Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (23)
Schlagworte
- Rhenium (3)
- Chelates (2)
- Copper(II) (2)
- Crystal structure (2)
- EXAFS (2)
- Fatty acids (2)
- Organic ligands (2)
- Radiopharmaceuticals (2)
- Actinide (1)
- Bioapatite (1)
Organisationseinheit der BAM
The CuII complex of H4TETP (H4TETP = 1,4,8,11-tetraazatetradecane-1,4,8,11-tetrapropionic acid) is five-coordinate with a distorted square-pyramidal structure (τ = 0.45; i.e. the geometry is nearly half-way between square-pyramidal and trigonal-bipyramidal) and a relatively long Cu–N and a short Cu–O bond; the comparison between powder and solution electronic spectroscopy, the frozen solution EPR spectrum and ligand-field-based calculations (angular overlap model, AOM) indicate that the solution and solid state structures are very similar, i.e. the complex has a relatively low 'in-plane' and a significant axial ligand field with a dx²-y² ground state. The ligand-enforced structure is therefore shown to lead to a partially quenched Jahn–Teller distortion and to a relatively low complex stability, lower than with the corresponding acetate-derived ligand H4TETA. This is confirmed by potentiometric titration and by the biodistribution with 64Cu-labeled ligands which show that the uptake in the liver is significantly increased with the H4TETP-based system.
Bromotricarbonyl{15-[2-(methylsulfanyl)ethylsulfanyl]pentadecanoic acid-kappa2S,S'}rhenium(I)
(2006)
The title compound, [ReBr(C18H36O2S2)(CO)3], was synthesized and characterized as a non-radioactive surrogate of a novel Tc-containing fatty acid derivative prepared according to the tricarbonyl/dithioether design with the objective of developing new Tc-based radiopharmaceuticals for the non-invasive diagnosis of myocardial metabolism. The Re chelate contains the metal in the oxidation state +1 and is attached to the terminal position of a fatty acid. The complex formation was accomplished by a ligand exchange reaction using [NBu4]2[Re(CO)3Br3] as starting material.
The nature of the heteroatom X incorporated in the five-membered PXP-diphosphine bridging chain was found to play a primary unit role both in the overall stability and in the stereochemical arrangement of nitrido-containing [M(N)(PXP)]2+ metal fragments (M = Tc, Re). Thus, by mixing PXP ligands with labile [Re(N)Cl4]- and Tc(N)Cl2(PPh3)2 nitrido precursors in CH2Cl2/MeOH mixtures, a series of neutral M(N)Cl2(PXP) complexes (M = Tc, 1-5; M = Re, 8, 9) was collected. In the resulting distorted octahedrons, PXP adopted facial or meridional coordination, and combination with halide co-ligands produced three different stereochemical arrangements, that is, fac,cis, mer,cis, and mer,trans, depending primarily on the nature of the diphosphine heteroatom X. When X = NH, mer,cis-Tc(N)Cl2(PNP1), 1, was the only isomer formed. Alternatively, when a tertiary amine nitrogen (X = NR; R = CH3, CH2CH2OCH3) was introduced in the bridging chain, fac,cis-M(N)Cl2(PN(R)P) complexes (M = Tc, 2, 3; M = Re, 8f) were obtained. Isomerization into the mer,cis-Re(N)Cl2(PN(R)P), 8m, species was observed only in the case of rhenium when the tertiary amine group carried the less encumbering methyl substituent. fac,cis-Tc(N)Cl2(PSP), 4f, was isolated in the solid state when X = S, but a mixture of fac,cis-Tc(N)Cl2(PSP) and mer,trans-Tc(N)Cl2(PSP), 4m, isomers was found in equilibrium in the solution state. A similar equilibrium between fac,cis-M(N)Cl2(POP) (M = Tc, 5f; M = Re, 9f) and mer,trans-M(N)Cl2(POP) (M = Tc, 5m; M = Re, 9m) species was detected in POP-containing complexes. The molecular structure of all of these complexes was assessed by means of conventional physicochemical techniques including multinuclear NMR spectroscopy and X-ray diffraction analysis of representative mer,cis-Tc(N)Cl2(PN(H)P), 1, fac,cis-Tc(N)Cl2(PSP), 4f, and mer,cis-Re(N)Cl2(PN(Me)P), 8m, compounds.
