Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (27)
- Beitrag zu einem Tagungsband (21)
- Zeitschriftenartikel (11)
- Beitrag zu einem Sammelband (9)
- Posterpräsentation (4)
- Sonstiges (2)
- Forschungsbericht (2)
- Dissertation (1)
Schlagworte
- Recycling (10)
- Gypsum (8)
- Bauschuttaufbereitung (7)
- Beton (6)
- Gips (6)
- Ökobilanzielle Bewertung (6)
- Environmental evaluation (5)
- Abbruch (4)
- Bauschutt (4)
- CDW processing (4)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (27)
Untersuchungen zur Nassaufbereitung von Betonbrechsand unter Verwendung der Setzmaschinentechnik
(2009)
Gegenwärtig wird Altbeton hauptsächlich durch Zerkleinerung und Klassierung zu rezyklierten Gesteinskörnungen verarbeitet. Dabei fällt bis zu 50 % des Ausgangsmaterials als Betonbrechsand an. Während gröbere Körnungen wieder in der Betonproduktion eingesetzt werden können, ist dieser Verwertungsweg für Betonbrechsande aufgrund ihrer vergleichsweise ungünstigeren Materialeigenschaften nicht möglich. Die schlechtere Baustoffqualität der feinen Körnungen beruht dabei maßgeblich auf ihrem höheren Altzementsteingehalt. In der vorliegenden Arbeit wurde die Verbesserung der Materialeigenschaften von Betonbrechsanden durch ein Nassaufbereitungsverfahren in Hinblick auf eine Wiederverwertung als Gesteinskörnung in der Betonproduktion untersucht. Das Verfahren beinhaltete eine Abrasionsbehandlung zur Abtrennung der Zementsteinmatrix vom Natursteinkorn, einen Klassierungsschritt zur Entfernung der Fraktion < 100 μm und als Hauptverfahrensstufe eine Dichtesortierung mittels Setzmaschinentechnik. Die Evaluierung der Baustoffeigenschaften von Ausgangsmaterial und aufbereiteten Körnungen erfolgte sowohl an den Gesteinskörnungen als auch an den daraus hergestellten Mörteln und Betonen. Dazu wurden verschiedene chemisch-physikalische und mikroskopische Untersuchungsmethoden eingesetzt. Die Analysenergebnisse zeigten, dass es möglich ist, maßgebliche Baustoffeigenschaften wie Porosität, Wasseraufnahme und Zementsteingehalt mit dem untersuchten Aufbereitungsverfahren deutlich zu verbessern. Die Untersuchungen der RC-Betone mit einem Anteil von bis zu 50 % Betonbrechsand an der gesamten Gesteinskörnung wiesen die positiven Auswirkungen der Nassaufbereitung eindeutig nach. Dies wurde besonders an den Messungen des dynamischen Elastizitätsmoduls und an den Schwindmessungen deutlich. Die Qualität von Natursanden konnte jedoch nicht erreicht werden. Für sämtliche durchgeführten Betonuntersuchungen konnten signifikante Korrelationen zum Altzementsteingehalt nachgewiesen werden. Dieser konnte als eindeutiger und die tatsächlichen Wirkmechanismen berücksichtigender Güteparameter für rezyklierte Gesteinskörnungen identifiziert werden. Auf dieser Basis wurde ein neuer Bemessungs- ansatz für Recyclingbeton unter Einbeziehung des Altzementsteingehaltes formuliert. Anhand einer Modellanlage im industriellen Maßstab wurden ergänzend eine ökobilanzielle Bewertung des Verfahrens und eine Wirtschaftlichkeitsbetrachtung durchgeführt. Die Bewertungen ergaben, dass das untersuchte Verfahren – in Abhängigkeit von den Rahmenbedingungen – sowohl ökologisch vorteilhaft als auch wirtschaftlich sinnvoll durchgeführt werden kann.
In Germany, about 60 million tons of demolition waste are generated annually. Approximately 70% of the demolition waste is currently recycled. Most recycling applications, for example in roadbed substructures, can be seen as a kind of downcycling. However, there are also some high-level applications for demolition waste. For instance, crushed and sieved concrete demolition waste can be used as concrete aggregate instead of natural materials. Depending on the crushing process, about a third of the broken concrete is currently concrete sand. At present, concrete sand fraction (0-4 mm) is rarely reused as a concrete aggregate. This is due to the fact that some important characteristics of crushed concrete sand are different from those of natural sand. As a result, it does not reach the standards required for aggregates. Concrete containing such aggregate is of lower quality than concrete made of natural aggregate. This paper describes an experimental investigation on the treatment of concrete sand gained from demolition waste by wet processing using a jig whereby the sand is separated by grain size and, more importantly, by density. Concrete produced with concrete sand which has been treated in this manner should have the same quality as concrete prepared with natural aggregate. Recycled sand used as aggregate substitutes natural resources and avoids disposal of waste. It has all the characteristics of an Ecomaterial. (author abst.)
