Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (46)
- Zeitschriftenartikel (26)
- Vortrag (13)
- Beitrag zu einem Sammelband (6)
- Posterpräsentation (4)
Sprache
- Englisch (73)
- Deutsch (20)
- Mehrsprachig (2)
Schlagworte
- Drop test (26)
- Drop testing (7)
- Damping concrete (5)
- Dangerous goods packagings (5)
- Impact limiter (5)
- Radioactive material (5)
- Ductile cast iron (4)
- Fracture mechanics (4)
- Measurement methods (4)
- RAM packages (4)
Organisationseinheit der BAM
- 3 Gefahrgutumschließungen; Energiespeicher (10)
- 8 Zerstörungsfreie Prüfung (6)
- 8.1 Sensorik, mess- und prüftechnische Verfahren (6)
- 3.1 Sicherheit von Gefahrgutverpackungen und Batterien (5)
- 3.3 Sicherheit von Transportbehältern (5)
- 6 Materialchemie (1)
- 6.1 Oberflächen- und Dünnschichtanalyse (1)
- 6.2 Material- und Oberflächentechnologien (1)
- 7 Bauwerkssicherheit (1)
- 7.2 Ingenieurbau (1)
Paper des Monats
- ja (1)
Eingeladener Vortrag
- nein (13)
Anwendung des instrumentierten Kerbschlagbiegeversuchs zur Abschätzung der Rissauffangzähigkeit
(2001)
Die moderne Bauteilsicherheitsbewertung basiert auf Methoden der Bruchmechanik unter Anwendung von bruchmechanischen Kennwerten, die den Werkstoffwiderstand gegen Rissinitiierung und Rissfortschritt sowie das Rissauffangverhalten charakterisieren. Die experimentelle Ermittlung der Rissarrestzähigkeit ist im Allgemeinen jedoch schwierig und aufwendig. In diesem Beitrag werden Korrelationen für die Abschätzung der Sprödbruch-Übergangstemperatur (TNDT) und der Rissarrestzähigkeit (KIa) mit Hilfe einer Übergangstemperatur, die der Rissauffangkraft im instrumentierten Kerbschlagbiegeversuch entspricht, vorgestellt. Als Kriterien für den Zähigkeitsübergang gelten die an Charpy-V-Proben gemessene Rissauffangkraft 4 kN und die nach Master-Curve-Ansatz berechnete mittlere Rissarrestzähigkeit 100 MPam. Die für verschiedene Baustähle vorgeschlagenen Korrelationen zwischen den Übergangstemperaturen T(Fa = 4 kN), T(KIa) und TNDT werden am Beispiel des Stahles 18Ch2MFA bestätigt.
Modern structural integrity assessment procedures in the field of nuclear related technology incorporate fracture
mechanical concepts. Therefore, they inevitably require the availability of both, loading parameters as well as material
characteristics in terms of fracture mechanical quantities. Especially in case of dynamic loading conditions, the methods
for the determination of the loading parameters need further improvement and there is a lack of material characteristics
as well. In Germany, ductile cast iron (DCI) is used for heavy-sectioned casks for radioactive materials. New developments
in cask design and efforts to extend the application limits require further investigations. The present study is part
of an ongoing fracture mechanics research programme of BAM which is focused on the systematic mechanical and
fracture mechanical material characterisation of DCI materials under dynamic loading conditions. In this study, results
of fracture mechanics investigations on ductile cast iron from an original DCI container with a wide variety of microstructure
under dynamic loading conditions in the temperature range from -50 °C to +22 °C are presented. Large scale
as well as small scale single edge crack bend specimens SE(B) with thicknesses of 140 mm and 15 mm, respectively
were tested. Furthermore, it is reported on the results of a finite element simulation of the dynamic large scale fracture
mechanics tests. Strength and deformation characteristics were determined in dynamic tensile tests. They are discussed
with respect to the influence of pearlite content and test temperature. The material specific experimental difficulties in
the determination of reliable dynamic crack initiation toughness values of DCI are outlined.
This paper describes the analytical, numerical and experimental investigations on the phenomenon of
interactions between cask components and content of packages for the transport of radioactive material during drop
tests required according to the IAEA Regulations for the Safe Transport of Radioactive Material.
Radial and axial gaps between cask components and content are usually necessary for thermal reasons but larger
gaps can exist because of the geometrical dimensions of the specified content. Consequently interactions between
content and cask components (lid system, cask body, etc.) are possible and can not be excluded during drop tests.
