feststoff AIBN ist, dass die Zersetzung sowohl in der festen, als auch in der flüssigen Phase nach dem Schmelzen stattfindet, was bei den durchgeführten Simulationsrechnungen berücksichtigt werden musste. Die berechneten SADT Werte stimmen mit den experimentell bestimmten sehr gut überein.