Although a large proportion of building rubble is already being recycled, most recycling applications, e.g. in roadbed foundations, can be considered as downcycling. This study is aimed at improving the material properties of crushed concrete fines by wet treatment, using a jig for density separation. Trial runs in a pilot plant with a flow rate between 0.45 and 0.65 t/h were conducted with two different materials (A and B). The materials were separated into heavy fraction, light fraction and finest fraction. Laboratory tests and tests for building materials were carried out on the output fractions and on the input materials. Laboratory tests showed an improvement of material properties such as loss by washing and content of binder matrix as well as water absorption for both materials A and B. The tests for building materials on mortar specimens showed that strength properties of specimens containing crushed concrete fines (heavy fraction) of type A were improved by wet treatment, but not for test specimens of material type B. Strength tests on concrete showed that a replacement of natural aggregates with wet-treated concrete fines up to 50 % had little effect on compressive strength, while untreated material exhibited a clearly lower compressive strength.
The material properties of recycled concrete aggregates (RCA) are
correlated to the sorting accuracy of the former demolition waste. Impurities like
wood, clay bricks or gypsum can lead to inferior building material properties. Harmful
substances like heavy metals or organic pollutants should be minimised as well.
Hence the non-concrete materials have to be separated from the concrete material
stream. This can be done during the demolition process by using selective
dismantling techniques. Alternatively a variety sorting and classifying techniques to
purify the crushed concrete can be utilized.
A research project, funded by the Federal Ministry for the Environment, Nature
Conservation and Nuclear Safety, investigated the possibilities of gaining recycled
concrete aggregates of a high quality for the reuse in the production of concrete. The
work focuses especially on how gypsum respectively sulphates in the crushed
concrete can be reduced. Sulphates can impair the setting behaviour of concrete
and also damage set concrete by causing expansion. Therefore the content of
sulphates in RCA is restricted by guidelines and standards in Germany.
Generally, gypsum in construction waste originates from interior fittings like gypsum
walls, floor screeds, plaster boards and also plaster. Most of these materials can be
reconstructed using selective dismantling techniques. This can be achieved either by
manual labour or by using mechanical equipment e.g. to remove floor screeds by
milling. Depending on the specific deconstruction site it can be more effective and/or
more environmentally compatible to remove sulphates by treating the crushed
concrete. Applicable treatments for sulphate reduction include dry processes like
manual sorting of gypsum wall blocks as well as wet treatments e.g. jigging.
In addition this research project an environmental performance evaluation was
undertaken to assess different techniques for reducing sulphates in recycled
concrete aggregates.
Beim Abbruch von Gebäuden wird eine Vielzahl von unterschiedlichen
Techniken eingesetzt. Der mit Abstand größte Teil der Abbrucharbeiten
wird dabei mit mechanischen Verfahren ausgeführt.
In Abhängigkeit vom rückzubauenden Gebäude können aber auch hydrodynamische Verfahren (z. B. Hochdruckwasserstrahlen), thermische Verfahren (z. B. Schneidbrennen) oder chemische Verfahren (z. B. Sprengen) angewandt werden.
Die Qualität von rezyklierten Gesteinskörnungen muss nicht nur bautechnischen Anforderungen und rechtlich verbindlichen Umweltstandards genügen, sondern ihr Einsatz in der Betonherstellung wird auch vor dem Hintergrund der Leitlinien der Nachhaltigkeit bewertet. Für die Gewinnung von rezyklierten Gesteinskörnungen bedeutet dies, dass sowohl bei den Abbrucharbeiten als auch bei der Bauschuttaufbereitung darauf geachtet werden muss, dass die gewählten Verfahren nicht nur ökonomischen Kriterien genügen müssen, sondern auch keine nachteiligen ökologischen oder sozialen Auswirkungen haben dürfen.
In verschiedenen Forschungsprojekten konnte durch ökobilanzielle Bewertungen von einzelnen Verfahren und Verfahrensabläufen gezeigt werden, dass rezyklierte Gesteinskörnungen aus Altbeton unter bestimmten Rahmenbedingungen umweltverträglich gewonnen werden können und ihre Nutzung durch die Substitution von Natursteinkörnungen sowohl zur Schonung von natürlichen Ressourcen als auch zu einer Reduzierung von Umweltbelastungen beitragen kann.
