Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (66) (entfernen)
Sprache
- Englisch (52)
- Deutsch (12)
- Französisch (1)
- Spanisch (1)
Schlagworte
- Ground vibration (12)
- Layered soil (6)
- Track-soil interaction (6)
- Railway track (5)
- Slab track (5)
- Train passage (5)
- Vehicle-track interaction (5)
- Force transfer (3)
- Hammer impact (3)
- Mitigation (3)
- Train-induced ground vibration (3)
- Wavenumber integrals (3)
- Axle sequence (2)
- Excitation forces (2)
- Field tests (2)
- Finite element method (2)
- Finite-element boundary-element method (2)
- Rail roughness (2)
- Railway (2)
- Rayleigh wave (2)
- Resonance (2)
- Static axle loads (2)
- Track vibration (2)
- Vehicle–track interaction (2)
- Wave propagation (2)
- Acoplamiento Método de los Elementos de Contorno-Método de los Elementos Finitos (1)
- Amplitude-distance law (1)
- Attenuation (1)
- Axle box measurements (1)
- Axle impulses (1)
- Axle-load spectra (1)
- Ballast mat (1)
- Ballast track (1)
- Base isolation (1)
- Beam dynamics (1)
- Beam-soil interaction (1)
- Bending waves (1)
- Blasting charge (1)
- Boundary Element Method-Finite Element Method coupling (1)
- Boundary element (1)
- Boundary element method (1)
- Bridge (1)
- Bridge resonance (1)
- Bridge vibration (1)
- Building response (1)
- Cancellation (1)
- Combined finite-element boundary-element method (1)
- Compliance function (1)
- Components of excitation (1)
- Continuous soil (1)
- Continuously inhomogeneous soils (1)
- Drop height (1)
- Dynamic axle loads (1)
- Dynamic loads (1)
- Dynamic pile and pile group stiffness (1)
- Dynamic soil-structure interaction (1)
- Elastic length (1)
- Elastic track elements (1)
- Emission (1)
- Environmental vibrations (1)
- Experimental verification (1)
- Explosion (1)
- Fequency domain (1)
- Filter effect of the soil (1)
- Filter effects (1)
- Finite element (1)
- Finite-element method (1)
- Flexible car body (1)
- Flexible plate (1)
- Flexible wheelset (1)
- Floating slab track (1)
- Foundations (1)
- Frequency-wavenumber method (1)
- Geometric trackbed irregularities (1)
- Geometric vehicle and track irregularities (1)
- High-speed trains (1)
- Insertion loss (1)
- Interacción dinámica suelo-estructura (1)
- Interaction (1)
- Interior load (1)
- Irregular soil (1)
- Irregularities (1)
- Irrégularités et forces roue-rail (1)
- Kinematic and inertial soil-pile-building (1)
- Layered soils (1)
- Mass drop (1)
- Material damping (1)
- Measured railway vibrations (1)
- Measurement campaigns (1)
- Measurements (1)
- Modal analysis (1)
- Monitoring (1)
- Moving load (1)
- Multi-beam model (1)
- Multi-beam track model (1)
- Multi-beam-on-support model (1)
- Obstacles (1)
- Ondes du sol multicouche (1)
- Parametric excitation (1)
- Pile bending stiffness (1)
- Pile foundation (1)
- Plate-soil interaction (1)
- Prediction (1)
- Predictions (1)
- Quasi-static response; (1)
- Rail pad (1)
- Railway bridge (1)
- Railway forces (1)
- Railway induced vibration (1)
- Railway measurement campaign (1)
- Railway track vibration (1)
- Random dynamics and vibrations (1)
- Random stiffness variation (1)
- Randomly heterogeneous soil (1)
- Reduction (1)
- Resonancia en edificaciones (1)
- Resonant response (1)
- Rigid vehicle model (1)
- Scattered axle impulses (1)
- Scattering (1)
- Scattering damping (1)
- Sleeper pad (1)
- Soil forces (1)
- Soil stiffness (1)
- Soil transfer function (1)
- Soil-building interaction (1)
- Stiffness (1)
- Stiffness variation (1)
- Target stiffness (1)
- Track (1)
- Track alignment (1)
- Track and vehicle irregularities (1)
- Track damage (1)
- Track damage monitoring (1)
- Track damage quantification (1)
- Track deflection (1)
- Track deformation (1)
- Track displacements (1)
- Track dynamic (1)
- Track filter (1)
- Track filtering (1)
- Track-soil and vehicle-track resonances (1)
- Train induced ground vibration (1)
- Train speed (1)
- Train-induced vibration (1)
- Trench (1)
- Tunnel (1)
- Tunnel-to-surface reduction (1)