Interactions in this context are relative movements between cask and content which are mainly due to elastic spring
effects after releasing the cask for the free drop. These relative movements can cause interior collisions between
content and cask during the main impact of the package onto the unyielding target.
Drop tests with various types of Type A and Type B packages fully instrumented with strain gauges and
accelerometers showed that these interactions respectively interior collisions can be considerable relating to high forces
acting on cask lids, lid bolts and the content. Of course the real quantitative consequences of the interactions depend
upon different conditions, among others the drop orientation, the design characteristics of the impact limiters, the
dimensions of the gaps, the material characteristics of the contents, etc. .
In order to investigate more precisely the phenomenon of interactions BAM carried out finite element
calculations for the named casks using the ABAQUS/ Standard and ABAQUS/ Explicit computer code comparing them
with results obtained from experiments. Additionally, tests with a simplified model instrumented with accelerometers
were carried out accompanied by finite element calculations and analytical calculations using MATHEMATICA.
The investigations on the mentioned phenomena of interaction show that they should be considered in approval design
tests and/ or calculations.
In the present study, ductile cast iron from an original DCI container with a wide variety of microstructure was
investigated in order to determine the materials fracture toughness under impact loading conditions. Three-point bending
specimens with thickness of 140 mm from a cubic DCI container were investigated at elevated loading rates to
provide reliable fracture toughness parameters for the assessment procedures. In contrast to static fracture behaviour,
the fracture toughness values of thick-walled DCI at higher loading rates show a remarkable reduction with decreasing
temperature up to 50 °C and a significant shift of the transition range. The lower bound fracture toughness value used
in the BAM DCI safety concept was confirmed for impact loading conditions by these fracture mechanics tests using
large specimens. These measurements are relevant to the licensing tests for storage containers without shock absorbers,
especially to the assessment of the dynamic behaviour of crack-like defects inside a cask structure under drop test conditions.
Using extensive dynamic numerical analyses it could be shown, that for special crack configurations the dynamic
crack tip parameter (KI, or J) may be estimated by static formulae even under mechanical impact. These results
of the safety assessment were verified according to the German Konrad repository acceptance criteria by a drop test
with a cubic waste container with artificial crack-like defects from 5 m height onto a representative storage facility
foundation.
BAM is the responsible authority in Germany for the assessment of the mechanical and thermal design safety of packages for the transport of radioactive materials. The assessment has to cover the proof of brittle fracture safety for package components made of potentially brittle materials. This paper gives a survey of the regulatory and technical requirements for such an assessment according to BAM's new 'Guidelines for the application of ductile cast iron for transport and storage casks for radioactive materials'. Based on these guidelines, higher stresses than before will be permissible, but it is necessary to put more effort into the safety assessment procedure. The fundamentals of such a proof using the methods of fracture mechanics are presented. The recommended procedure takes into account the guidelines of the IAEA's advisory material which are based on the prevention of crack initiation. Examples of BAM's research and safety assessment practices are given. Recommendations for further developments towards package designs with higher acceptable stress levels will conclude the paper.
The performance of shock absorbers has been tested in specific regulatory drop tests onto an un-yielding target at the BAM drop test facility. Optical surface digitization methods have been used to measure, analyze and evaluate permanent deformations of shock absorbers more systemati-cally. The measurement principle of the fringe projection technique used and its technical appli-cation to shock absorber research is explained in detail in this paper. Furthermore, examples of shock absorber testing results as well as final data visualization are presented.
The performance of shock absorbers has been tested in specific regulatory drop tests onto an unyielding target at the BAM drop test facility. Optical surface digitisation methods have been used to measure, analyse and evaluate permanent deformations of shock absorbers more systematically. The measurement principle of the used fringe projection technique and its technical application to shock absorber investigations is explained in detail. Furthermore, examples of shock absorber testing results as well as final data visualisation are given in the present paper.
Test installations for the examination of CASTOR casks at the BAM test centre technical safety
(2008)
BAM as competent German government institute for the mechanical and thermal testing of radioactive material transport and storage containers, operates unique drop and fire test facilities for experimental investigations on an open-air Test Centre Technical Safety.