Effects of wet processed crushed concrete fines as secondary aggregates in building materials
(2008)
Aufgrund der großen Massenströme ist das Recycling von Baurestmassen von besonderer Bedeutung
für die Schonung von natürlichen Ressourcen. Eine wichtige Voraussetzung für ein hochwertiges
Recycling, wie z.B. eine Wiederverwertung von aufbereitetem Bauschutt/Altbeton als rezyklierte
Gesteinskörnung im Hochbau, ist die Einhaltung von Grenzwerten für Stör- und Schadstoffe. Dabei
steht der Sulfatgehalt im Eluat von Bauschutt besonders im Fokus. In der vorliegenden Studie wird
untersucht, wie durch die Optimierung von Abbrucharbeiten und Bauschuttaufbereitung hochwertige
Gesteinskörnungen aus Altbeton gewonnen werden können. Anhand von Literatur- und
Datenrecherchen werden zunächst Sulfatquellen in Gebäuden sowie verfügbare Abbruch- und
Aufbereitungstechniken zusammengestellt. Am Beispiel von unterschiedlichen Gebäudetypen werden
Szenarien für selektiven und nicht selektiven Abbruch (Schwerpunkt: Sulfatentfachtung) in Hinblick auf
ihre Umweltwirkungen ökobilanziell bewertet. Ergänzt werden diese Bewertungen durch
Untersuchungen an realen Bauschuttmaterialien und Abbruchprojekten. Auf dieser Basis werden
Handlungsempfehlungen für die Gewinnung von hochwertigen RC-Gesteinskörnungen erarbeitet und
diskutiert.-----------------------------------------------------------------------------------------
Due to the large-scale mass flow of construction and demolition wastes, the recycling of those
residues is of particular importance for the conservation of natural resources. An important
requirement for recycling on a high level, like the reuse of crushed concrete as recycled concrete
aggregate, is the observation of limits for hazardous substances and impurities. This study is focusing
on the reduction of sulphates in the eluate of crushed concrete. An investigation of possibilities to
optimize demolition and dismantling as well as treatment of crushed concrete with the objective of
gaining recycled concrete aggregates of high quality. Based on a literature research and a data review
the origins of sulfates in buildings and also the availability of techniques for demolition and treatment
of crushed concrete are listed and evaluated. Using the examples of different building types scenarios
for selective dismantling and non-selective demolition (focused on reducing suphates) are evaluated in
terms of affecting the environment. In addition samples from real demolition construction sites and
plants for treatment of construction rubble were investigated. Based on these results
recommendations for the production of high quality recycled concrete aggregates are worked out.
Gipsaufkommen in Bauschutt
(2012)
Ressourceneffizienz im Betonrecycling - Rahmen und Möglichkeiten in Deutschland und der Schweiz
(2013)
Aufgrund der großen anfallenden Massenströme ist die Wiederverwertung von Baurestmassen in Industrienationen von besonderer Bedeutung. Auch vor dem Hintergrund der Ressourceneffizienz wird beispielsweise die Nutzung des in Bauschutt vorhandenen Wertstoffpotentials zunehmend wichtiger.
Eine besondere Rolle spielt dabei die Wiederverwertung von Altbeton. Ein Grund hierfür ist der deutliche Anstieg des seit Mitte des letzten Jahrhunderts im Bauwesen verbrauchten Betons und die damit verbundene – zeitlich versetzte – Zunahme des Altbetonanteils im Bauschutt. Darüber hinaus ist das Wertstoffpotential von Altbeton im Vergleich zu anderen Abbruchmaterialien besonders groß, denn Altbeton kann unter bestimmten Bedingungen sehr hochwertig auch als rezyklierte Gesteinskörnung wieder in der Betonherstellung eingesetzt werden. Damit kann ein Kreislauf im Sinne eines Closed-loop-Recycling verwirklicht und Altbeton damit hochwertig wiederverwertet werden.
Die Zementindustrie erzeugt etwa 6-7% der globalen CO2-Emissionen und steht damit als Industriezweig vor dem Hintergrund einer anvisierten Klimaneutralität vor gewaltigen Herausforderungen. Der Prozess der Klinkerherstellung wurde über die vergangenen Jahrzehnte bereits kontinuierlich optimiert. Seit 1990 ist es der deutschen Zementindustrie gelungen, die spezifischen CO2-Emissionen der Zementproduktion u. a. durch den Einsatz alternativer, nicht fossiler Brennstoffe und durch Absenkung des Klinkergehalts im Zement um 20 % zu senken. Weitere konventionelle Minderungsstrategien versprechen jedoch nur noch wenig zusätzliche Reduktion. Im Falle des Portlandklinkers besteht die Schwierigkeit darin, dass zwei Drittel der CO2-Emissionen rohstoffbedingt durch die Entsäuerung des Kalksteins (CaCO3) anfallen, die durch die beschriebenen Maßnahmen nicht weiter abgesenkt werden können. Vielmehr wird es erforderlich sein, noch zu entwickelnde oder zu optimierende Technologien anzuwenden und ggf. alle relevanten Ebenen wie Produktion, Weiterverarbeitung und Anwendung von Zement und Beton neu zu denken. Neben technologischen Ansätzen zur CO2-Abscheidung mit nachfolgender langfristiger Speicherung (Carbon Capture and Storage – CCS) oder Verwertung (Carbon Capture and Utilisation – CCU) werden auch alternative Rohstoffe für die Zementproduktion und alternative Bindemittel in Betracht zu ziehen sein.
Gypsum is widely used in the construction sector, and its worldwide consumption has been increasing now for several decades. Currently, the gypsum demand is met up to 60% by FGD gypsum (a by-product from coal-fired power plants) in Germany. The natural gypsum deposits cover the remaining gypsum demand. Due to national climate protection goals and the related shutdown of coal-fired power plants, the FGD gypsum supply will decrease significantly in the coming years and, therefore, other gypsum sources must be found.
