Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (67)
- Beitrag zu einem Tagungsband (40)
- Posterpräsentation (23)
- Zeitschriftenartikel (21)
- Beitrag zu einem Sammelband (11)
Schlagworte
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (67)
EFNDT working group 5 'NDT technology for public security and safety', two areas with the same aim
(2014)
It is a quite common and understandable wish to make the world a safer place. This entails both freedom from danger, and thus encompasses both, safety and security. However, it is a trivial fact that public security and technical safety are commitments to distinct social entities that might be quite understandable due to the various kinds of threats. On the other hand, it is a common justifiable interest to have effective methodologies to detect them in time, i.e., before something disastrous might happen. It is rather obvious that particularly non-destructive inspection technologies, namely radiological methods, are applied in both areas. As a logical consequence, sharing the technical knowledge and experiences could be of benefit for both of them. However, the different areas of activities cleave the information exchange between them. In order to overcome this gap, the EFNDT Working Group 5 'NDT Technology for Public Security and Safety' (EFNDT WG 5) has taken an initiative to bring together actors of both areas of activities, symbolized as building a 'bridge'. The activities of the EFNDT WG 5 range from identifying features exhibiting certain threats that are detectable with available NDT technologies, adapting and improving them according to their specified applications and to search for alternative technologies or ways of applications where deemed to be applicable. Successful exchanges of information and experiences have been achieved in recent workshops, where also new ideas have been raised for future common projects. This kind of work is far from being completed; it is more or less at its beginning. In future workshops it is intended to follow up these ideas and to pave the way for future common interdisciplinary projects. Therefore, all groups involved in such projects are welcome, not only researchers and NDT-specialists, but also all endusers of the respective technologies as well as theoreticians for risk assessment, performance evaluation, modelling, statistics etc. All the addressed areas are deemed to play an important role in making the world a safer place, cooperatively.
EFNDT Working Group 5 "NDT Technology for Public Security and Safety", two areas with the same aim
(2014)
The existence of some 100 million active mines threatens human life and curtails substantially the economic base in over 70 countries. Humanitarian demining is tedious and it currently only employs metal detectors, prodders, dogs and armoured mechanical vehicles.
Achieving a world free of mines within a period of 10 years as stipulated in international treaties requires safer and more efficient technologies. In response to this challenge the Working Group 5 of the European Federation for Non-Destructive Testing (EFNDT WG5) was founded in Berlin in March 1999. The subject of this working group now consisting of 50 members from 17 countries is the detection of antipersonnel mines (APMD). The basic idea was to investigate existing NDT methods into their ability to aid mine detection. The scope of activities ranged from collecting available information, setting up links to related organisation, defining terminology and standards to selecting dedicated research projects. Since some of these tasks are already conducted by other organisations on an European and international level the attention of the working group has been focused mainly on two R&D areas and on reliability assessment studies. Otherwise, EFNDT WG5 APMD nevertheless remains open to novel approaches in mine detection. Aim of all activities is to provide deminers with safer and more efficient tools than merely with prodders and metal detectors currently used for their dangerous task.
Some of the most perfidious remnants of war are mines threatening not
only combating parties but also innocent civilian lives. Moreover, they make large
areas inaccessible that otherwise could be used economically. This threat exists
even long after cessation of hostile actions. Up to now, the range of tools for humanitarian
demining is confined to mine detection dogs, metal detectors, prodders,
manual excavation tools and mechanical clearance machines (flails and tillers). In
1999, this gave rise for the Board of Directors of the EFNDT to suggest whether
detection methods commonly applied may also be helpful in detecting mines and the
like. It was proposed to transfer existing NDT technology to these areas. As a consequence,
Working Group 5 Antipersonnel Landmine Detection (APLD) was
founded to support this concept. As soon as the group became aware of the fact that
mines were encountered not only in the soil but also elsewhere the name was
changed to Antipersonnel Mine Detection (APMD).
It now is becoming more and more obvious that vicious devises such as mines
and bombs threatening lives everywhere represent an increasing risk to everybody.