The preparation and characterization of tris-pyridyl bispidine (3,7-diazabicyclo[3.3.1]nonane) derivatives with benzimidazole and imidazole donor groups at the N-3 position of the bispidine Skeleton and their copper(II) complexes are reported. The impact of the hetaryl substituents on the configurational isomerism of piperidones and their corresponding bispidones has been studied by NMR spectroscopy, revealing the exclusive appearance in the enol form for the piperidones in solution and the trans-configuration regarding the two pyridyl substituents, as well as the sole formation of the unsymmetric exo-endo isomers for the corresponding bispidones. Thus, the bispidones are preorganized ligands for building pentacoordinated complexes, confirmed by the preparation and characterization of the corresponding Cu(II) complexes. Of the di-pyridyl piperidones with benzimidazole and imidazole substituents, and of the Cu(II) complex of the benzimidazole-containing bispidone, Crystals have become available for the analysis by X-ray diffraction, showing that the piperidones form the enol tautomers also in the solid state.
Stable isotope ratios and trace element concentrations of fossil bones and teeth are important geochemical proxies for the reconstruction of diet and past environment in archaeology and palaeontology. However, since diagenesis can significantly alter primary diet-related isotope signatures and elemental compositions, it is important to understand and quantify alteration processes. Here, we present the results of in-vitro Alteration experiments of dental tissues from a modern African elephant molar reacted in aqueous solutions at 30 °C and 90 °C for 4 to 63 days. Dental cubes with ≈ 3 mm edge length, comprising both enamel and dentin, were placed into 2 mL of acidic aqueous solution enriched in different isotopes (25Mg, 44Ca, 67Zn, 86Sr, initial pH 1). Element and isotope distribution profiles across the reacted cubes were measured with LA-(MC-)ICP-MS and EMPA, while potential effects on the bioapatite crystal structure were characterised by Raman spectroscopy. In all experiments isotope ratios measured by LA-(MC-)ICP-MS revealed an alteration of the enamel in the outer ≈ 200–300 μm. In contrast, dentin was fully altered (≈ 1.4 mm) after one week at 90 °C while the alteration did not exceed a depth of 150–200 μm during the 30 °C experiments. Then, the tracer solution started also to penetrate through the enamel-dentin junction into the innermost enamel, however, leaving the central part of the enamel unaltered, even after three months. The Raman spectra suggest an initial demineralisation in the acidic environment while organic matter (i.e. collagen) is still preserved. In the 90 °C experiment, Raman spectra of the v1 PO4) band of the dentin shift over time towards synthetic hydroxylapatite patterns and the Ca (and Sr) concentrations in the respective solutions decrease. This indicates precipitation of newly formed apatite. Isotope and element concentration profiles across the dental tissues reveal different exchange mechanisms for different isotope systems. Magnesium is leached from enamel and dentin, while Zn is incorporated into the apatite crystal structure. However, the distribution of both elements is not affected in the innermost enamel where their concentrations do not change over the whole duration of the experiments. We found no correlation of reaction depth in the cubes and experimental duration, which might be caused by natural variability of the dental material already at the beginning of the experiment. Our alteration experiments in a closed system at high temperatures ≤90 °C and low initial pH demonstrate that at least the central part of mm-thick mammalian enamel apatite seems to be resistant against alteration preserving its pristine bioapatite mineral structure as well as its in-vivo elemental and isotopic composition. The experiments assess diagenetic alteration in a novel multi-proxy approach using in-situ analyses in high spatial resolution. It is demonstrated that the isotopes of Ca, Sr, Zn and
Mg in the dentin are prone for diagenetic alteration, while enamel is more resistant against alteration and could be used for dietary and physiological reconstructions in fossil teeth.
