Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (19)
- Beitrag zu einem Tagungsband (10)
- Forschungsbericht (3)
- Beitrag zu einem Sammelband (1)
- Vortrag (1)
Schlagworte
- Ellipsometry (5)
- Thin films (4)
- Gas sensing (3)
- Zentrifugentechnologie (3)
- Doped tin oxide (2)
- Ellipsometrie (2)
- Haftfestigkeit (2)
- Härteprüfung (2)
- Mehr-Proben-Prüfung (2)
- Mueller-Matrix imaging ellipsometry (2)
- Optical properties (2)
- Spectroskopic Imaging (2)
- Abbildende Ellipsometrie (IE) (1)
- Adhesion (1)
- Air-coupled (1)
- Air-coupled ultrasonics (1)
- Airborne (1)
- Amorphization (1)
- Amorphous state (1)
- Anti-counterfeiting (1)
- Beanspruchung auf Zug und Druck (1)
- Brinell- und Vickers Härte (1)
- Carbon (1)
- Carbon-based Films (1)
- Centrifuge technology (1)
- Certified reference material (1)
- Certified reference materials (1)
- Coagulation (1)
- Coated/Layered Reference Materials (1)
- Coatings (1)
- Compressive strength (1)
- Crystallization (1)
- Degradation (1)
- Depth profiling (1)
- Druckfestigkeit (1)
- Electromechanical properties (1)
- Ellipsometric encoding (1)
- Fabry-Perot Schichten (1)
- Fabry-Perot layer stacks (1)
- Fabry-Perot layers (1)
- Femtosecond laser (1)
- Ferroelectret (1)
- Ferroelectrets (1)
- GDS (1)
- Glow discharge spectrometry (1)
- Hardness (1)
- Hydrogen (1)
- ISO (1)
- Imaging Ellipsometrie (1)
- Imaging Null Ellipsometrie (INE) (1)
- Imaging ellipsometry (IE) (1)
- Impurities (1)
- Inhomogeneous and patterned thin films (1)
- Interlaboratory Comparison (1)
- Iron doped tin oxide (1)
- Klebfestigkeit (1)
- Kohlenstoffschichten (1)
- Magnetron (1)
- Magnetron sputtering (1)
- Metal oxides (1)
- Metrology (1)
- Mikroskopie (1)
- Multilayer (1)
- Multiple-sample testing (1)
- Nanometerbereich (1)
- Nitrides (1)
- Non-contact transducers (1)
- Oberflächenverunreinigungen (1)
- Optical Property (1)
- Optical materials (1)
- Optical microscopy (OM) (1)
- PA-CVD (1)
- Patterned films (1)
- Photoresist (1)
- Plasma collision processes (1)
- Plasma deposition (1)
- Plasmachemie (1)
- Plasmonic absorption (1)
- Polarization spectroscopy (1)
- Product authentification (1)
- Produkt- und Markenschutz (1)
- Referenced Spectral Ellipsometry (RSE) (1)
- Referenced spectroscopic ellipsometry (RSE) (1)
- Refractive index (1)
- Resonance (1)
- Round Robin (1)
- SPR effect (1)
- Schichtdicke (1)
- Schleimpflug-Optik (1)
- Scratch test (1)
- Sheet resistivity (1)
- SiO2 (1)
- Silicon (1)
- SnO2 (1)
- Spectroscopic ellipsometry (1)
- Spectroscopic imaging and mapping ellipsometry (1)
- Spectroscopic imaging ellipsometry (1)
- Structural anomalies (1)
- Structural inhomogenities (1)
- Surface plasmon (1)
- Surface plasmon resonance (1)
- Tensile strength (1)
- Thermoacoustic (1)
- Transparent conductive oxides (1)
- Transparent conductive oxides (TCO) (1)
- Ultrasonic transducer (1)
- Verbundfestigkeit (1)
- Visualisierung bei geringem Kontrast (1)
- XPS characterzation (1)
- Zugfestigkeit (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (1)
Adhesion and other mechanical behaviour of coatings is at present routinely tested in industry and research organisations using the scratch test. The test has been the subject of a European Standard prEN 1071-3:2000 established by the European Standards Committee CEN TC184 WG5. A previous European project on the development and validation of test methods for thin hard coatings—FASTE—revealed that uncertainties in the Rockwell C stylus tip shape represent a major source of error for the scratch-test method. Therefore a follow-up project—REMAST—was started to develop and certify a reference material as a quality control tool for the testing and qualification of scratch-test instruments. In addition, a considerable effort was devoted to improve the scratch stylus manufacturing process. This paper presents the results of the REMAST project. During a feasibility study, two candidate materials—titanium nitride (TiN) and diamond-like carbon (DLC) coatings both on high speed steel substrates—were evaluated. Because of the lower sensitivity to styli tip shape variations and higher data scatter observed for the TiN coating, DLC was chosen as the reference material to be certified. One thousand samples were produced, as well as qualified styli to carry out the certification campaign, including homogeneity and stability testing. Nine independent laboratories were involved in the certification exercise, and the data were statistically analysed to obtain the certified critical load values and their uncertainty ranges. A certified reference material BCR-692 is available for verification purposes. This presents three repeatable failure events at certified critical load intervals and can provide a good indication of overall scratch-test instrument performance, including stylus condition and calibration. It is also useful as a diagnostic tool, providing a means of sensitive monitoring of machine and stylus performance over extended periods. Considerable improvement of the quality of scratch styli was achieved by the strict control of all manufacturing steps.
