Filtern
Erscheinungsjahr
Dokumenttyp
Referierte Publikation
- ja (53) (entfernen)
Schlagworte
- Ground vibration (10)
- Track-soil interaction (5)
- Vehicle-track interaction (5)
- Layered soil (4)
- Railway track (4)
- Slab track (4)
- Train passage (4)
- Force transfer (3)
- Hammer impact (3)
- Mitigation (3)
- Railway (3)
- Axle impulses (2)
- Axle sequence (2)
- Field tests (2)
- Finite-element boundary-element method (2)
- Irregular soil (2)
- Rail roughness (2)
- Rayleigh wave (2)
- Resonance (2)
- Soil-building interaction (2)
- Static axle loads (2)
- Track vibration (2)
- Train-induced ground vibration (2)
- Vehicle–track interaction (2)
- Wavenumber integrals (2)
- Achsfolgespektren (1)
- Acoplamiento Método de los Elementos de Contorno-Método de los Elementos Finitos (1)
- Attenuation (1)
- Axle box measurements (1)
- Axle-load spectra (1)
- Ballast mat (1)
- Ballast track (1)
- Base isolation (1)
- Bauteile (1)
- Bauwerke (1)
- Beam dynamics (1)
- Beam-soil interaction (1)
- Bending waves (1)
- Boundary Element Method-Finite Element Method coupling (1)
- Boundary element (1)
- Bridge (1)
- Bridge resonance (1)
- Bridge vibration (1)
- Brücken (1)
- Cancellation (1)
- Compliance function (1)
- Continuous soil (1)
- Continuously inhomogeneous soils (1)
- Dynamic axle loads (1)
- Dynamic pile and pile group stiffness (1)
- Dynamic soil-structure interaction (1)
- Elastic length (1)
- Elastic track elements (1)
- Elastische Gebäudelagerung (1)
- Emission (1)
- Environmental vibrations (1)
- Excitation forces (1)
- Experimental verification (1)
- FEBEM and simplified methods (1)
- Fequency domain (1)
- Filter effects (1)
- Finite element (1)
- Finite-element method (1)
- Flexible plate (1)
- Floating slab track (1)
- Floor amplification (1)
- Foundation reduction (1)
- Foundations (1)
- Frequency-wavenumber method (1)
- Geometric trackbed irregularities (1)
- Geometric vehicle and track irregularities (1)
- High-speed trains (1)
- Insertion loss (1)
- Interacción dinámica suelo-estructura (1)
- Interaction (1)
- Interior load (1)
- Irregular ballast (1)
- Irregularities (1)
- Kinematic and inertial soil-pile-building (1)
- Laboratory tests (1)
- Layered soils (1)
- Material damping (1)
- Measured railway vibrations (1)
- Measurements (1)
- Modal analysis (1)
- Modalanalyse (1)
- Moving load (1)
- Multi-beam model (1)
- Multi-beam track model (1)
- Multi-beam-on-support model (1)
- Obstacles (1)
- Parametric excitation (1)
- Pile bending stiffness (1)
- Pile foundation (1)
- Plate-soil interaction (1)
- Prediction (1)
- Predictions (1)
- Quasi-static response; (1)
- Rail pad (1)
- Railway bridge (1)
- Railway forces (1)
- Railway measurement campaign (1)
- Railway track vibration (1)
- Random dynamics and vibrations (1)
- Random stiffness variation (1)
- Randomly heterogeneous soil (1)
- Rechenmodelle (1)
- Reduction (1)
- Resonancia en edificaciones (1)
- Resonant response (1)
- Scattered axle impulses (1)
- Scattering (1)
- Scattering damping (1)
- Sleeper pad (1)
- Soil forces (1)
- Soil stiffness (1)
- Soil transfer function (1)
- Stiffness (1)
- Stiffness variation (1)
- Track (1)
- Track alignment (1)
- Track deflection (1)
- Track deformation (1)
- Track displacements (1)
- Track dynamic (1)
- Track filter (1)
- Track filtering (1)
- Track-soil and vehicle-track resonances (1)
- Train induced ground vibration (1)
- Train-induced vibration (1)
- Trench (1)
- Tunnel (1)
- Tunnel-to-surface reduction (1)
- Under sleeper pads (1)
- Varying track stiffness (1)
- Vibration (1)
- Vibration isolation (1)
- Vibration reduction (1)
- Wave attenuation (1)
- Wave excitation (1)
- Wave propagation (1)
- Wavenumber domain (1)
- Wavenumber method (1)
- Wheel out-of-roundness (1)
- Wheelset (1)
- Wind energy tower (1)
- floor vibration (1)
- layered soil (1)
- modal analysis (1)
- wave analysis (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (14)
- 7.2 Ingenieurbau (14)
