Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (47) (entfernen)
Sprache
- Englisch (47) (entfernen)
Schlagworte
- Ground vibration (11)
- Finite-element boundary-element method (4)
- Layered soil (4)
- Railway track (4)
- Building vibration (3)
- Hammer impact (3)
- Slab track (3)
- Track-soil interaction (3)
- Vibration measurements (3)
- Container loading (2)
- Drop test (2)
- Field tests (2)
- Foundation load (2)
- Layered soils (2)
- Measurement (2)
- Mitigation (2)
- Soil properties (2)
- Soil-building interaction (2)
- Soil-wall-floor model (2)
- Train passage (2)
- Train speed (2)
- Train-induced ground vibration (2)
- Vehicle-track interaction (2)
- Vehicle-track-soil interaction (2)
- 1-D insertion loss (1)
- 2-span bridge (1)
- Achsfolgespektren (1)
- Amplitude-charge weight laws (1)
- Amplitude-distance laws (1)
- Apartment building (1)
- Assessment (1)
- Attenuation (1)
- Axle impulses (1)
- Axle loads (1)
- Axle sequence (1)
- Axle-sequence spectrum (1)
- Ballast track (1)
- Ballast tracks (1)
- Bauteile (1)
- Bauwerke (1)
- Boundary element method (1)
- Bridge resonance (1)
- Bridge track (1)
- Brücken (1)
- Column/wall resonance (1)
- Continuously inhomogeneous soils (1)
- Damping (1)
- Dispersion (1)
- Displacements (1)
- Dynamic testing (1)
- Evaluation (1)
- Excitation forces (1)
- Explicit Green´s functions (1)
- Explosion-induced ground vibrations (1)
- FEBEM and simplified methods (1)
- Filter effects (1)
- Finite element method (1)
- Finite element models (1)
- Floating slab track (1)
- Floor amplification (1)
- Floor resonance (1)
- Force transfer (1)
- Foundation reduction (1)
- Freight train (1)
- Ground vibration measurements (1)
- Hammer tests (1)
- High-Rise Building (1)
- High-speed train (1)
- Inertial Interaction (1)
- Irregular ballast (1)
- Irregular soil (1)
- Irregularities (1)
- Kinematic Interaction (1)
- Laboratory tests (1)
- Long-span bridge (1)
- MASW (1)
- Measurements (1)
- Mitigation measures (1)
- Modal force spectrum (1)
- Modalanalyse (1)
- Modes (1)
- Office building (1)
- Office tower (1)
- Passenger train (1)
- Pile Foundation (1)
- Pile bending stiffness (1)
- Pile foundation (1)
- Plate-soil interaction (1)
- Prediction of explosion induced ground and building vibration (1)
- Propagation from a tunnel (1)
- Radiation damping (1)
- Railway (1)
- Railway bridge (1)
- Railway induced ground vibration (1)
- Railway tracks (1)
- Railway tunnel (1)
- Railway vibration (1)
- Randomly heterogeneous soil (1)
- Residential building (1)
- SASW (1)
- SPAC (1)
- Scattering (1)
- Simple prediction (1)
- Soil stiffness (1)
- Soil-building resonance (1)
- Surface Foundation (1)
- Surface line (1)
- Surface-tunnel reduction (1)
- Track compliance (1)
- Track damage (1)
- Track damage monitoring (1)
- Track irregularities (1)
- Track vibration (1)
- Train passages (1)
- Transfer function (1)
- Tunnel track (1)
- Tunnel vibration (1)
- Tunnel-pile transfer (1)
- Under sleeper pads (1)
- Under-ballast plate (1)
- Varying stiffness (1)
- Vibration measurement (1)
- Vibration reduction (1)
- Wave excitation (1)
- Wave velocity (1)
- Wavenumber integrals (1)
- Waves (1)
- Wind energy tower (1)
- floor vibration (1)
- ground vibration (1)
- mitigation (1)
- modal analysis (1)
- railway track (1)
- track-soil interaction (1)
- undersleeper (1)
- wave analysis (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (18)
- 7.2 Ingenieurbau (18)
Simple and advanced boundary-element method for the soil and its application to railway dynamics
(2007)
Vehicle, track and ground vibration as well as their interaction are considered in a combined finite-element boundary-element (FEBEM) approach. The layered soil is calculated in frequency wavenumber domain and the solution for fixed or moving point or track loads follow as wavenumber integrals. The soil results from the measurements and the detailed models are approximated by simple formula which are used for the prediction of train-induced ground vibration. The influence of the track and the soil on the train induced ground vibration is analysed by the detailed models. The ground vibrations strongly depend on the regular and random inhomogeneity of the soil. The regular layering of the soil yields a cut-on and resonance phenomenon while the random inhomogeneity yields a scattering of the axle impulses which proved to be important for high-speed trains. The attenuation with distance of the ground vibration due to the point-like excitations such as vibrator or hammer excitations and the train-track excitation are investigated and compared. All theoretical results are compared with measurements at conventional and high-speed railway lines.