Suicide gene therapy with the herpes simplex virus type-1 thymidine kinase gene (HSV-1 tk) is considered to be a promising approach to the treatment of cancer. Making use of the lower specificity of the viral enzyme compared to human thymidine kinase, the therapy involves the administration of antiviral agents (e.g., ganciclovir) as prodrugs to induce enzymatic cell death in those cells that express the transferred gene. 18F-labelled derivatives have been described for monitoring location, duration, and magnitude of the viral kinase enzyme activity by positron emission tomography (PET). Since an optimal radiotracer has not been developed, novel substances were synthesized for monitoring gene expression. A group of 13 nucleoside analogues were synthesized, among them N1-methyl-9-[(1,3-dihydroxy-2-propoxy)methyl]guanine (5) and N1-methyl-9-[(4-hydroxy)-3-hydroxymethylbutyl]guanine (7) as methyl analogues of ganciclovir and penciclovir and their related fluoro compounds (6, 8). Further novel derivatives include N6-methyl-9-[(1,3-dihydroxy-2-propoxy)methyl]-, N6-methyl-9-[(4-hydroxy)-3-hydroxymethylbutyl]adenine (9, 10), as well as the uracil derivatives 5-hydroxy-1-[(1,3-dihydroxy-2-propoxy)methyl]uracil (11), 6-methyl-1-[(1,3-dihydroxy-2-propoxy)-methyl]uracil (12), and its 3-fluoro-derivative (13).
Technetium- and Rhenium-Labelled Fatty Acids as Model Compounds for Myocardial Metabolism Imaging
(2002)
In an attempt to develop new technetium-based radiopharmaceuticals for the non-invasive diagnosis of oxidative myocardial metabolism, rhenium model compounds according to the 3+1' mixed ligand approach as well as the organometallic tricarbonyl-design were synthesized. The geometrical impact of different chelates on the integrity of the fatty acid head structure was determined by single crystal X-ray analyses. To evaluate the diagnostic potential of the analogous Technetium-99m compounds, fatty acid complexes of the 3+1' mixed ligand type were prepared on n.c.a.-level and studied in the isolated constant-flow-perfused guinea pig heart model; compared to established [123I]Iodine-labelled fatty acid radiotracers, the tested Technetium-99m derivatives showed a specific, however significantly lower myocardial extraction rate.
In an attempt to develop new technetium-based radiopharmaceuticals for the noninvasive diagnosis of myocardial metabolism, we have synthesized three examples of novel metal-containing fatty acid derivatives according to the 3+1 mixed-ligand and the Schiff base/tricarbonyl design. The chelates contain the metal core in the oxidation states +5 and +1, respectively, and are attached to the end-position of a fatty acid chain. The complex formation was accomplished by ligand-exchange reactions with three different rhenium precursors, whereas the inactive rhenium metal was utilized as a surrogate of the technetium radionuclide. The molecular structures of the fatty acid complexes 7, 10 and 14 were determined by single-crystal X-ray diffraction analyses and impressively show a general problem in technetium tracer research, namely the significant structural alterations of bioactive molecules by coordination even to small metal chelates.
This paper reports the synthesis, biological evaluation, in vitro and ex vivo autoradiography of the first Tc-99m ligand with subnanomolar affinity for the 5-HT1A receptor and a remarkably high affinity for the alpha1-adrenergic receptor. The neutral 3+1 mixed-ligand complex combines 4-(6-mercaptohexyl)-1-(2-methoxyphenyl)piperazine as monodentate and 3-(N-methyl)azapentane-1,5-dithiol as tridentate unit with oxotechnetium(V). The analogous rhenium complex was synthesized for complete structural characterization and used in receptor binding assays. In competition experiments both complexes display subnanomolar affinity for the 5-HT1A receptor (IC500.24 nM for Re, 0.13 nM for Tc) but also very high affinities for the alpha1-adrenergic receptor (IC50 0.05 nM for Re, 0.03 nM for Tc). Biodistribution studies show a brain uptake in rat of 0.22% ID five minutes post injection. In vitro autoradiographic studies in rat brain and postmortem human brain indicate accumulation of the Tc-99m complex in brain areas which are rich in 5-HT1A receptors or in alpha1-adrenergic receptors. This in vitro enrichment can be blocked respectively by the 5-HT1A receptor agonist 8-OH-DPAT or by prazosin hydrochloride, an alpha1-adrenergic receptor antagonist. Ex vivo autoradiographic studies in rats show a slight accumulation of the Tc-99m complex in 5-HT1A receptor-rich areas of the brain, which could not be blocked, as well as in regions rich in alpha1-adrenergic receptors, which could be blocked by prazosin hydrochloride.