Das Projekt KONTRAST adressiert die Qualitätskontrolle (QC) zur Erfassung nano- und mikroskaliger Belegung/Degradation mittels abbildender Ellipsometrie (IE). Das BAM-Teilvorhaben beinhaltet das Screening von Benchmark-Materialsystemen und die Validierung von Messstrategien. Im Ergebnis erfolgte eine Fokussierung auf das im Vergleich zur off Null Ellipsometrie (ONE) aussichtereichere Verfahren der referenzkompensierten Ellipsometrie(RKE), das marktstrategisch in RSE (referenced spectral ellipsometry) umbenannt wurde. Alle Materialsysteme der BAM-Unterauftragnehmer konnten mit IE visualisiert werden, mit dem RSE-System in wesentlich kürzeren Zeiten, auf größeren Flächen, bei vergleichbarer Empfindlichkeit und Auflösung, Komplementärverfahren waren für den schnellen Nachweis nano- und mikroskaliger Belegung nicht konkurrenzfähig, wobei zusätzliche Materialsysteme mit niedrigem Kontrast (SnO:Ni auf Glas bzw. Cr auf Chromstahl) in der BAM hergestellt wurden. Die öffentliche Präsentation des RSE-Prototyps erfolgte auf der ICSE-7 2016 mit der Publikation 2017 in Applied Surface Science.
Airborne ultrasonic inspection is performed in through transmission, where the test piece (e.g. adhesive joint or polymer-based composite plate) is placed between the transmitter and the receiver. However, many structures with difficult shapes allow only one-sided inspection. The strong reflection of the signal from the surface overshadows the signals from the inside, so that broadband pulses are required. Thermoacoustic transmission, where the thermal energy of an electrically heated electrode is transformed into the acoustic energy of an ultrasonic wave, opens the possibility to excite broadband pulses and thus to inspect objects with one-sided access.
We present various thermoacoustic transducers consisting of an electrically conductive film on a solid substrate. The first type of transducer is a transmitter with an indium-tin-oxide electrode on a glass substrate combined with a laser Doppler vibrometer as a receiver. The second type of transducer combines thermoacoustic transmission and piezoelectric reception, having a titanium electrode as a transmitter deposited onto charged cellular polypropylene serving as a piezoelectric receiver.
Using a focusing thermoacoustic transmitter and a separate cellular polypropylene receiver, a through-transmission inspection of a 4 mm thick CFRP test piece with inserts as small as 1 mm was performed. The same emitter and a laser vibrometer as a receiver were used for a one-sided inspection of a Plexiglas block with a cross hole at 15 mm depth. A twin probe consisting of a thermoacoustic transmitter on a cellular polypropylene receiver was applied to a profile measurement on a step wedge with flat bottom holes. The smallest detected diameter of a flat bottom hole was 1 mm. Sound pressure level above 140dB was achieved with each of these transmitters. Thermoacoustic transmitters enable a step towards one-sided air-coupled ultrasonic inspection.
Owing primarily to speed, low cost and ease of use relative to competing surface analysis techniques, glow discharge spectrometry (GDS) has become an economically important depth profiling method for certain niche industries in Europe and Japan. For the industrial application of this method, layered certified reference materials (CRMs) are needed to ensure accuracy, as well as comparability between individual users. A survey of existing CRMs has been conducted to evaluate the availability of layered CRMs with appropriate characteristics. No materials with the desirable characteristics necessary for efficient implementation were found. These results indicate a need for the production of new layered CRMs. The survey was conducted by an advisory group assembled as part of the activities of the Glow Discharge Spectrometry Subcommittee (ISO TC201/SC8) associated with the ISO Technical Committee on Surface Chemical Analysis (ISO TC201).
In this study, thickness related changes of the optical properties of doped tin oxide were studied. Two different sets of samples were prepared. The first set was doped with iron or nickel on silicon substrate with thicknesses of 29–56 nm, the second was iron doped on gold/glass substrate with 1.6–6.3 nm. The optical constants were determined by using spectral ellipsometry (SE) followed by modelling of the dielectric function with an oscillator model using Gaussian peaks. The analysis of the optical constants shows a dependence of the refraction and the absorption on the thickness of the doped tin oxide coating. In addition to the tin oxide absorption in the UV, one additional absorption peak was found in the near-IR/red which is related to plasmonic effects due to the doping. This peak shifts from the near-IR to the red part of the visible spectrum and becomes stronger by reducing the thickness, probably due to the formation of metal nanoparticles in this layer. These results were found for two different sets of samples by using the same optical model. Afterwards the second sample set was tested in the Surface Plasmon Resonance Enhanced Ellipsometric (SPREE) gas measurement with CO gas. It was found that the thickness has significant influence on the sensitivity and thus the adsorption of the CO gas. By increasing the thickness from 1.6 nm to 5.1 nm, the sensing ability is enhanced due to a higher coverage of the surface with the over coating. This is explained by the high affinity of CO molecules to the incorporated Fe-nanoparticles in the tin oxide coating. By increasing the thickness further to 6.3 nm, the sensing ability drops because the layer disturbs the SPR sensing effect too much.
