Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (134) (entfernen)
Sprache
- Deutsch (83)
- Englisch (46)
- Spanisch (4)
- Französisch (1)
Referierte Publikation
- nein (134)
Schlagworte
- Ground vibration (11)
- Bahnerschütterungen (6)
- Building vibration (4)
- Bodenerschütterungen (3)
- Erschütterungsminderung (3)
- Erschütterungsprognose (3)
- Amplituden-Abstands-Gesetz (2)
- Base isolation (2)
- Container loading (2)
- Dispersionsmessung (2)
- Drop test (2)
- Elastische Elemente (2)
- Elastische Gleiselemente (2)
- Emission (2)
- Erschütterungen (2)
- Foundation load (2)
- Gebäudeschwingungen (2)
- Hammer impact (2)
- Layered soil (2)
- Layered soils (2)
- Mitigation (2)
- Railways (2)
- Slab track (2)
- Train passage (2)
- Train passages (2)
- Train-induced ground vibration (2)
- Tunnel (2)
- Vehicle-track-soil interaction (2)
- Vibration measurements (2)
- Wellengeschwindigkeit (2)
- Zuganregung (2)
- ground vibration (2)
- mitigation (2)
- railway track (2)
- 2-span bridge (1)
- Achsimpulse (1)
- Amplituden-Abstands-Gesetze (1)
- Amplitudenabnahme (1)
- Apartment building (1)
- Attenuation (1)
- Axle box measurements (1)
- Axle impulses (1)
- Axle pulses (1)
- Axle-sequence spectrum (1)
- Bahngleis (1)
- Ballast track (1)
- Ballast tracks (1)
- Batiments (1)
- Bauwerk-Boden-Wechselwirkung (1)
- Bodeneigenschaften (1)
- Bodenschlitz (1)
- Bodensteifigkeit (1)
- Bodenübertragungsfunktion (1)
- Cars (1)
- Continuously inhomogeneous soils (1)
- Damage detection (1)
- Deckeneigenfrequenzen (1)
- Deckenresonanz (1)
- Deckenschwingungen (1)
- Deckenübertragung (1)
- Displacements (1)
- Doppler effect (1)
- Downburst (1)
- Dynamic testing (1)
- Dämpfung (1)
- Einfügungsdämmung (1)
- Eisenbahngleis (1)
- Elastische Gebäudelagerung (1)
- Elements elastiques (1)
- Erschütterungen im Fernfeld (1)
- Erschütterungsausbreitung (1)
- Erschütterungsemission (1)
- Erschütterungsimmission (1)
- Erschütterungsmessungen (1)
- Erschütterungstransmission (1)
- Erschütterungsursachen (1)
- Evaluation (1)
- Excitation forces (1)
- Fahrzeug-Fahrweg-Boden-Wechselwirkung (1)
- Filter effects (1)
- Finite element method (1)
- Finite element models (1)
- Finite-element boundary-element method (1)
- Flexibility (1)
- Floors (1)
- Footbridge (1)
- Foundations (1)
- Freight train (1)
- Frequency response function (1)
- Frequency-specific attenuation (1)
- Frequenzbereiche (1)
- Fundamentübertraung (1)
- Gebäudelagerung (1)
- Gebäudemodelle (1)
- Gebäudeschwingungen, Deckenschwingungen, Wellenausbreitung (1)
- Geometrie (1)
- Gleiströge (1)
- Ground vibration measurements (1)
- Halbraum (1)
- Hammer tests (1)
- High-rise buildings (1)
- High-speed train (1)
- High-speed trains (1)
- Homogener und geschichteter Halbraum (1)
- Immission (1)
- Impedanzmethode (1)
- Inertial interaction (1)
- Irregular ballast (1)
- Irregular soil (1)
- Irregularities (1)
- Kinematic interaction (1)
- Kraft auf den Boden (1)
- Measurement (1)
- Measurements (1)
- Minderung (1)
- Modal load spectrum (1)
- Modes and waves (1)
- Movin load test (1)
- Non-synoptic wind event (1)
- Normung (1)
- Office tower (1)
- Overhead transmission line (1)
- Passenger train (1)
- Pfahlnachgiebigkeiten (1)
- Pile bending stiffness (1)
- Pile foundation (1)
- Pile groups (1)
- Prediction (1)
- Prognose (1)
- Railbridge (1)
- Railway (1)
- Railway bridge (1)
- Railway measurement campaign (1)
- Railway tracks (1)
- Railway trafiic (1)
- Railway tunnel (1)
- Railway vibration (1)
- Randelementmethode (1)
- Randomly heterogeneous soil (1)
- Rayleighwellendispersion (1)
- Rechenmodelle (1)
- Rechenverfahren (1)
- Resonanzamplitude (1)
- Richtige Fahrzeugmasse (1)
- Scattering (1)
- Schienenfahrweg (1)
- Schienenfahrwege (1)
- Simple and fast prediction (1)
- Soil stiffness (1)
- Soil-building interaction (1)
- Soil-pile interaction (1)
- Soil-wall floor model (1)
- Spektralanalyse (1)
- Stockwerksschwingungen (1)
- Störgrößen (1)
- Surface line (1)
- Surface-tunnel reduction (1)
- Trace (1)
- Track damage (1)