- Under-sleeper pads (1)
- Varying track stiffness (1)
- Vehicle-track-soil interaction (1)
- Vibration (1)
- Vibration isolation (1)
- Vibration reduction (1)
- Wave attenuation (1)
- Wave excitation (1)
- Wavenumber domain (1)
- Wavenumber method (1)
- Wheel out-of-roundness (1)
- Wheel-rail irregularities and forces (1)
- Wheelset (1)
- Wheelset accelerations (1)
- Wind energy tower (1)
- layered soil (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (16)
- 7.2 Ingenieurbau (16)
The layered soil is calculated in the frequency wavenumber domain and the solutions for fixed or moving point or track loads follow as wavenumber integrals. The resulting point load solutions can be approximated by simple formula. Measurements yield the specific soil parameters for the theoretical or approximate solutions, but they can also directly provide the point-load solution (the transfer function of that site). A prediction method for the train-induced ground vibration has been developed, based on one of these site-specific transfer functions. The ground vibrations strongly depend on the regular and irregular inhomogeneity of the soil. The regular layering of the soil yields a cut-on and a resonance phenomenon, while the irregular inhomogeneity seems to be important for high-speed trains. The attenuations with the distance of the ground vibration, due to point-like excitations such as vibrator, hammer, or train-track excitations, were investigated and compared. All theoretical results were compared with measurements at conventional and high-speed railway lines, validating the approximate prediction method.
Excitation force spectra are necessary for a realistic prediction of railway-induced ground vibration. The excitation forces cause the ground vibration and they are themselves a result of irregularities passed by the train. The methods of the related analyses - the wavenumber integration for the wave propagation in homogeneous or layered soils, the combined finite-element boundary-element method for the vehicle-track-soil interaction - have already been presented and are the base for the advanced topic of this contribution. This contribution determines excitation force spectra of railway traffic by two completely different methods. The forward analysis starts with vehicle, track and soil irregularities, which are taken from literature and axle-box measurements, calculates the vehicle-track interaction and gets theoretical force spectra as the result. The second method is a backward analysis from the measured ground vibration of railway traffic. A calculated or measured transfer function of the soil is used to determine the excitation force spectrum of the train. A number of measurements of different soils and different trains with different speeds are analysed in that way. Forward and backward analysis yield the same approximate force spectra with values around 1 kN for each axle and third of octave.
The damage detection and repair control have become important tasks for ballast and slab tracks. Measurements which compare the damaged and the repaired status of the same track section at different times, or which compare a damaged and an intact track section at the same time, have been successfully performed at some sites in Germany. The loss of contact between the sleeper and the track plate, between the track plate and the base plate, and between the base plate and the base layer have been analysed. The soil properties of each site have been measured and have been used to establish realistic track-soil models. Theoretical results of the wavenumber domain and the finite-element boundary element method have been compared with the experimental results. The observed experimental and theoretical results, changes in the time histories of displacements and velocities due to train passages and in the transfer functions (receptances) due to hammer impacts, are encouraging that these measurements can be used to detect track damage.