Hydrated actinide(IV) ions undergo hydrolysis and further polymerization and precipitation with increasing pH. The resulting amorphous and partly crystalline oxydydroxides AnOn(OH)4-2n·xH2O can usually be observed as colloids above the An(IV) solubility limit. The aging process of such colloids results in crystalline AnO2. The presence of carboxylates in the solution prevents the occurrence of such colloids by formation of polynuclear complexes through a competing reaction between hydrolysis and ligation. The majority of recently described carboxylates reveals a hexanuclear core of [An6(µ3-O)4(µ3-OH)4]12+ terminated by 12 carboxylate ligands. We found that the An(IV) carboxylate solution species remain often preserved in crystalline state. The An(IV) carboxylates show An–An distances which are ~ 0.03 Å shorter than the An–An distances in AnO2 like colloids. The difference in the distances could be used to identify such species in solution.
Our group previously synthesized 99mTc-labeled fatty acids suitable for myocardial metabolism and flow imaging. In this set of experiments, 29 new analogues were synthesized according to the 4 + 1 mixed ligand approach with some specific differences. Conventional 4 + 1 99mTc-fatty acids are built in the sequence: Tc-chelate, alkyl chain, and carboxylic group. We developed compounds following a new design with the sequence: carboxylic group, alkyl chain, Tc-chelate, and lipophilic tail. Therefore, the 99mTc-chelate was transferred to a more central position of the compound, aiming toward an improved myocardial profile and an accelerated liver clearance. In this context, several functional groups incorporated in the lipophilic tail section were tested to evaluate their influence on the compound's character. In addition to biodistribution studies in vivo, the myocardial first-pass extraction of the compounds was tested in an isolated Langendorff rat heart model. A satisfactory myocardial uptake of up to 20% of the injected dose (% ID) in the perfused heart and a fast liver clearance in vivo with only 0.29% ID/g at 60 min postinjection demonstrate that the induced molecular modifications affect the kinetics of 99mTc-radiolabeled fatty acid compounds favorably. From the data set, rules for estimating the biodistribution of fatty acids tracers are deduced.
The quinazoline derivatives (3-chloro-4-fluorophenyl)quinazoline-4,6-diamine (2) and (3-bromophenyl)quinazoline-4,6-diamine (3) were labelled with 99mTc using the 4 + 1 mixed-ligand system [Tc(NS3)(CN-R)] and the tricarbonyl moiety fac-[Tc(CO)3]+. In the 4 + 1 approach the technetium(III) is stabilized by a monodentate isocyanide bearing a quinazoline fragment (L1, L2) and by the tetradentate tripodal ligand tris(2-mercaptoethyl)-amine (NS3). In the 4 + 1 approach, 99mTc-labelling was performed in a two-step procedure, the complexes [Tc(NS3)(L1)] (7a) and [Tc(NS3)(L2)] (8a) being obtained in about 5070% yield. In the tricarbonyl approach, the fac-[Tc(CO)3]+ unit is anchored by two different monoanionic chelators bearing the quinazoline derivatives (3-chloro-4-fluorophenyl)quinazoline-4,6-diamine (2) and (3-bromophenyl)quinazoline-4,6-diamine (3). Both chelators have a N2O donor atom set, but one contains a pyrazolyl ring (L5H) and the other contains a pyridine unit (L6H). In both cases the conjugation of the quinazoline to the chelator was done through the secondary amine of the potentially tridentate and monoanionic chelators, the corresponding 99mTc-complexes (10a, 11a) being obtained in quantitative yield. The identities of the 99mTc-labelled quinazolines (7a, 8a, 10a, 11a) were confirmed by comparison with the HPLC profiles of the analogous Re compounds (7, 8, 10, 11). All these Re complexes were characterized by NMR and IR spectroscopy, elemental analysis and in some cases by MS and X-ray diffraction analysis. In vitro studies indicate that the quinazoline fragments, after conjugation to the cyano group (L1, L2) or to the pyrazolyl containing chelator (L5H), as well as the corresponding Re complexes (7, 8, 10) inhibit significantly the EGFR autophosphorylation and also inhibit A431 cell growth. These two effects were also found for the pyridine-containing chelator (L6H) and corresponding Re complex (11), although to a lesser extent.