In contrast, the particular interest in antipersonnel mine detection is decreasing in
favour of general security and safety. However, all these problems have in common
that such devices need to be detected in time, i.e. before they become effective. This
gives reason to extend the scope of the existing Working Group 5 accordingly. It is
of advantage to exchange existing knowledge and there is a chance to keep the
awareness of the mine problem alive by this way.
EFNDT Marine Forum
(2011)
Die Arbeitsgruppe 5 'Public Security and Safety NDT Technologies
(PSSndtT)' der Europäischen Föderation für Zerstörungsfreie Prüfung (EFNDT) hat
sich zur Aufgabe gestellt, vorhandene ZfP-Techniken darauf hin zu überprüfen, ob
und inwieweit sie für einen Einsatz im Bereich der öffentlichen Sicherheit
('Security') geeignet sind. Ausgangspunkt war die Suche nach Antipersonenminen
in ehemaligen Kriegsgebieten. Die zunehmende Bedrohung der Allgemeinheit
durch den Terrorismus veranlasste den EFNDT, ZfP-Anwendungen auf die
allgemeine öffentliche Sicherheit auszuweiten. Der Blick auf die Praxis und die Erfahrungen
in der ZfP kann neue Wege eröffnen und erspart mögliche parallele Eigenentwicklungen.
Umgekehrt wird man immer auch vom praktischen Feldeinsatz
mobiler Inspektionstechnik lernen, besonders unter erschwerten Einsatzbedingungen
in Bezug auf erschwerte Zugänglichkeit und eingeschränkt verfügbare Zeitrahmen.
Es wird über die bisherigen Aktivitäten und Perspektiven berichtet.
Ein gemeinsames Anliegen sowohl der technischen Sicherheit im Sinne von
'Safety' als auch der öffentlichen im Sinne von 'Security' als Schutz vor Anschlägen
und Verbrechen ist die Einschätzung bzw. die Bewertung vorbeugender Maßnahmen,
die der rechtzeitigen Erkennung einer Bedrohung dienen. An einem Beispiel
soll gezeigt werden, wie umgekehrt die ZfP auch von Konzepten zur Maßnahmenbewertung
in Sicherheitskontrollen profitieren könnte, besonders dann, wenn
eine einzelne Methode nicht hinreicht, um ein drohendes Schadensereignis zu erkennen.
Für die öffentliche Sicherheit wird gesorgt, indem Gefahren rechtzeitig entdeckt werden. Deren Ursprung kann im technischen oder menschlichen Versagen liegen, womit im englischen Sprachraum zwischen 'Safety' und 'Security' unterschieden wird. Hinsichtlich der Folgen verschwimmt aber dieser Unterschied, obwohl für deren Verhinderung unterschiedliche Zuständigkeiten existieren. Bezüglich des gemeinsamen Interesses und auch überlappender Methoden und Vorgehensweisen würden beide Seiten gewinnen können, wenn es eine Brücke zwischen ihnen gäbe. Eine solche zu schaffen hat sich die EFNDT Arbeitsgruppe (Working Group) 5 zur Aufgabe gestellt. Gestaltet werden soll sie durch gemeinsame Veranstaltungen und Seminaren, die zur Bildung von Konsortien und der Durchführung gemeinsamer Projekte führen sollen.
The detection of defects in aircraft components or parts of a power plant or mines in the ground is connected with the task to distinguish between signals caused be the item searched for and noisy signals from other sources. The reliability of the system is the better the better the system is in detecting the wanted signal and avoiding false alarms caused by noise. It is usual to measure the reliability of diagnostic systems in terms of ROC-curves (Re-ceiver Operating Characteristics) and POD-curves (Probability of Detec-tion). The ROC curves describe the POD versus Probability of False Alarm with growing system sensitivity along the curve. POD curves describe the Probability of Detection for a fixed sensitivity for a variation of item sizes or depths. Reliability of the whole system is always a composition of the physics
and technique, application influences and the human factors. For the scien-tific understanding and possibilities of improvement, decomposition accord-ing to a modular model is helpful. The authors present their experiences with the reliability evaluation of metal detectors for humanitarian demining and an NDT system of mechanized ultrasonic phased array testing of copper welds. The special concern in demining is the influence of soil types, detec-tors and the experiences of human beings.
