Filtern
Erscheinungsjahr
- 2008 (8) (entfernen)
Dokumenttyp
Schlagworte
- Materialgeschichtliches (2)
- Backscatter (1)
- Bauholz (1)
- Computertomography (1)
- Digitale Radiographie vor Ort (1)
- Fibre composites (1)
- Flash generator (1)
- Holzfäule (1)
- Holzschäden (1)
- Laminography (1)
Eingeladener Vortrag
- nein (3)
Wood is the material that has accompanied the whole development of mankind in various applications, for manufacturing tools and weapons, for buildings and constructions and also as fuel. It has various appearances and is subjected to decomposing changes, so there are sufficient arguments for non-destructive testing of wooden objects in the same way as is common practice with other technologically used materials. However, even today wood is rarely tested. Moreover, artefacts of cultural heritage containing wood are rare and delicate, so dismantling these for studying purposes is undesirable. Radiological inspection technologies are the methods of choice to provide a non-destructive insight. Interrogations of a specimen with various kinds of radiation provide different answers about their internal structures. High-quality detailed images are achievable with X-rays or gamma radiation in cases where heavy metals or other dense materials are not involved. Neutrons behave complementarily; they are avidly absorbed by light elements such as hydrogen on the one hand and yet are capable of easily penetrating heavy metals on the other. This provides an alternative for X-ray radiography and tomography when material characteristics are of primary interest rather than structural details, or when shielding with plates or sleeves of heavy metal severely impedes inspections with X-ray or gamma radiation technologies. However, due to the moderating effect of wooden samples it is essential to use fast neutrons for radiography and tomography of voluminous objects. Some typical examples described here will show the difference between neutron and X-ray photon-based radiographic technologies.
"Um Holz auf Schäden hin zu untersuchen, müssen Verfahren auch vor Ort durchführbar sein. Mit Hilfe von mobilen, tragbaren Röntgenblitzröhren und digitalen Radiografiesystemen ist dies möglich. Um die Anzeichen einer Schädigung im digitalen Röntgenbild zu erkennen, ist eine Bildbearbeitung notwendig. Hier werden die Ergebnisse von Röntgenuntersuchungen mit Blitzgeneratoren, einem digitalen Radiografiesystem auf Halbleiterbasis und einer automatisch ablaufenden Bildbearbeitung vorgestellt. Bei den Beispielen handelt es sich jeweils um eine Probe aus Nadelholz und Laubholz, die von geschädigten Bäumen und Bauwerken entnommen wurden. Dem einbaufrischen Bauteil wurden künstliche Strukturen eingebracht. Die aufgeführten Beispiele demonstrieren, wie mit transportablen Geräten innere Schäden im Holz zerstörungsfrei aufgespürt werden können." (gekürztes Autorenreferat) Schadstellen und Fäulnis in trockenen Bäumen und in trockenen Holzbalken lassen sich mit den Mitteln der digitalen Radiographie darstellen. Diese Aufnahmetechniken kommen mit geringeren Strahlendosen als bei einer herkömmlichen Filmbelichtung aus. Die Verwendung digitaler Detektoren, kombiniert mit einer PC-basierten Bildbearbeitung, erlaubt eine schnelle Auswertung vor Ort. Die automatisierte Bildfilterung gestattet eine zügige Durchführung auch ohne tiefgehende Kenntnisse in der digitalen Bildauswertung. Diese spielt hier eine tragende Rolle, wobei die in den Rohbilddaten enthaltenen relevanten Informationen gegenüber denjenigen, die im Augenblick weniger oder nicht interessieren, hervorgehoben werden. Risse werden längs der Einstrahlrichtung gut sichtbar, senkrecht dazu verlaufende allerdings wegen mangelnder Kontrastunterschiede nicht. An dieser Stelle bietet sich die Ultraschall-Echotechnik als komplementäres Verfahren an.
Digital detectors such as phosphor imaging plates (IP) and digital detector arrays (DDA) allow radiographic inspection with higher efficiency and improved image quality in comparison to the classic film technique. Mobile X-ray flash tubes are used routinely for veterinarian and security applications. New high sensetive IPs and DDAs enable to apply them for inspection of light materials with low X-ray attenuation as in aluminium, plastics and composites. A versatile computed tompgraphy (CT) system was developed for in situ inspection of large aircraft components under production conditions. A gate based planar computed tomograph wsa developed and testes for inspection of integrety of the stringer incorporation. Successful test trials were performed to prove the detection rate of cracks in embedded stringers. Honey comb structures of aircrafts have to be inspected for water inclusions during in-service inspections. Thermography is a powerful method for in house inspections when variations in temperature caused e. g. by sunshine can be excluded. A new X-ray diaphragm was developed for mobile back scatter measurements of large components. This method is insensitive to heat alterations in the field and thus can be applied also outdoors.