Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (2)
- Zeitschriftenartikel (1)
- Vortrag (1)
Referierte Publikation
- nein (4)
Schlagworte
- Aggregate (1)
- Alkali reactivity (1)
- Alkali-Kieselsäure-Reaktion (1)
- Alkali-silica reaction (1)
- Alkaliempfindlichkeit (1)
- Concrete Carbonation (1)
- Dissolution rate (1)
- FTIR-ATR Measurements (1)
- Gel-bound Colorants (1)
- Gesteinskörnung (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (1)
In general, pH-sensitive colorants such as phenolphthalein are applied on freshly split surfaces of building structures to determine the state of carbonation. For years, it has been known that the aerosols of phenolphthalein are suspected of being carcinogenic. Hence, more work has currently being done on alternative indicators for the use in research and the use on construction sites. Over the past years, mainly pH indicators from other research areas and natural dyes were investigated for their usability to cementitious systems. This paper presents the experimental results of using phenolphthalein solution bound in agar-agar gel. This gel-bound indicator allows the future use of the already known phenolphthalein dye without the health hazards for the user. To demonstrate the flexibility of the gel-bound colorant, different application forms of the indicator were carried out and assessed. In addition, the results obtained by the different methods were statistically evaluated to ensure validity.
The accuracy of the results was confirmed by thermogravimetric analysis and IR spectroscopic studies as reference methods. It has also succeeded to demonstrate the comparability of the results achieved by the gel-bound colorant with the results of the common sprayed application method. As an additional gain in knowledge, comparative results of indicator tests, TGA analysis, and FTIR investigation are shown.
Die schädigende Alkali-Kieselsäure-Reaktion (AKR) im Beton stellt in Teilbereichen nach wie vor ein Problem bei der Bewertung der Dauerhaftigkeit von Beton dar. Eine der häufigsten Fragestellungen ist immer noch eine schnelle und sichere Beurteilung der Alkaliempfindlichkeit von Gesteinskörnungen für die Betonherstellung. In der Präsentation wird gezeigt, welchen Beitrag die Gesteinskörnung zur AKR im Beton hat. Dabei wird die Alkaliempfindlichkeit von Gesteinskörnungen quantifiziert und die zu erwartende Schädigung des Betons durch die Gesteinskörnung detaillierter als bisher möglich klassifiziert. Im Vordergrund der Präsentation steht dabei das Verständnis der Auflösungsprozesse von Gesteinskörnungen in KOH-Lösungen (pH ≥ 13) bei unterschiedlichen Reaktionsbedingungen.
Anhand von Löseversuchen an den originalen Lieferkörnungen der Gesteinskörnungen bei 40 °C und mit 1,0 M KOH-Lösung ist es möglich, die Reaktivität der Gesteinskörnungen mit den ermittelten SiO2- und Al2O3-Konzentrationen der alkalischen Lösungen zu beschreiben. Durch eine erhöhte Temperatur von 80 °C und eine abgesenkte Konzentration der KOH-Lösung von 0,1 M können innerhalb von 56 Tagen vergleichbare Ergebnisse zu den Resultaten der Löseversuche bei 40 °C und 1,0 M KOH-Lösung erreicht werden.
In der alkalischen Lösung wird ein bestimmter Teil des gelösten SiO2 durch ebenfalls vorhandenes Al2O3 alumosilikatisch gebunden. Der verbleibende Teil des gelösten SiO2 steht für eine AKR zur Verfügung. Aus der zeitabhängigen Darstellung dieser SiO2-Konzentration wird die Lösegeschwindigkeit ermittelt. Dabei werden vier aufeinanderfolgende Phasen dem Dehnungs- und Rissbreitenverlauf der Probekörper des 40 °C-Betonversuchs zugeordnet. Zur Beurteilung der Alkaliempfindlichkeit einer Gesteinskörnung sind die Lösegeschwindigkeiten der letzten drei Phasen entscheidend.
Die Methode bietet eine Möglichkeit, die Alkaliempfindlichkeit einer Gesteinskörnung schnell, sicher und genauer als bisher zu bestimmen. Besonders vorteilhaft sind dabei die direkte Prüfung der Gesteinskörnung an der originalen Korngröße (Lieferkörnung), die zementunabhängige Prüfung, sowie die einfache experimentelle Durchführung und Auswertung.
The knowledge of dissolution processes of aggregates and supplementary cementing materials (SCMs) in alkaline solutions can help to describe the expansion of concretes caused by alkali-silica reaction (ASR) and the effects to avoid ASR by using SCMs in more details. Therefore, dissolution experiments in alkaline solutions under different pH values and different temperatures were performed using aggregates in the original grain size and SCMs in different ratios. The concentrations of soluble silica and additionally alumina were determined by ICP-OES. The investigations showed that up to now the “best” conditions to explain the damage behavior of concrete structures are a pH value of 13 (e.g. 0.1 M KOH solution) and a temperature of 80 °C. The evaluation bases on the parameter “excess silica” which is calculated from the dissolved silica and alumina of the aggregates and the SCMs. It was demonstrated that SCMs reduce and sometimes stop the dissolution of aggregates. The efficiency of the SCMs depends on their amount and chemical composition.
The use of supplementary cementing materials (SCMs) added to concrete mixtures can avoid the alkali-silica reaction. Such materials have a wide range of composition and therefore the inhibition mechanisms can be very differently.
The effectiveness of SCMs which provide silica and alumina into the alkaline solution cannot only be explained by reducing the OH--concentration of the pore solution. From dissolution experiments in potassium hydroxide solutions, an interaction was noted between the aggregate and five SCMs via the alkaline solution. Under specific conditions, no silica is released from the aggregate grains.
Mineralogical investigations (XRD, SEM+EDX) of the grain surfaces confirm that quartz is the main source of silica. In the presence of alumina providing SCMs, the quartz dissolution is strongly reduced or even sometimes stopped. On surfaces of grains a very thin layer can be observed which is probably responsible for reduction or stopping of the silica dissolution and therefore for the inhibition of ASR.