Filtern
Dokumenttyp
Sprache
- Englisch (3)
Referierte Publikation
- ja (3)
Schlagworte
- Accelerated test (1)
- Cement hydration (1)
- Corrosion inhibitor (1)
- Impact of DNA (1)
- Polyphosphate (1)
- Reinforced concrete (1)
- Retardation (1)
- Steel corrosion (1)
- Stray current (1)
- Superplasticizer (1)
Organisationseinheit der BAM
The retardation mechanism of cement hydration as imparted by the addition of polyphosphate comb superplasticizer to model cement containing C3S, C3A and calcium sulfate hemihydrate is studied using XRD, ss NMR and calorimetry. Our findings show the retardation effect caused by the direct addition of polyphosphate comb superplasticizer differs significantly to that of conventional polycarboxylate superplasticizers. Conversely to polycarboxylates, polyphosphates, at a low dosage, inhibits the silicate reaction without affecting the aluminate reaction and formation of ettringite. Yet, at high doses, both reactions are hampered, and the induction period extended, followed by accelerated aluminate and silicate reactions.
The current paper develops a novel accelerated corrosion test method based on Faraday’s law to investigate the performance of different inhibitors in reinforced concrete elements under electrical voltage. Using the proposed method two commercially available and three lab-made inhibitors were tested. Lab-made inhibitors based on potassium fluorosilicate and amine carboxylate showed the best performance over others. Furthermore, it is found that under an electrical potential environment beyond 3.6 V, the higher the concrete strength, the more efficient is the corrosion inhibition. Based on experimental results, a novel model describing the corrosion evolution in reinforced concrete was proposed.
Viscosity modifying agents (VMA) and superplasticizers (SP) are two common macromolecular admixture types for cementitious materials. VMAs are used to stabilize fresh cementitious materials, while SPs are used to disperse them. Most VMAs are bio-based polysaccharides that act in the water phase between particles; while most SPs are synthetic comb polymers, consisting of negatively charged backbones that help their adsorption to the cement particles' surface. The molecular structure of DNA contains elements of VMA – as it is a polysaccharide – and SP – as it is a polyanion. In this study, rheological measurements are used to compare how these three types of macromolecules (VMA, SP, and DNA) affect cementitious materials. It is found that DNA shows the combined effects of VMAs and SPs on cement paste: it lowers yield stress while at the same time maintaining or even increasing its viscosity, which permits reducing water content while avoiding bleeding or segregation of samples. Yet, the presence of DNA has a significant retardation impact on cement hydration, which is also a common side effect of VMAs and SPs.