Depending on the lifetime of the used gypsum products in the construction sector, an increase of gypsum in construction and demolition waste is to be expected. With regard to an upcoming shortage of gypsum, several approaches are being tested to recover gypsum from construction and demolition waste. Gypsum plasterboard recycling is already implemented on an industrial scale. Furthermore, new processes to recycle different types of gypsum products from construction and demolition waste are being examined. Of particular interest are different types of gypsum boards because they are well suited for selective dismantling. Therefore, they can be recovered comparatively free of impurities which is most important for the gypsum recycling.
In the research project “GipsRec 2.0”, funded by the Federal Ministry of Education and Research, recycling methods for gypsum fiberboards are being investigated. Additionally, the suitability of different types of synthetic gypsum as substitutes for FGD gypsum is being considered. Currently, the quantities of recycled gypsum are not sufficient with regard to the reduction of FGD gypsum. An increase of gypsum recycling should be achieved to narrow the future gypsum gap that will occur in the near future.
Gypsum is widely used in the construction sector and its worldwide consumption has been increasing for several decades. Depending on the life-time of the used gypsum products, an increase of gypsum in construction and demolition waste follows. Especially against the background of a circular economy, the recycling of waste gypsum is of growing importance. However, the use of recycled gypsum makes only sense if it is environmentally friendly. Therefore, an evaluation of the environmental impacts of an industrial-scale processing for the recycling of post-consumer gypsum waste was conducted. The evaluation was performed with an established life cycle assessment software. Original data provided by industry and complementary data from a database for life cycle assessments were used for the calculations. Two scenarios for recycled gypsum with different transportation distances were calculated. These results are compared with results of the environmental evaluation of gypsum derived from coal-fired power plants (FGD gypsum) and natural gypsum. The results show that utilization of recycled gypsum can be environmentally advantageous compared to the use of natural gypsum or FGD gypsum, especially in the impact categories land transformation and resource consumption (abiotic depletion potential). For most environmental impact categories the specific transportation distances have a strong influence.
A sustainable recycling of photovoltaic (PV) thin film modules gains in importance due to the considerable growing of the PV market and the increasing scarcity of the resources for semiconductor materials. The paper presents the development of two strategies for thin film PV recycling based on (wet) mechanical processing for broken modules, and combined thermal and mechanical methods for end-of-life modules. The feasibility of the processing steps was demonstrated in laboratory scale as well as in semi-technical scale using the example of CdTe and CIS modules. Pre-concentrated valuables In and Te from wet mechanical processing can be purified to the appropriate grade for the production of new modules.
An advantage of the wet mechanical processing in comparison to the conventional procedure might be the usage of no or a small amount of chemicals during the several steps.
Some measures are necessary in order to increase the efficiency of the wet mechanical processing regarding the improvement of the valuable yield and the related enrichment of the semiconductor material.
The investigation of the environmental impacts of both recycling strategies indicates that the strategy, which includes wet mechanical separation, has clear advantages in comparison to the thermal treatment or disposal on landfills.
Die Nutzung des Wertstoffpotentials von Abfällen und Reststoffen ist ein Grundpfeiler im Schutz von natürlichen Ressourcen. Dabei ist der Aufbau und Erhalt von Stoffkreisläufen im Baubereich - aufgrund der großen Menge an Baurestmassen - von besonderer Ressourcenrelevanz. Während in Zukunft im Sinne der Nachhaltigkeit schon bei der Errichtung von Gebäuden auch auf Möglichkeiten zur Stoffstromtrennung beim Rückbau geachtet werden sollte, sind die heute rückzubauenden Bauwerke nicht unter diesem Gesichtspunkt errichtet worden.
Concrete is one of the most widely used construction materials and, accordingly, the concrete industry is an important stakeholder in the field of sustainable construction. Therefore various approaches have been implemented to increase the sustainability of concrete. Besides reducing CO2-emissions during cement production, increasing the energy efficiency of buildings and extending their life span, the end-of-life performance of concrete is also an essential aspect of sustainability. Reusing concrete as a secondary building material meets the requirements of sustainability in several ways: the extended time availability of primary raw materials and, thereby, the protection of natural resources as well as conserving landfill site. Furthermore, the production of recycled concrete aggregates (RCA) is a good example for closed-loop recycling.
However, regarding the use of RCA as a substitute for natural aggregates in concrete, attention must be paid to all issues of sustainability: this means that environmental, economic and social aspects have to be considered. Since RCA generally have inferior building material properties, such as higher porosity and lower density, the implementation of closed-loop recycling of concrete only makes sense if the technical quality assurance is secured. This paper focusses on the implementation of techniques for the deconstruction/demolition of buildings and the subsequent treatment of concrete rubble in order to improve the building material properties of RCA with regard to the requirements of sustainability and also technical rules and standards.
Concrete is one of the most widely used construction materials and, accordingly, the concrete industry is an important stakeholder in the field of sustainable construction. Therefore various approaches have been implemented to increase the sustainability of concrete. Besides reducing CO2-emissions during cement production, increasing the energy efficiency of buildings and extending their life span, the end-of-life performance of concrete is also an essential aspect of sustainability. Reusing concrete as a secondary building material meets the requirements of sustainability in several ways: the extended time availability of primary raw materials and, thereby, the protection of natural resources as well as conserving landfill site. Furthermore, the production of recycled concrete aggregates (RCA) is a good example for closed-loop recycling.
