Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (18)
- Beitrag zu einem Tagungsband (8)
- Sonstiges (1)
- Forschungsbericht (1)
Schlagworte
- LTCC (13)
- Ferrite (6)
- Co-firing (4)
- XPS (3)
- Coefficient of thermal expansion (CTE) (2)
- Cofiring (2)
- Datenmanagement (2)
- Inclusions (2)
- Modeling (2)
- NEXAFS (2)
- Shrinkage (2)
- Sintering (2)
- Strain gauge (2)
- Thin-film substrate (2)
- 2D (1)
- 2D Materials (1)
- AFM (1)
- Aggregation (1)
- Azoverbindungen (1)
- Bifunctional 2D nanomaterials (1)
- Big Data (1)
- Calcium peroxide (1)
- Capacitor (1)
- Ceramics (1)
- Constrained sintering (1)
- Dental (1)
- Dielectric materials (1)
- Digitalisierung (1)
- EOS (1)
- EPMA (1)
- Electroceramics (1)
- Ferrite integration (1)
- Ferrites (1)
- Fertigungsprozess (1)
- Fracture toughness (1)
- Glas Matrix Composites (1)
- Glass matrix composites (1)
- Graphene (1)
- Graphene oxide (1)
- Graphene template (1)
- Grenzflächenreaktion (1)
- Hexagonal ferrites (1)
- IGUS (1)
- Integrated inductors (1)
- Interface (1)
- Keramik (1)
- Keramische Multilayer (1)
- LTCC modules (1)
- Micro-XRF (1)
- Microfocus x-ray source (1)
- Multilayer (1)
- Multilayer ceramic technology (1)
- Multilayer inductors (1)
- Multivalency (1)
- Nanostrukturen (1)
- New and emerging technologies and materials (1)
- Ni-Cu-Zn ferrites (1)
- Passive components and circuits (1)
- Permeability (1)
- Photochromie (1)
- Polyglycerol (1)
- Polymere (1)
- Power law (1)
- Pressure-assisted sintering (1)
- Round robin (1)
- SEM (1)
- Sensorik (1)
- Shrinkage behavior (1)
- Silver conductors (1)
- Silver diffusion (1)
- Sintering Kinetics (1)
- Sintering kinetics (1)
- Sodium nitrate (1)
- Sodium perborate monohydrate (1)
- Solid oxidizer test (1)
- Thick films (1)
- Transformer (1)
- Triazine (1)
- United Nations (1)
- Virus inhibition (1)
- Windenergie (1)
- X-ray-diffraction (1)
- Zirconia (1)
Organisationseinheit der BAM
Scanning electron microscopes are usually equipped with energy-dispersive X-ray detectors for electron probe microanalysis. This widespread analytical method allows investigators to determine the elemental composition of specimens with a spatial resolution of about 1 µm. However, owing to the electron-specimen interaction, the emitted spectra reveal, in addition to characteristic lines, also a high level of continuous bremsstrahlung background. As a result, elements with low concentrations cannot be identified. The minimum detection limit can be diminished by two orders of magnitude if the characteristic lines are excited as fluorescence by an additional x-ray source. In this case, the emergence of bremsstrahlung is considerably reduced. Combining a high-brilliance microfocus x-ray tube with efficient polycapillary optics enables one to realize an experimental arrangement for performing local fluorescence analysis at the same point where the electron beam hits the sample. The polycapillary optics under consideration focuses the emitted x-radiation onto focal spots between 30 and 100 µm in diameter. Count rates of several thousands cps have been achieved. Elemental maps have been obtained by means of the motorized specimen stage of the microscope. Copyright © 2005 John Wiley & Sons, Ltd.
We studied sintering of LTCC-type glass matrix composites (GMCs) consisting of small glass and alumina particles of equal size. Primarily, crystals act as rigid inclusions, decelerating the densification rate. In later stages, they also dissolve, partially increasing the viscosity. Release of alumina finally induces crystallization of alumosilicates, which enables post-firing stability. To study both effects, two model GMCs were prepared: an α-Al2O3 + barium alumoborosilicate glass (BABS)GMC, which shows neither significant dissolution nor crystallization, and an α-Al2O3 + calcium alumoborosilicate glass (CABS)GMC, which dissolves readily and promotes crystallization. The kinetics of shrinkage for both GMC were modeled by utilizing Frenkel theory for the early stage and MackenzieShuttleworth theory for the late stage, assuming that sintering is superimposed by the weighted contributions of triparticle glasscrystal clusters, their random occurrence (ideal mixing), and a shrinkage rate controlled by the GMC effective viscosity. In agreement with modeling, the experimental results showed that the shrinkage rate of BABSGMC decreases progressively for crystal volume fractions Φ > 0.15. The attainable shrinkage is reduced by up to 8% for Φ = 0.45. For the CABSGMC with Φ = 0.25, a reduction of Φ to 0.20 was evident due to partial α-Al2O3 dissolution. This effect was found able to increase the sintering temperature by ~5060 K.