A number of very relevant processes for protection and reconstruction of buildings can be supported by controlled heating: elimination of pests without using hazardous Chemicals, drying and decontamination of timber and many other building materials. For this purpose, radio-frequency (RF) dielectric heating is an advantageous Option because the materials and structures can be heated directly by energy absorption in the volume, homogeneously and, if required, relatively fast.
Compared to microwaves, the penetration depths are usually much larger and the flexibility with respect to different materials is wider. Namely, heating can also be realized for dry materials because the dielectric loss is as not closely related to the presence of water as for microwave applications.
Cerium(III) and cerium(IV) both form formate complexes. However, their species in aqueous solution and the solid-state structures are surprisingly different. The species in aqueous solutions were investigated with Ce K-edge EXAFS spectroscopy. Ce(III) formate shows only mononuclear complexes, which is in agreement with the predicted mononuclear species of Ce(HCOO)2+ and Ce(HCOO)2+. In contrast, Ce(IV) formate forms in aqueous solution a stable hexanuclear complex of [Ce6(µ3-O)4(µ3-OH)4(HCOO)x(NO3)y]12x-y. The structural differences reflect the different influence of hydrolysis, which is weak for Ce(III) and strong for Ce(IV). Hydrolysis of Ce(IV) ions causes initial polymerization while complexation through HCOO– results in 12 chelate rings stabilizing the hexanuclear Ce(IV) complex. Crystals were grown from the above-mentioned solutions. Two crystal structures of Ce(IV) formate were determined. Both form a hexanuclear complex with a [Ce6(µ3-O)4(µ3-OH)4]12+ core in aqueous HNO3/HCOOH solution. The pH titration with NaOH resulted in a structure with the composition [Ce6(µ3-O)4(µ3-OH)4(HCOO)10(NO3)2(H2O)3]·(H2O)9.5, while the pH adjustment with NH3 resulted in [Ce6(µ3-O)4(µ3-OH)4(HCOO)10(NO3)4]·(NO3)3(NH4)5(H2O)5. Furthermore, the crystal structure of Ce(III) formate, Ce(HCOO)3, was determined. The coordination polyhedron is a tricapped trigonal prism which is formed exclusively by nine HCOO– ligands. The hexanuclear Ce(IV) formate species from aqueous solution is widely preserved in the crystal structure, whereas the mononuclear solution species of Ce(III) formate undergoes a polymerization during the crystallization process.
Bispidines for dual imaging
(2014)
The efficient transformation of the hexadentate bispidinol 1 into carbamate derivatives yields functional bispidines enabling convenient functionalization for targeted imaging. The BODIPY-substituted bispidine 3 combines a coordination site for metal ions, such as radioactive 64CuII, with a fluorescent unit. Product 3 was thoroughly characterized by standard analytical methods, single crystal X-ray diffraction, radiolabeling, and photophysical analysis. The luminescence of ligand 3 was found to be strongly dependent on metal ion coordination: CuII quenches the BODIPY fluorescence, whereas NiII and ZnII ions do not affect it. It follows that, in imaging applications with the positron emitter 64CuII, residues of its origin from enriched 64Ni and the decay products 64NiII and 64ZnII, efficiently restore the fluorescence of the ligand. This allows for monitoring of the emitted radiation as well as the fluorescence signal. The stability of the 64CuII–3 complex is investigated by transmetalation experiments with ZnII and NiII, using fluorescence and radioactivity detection, and the results confirm the high stability of 64CuII–3. In addition, metal complexes of ligand 3 with the lanthanide ions TbIII, EuIII, and NdIII are shown to exhibit emission of the BODIPY ligand and the lanthanide ion, thus enabling dual emission detection.