To be able to perform even drop tests with full-scale spent fuel or HAW casks (i. e. the German CASTOR cask designs; CASTOR in the meantime in synonym for all other spent fuel cask designs) BAM constructed in 2004 a large drop test facility capable to handle 200 tons test objects, and to drop them onto a steel plate covered unyielding target with a mass of nearly 2600 tons. Drop testing of the 181 ton CONSTOR V/TC, the 127 ton MHI-MSF 69BG, a 1:2 scale model (CASTOR HAW TB2) and of cubic containers for radioactive waste disposal will briefly be presented. The experimental BAM drop testing activities can be supported also by drop testing of smaller packages (up to 2 tons) in an in-house test facility, and by dynamic, guided impact testing inside a new drop test machine. In May 2008 a new modern fire test facility was put into operation. The facility provides two test stands fired with liquid Propane. Testing in every case has to be completed by calculational investigations where BAM operates appropriate computer codes, e. g. ABAQUS, LS-Dyna, ANSYS and other analytical tools.
This paper presents a comparison between full scale prototype and reduced scale model drop test data in regard to similarity mechanics. Together with a current BAM research project, the paper contributes to the further development of mechanical evaluation methods for safety assessment of RAM transport and storage packages including the transferability of package impact response from reduced scale models to full scale packages.
For validation of structural integrity under normal and hypothetical accident conditions during transport and storage of dangerous goods the Federal Institute for Materials Research and Testing (BAM) focuses its safety related scientific research on advanced mechanical safety assessment methods including simulation of high rate impact of model components and structures.
An impact and crash test facility was recently developed for performing dynamic impact tests with component size specimen, or to crash specimens of impact limiter materials and structural components.
The paper presents experimental techniques of BAM drop test machine and options of several measurement methods and advancements in order to characterize typical shock-absorbing materials under impact loading conditions. Instrumented drop weight tests are performed to complete materials data base and energy absorption of shock-absorbing materials as well as to implement materials and structural parameters into FEA of reference structures.
BAM safety related research of containers for radioactive material focuses on advanced mechanical safety assessment methods for verification of the structural integrity and leak tightness under normal conditions of transport and hypothetical accident conditions during transport and storage. An essentially unyielding target with a rigid surface is required for impact tests performed for package approval according to IAEA regulations. In addition to specification of a target, e.g. with a combined mass more than 10 times that of the specimen for drop tests, unyielding target characteristics have been investigated with various package designs and different impact tests. The unyielding target of the BAM drop test facility, a reinforced concrete block together with an embedded and anchored mild steel plate, provides relatively large mass and stiffness with respect to the packages being tested. For monitoring reasons accelerometers and strain gauges are embedded in the concrete block of the foundation at several positions. Additionally, dynamic impact responses like vibrations and rigid body motion can be measured by seismic accelerometers. The mechanical characterisation of the target's rigidity is based on experimental results from various drop tests. Test containers with weights of 181 000 kg, 127 000 kg and 8010 kg hit the target with velocities up to 13·5 m s-1 in the horizontal and vertical drop positions. The rigidity of the impact target can be demonstrated with experimental results confirmed by analytical approaches. Some conclusions can be drawn about experimental testing as well as analytical calculations in order to compare impact effects.
The paper presents technical details of the drop test performance as well as some experimental results of tests carried out with the Japanese 'Yoyushindo-disposal' waste container for intermediate depth disposal. The tests were accompanied by various metrology to collect data as basis for safety assessment.
This paper presents technical details of the drop test performance as well as some experimental results of tests carried out with the Japanese 'Yoyushindo-Disposal' waste container for intermediate depth disposal. The drop test program comprised three single 8 m drop tests at the specimen's corner edge orientation onto a concrete slab. The slab was connected to the unyielding IAEA target of the BAM's 200 t drop test facility. The three tested specimens had masses between 20 000 and 28 000 kg depending on their content mass. The tests were accompanied by various metrology, such as strain and deceleration measurements, optical three-dimensional deformation methods, leak tightness testing and test installation for potential particle release measurements to collect a set of data for establishing a basis for safety assessment.