LTCC-modules with integrated ferrite layers - Strategies for material development and co-sintering
(2008)
LTCC-Modules with integrated ferrite layers - Strategies for material development and co-sintering
(2009)
The integration of passive components (resistors, capacitors, inductors) into LTCC modules is a challenging task in multilayer ceramics technology. We report on multilayer assemblies consisting of combined layers of ferrite and dielectric LTCC tapes. Ni-Cu-Zn ferrites with maximum shrinkage at 900°C were processed to green tapes and laminated with dielectric LTCC tapes. Cosintering at 900°C led to multilayers with different defects such as incomplete densification of the ferrite layers, cracks, and warpage. Since ferrite tapes do not really allow compositional changes without deterioration of magnetic properties, the dielectric tape was modified with the following objectives: (i) matching of the shrinkage curves of dielectric and ferrite materials, (ii) adjusting the coefficients of thermal expansion to avoid cracking during cooling, and (iii) controlling of interface reactions. Using this concept we fabricated dense and defect-free multilayers consisting of dielectric and ferrite layers. However, compositional changes of the individual ferrite tapes require the development of a specific dielectric tape material with tailored properties.
Silver in LTCC - Interfacial reactions, transport processes and influence on properties of ceramics
(2009)
Integration of magnetic functional components in LTCC Circuit boards calls for co-firing of dielectric and ferrite tapes. Ni-Cu-Zn ferrites with permeability of p=900 were developed which can be fully densified at the Standard LTCC sintering temperature of 900 °C. Successful co-firing of this ferrite with dielectric tapes requires the adaptation of the shrinkage behavior of the materials as well as the thermal expansion during the cooling period - especially in the temperature range below the transformation point of the glassy phase of the dielectric tape. To match these preconditions, a new dielectric LTCC material with steep sintering curve and high thermal expansion coefficient was designed. Sintered multilayer composed of Ni-Cu-Zn ferrite and tailored dielectric tapes are free of cracks and possess no open porosity. No significant interdiffusion between the ferrite and dielectric tapes was found by EDX measurements. Compared to pure ferrite laminates the permeability of co-sintered Ni-Cu-Zn ferrite layers is drastically reduced to 400, i.e. a decrease of more than 50 %.
To investigate the origin of this permeability reduction, Ni-Cu-Zn ferrite laminates were sintered separately, and in combination with alumina release tapes or dielectric tapes, respectively. SEM and EDX analysis of co-fired laminates reveal differences in the ferrite grain growth behavior. Ferrite laminates with homogeneous microstructure and grain size up to 50 pm exhibit large permeability. However, growth of ferrite grains does not take place near the interface between ferrite and release or dielectric tapes. There is a strong correlation between high permeability and volume fraction of large ferrite grains. Regions of fine and coarse grains inside the ferrite layers show different bismuth concentration; the Bi-content is larger in regions of fine ferrite grains.
Synthetic molecular systems undergoing structure and property changes as a response to external stimuli offer a series of relevant functions. Their direct use in solution, immobilized at surfaces, or integrated into adequate matrices, allow for the elaboration of nano-carriers, molecular electronic memory circuits, adaptive systems, artificial muscles, or healable materials, among others. Reversible systems are commonly generated by utilizing molecular switches as responsive bi-stable molecules. Of particular interest are switches controlled by non-invasive triggers, especially light, which can display high spatial and temporal resolution. Photoswitches were used to change properties, such as conductance and basicity, based on light-induced alteration of the molecular geometry, that is, their dimensions and shape. In nature, light-induced geometrical modifications of molecular systems lead to primary biological functions, such as the visual perception in vertebrates, or proton pumping in some bacteria, two examples that nicely illustrate the potential of photo-inducing structural modifications in organic systems.