Four cyclam (1,4,8,11-tetraazacyclotetradecane) ligands with different numbers of N-substituted propionic acid groups lead to pentacoordinate copper(II) complexes that adopt trans-I configurations (4+1 geometry), that is, the complexes have a dx2-y2 ground state with significant rhombic distortion. From the structural data (X-ray diffraction analysis and electron paramagnetic resonance, UV/Vis and IR spectroscopy), as the number of secondary amine groups of the macrocyclic ring substituted with propionic acid groups increases, the distortion from square pyramidal to trigonal bipyramidal increases, and this is expected to lead to relatively low complex stabilities. This is confirmed by in vitro studies with superoxide dismutase (SOD) and human serum challenge experiments as well as by biodistribution data with the 64Cu-labelled complexes. The 64Cu-labelled complexes with cyclam monopropionic and dipropionic acid show high in vitro and in vivo stabilities, and the latter provides a comparable biodistribution profile to that of 64CuTETA (TETA = 1,4,8,11-tetraazacyclotetradecane-1,4,8,11-tetraacetic acid).
: Simvastatin is one of the most widely used active pharmaceutical ingredients for the treatment of hyperlipidemias. Because the compound is employed as a solid in drug formulations, particular attention should be given to the characterization of different polymorphs, their stability domains, and the nature of the phase transitions that relate them. In this work, the phase transitions delimiting the stability domains of three previously reported simvastatin forms were investigated from structural, energetics, and dynamical points of view based on single crystal X-ray diffraction (SCXRD), hot stage microscopy (HSM), and differential scanning calorimetry (DSC) experiments (conventional scans and heat capacity measurements), complemented with molecular dynamics (MD) simulations. Previous assignments of the crystal forms were confirmed by SCXRD: forms I and II were found to be orthorhombic (P212121, Z′/Z = 1/4) and form III was monoclinic (P21, Z′/Z = 2/4). The obtained results further indicated that (i) the transitions between different forms are observed at 235.9 ± 0.1 K (form III → form II) and at 275.2 ± 0.2 K (form II → form I) in DSC runs carried out at 10 K min−1 and close to these values when other types of techniques are used (e.g., HSM). (ii) They are enantiotropic (i.e., there is a transition temperature relating the two phases before fusion at which the stability order is reversed), fast, reversible, with very little hysteresis between heating and cooling modes, and occur under single crystal to single crystal conditions. (iii) A nucleation and growth mechanism seems to be followed since HSM experiments on single crystals evidenced the propagation of an interface, accompanied by a change of birefringence and crystal contraction or expansion (more subtle in the case of form III → form II), when the phase transitions are triggered. (iv) Consistent with the reversible and small hysteresis nature of the phase transitions, the SCXRD results indicated that the molecular packing is very similar in all forms and the main structural differences are associated with conformational changes of the “ester tail”. (v) The MD simulations further suggested that the tail is essentially “frozen” in two conformations below the III → II transition temperature, becomes progressively less hindered throughout the stability domain of form II, and acquires a large conformational freedom above the II → I transition. Finally, the fact that these transitions were found to be fast and reversible suggests that polymorphism is unlikely to be a problem for pharmaceutical formulations employing crystalline simvastatin because, if present, the III and II forms will readily convert to form I at ambient temperature.
Nitrogen-rich noble metal nitrides possess unique mechanical and catalytic properties, therefore their synthesis and characterization is of interest for fundamental solid state chemistry and materials science. In this study we have synthesized a singlesource precursor [Rh(NH3)6]3(N3)5Cl4 (Rh:N ratio 1:11). Its controlled decomposition in a laser-heated diamond anvil cell at 39 GPa resulted in a formation of rhodium pernitride, RhN2. According to the results of single-crystal X-ray diffraction RhN2 has arsenopyrite structure type crystal structure previously unknown for this compound (P21/c (no. 14).
Two new octahedral cluster complexes [Re6S8(3,5-Me2PzH)6]Br2 · 2(3,5-Me2PzH) (1) and [Re6Se8(3,5-Me2PzH)6]Br2 · 2(3,5-Me2PzH) (2), where 3,5-Me2PzH is 3,5-dimethylpyrazole, have been synthesized using reaction of rhenium chalcobromide complexes Cs4[Re6S8Br6] · 2H2O and Cs3[Re6Se8Br6] · H2O, respectively, with molten 3,5-dimethylpyrazole. Both compounds synthesized were characterized by X-ray single-crystal diffraction and chemical analysis, IR and luminescent spectra.