- Track vibration (1)
- Train configuration (1)
- Train excitation (1)
- Train speed (1)
- Tran speed (1)
- Transfer fuction (1)
- Transmission (1)
- Tunnel line (1)
- Tunnelstrecke (1)
- Under-ballast plate (1)
- Varying soil stiffness (1)
- Varying track stiffness (1)
- Vehicle-track interaction (1)
- Vibration measurement (1)
- Vibrations dues aux trains (1)
- Vollraum (1)
- Wellenausbreitung (1)
- Wellenausbreitung in der Tiefe (1)
- Wellenfeldberechnung (1)
- Wind energy tower (1)
- Zuggeschwindigkeit (1)
- elastische Gebäudelagerungen (1)
- floor vibration (1)
- modal analysis (1)
- sleeper pads (1)
- track-soil interaction (1)
- undersleeper (1)
- wave analysis (1)
- zerstreute Achslastimpulse (1)
- Übertragungsfunktion (1)
- Übertragungsmatrizen (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (37)
- 7.2 Ingenieurbau (37)
Eingeladener Vortrag
- nein (134)
Measurements of ground and track vibrations have been performed at a high-speed line in northern Germany. Impacts on the track and the ground, and passages of different trains with different speeds on different tracks have been measured. Transfer functions of the soil are presented and approximated by theoretical soil models. By using these transfer functions, the measured ground vibration between 2 to 64 m distance from the track can be transformed into a load spectrum which can be used for predictions at other sites. The method is compared to the soil-dependent method of an emission spectrum at a certain distance (8 m for example). The influence of train type, speed and track type is discussed on the base of the different emission quantities and the original measurements. The strong influence of the track, ballast track and slab track, is analysed by a theoretical model in wavenumber domain. The response of the track to the passage of the static load is reduced by the stiffness of the slab, the deformation of the track as well as the impulse acting on the soil. Usually, the impulse on the soil should result in a slow quasi-static movement of the soil, slower at further distances. In a heterogeneous soil, however, the impulses from the static loads scatter and keep parts of the higher impulse frequency band. In this case the reduced impulse spectra of the slab track will yield reduced ground vibration in a certain frequency band. Additional (BAM and international) measurements will be used to discuss this and possible other explanations for the different ground vibration differences.
Three measurement campaigns of train-induced ground vibrations are evaluated for the vehicle-track-soil interaction. Ground vibrations, track vibrations and vehicle vibrations have been measured for train passages and impulse excitation and compared with theoretical results. The soil and the track-soil system are calculated by wavenumber integrals. The influence of the vehicle is introduced by a substructure method. By comparing theory and measurement the different components of excitation force and ground vibration can be analysed, the quasi-static excitation, track-alignment errors, the out-of-roundness of wheels, the wheel and rail roughness, and moreover, scattered axle impulses and ineffective high-frequency parts of the wheelset accelerations and Forces.
Two measurement campaigns of train-induced ground vibrations are evaluated for the vehicle-track-soil interaction. Ground vibrations, track vibrations and vehicle vibrations have been measured for train passages and impulse excitation and compared with theoretical results. The soil and the track-soil system are calculated by wavenumber integrals. The influence of the vehicle is introduced by a substructure method. By comparing theory and measurement the different components of excitation force and ground vibration can be analysed, the quasi-static excitation, track-alignment errors, the out-of-roundness of wheels, the wheel and rail roughness, and moreover, scattered axle impulses and ineffective high-frequency parts of the wheelset accelerations and forces.