In the last three decades, the vibrations of many floors and bridges have been measured. The contribution shows some evaluation methods, experimental results and some modelling and theoretical results. Simple evaluation methods have been developed for single and coupled floors. Two coupled beams have been measured in good agreement with the theory. A more complex coupling model has been found for a large wooden floor in a castle consisting of six floor bays which correlates well with the measurements. Damaged and intact poles have been tested by their natural frequencies and damping values, and a fair correlation between the degree of damage and the shift of the frequency. Road bridges have been analysed in detail and some examples are presented. Railway bridges and trains are studied for resonant excitation. The risk of resonance can be estimated in frequency domain by using axle-sequence spectra of the train and the natural frequencies of the bridge. A measurement example shows the amplification, but even stronger the cancellation of the subsequent axle responses. Several high-speed trains and freight trains have been analysed for their potential resonance amplification.
Measurements on the vehicle-track interaction and the excitation of railway-induced ground vibration
(2017)
Two railway measurement campaigns have been performed in Germany and Switzerland which yield insight in the vehicle-track-soil interaction. The campaign in Germany has included simultaneous measurement of vehicle, track, and soil vibrations during train runs with 16, 25, 40, 63, 80, 100, 125, 140, 160 km/h, and impulse measurements of the passenger car, three track sections and the soil. Two ballast tracks, one on the soil surface and one on a concrete bridge, have been investigated as well as a slab track in a tunnel. Ten different sites in Switzerland have been measured for soil properties and train-induced ground vibrations, which allow to determine the excitation forces of the railway traffic. New axle-box measurements at some of the Swiss sites have been analysed to get further experimental evidence. All these measurements have been evaluated to characterize the excitation processes. Relations between vehicle vibration and ground vibration can be observed. The vehicle vibrations, namely the accelerations of the wheelsets, yield the dynamic forces due to the passage over the irregularities of the vehicle and the track. The ground vibrations are correlated to these dynamic forces to a certain extent. Some mid-frequency ground vibration amplitudes, however, are higher than expected from the dynamic excitation forces. The experimental observations can be explained by an irregular response to the passage of the static loads, that means the passage of the static loads over an irregular ballast or soil. This correct understanding of the excitation processes is important for the prediction as well as for the mitigation of railway induced ground vibrations.
A variety of isolation measures exists to reduce the vibration in the neighbourhood of railway lines. They can be roughly classified as elastic or stiffening systems. There are the following elastic elements, rail pads or resilient fixation systems between rail and sleeper, under sleeper pads or sleeper shoes under the sleepers, and ballast mats under the ballast. Stiffening systems (plates) are used as slab tracks, floating slab tracks, or mass-spring systems. In the EU project “Railway induced vibration abatement solutions (RIVAS)”, elastic under sleeper pads have been investigated. The dynamic behaviour of the track and the surrounding soil has been calculated by the combined finite-element boundary-element method in a systematic parameter study. It has been shown that the mitigation effect can be improved by soft under sleeper pads or by heavy sleepers. Consequently, such track elements (soft under sleeper pads and heavy sleepers) have been thoroughly investigated in laboratory tests to establish the static and dynamic parameters as well as their serviceability. Finally, field tests at and near railway tracks with and without under sleeper pads have been performed. To determine the reduction effect of the isolated track, the ground vibrations excited by trains or artificial sources have been measured. The soil properties at the different sites have also been measured so that the comparison of the isolated and un-isolated track can take into account possible differences of the soil parameters. The contribution shows how the different (numerical, laboratory and field) methods and results can be combined to achieve an improved mitigation solution with soft under sleeper pads and heavy sleepers for ballasted and slab tracks.