Coatings deposited by magnetron co-sputtering from a single RF magnetron with a ceramic SnO2 target with iron inset in argon plasma were studied. The mass spectra of the process identified Sn+ and SnO+ species as the dominant species sputtered from the target, but no SnO2+ species were detected. The dominant positive ions in argon plasma are Ar+ species. The only detected negative ions were O-. Sputtered neutral tin related species were not detected. Iron related species were also not detected because their concentration is below the detection limit.
The concentration of iron dopant in the tin oxide coatings was controlled by the RF bias applied on the substrate holder while the discharge pressure also has some influence. The iron concentration was in the range from 0.9 at.% up to 19 at.% increasing with the substrate bias while the sheet resistivity decreases. The stoichiometry ratio of O/(Sn + Fe) in the coatings increased from 1.7 up to 2 in dependence on the substrate bias from floating bias (- 5 V) up to - 120 V of RF self-bias, respectively. The tin in the coatings was mainly bonded in Sn4 + state and iron was mainly in Fe2 + state when other tin bonding states were detected only in a small amounts. Iron bonding states in contrary to elemental compositions of the coatings were not influenced by the RF bias applied on the substrate.
The coatings showed high transparency in the visible spectral range. However, an increased metallic behavior could be detected by using a higher RF bias for the deposition. The X-ray diffraction patterns and electron microscopy pictures made on the coatings confirmed the presence of an amorphous phase.
Mit der Zentrifugentechnologie ist seit einigen Jahren ein neuartiges Mehr-Proben-Prüf-verfahren auf dem Markt etabliert, welches die klassische Zugprüfung in den Trommelrotor einer Tischzentrifuge überträgt. In der Beanspruchung auf Zug ist die Prüfung der Verbundfestigkeit seit 2017 nach DIN EN ISO/IEC 17025 akkreditiert, wobei die Verbundfestigkeit von Klebungen direkt bestimmt wird und in Abhängigkeit von den Versagensformen Rückschlüsse auf die Klebfestigkeit von Klebstoffen/Klebebändern oder die Haftfestigkeit von Beschichtungen gezogen werden können.
Bei der zerstörenden Beanspruchung auf Zug ist zu beachten, dass es sich bei der Verbundfestigkeit um eine Systemeigenschaft handelt, d.h. nicht nur die chemischen und topografischen Oberflächeneigenschaften, sondern auch die plasto-elastischen Volumeneigenschaften des Klebstoffes und der Fügeteile haben Einfluss auf die ermittelten Kennwerte. Dabei ist eine qualitative Bestimmung der Versagensformen und Bruchbilder nach DIN EN ISO 10365 zwingend erforderlich, um eine Aussage über die Art des Versagens treffen zu können.
Mit der Erweiterung der Zentrifugentechnologie um Beanspruchungen auf Druck wurde dann der Nachweis erbracht, dass auch die klassische Härteprüfung in einer Zentrifuge als Mehr-Proben-Prüfung durchgeführt werden kann. Im Verbundvorhaben QUO VADIS PLUS werden derzeit invasive Beanspruchungen auf Druck zur Bestimmung der Härte von Materialien, der Kompressibilität von Metallschäumen sowie der Kompaktierbarkeit von Pulvern untersucht, was das Anwendungspotential der Zentrifugentechnologie nochmals erweitert. Dazu gehören auch kombinierte Beanspruchungen wie Zug-Scher- und Druck-Scher-Prüfungen.
Die Verbundfestigkeit von CFK-Platten in Abhängigkeit der Beanspruchungsart (Zug vs. Zug-Scher) bzw. der Faserorientierung (0°, 45°, 90°), die Klebfestigkeit von Klebstoffen bzw. Klebebändern auf unterschiedlichen Fügeteilwerkstoffen in Abhängigkeit von der Vorbehandlung, die Haftfestigkeit optischer Schichten auf Kunststoffen, die Bestimmung der Vickers-, Brinell- bzw. Kugeldruck-Härte sowie die Kompressibilität von metallischen Schäumen und Federn werden als ausgewählte Beispiele diskutiert.
The authors describe and interpret curvature-related changes to the ellipsometric readout. As model system for a concave curvature, a set of three spherical microscopic indents in silicon (100) of different sizes was prepared by instrumented indentation testing using a spherical indenter. For reference, these samples were characterized by AFM to reveal the topography of each structure. The concavelike indents were analyzed by Mueller-Matrix imaging ellipsometry to extract lateral intensity images of 12 elements of the Mueller-Matrix. As a result of the detailed analysis of the image elements m22, m23, and m14, it was possible to correlate intensity changes and symmetry properties to depolarization and cross polarization induced by the edge threshold and the curved surface of the indent.