Ground vibrations created by running high-speed trains at speeds between 100 and 320 km/h are calculated in detail using transfer functions to model the effects of the moving loads. These transfer functions for layered soils are obtained by integration in the wavenumber domain. The train-induced vibrations in a soil that is considered to consist of single layers of two slightly different soils are analysed for different excitations: for their spectra, attenuation laws and amplitude-speed relations. An important mid-frequency component is shifted through the cut-on region of the layered soil with an increase in the train speed. The cut-on frequency divides the response of the layered soil into a low-frequency low-amplitude range and a high-frequency high-amplitude range. This leads to completely different train speed dependencies for the two soil layers with strongly increasing amplitudes around the cut-on frequency and almost constant amplitudes beyond this frequency. All calculated results closely agree with ground vibration measurements at two corresponding sites, especially if the mid-frequency component is calculated by axle impulses.
Many measurements of train induced ground vibrations show high amplitudes for a certain mid-frequency range. This ground vibration component cannot be well explained by dynamic loads of the train. Many characteristics indicate that the axle impulses, which are scattered by an irregular soil, are the excitation. This new understanding of railway-induced ground vibration is verified by numerical analysis. The response of the regular homogeneous and irregular inhomogeneous soils has been calculated by the finite-element method in frequency domain. A specific superposition of the impulse responses has been invented including time shift, axle sequence, track filter and hanning filter. The superposition yields the quasi-static component of the ground vibration which is restricted to very low frequencies and to the close near-field of the track. In case of an irregular soil of which the stiffness varies randomly in space, the superposition yields a mid-frequency ground vibration component from the scattering of the axle impulses. The existence and the importance of this component can thus be demonstrated by the calculations. Some rules of the influence of distance, train speed, soil stiffness, strength and width of the stiffness variation have been derived from the calculations. Many measurements show the unique explanation of the mid-frequency ground vibration component by the scattered axle impulses.
Ground vibrations near railway lines are generated by the forces that are acting between wheel and rail. It seems to be a straight forward assumption that the vehicle dynamics are important for the level and the frequencies of the excitation forces. Different vehicle dynamics phenomena are analysed for their role in the excitation of ground vibrations: rigid body modes of the bogies, elastic (bending) modes of the car body, and elastic modes of the wheelset. The theoretical analyses use rigid body models, simplified elastic models, and detailed elastic models. Some of these problems are vehicle–track interaction problems where 3D finite‑element boundary‑element models have been used for the track and soil. It is shown that the rigid or flexible vehicle modes are well in the frequency range of ground vibrations (4 to 100 Hz). They have an influence on the excitation force but the additional forces are rather small and can be neglected in ground vibration prediction. The theoretical results are checked by experimental results of a simultaneous measurement of vehicle,
track, and ground vibrations.
Three measurement campaigns of train-induced ground vibrations are evaluated for the vehicle-track-soil interaction. Ground vibrations, track vibrations and vehicle vibrations have been measured for train passages and impulse excitation and compared with theoretical results.
The soil and the track-soil system are calculated by wavenumber integrals. The influence of the vehicle is introduced by a substructure method. By comparing theory and measurement the different components of excitation force and ground vibration can be analysed, the quasi-static excitation, track-alignment errors, the out-of-roundness of wheels, the wheel and rail roughness, and moreover, scattered axle impulses and ineffective high-frequency parts of the wheelset accelerations and forces.
This article deals with two topics of vehicle-track-soil interaction, the mitigation of railway induced ground vibration by soft track elements, and the identification of track damage. Theoretical results have been achieved by a combined finite-element boundary-element method (FEBEM). The theoretical results are confronted with measurements at four sites. Improved mitigation effects have been found for soft rail pads under heavy sleepers. The insertion loss, however, can be too optimistic if a strong vehicle track resonance occurs for the un-isolated reference track. Two measurement sites show this strong vehicle-track resonance at about 80 Hz, which has been approximated by using the results of a wide parameter study including the rail pad, ballast, and soil stiffness, as well as the ballast model and the soil layering. – The detection of slab track damage is mainly based on the differences of the receptance or compliance functions. Theoretical results have been confirmed by measurements at one site where a loss of contact between track plate and base layer was visible. Measurements at a second site with a hidden damage have been compared with the theoretical results of a loose sleeper. The differences between intact (or repaired) and damaged tracks are strong enough to encourage the further development of this method for the identification of track damages.