However, regarding the use of RCA as a substitute for natural aggregates in concrete, attention must be paid to all issues of sustainability: this means that environmental, economic and social aspects have to be considered. Since RCA generally have inferior building material properties, such as higher porosity and lower density, the implementation of closed-loop recycling of concrete only makes sense if the technical quality assurance is secured. This paper focusses on the implementation of techniques for the deconstruction/demolition of buildings and the subsequent treatment of concrete rubble in order to improve the building material properties of RCA with regard to the requirements of sustainability and also technical rules and standards.
Die Rückführung von Baurestmassen in den Stoffkreislauf ist aufgrund der großen jährlichen Anfallmengen von besonderer Bedeutung für eine ressourceneffiziente Wirtschaft. Besonders Bauschutt hat in vielen Fällen ein hohes Potential für eine Wiederverwertung. Vor einer Wieder- oder Weiterverwendung von Sekundärrohstoffen aus Bauschutt muss jedoch neben der technischen Eignung der hergestellten Materialien auch ihre Umweltverträglichkeit, wie z.B. der Schadstoffgehalt, gesichert sein. Entsprechende Normen und technische Regelungen sind mittlerweile europaweit etabliert.
Ein weiterer wichtiger Umweltaspekt bei Recyclingverfahren ist die Betrachtung der Umweltwirkungen, die mit der Aufbereitung der Reststoffe verbunden sind. Dabei stehen die Ergebnisse von Ökobilanzen oder ökobilanziellen Bewertungen von Sekundärrohstoffen nicht nur für sich, sondern sollten auch im Kontext mit denen von natürlichen oder industriell gefertigten Rohstoffen bewertet werden.
Da im Bausektor der Einsatz von Gips, speziell von Innenausbaumaterialien wie z.B. Gipskartonplatten, in den vergangenen Jahrzehnten stark angestiegen ist, steigt in Abhängigkeit von der jeweiligen Lebensdauer auch der Anteil an Gipsprodukten in Baurestmassen. Beim Kontakt von Gips mit Wasser kann es zur Elution von Sulfaten aus Gipsprodukten kommen. Dies ist aus bautechnischen Gründen (Bildung von treibenden Mineralphasen) und auch in Hinblick auf mögliche Umweltwirkungen sehr ungünstig und entsprechend gehören Sulfate im Sekundärbaustoff zu den begrenzenden Faktoren beim Recycling bzw. bei der Verwertung von Bauschutt und anderen mineralischen Abfällen. Vor diesem Hintergrund ist die getrennte Erfassung von Gipsabfällen nicht nur für ein sortenreines Gipsrecycling, sondern auch für die Wiederverwertung von Bauschutt und damit zweifach sinnvoll.
Naturgips ist nicht unbegrenzt verfügbar und sein Abbau ist zudem mit Umweltbelastungen verbunden, während gleichzeitig infolge der Energiewende mit einem Rückgang des Aufkommens von REA-Gips zu rechnen ist. Entsprechend ist für die zukünftige Gipsproduktion der Einsatz von geeignetem RC-Gips naheliegend. Durch geschlossene Kreisläufe kann auch hier ein weiterer wichtiger Beitrag zur Ressourceneffizienz geleistet werden.
Das Recycling von Gipsabfällen wird schon seit einigen Jahren in unterschiedlichem Umfang in mehreren europäischen Ländern betrieben. Dabei werden sowohl stationäre als auch mobile Anlagen eingesetzt, die über unterschiedlich komplexe Aufbereitungstechniken verfügen. Für die Verwertung der aufbereiteten RC-Gipse in der Gipsproduktion sind Qualitätsanforderungen festgelegt. Gipskartonplatten sind für die Herstellung von qualitativ hochwertigen RC-Gipsen besonders geeignet. Für das Recycling sind die getrennte Sammlung der Gipsabfälle und der Trans¬port in geeigneten Behältnissen in Hinblick auf eine möglichst hohe Sortenreinheit wichtige Kriterien.
Ein Forschungsprojekt im UFOPLAN des Umweltbundesamtes untersucht den aktuellen Stand des Gipsrecyclings in Deutschland und anderen europäischen Ländern und beleuchtet Hemmnisse und Maßnahmen zur Förderung des Gipsrecyclings in Deutschland. Weiterhin werden in einer umfassenden Ökobilanz verschiedene Szenarien zur Gewinnung von RC-Gipsen bewertet. In dem Beitrag werden erste Ergebnisse dieses Projektes aufgezeigt.
Due to the large quantities of construction and demolition waste (CDW) in Europe, its reuse or recycling is of particular importance. Although several countries already recycle high amounts of CDW, the use as secondary raw materials is often limited by inferior building material properties. Specific characteristics, like high porosity and low density are caused by hardened cement paste in crushed concrete and the content of mortar and plaster in brick debris. Impurities like wood or gypsum and also harmful substances like organic pollutants may be a major problem for a reuse and should be minimized. Therefore unwanted materials and impairing substances have to be separated from the secondary building material stream. This can be done during the demolition process by using techniques for selective dismantling or during the subsequent treatment of the resulting rubble. Since almost all processing steps are associated with environmental impacts, the benefits of saving natural resources by applying secondary building materials should be weighed carefully. An environmental performance evaluation was undertaken to assess different techniques for reducing gypsum in recycled concrete aggregates, aiming at a minimization of elutable sulfates. These results were compared to the environmental impacts of the extraction of natural aggregates for concrete.