Demonstration von Beispielen zur Bildverarbeitung von radiologischen Aufnahmen (Speicherfolien)
(2002)
The objects of this investigation were sculptures taken from a ca. three hundred years old baroque epitaph of a church in Tonning, a town in Northern Germany. Around 1900 it was found in a disastrous state heavily damaged by wood-worm. At that time, the whole artwork was treated with the tar extract carbolineum as a remedy. Nowadays, this substance has been identified as carcinogenic, and its presence can be perceived by its stench and visually at certain spots on the surface where it has penetrated the covering paint.
A gold-painted sculpture of a massive wooden skull was interrogated with X-rays and fast neutrons to investigate the internal distribution of the carbolineum. The X-ray tomography, with its excellent spatial resolution revealed galleries left over from the worm infestation in the outer areas and cracks in the central region. The golden color coating appeared as a thick and dense layer. In comparison the tomography with fast neutrons, though being of lower resolution and yet unresolved artefacts revealed sections of slightly different densities in the bulk of the wood. These differences we attribute to the differences in the distribution of the impregnant in the wood, visible due to its higher hydrogen content making it less transparent for neutrons.
Bildbearbeitung
(2002)
Bildbearbeitung
(2002)
Safety and security both entail freedom from danger, i.e. unacceptable risk, whatever the cause might be. This
entails an understanding of the term 'risk' that is broadly used in areas such as economics, health, insurance etc.
According a rather popular definition used in the economical sciences for a long time (KNIGHT), risk has a lot
in common with uncertainty while the former is regarded quantifiable and the latter one is not. However, it has
to be taken into account that there are other understandings of 'uncertainty'. Particularly encountering rare
events never experienced before and recent contemporary definitions are weakening Knightfs differentiation.
This is reflected in some recent standard definitions. Attempts have been made to define a risk as common as
possible covering not only societal, ecological and financial areas but also natural and technical, ones. This is of
particular concern in non-destructive testing. This raises the question how far this can be achieved in a common
understanding, i.e. the discussion on this term seems not at all finished yet.
It is a common ambition to lower the risk by several actions including detection technologies. This entails that a
risk could be estimated somehow. The existence of numerous approaches indicates the complexity of this question.
The EFNDT (European Federation for Non-Destructive Testing) Working Group 5 took a commitment
also to tackle this central aspect of safety and security in its understanding as a bridging forum between these
two areas.
The baroque epitaph Reyer (1704) at the St. Laurentius church in Tönning was treated with carbolineum as a wood preservation agent in 1903. The subsequent constant migration of carbolineum through the layers of paint to the surface has had a detrimental effect on the aesthetic appearance of the epitaph. Carbolineum is an oily, water-insoluble, flammable, dark brown mixture of coal tar oil components. Due to its content of polycyclic aromatic hydrocarbons (PAH), which are classified as carcinogenic and harmful to the environment, the use of carbolineum has been forbidden. The aim of the project is to develop an exemplary Conservation treatment (hat will reduce the toxic contents of the historical wooden object. The new method should be applicable to similar objects that are also contaminated with carbolineum. The historic carbolineum was identified by the GC-MS method and the X-Ray computed tomography revealed the biological wood damage and previous restoration measures. Several decontamination methods such as the extraction with supercritical C02, with dichloromethane vapour/fluids, with 1,3-dioxolane or with petrol ether by vaccum impregnation were investigated. This project is founded by the Deutsche Bundesstiftung Umwelt (DBU).
The preservation of human achievements and progress is undoubtedly a pillar of our society. This includes detecting threats in time to prevent disasters that may occur from forces of nature, defective technology, human failure or malicious intent. In this respect, there is arguably no difference between safety and security, though different institutions are involved in the regulation and control of them. However, the unifying rationale ought to result in the building of bridges between them. This is the Working Group's mission.