The Federal Institute of Material Research and Testing has performed many impact tests from very small laboratory tests to very big “free-field” tests with heavy containers on stiff foundations. The first measurements have been done on a big foundation where it should be guaranteed that the foundation is rigid and the container is tested properly. Later on, a smaller drop test facility has been built on the ground inside an existing building. It had to be controlled by prediction and measurements that the drop test will not damage the building. Tests from different heights on soft, medium, and stiff targets have been done to find out rules which allow to identify acceptable and unacceptable drop tests. Later on, the biggest drop test facility has been built for masses up to 200 t. It was necessary for the design of the foundation to estimate the forces which oc-cur during the drop tests. In addititon, the acceptable tests should be selected and controlled by measurements where the impact duration is important. Dif-ferent sensors, accelerometers, accelerometers with mechanical filters, geo-phones (velocity transducers), strain gauges, and pressure cells have been ap-plied for these tasks. Signal transformations and model calculations have been used to check and understand the dynamic measurements. The simplest law is the conservation of the momentum which is a good approximation if the impact is short. If the soil under the foundation has an influence on the deceleration of the container, the maximum foundation velocity is lower than the simple esti-mation.
The resonances of railway bridges have often been analysed for short bridges under periodical high-speed trains, for simply supported one-span bridges, for the fundamental bridge mode, and by time-domain analyses. Many time-consuming calculations have been performed to establish simplified rules for standards. In this contribution, the passage of different (existing, new and hypothetic) trains over different bridges will be analysed in frequency domain by using three separated spectra with the purpose to get a better physical insight in the phenomena. At first, the excitation spectrum of the modal forces is built by the mode shape and the passage time of the train over the bridge. The second spectrum is the frequency response function of the bridge which include the modal frequency, damping and mass. The third part is the spectrum of the axle sequence of an arbitrary train which is not limited to periodical or specific (conventional, articulated, regular or standard) trains and which does not include any bridge parameters. The final solution in frequency domain is obtained as the product of these three complex, strongly varying spectra for the dominating bridge mode or in general as the sum of these products over all relevant bridge modes. The time domain solution is obtained via the inverse Fourier transform, and the resulting time histories have been successfully compared with some measurement results. The method is applied to the vertical and torsional modes of a mid-long 1-span bridge on elastomeric bearings under standard train speeds, and to a long multi-span integral bridge under long periodical freight trains. Different resonance and cancellation effects have been found for systematically varied train speeds according to the axle sequence of the whole train which is dominated by the two locomotives in that case. To be more specific, the first torsional mode of the mid-span bridge is excited for a train speed of 100 km/h whereas the second bending mode is excited for a train speed of 160 km/h. In both cases, the other mode is suppressed by the minima of the axle-distance spectra. In addition, the case of the German high-speed train ICE4 and the very high-speed hyperloop case will be discussed briefly. In general, it is shown that resonance effects are also worth to be studied for freight and passenger trains with lower speeds.
Train-induced ground vibrations – The emission and transmission from tunnel and surface lines
(2023)
Train-induced ground vibrations are quite different for tunnel and surface lines. The excitation of the track and ground vibration by the vehicle-track-soil interaction maybe influenced by the stiffer track support of the tunnel invert. The excited waves are propagating on a different path compared to the surface line. The wave propagation in the interior of the soil is calculated by a wavenumber integral in a similar way as the propagation along the surface and a general reduction of < 0.5 has been found. An additional reduction has been found because of the missing Rayleigh wave. The different excitation of tunnel lines is analysed theoretically by the combined finite-element boundary-element method and some results about the influencing tunnel and soil parameters will be shown. Measurements have been made at the Mühlberg-Tunnel in Germany. The vibrations of the train, the track and the soil have been measured simultaneously at the tunnel and a nearby surface line. Spectra will be shown for different train speeds between 60 and 160 km/h. A clear reduction effect for the tunnel line compared to the surface line has been observed in a specific (train-speed-dependent) frequency range. This agrees well with the observations of other research institutes. The mid-frequency tunnel-surface reduction seems to be a consequence of the stiffer track structure which leads to a wider distribution of the axle loads. Therefore, the axle impulses due to the train passage are longer and have a lower frequency content. This will have an effect on the ground vibrations at some distance which are present in case of an irregular transmission path through a ballast and soil with varying stiffness. A similar reduction effect can also be found for other track forms where the axle impulses are distributed on a longer track segment, for example slab tracks, tracks with under ballast plates, under ballast mats or under sleeper pads.
The contribution shows measurement examples of cars, floors, foundations, railway tracks, a footbridge, and a railbridge. Vibrations may include modes and waves. Namely in soil-structure interaction, modes are damped, shifted and prevented so that alternatives for the modal analysis are necessary: The approximation of the whole spectrum (flexibility function) and of the whole train passage (moving-load response).