In dem Projekt sollten die Aufbereitung der Betonbrechsandfraktion aus Bauschutt mittels eines Nassverfahrens zu einer geeigneten Gesteinskörnung für die Betonherstellung sowie die vollständige Verwertung der bei diesem Verfahren anfallenden Reststoffe demonstriert werden.
Der im Rahmen der geordneten Vorsortierung mit zahlreichen Schritten zur Qualitätssicherung hergestellte Betonbrechsand war qualitativ hochwertig und wies nur geringe Schadstoffgehalte auf. Für die Nassaufbereitung des Betonbrechsands wurde vom Projektpartner Allmineral der Prototyp einer Sandsetzmaschine zur Dichtetrennung designt und konstruiert. Diese Sandsetzmaschine wurde für die umfangreichen Betonbrechsandversuche in die Aufbereitungsanlage der BAM integriert. Begleitend zur Aufbereitung wurden die eingesetzten Materialien, Bauschutt und Prozesswasser, sowie die Austragsprodukte chemisch-physikalisch und mineralogisch untersucht.
Die anschließenden Baustoffuntersuchungen zeigten, dass durch das im Demonstrationsprojekt angewandte Nassaufbereitungsverfahren eine deutliche Verbesserung der Materialeigenschaften des Betonbrechsandes erzielt werden konnte. Die Qualität von Natursteinkörnungen wurde (z.B. aufgrund von Kornschädigungen durch den Bruch des Altbetons und noch verbleibende Zementanhaftungen) gleichwohl nicht erreicht. Gerade die Betonprüfungen (mit Anteilen von bis zu 50% Betonbrechsand an der gesamten Gesteinskörnung) haben jedoch gezeigt, dass es dennoch sehr wohl möglich wäre, größere Mengen von aufbereitetem Betonbrechsand in der Betonherstellung zu verwerten und so im Sinne der Nachhaltigkeit den Verbrauch von natürlichen Sandvorkommen zu reduzieren.
Die bei der Nassaufbereitung des Betonbrechsands anfallenden Restsstoffe, nämlich die Fraktionen Leichtgut und Feinstfraktion wurden separat erfasst und bilanziert. Diese Materialien wurden auf die Eignung als Kompostzugabe in Hinblick auf Schadstoffanreicherungen und Pflanzenverträglichkeit untersucht (Projektpartner Deisl). Nach der Kompostierung in Rotteboxen wurden Wachstumsversuche mit dem Referenzgewächs Kresse (Kressetest nach ÖNORM) mit zufriedenstellenden Ergebnissen durchgeführt. Die Reststoffe Feinstgut und Leichtgut aus dem Nassaufbereitungsprozess könnten – sofern die Schadstoffgehalte nachweislich unter den vorgegebenen Grenzwerten liegen – als Zugabe zur Vererdung in der Kompostierung eingesetzt werden.
The use of renewable energy technologies, such as photovoltaics (PV) should be sustainable and environmentally compatible and therefore protect the environment from risks and damaging impacts. Regarding the growing number of installed photovoltaic systems, the end-of-life management of the pv-modules will become increasingly important. Thin film panels contain hazardous substances that may harm the environment if they are not recycled or disposed properly after reaching the end of their service life. Heavy metals, for example, can be toxic as well as carcinogenic or teratogenic. Processing methods for the recycling of PV thin film modules have to take these facts into account. Currently the available recycling techniques usually utilise chemicals such as acids for a wet-chemical treatment of end-of-life modules. The aim of RESOLVED was to identify and test alternative methods for a wet-mechanical treatment in order to reduce the consumption of chemicals in the recycling of thin film modules. Furthermore, the recovered Cadmium-Telluride (CdTe) and Copper-Indium-Diselenide/Disulfide (CIS) should be helping to save scare resources especially for limited elements such as tellurium and indium. The project RESOLVED investigated the recovery of semiconductors material as secondary raw material and the decontamination of the residues of the PV thin film modules. These goals were achieved by testing and optimising existing technologies for the recycling process as well as for the enrichment of the semiconductor materials. The target is to re-use the enriched recovered material in the production of new PV modules. Special efforts were made to look into life cycle analysis, process sustainability, economical aspects, and resource availability.
Advantages of recycling gypsum plaster boards
During the last decades the material composition of buildings has become increasingly diverse. However, largely sorted material flows are needed for generating high quality secondary building materials. The use of secondary building materials can meet the requirements of sustainability in several ways: the extended time availability of primary raw materials and, thereby, the preservation of natural resources as well as the conservation of landfill sites.
Recycling of gypsum (calcium sulfate) can be a good example for the environmental benefits of closed-loop recycling. The content of sulfates in other secondary building materials, in particular in recycled concrete aggregates, should be minimized for quality reasons. In contrast, separated gypsum can also be used in gypsum production if the high quality requirements for the recycled gypsum are met. Since almost all processing steps in the recycling process are associated with environmental impacts, an environmental evaluation of the use of recycled gypsum as a substitute in gypsum production has to be carefully conducted.