Mechanical design assessment approaches of actual spent fuel and HLW transport package designs
(2010)
Mechanical design assessment approaches of actual spent fuel and HLW transport package designs
(2010)
Federal Institute for Materials Research and Testing (BAM) is the competent authority for mechanical and thermal safety assessment of transport packages for spent fuel and high level waste in Germany. In context with package design approval of the new German high level waste cask CASTOR® HAW28M, BAM performed several drop tests with a half scale model of the CASTOR® HAW/TB2. The cask is manufactured by Gesellschaft für Nuklear Service mbH and was tested under accident transport conditions on the 200 tons BAM drop test facility at the BAM Test Site Technical Safety. For this comprehensive test program, the test specimen CASTOR® HAW/TB2 was instrumented at 21 measurement planes with altogether 23 piezo resistive accelerometers, five temperature sensors and 131 triaxial strain gauges in the container interior and exterior respectively. The strains of four representative lid bolts were recorded by four uniaxial strain gauges per each bolt. Helium leakage rate measurements were performed before and after each test in the above noted testing sequence. The paper presents some experimental results of the half scale CASTOR® HAW/TB2 prototype (14 500 kg) and measurement data logging. It illustrates the extensive instrumentation and analyses that are used by BAM for evaluating the cask performance to the mechanical tests required by regulations. Although some of the quantitative deceleration, velocity and strain values cannot be shown because of confidentially issues, they are provided qualitatively to illustrate the types of measurements and methodologies used at BAM.
BAM (Federal Institute for Material Research and Testing) is the competent authority for mechanical and thermal safety assessment of transport packages for spent fuel and high level waste (HLW) in Germany. In context with package design approval of the new German HLW cask CASTOR HAW28M, BAM performed several drop tests with a half-scale model of the CASTOR HAW/TB2. The test model was manufactured by GNS (Gesellschaft fur Nuklear Service mbH) and tested under accident transport conditions on the 200 tons BAM drop test facility at the BAM Test Site Technical Safety. For this comprehensive test program the test specimen CASTOR HAW/TB2 was instrumented at 21 measurement planes with altogether 23 piezo-resistive accelerometers, five temperature sensors and 131 tri-axial strain gauges in the container interior and exterior, respectively. The strains of four representative lid bolts were recorded by four uniaxial strain gauges per each bolt. Helium leakage rate measurements were performed before and after each test in the above noted testing sequence. The paper presents some experimental results of the half-scale CASTOR HAW/TB2 prototype (14,500 kg) and measurement data logging.
Drop and fire testing of spent fuel and HLW transport casks at 'BAM test site technical safety'
(2011)
BAM, as a competent German government institute for the mechanical and thermal testing of radioactive material transport and storage containers, operates unique drop and fire test facilities for experimental investigations on the open air BAM Test Site Technical Safety. To be able to perform even drop tests with full scale spent fuel or HAW casks (i.e. the German CASTOR cask designs), BAM constructed in 2004 a large drop test facility capable to handle 200 ton test objects, and to drop them onto a steel plate covered unyielding target with a mass of nearly 2600 ton. Drop test campaigns of the 181 ton GNS CONSTOR V/TC, the 129 ton MHI MSF-69BG and a 1:2 scale model of the GNS CASTOR HAW28M (CASTOR HAW/TB2) have been performed since then. The experimental BAM drop testing activities can be supported also by drop testing of smaller packages (up to 2 ton) in an in-house test facility and by dynamic, guided impact testing of package components and material specimen inside a new drop test machine. In May 2008, a new modern fire test facility was put into operation. The facility provides two test stands fired with liquid propane. Testing in every case has to be completed by computational investigations, where BAM operates appropriate finite element modelling on appropriate computer codes, e.g. ABAQUS, LS-DYNA, ANSYS and other analytical tools.
Instrumented measurements on radioactive waste disposal containers during experimental drop testing
(2011)
In context with disposal container safety assessment of containers for radioactive waste the German Federal Institute for Materials Research and Testing (BAM) performed numerous drop tests in the last years. The tests were accompanied by extensive and various measurement techniques especially by instrumented measurements with strain gages and accelerometers. The instrumentation of a specimen is an important tool to evaluate its mechanical behavior during impact. Test results as deceleration-time and strain-time functions constitute a main basis for the validation of assumptions in the safety analysis and for the evaluation of calculations based on finite-element methods. Strain gauges are useful to determine the time dependent magnitude of any deformation and the associated stresses. Accelerometers are widely used for the measuring of motion i.e. speed or the displacement of the rigid cask body, vibration and shock events. In addition high-speed video technique can be used to visualize and analyze the kinematical impact scenario by motion analysis. The paper describes some selected aspects on instrumented measurements and motion analysis in context with low level radioactive waste (LLW) container drop testing