The attenuation of technically induced surface waves is studied theoretically and experimentally. In this paper, nineteen measurements of ground vibrations induced by eight different technical sources including road and rail traffic, vibratory and impulsive construction work or pile driving, explosions, hammer impulses and mass drops are described, and it is shown that the technically induced ground vibrations exhibit a power-law attenuation ν ~ r -q where the exponents q are in the range of 0.5 to 2.0 and depend on the source types. Comparisons performed demonstrate that the measured exponents are considerably higher than theoretically expected. Some potential effects on ground vibration attenuation are theoretically analyzed. The most important effect is due to the material or scattering damping. Each frequency component is attenuated exponentially as exp(-kr), but for a broad-band excitation, the sum of the exponential laws also yields a power law but with a high exponent. Additional effects are discussed, for example the dispersion of the Rayleigh wave due to soil layering, which yields an additional exponent of 0.5 in cases of impulsive loading.
Ground vibrations due to different technical sources are analysed in theory and experiment for the dispersion of Rayleigh waves and the admittance spectra. Both tasks are theoretically based on the same concept: The admittance function in frequencywavenumber domain yields the dispersion as its maxima, and the admittance function in space domain is obtained by integrating it over the wavenumbers. On the experimental side, many signal processing methods have been applied to many sites and have been developed by the authors in the last 35 years, i.e., time-domain methods, including the cross-correlation method, and frequency-domain methods such as the spectral analysis of surface waves with two or multiple sensors, the wavenumber-transform method, and the spatial autocorrelation method. All methods are presented by their basic formula and by at least one example site. Different sensor arrays and deterministic and stochastic sources have been tested for the spatial autocorrelation method and the wavenumber-transform method at several sites. In addition, all frequency-domain methods are presented for a specific layered site comparing their quality. The evaluated dispersion curves are very similar, but a somewhat higher frequency range has been found for the fastest method, i.e., the multi-sensor spectral-analysis-of-surface-waves method. The theoretical solutions have been used for the inversion of the measured dispersion to the soil profile of the specific layered soil. The theoretical soil model has subsequently been used to predict the ground vibration spectra of hammer and railway excitation that exhibit a good agreement with the corresponding measurements. Thus, the contribution shows the benefit of active and passive seismic methods for the prediction of railway vibration, including a new version of the spatial autocorrelation method for technical vibrations. On the other hand, technical and namely railway vibrations are considered a seismic source for the exploration of near surface soils.
Die Grundidee einer Schwingungsminderung ist es eine tiefe Eigenfrequenz der Struktur zu erreichen, so dass höhere Frequenzen abgemindert werden. Das gilt für die Minderung an der Quelle, zum Beispiel einem Eisenbahngleis, und für die Minderung am Empfänger, dem Gebäude. Die Eigenfrequenz ermittelt man aus dem Verhältnis der Auflagersteifigkeit und der Masse. Wie ist die Masse bei einem Gebäude zu wählen? Und wie ist die Untergrundsteifigkeit zu berücksichtigen? Als Referenzsituation ohne Minderungsmaßnahme? Der Beitrag bringt Rechenergebnisse zu abgefederten Gebäuden mit einfachen und komplexen (FE-) Modellen, Mess- und Rechenergebnisse zur Schwingungsübertragung von unabgefederten Gebäuden. Es wird der Einfluss der Abstimmfrequenz, der Bodensteifigkeit und der „starren“ Gebäudemasse untersucht. Die komplexen Gebäudemodelle erlauben, neben der Berechnung einer elastischen Gebäudelagerung, auch die Variation von Gebäudeparametern zur Reduktion der Deckenschwingungen. Den Ergebnissen bei der Erschütterungs-übertragung in Gebäude werden zwei ähnliche Beispiele zur elastischen Maschinenlagerung und zur elastischen Gleislagerung gegenübergestellt.