This paper focusses on the techniques for generating recycled gypsum from gypsum plasterboards, the related quality requirements and a comprehensive environmental evaluation of the complete process.
During the last decades the material composition of buildings has become increasingly diverse. However, largely sorted material flows are needed for generating high quality secondary building materials. The use of secondary building materials can meet the requirements of sustainability in several ways: the extended time availability of primary raw materials and, thereby, the preservation of natural resources as well as the conservation of landfill sites.
Recycling of gypsum (calcium sulfate) can be a good example for the environmental benefits of closed-loop recycling. The content of sulfates in other secondary building materials, in particular in recycled concrete aggregates, should be minimized for quality reasons. In contrast, separated gypsum can also be used in gypsum production if the high quality requirements for the recycled gypsum are met. Since almost all processing steps in the recycling process are associated with environmental impacts, an environmental evaluation of the use of recycled gypsum as a substitute in gypsum production has to be carefully conducted.
This paper focusses on the techniques for generating recycled gypsum from gypsum plasterboards, the related quality requirements and a comprehensive environmental evaluation of the complete process.
The use of secondary building materials can meet the requirements of sustainability in several ways: the extended time availability of primary raw materials and, thereby, the protection of natural ressources as well as the conservation of landfill sites. Regarding the predicted decrease of gypsum supply in Germany, particularly the recycling of gypsum (calcium sulfate) is of growing importance. Currently, the gypsum demand is fulfilled (at least 60%) by gypsum as side product from coal-fired power plants (FGD Gypsum). Germany’s natural gypsum deposits fulfil the remaining gypsum demand. Due to national climate protection goals the gypsum supply from coal power plants will decrease significantly in the future.
In addition, the content of sulfates in other secondary building materials, in particular in recycled concrete aggregates, should be minimized for quality reasons. Separated gypsum can be used in gypsum production if the high quality requirements for recycled gypsum are met. Accordingly, there have been significant advancements in the processing of gypsum residues in the last years. Since almost all processing steps in the recycling process are associated with environmental impacts, an evironmental evaluation of the use of recycled gypsum as a substitute in gypsum production has to be carefully conducted.
The presentation focusses on the techniques for generating recycled gypsum from gypsum plaster boards, the related quality requirements and a comprehensive environmental evaluation of the complete process.
Due to the great quantities of construction and demolition waste in Europe, the reuse of building material waste as secondary raw materials is of particular importance. A recycling of building materials can meet the requirements of sustainability in several aspects: the extended time availability of primary raw materials and the related protection of natural resources as well as the saving of landfill sites. In recent years sulphates originating from gypsum in secondary building materials, made of construction and demolition waste, received growing attention. Sulphates are unwanted in secondary building materials for concrete production as well as for other use e.g. in unbounded layers. The content of gypsum resp. sulphates in secondary aggregates can be reduced by different methods. Depending on the type of material different steps for selective dismantling can be used to separate gypsum containing residues from concrete rubble. Furthermore some steps for the processing of building rubble are suitable for the reduction of sulphates in the produced aggregates. An environmental evaluation of different ways for the production of recycled concrete aggregates was performed with regard to a reduction of sulphates in the secondary building material. The use of techniques for selective dismantling was environmentally advantegous for the deconstruction of three investigated model houses.
Ausgehend von der aktuellen Situation in Deutschland werden die Themen Baustoffaufbereitung, Ressourceneffizienz vorgestellt und Möglichkeiten zur Verbesserung der Baustoffqualität von Baurestmassen vorgestellt. Zielkonflikte und Beispiele dazu aus dem Baubereich (z.B. Mantelverordnung) werden benannt.
Gypsum (calcium sulfate dihydrate) has excellent building material properties and has been widely used in constructions in the last decades in many countries. Accordingly, an increase of waste gypsum in C&D waste is expected in the upcoming years. On one hand, sulfates are unwanted in other secondary building materials (particularly in recycled concrete aggregates) and should be minimized for quality reasons. On the other hand, used gypsum from CDW can also be used in gypsum production if the high quality requirements for the recycled gypsum – especially regarding the sorting accuracy - are met.
A large percentage of the gypsum from buildings was installed as gypsum plasterboards in interior fittings so far. Gypsum plasterboards are comparatively simple to remove and to separate during selective dismantling. Therefore, a high sorting purity can be achieved. In addition, techniques for the recycling of gypsum plasterboards already exist and high quality standards can be achieved. Also, the reuse in gypsum production has been improved in the last decade. Furthermore, an environmental evaluation of the whole process of gypsum plasterboard recycling and reuse showed that this approach can be environmentally advantageous. Therefore, a closed-loop recycling of gypsum plasterboards is feasible.
This poster will show the development of gypsum consumption in different countries as well as a prognosis for the upcoming of gypsum in CDW in the future decades in Germany. Furthermore, a simplified scheme of the recycling process and selected results from an environmental evaluation will be presented.