The attenuation of wave amplitudes is ruled by the planar, cylindrical or spherical geometry of the wave front (the geometric or power-law attenuation) but also by the damping of the soil (an exponential attenuation). Several low- and high-frequency filter effects are derived for the layering and the damping of the soil, for the moving static and the distributed train loads and for a homogeneous or randomly heterogeneous soil. Measurements of hammer- and train-induced vibrations at five sites have been analysed for these attenuation and filter effects. The measured attenuation with distance can be discribed by generalised power laws and some reasons will be discussed. The theoretical filter effects can well be found in the measurements.
Vibration measurements have many causes and many technical and natural sources. Problems can sometimes be solved by short-term measurements, but in many cases, a long-term measurement is necessary. In long-term measurements of days, weeks, months and even years, it is easy to collect a huge quantity of raw data, but at the end, the post-processing of these data can be exhausting (for example one-year vibration data of a wind energy tower). A software has been developed which con-sists of measuring and evaluation routines where the measuring routines can operate different meas-uring systems and different measuring cards. The main advantage of this software is the fact that the interesting evaluations can be integrated in the measuring process so that the characteristics of the vibration can be extracted without storing all the raw data. Only important time segments are stored, for example train passages. The overall concept of the software and the main evaluation routines will be described in some details. Examples of our measurement experience will illustrate the capabilities of the software. 1) Surveying construction work in nearby sensitive buildings (for example an old wind tunnel), including a stable alarm system and meaningful vibration limits. 2) Prediction of train-induced vibration for a planned building to prevent annoyance and to improve the building design. 3) Modal analysis and long term measurements of several single- or multi-span, concrete or steel bridges 4) Modal and wave analysis of coupled floors in a historical building (“Neues Palais” at Potsdam). 5) Soil properties of various measurement sites (different routines to evaluate the dispersion). Moreover, from many projects, amplitudes, frequencies, and attenuation laws have been collected and analysed for the different sources such as vibratory or impact pile driving and ground compaction, demolition work with different machines, blasting in quarries and in tunnel works, bomb and mine clearing.
A simple and fast prediction scheme is presented for train-induced ground and building vibrations. For the emission, finite-element boundary-element or multiple-beam-on-continuous-soil models of the track have been analysed and approximated by faster track-on-Winkler-soil models. The vehicle-track interaction due to irregularities yields the excitation forces. For the transmission of waves in the soil, the wavenumber integral of the compliance of layered soils has been evaluated. The calculation time is reduced for the prediction by using the solution of a homogeneous half-space with a frequency-dependent wave velocity (the dispersion) of the soil. For the immision, many 2 and 3-dimenisonal finite-element building models have been investigated, and a good approximation has been established by a 1-dimensional soil-wall-floor model. In addition, the axle sequence of the train, the quasi-static and the “scattered” response of the soil, and the wave propagation from a tunnel to a pile foundation of a building have been included.