The vibrations of soil and foundations are demonstrated for different types of loading. Train-induced ground vibrations are studied in a measurement campaign where a test train has run with regularly varied speeds. The measured train-induced soil vibration at 2 to 100 m distance from the track is compared with the wave propagation due to hammer excitation and with the theoretical wave field. The strong influence of the soil and the train speed on the amplitudes and frequencies of the vibration has been analysed for passages of the locomotive and the carriages. - The generation of ground vibration by strong explosions has been studied on a large testing area with sandy soil. The propagating waves were measured in a regular grid of measuring points in 10 to 1000 m. Therefore, the dominance of certain waves at certain distances and the changes of compressional waves and Rayleigh waves could clearly be observed. The results are compared with impulse hammer measurements in the range of 5 to 50 m. - A drop test facility has been built on the testing area of the Federal Institute of Materials Research and Testing (BAM). Heavy masses (containers) of up to 200 t can be dropped from 10 m height on a big reinforced concrete foundation. The foundation was instrumented by accelerometers, strain gauges and pressure cells to give information about the loading condition and by geophones to measure the vibration of the surrounding soil and building. Both excitation processes, the release of the mass and the impact, produce high vibration amplitudes. On a smaller drop foundation, the influence of the drop height and the target stiffness has been studied more systematically.
A method is presented which allows to calculate the wave-field in a homogeneous or layered soil in case of a dynamic interior load. The wave propagation along the surface, the distribution of the response over the depth, the horizontal propagation at different depths and the vertical downward propagation are shown and compared with the simpler surface solution of the half-space and the interior solution of the full-space. The complete wave-field (Green's function) is applied to the dynamic behaviour of piles and pile groups by use of a boundary element formulation. The stiffness, damping and – typically for piles – mass of different groups of piles are presented. Different group effects occur for lines, circles, grids, parallels and crosses of piles, which can be regarded as oscillations around average values. Moreover, the piles and pile groups behave almost like a damper for most of the frequencies. A building on a pile group that is excited by ground vibration due to surface or interior loads shows a reduction of the wave-field due to kinematic and inertial soil–building interaction effects. The results presented lead to simplified descriptions of the wave-field due to interior loads and of the soil–pile–building interaction which can be used for the prediction of technically induced vibration.
Die diskrete Stützung der Schiene auf Schwellen in regelmäßigem Abstand ergibt für den fahrenden Zug eine Parametererregung. Die Berechnung der parametererregten Schwingungen und der zugehörigen dynamischen Radlasten erfordert die Analyse des Gesamtsystems Fahrzeug-Fahrweg-Untergrund. Es wird eine Substrukturmethode vorgestellt, bei der Fahrzeug, Fahrweg und Untergrund jeweils mit geeigneten Methoden (Mehrkörperdynamik, Finite Elemente, Randelemente) berechnet werden. Das Verfahren wird auf eine Situation angewandt, die auch mehrfach experimentell untersucht wurde, die Hochgeschwindigkeitsversuchsfahrten des Intercity Experimental (ICE) auf der Neubaustrecke bei Würzburg. Es werden die Ergebnisse der Teilsysteme und des Gesamtsystems und schließlich die dynamische Radlast für verschiedene Fahrgeschwindigkeiten dargestellt. Die dynamische Radlast nimmt bei Steigerung der Fahrgeschwindigkeit bis 200 km/h zu, bleibt bei höheren Fahrgeschwindigkeiten jedoch ungefähr konstant. Eine ähnliche Tendenz wird bei den Erschütterungen in der Umgebung bemerkt. Mit den berechneten Radlasten werden die ICE-Vorbeifahrten sehr detailliert simuliert und die berechneten Erschütterungen mit den gemessenen verglichen. Es zeigt sich eine gute Übereinstimmung, so daß der wichtige Fahrgeschwindigkeitseffekt als theoretisch und experimentell abgesichert angesehen werden kann.