Gips ist ein Baustoff, der in den letzten Jahrzehnten in Deutschland mit steigender Tendenz nachgefragt wurde. Diese Nachfrage wird derzeit zum überwiegenden Teil (gut 60%) durch Rauch-gasentschwefelungsgips (REA-Gips) als Nebenprodukt aus der Kohleverstromung gedeckt. Der weitere Gipsbedarf wird durch die Gewinnung von Naturgipsvorkommen in Deutschland befriedigt. In Konse-quenz aus den nationalen Klimaschutzzielen und der Energiewende wird die Versorgung der Gipsin-dustrie mit REA-Gips mittel- und langfristig sehr stark zurückgehen. Das Recycling von Gips wird als ein Beitrag zur Dämpfung von möglichen zukünftigen Versorgungsproblemen gesehen. Das wichtige Verbrauchsegment Gipskartonplatten ist gleichzeitig die wichtigste potentielle Versorgungsquelle für das Gipsrecycling. Ziel des Ufoplan-Vorhabens „Ökobilanzielle Betrachtung des Recyclings von Gipskar-tonplatten“ war es, den aktuellen Stand des Gipsrecyclings in Deutschland und in ausgewählten anderen europäischen Staaten zu fassen. Die Szenarienergebnisse zum Ufoplanprojekt ergeben ein eindeutig wachsendes Potenzial für die Gewinnung von RC-Gips aus rückgebauten Gipskartonplatten in Deutsch-land. Die Ökobilanzergebnisse, die im Rahmen des Projekts gewonnen wurden, zeigen bei fast allen Wirkungskategorien eine ökologische Vorteilhaftigkeit der Recyclingroute gegenüber der Ver¬sorgung mit REA-Gips. Im Falle des Vergleichs zwischen der RC-Gips-Route und der Route aus heimischem Na-turgips ergeben sich differenzierte Ökobilanzergebnisse. Der Einstieg der deutschen Gipsindustrie in den RC-Gips-Markt ist zumindest für die Herstellung von Gipskartonplatten zunächst gelungen. Nun gilt es in den nächsten Jahren die Mengen an RC-Gips in Deutschland zu erhöhen. Für die Etablierung weite-rer Gipsrecyclinganlagen in Deutschland ist deren Wirtschaft¬lichkeit durch Vermeidung von zu niedri-gen Deponiepreisen für Gipsabfälle zu unterstützen. Perspektivisch ist für eine möglichst gute Umwelt-bilanz des Gipsrecyclings in Deutschland die Etablierung einer höheren Zahl von Recyclinganlagen (ausgehend von den 2 Anlagen im Jahr 2016) für Gipskartonplatten sehr wichtig.
Das Recycling von Gipsabfällen wird schon seit einigen Jahren in unterschiedlichem Umfang in mehreren europäischen Ländern betrieben.Für die Verwertung der aufbereiteten RC-Gipse in der Gipsproduktion sind Qualitätsanforderungen festgelegt. Gipskartonplatten sind für die Herstellung von qualitativ hochwertigen RC-Gipsen besonders geeignet. Ein Forschungsprojekt im UFOPLAN des Umweltbundesamtes untersucht den aktuellen Stand des Gipsrecyclings in Deutschland und anderen europäischen Ländern und beleuchtet Hemmnisse und Maßnahmen zur Förderung des Gipsrecyclings in Deutschland. In einer umfassenden Ökobilanz wurden verschiedene Szenarien zur Gewinnung von RC-Gipsen bewertet. In dem Beitrag werden erste Ergebnisse dieses Projektes aufgezeigt.
Here, we show that calcium sulfate dihydrate (gypsum) can be directly, rapidly and reversibly converted to calcium sulfate hemihydrate (bassanite) in high salinity solutions (brines). The optimum conditions for the efficient production of bassanite in a short time (<5 min) involve the use of brines with c(NaCl) > 4 M and maintaining a temperature, T > 80 °C. When the solution containing bassanite crystals is cooled down to around room temperature, eventually gypsum is formed. When the temperature is raised again to T > 80 °C, bassanite is rapidly re-precipitated. This contrasts with the better-known behaviour of the bassanite phase in low-salt environments. In low-salinity aqueous solutions, bassanite is considered to be metastable with respect to gypsum and anhydrite, and therefore gypsum-to-bassanite conversion does not occur in pure water. Interestingly, the high-salinity transformation of gypsum-to-bassanite has been reported by many authors and used in practice for several decades, although its very occurrence actually contradicts numerical thermodynamic predictions regarding solubility of calcium sulfate phases. By following the evolution of crystalline phases with in situ and time-resolved X-ray diffraction/scattering and Raman spectroscopy, we demonstrated that the phase stability in brines at elevated temperatures was inaccurately represented in the thermodynamic databases. Most notably for c(NaCl) > 4 M, and T > 80 °C gypsum becomes readily more soluble than bassanite, which induces the direct precipitation of the latter from gypsum. The fact that these transformations are controlled by the solution provides extensive opportunities for precise manipulation of crystal formation. Our experiments confirmed that bassanite remained the sole crystalline phase for many hours before reverting into gypsum. This property is extremely advantageous for practical processing and efficient crystal extraction in industrial scenarios.