Filtern
Dokumenttyp
- Zeitschriftenartikel (13)
- Beitrag zu einem Sammelband (1)
- Vortrag (1)
- Posterpräsentation (1)
Sprache
- Englisch (14)
- Deutsch (1)
- Mehrsprachig (1)
Schlagworte
Eingeladener Vortrag
- nein (1)
The 57Fe-Moessbauer spectrum of (dmpipzH2)2[FeIII(H2O)2Cl4][FeIII Cl4]Cl2 (1) consists of two doublets caused by a strongly distorted octahedral and a non-distorted tetrahedral component. Both (dmpipzH2)[FeIIIBr4]2 (2) and (trienH2)[FeIIIBr4]Br (3) show only one doublet indicating a more strongly distorted iron(III) species for 2 and a less-distorted one in the case of 3. For all compounds investigated, the ESR spectra reveal the existence of ground states with predominant antiferromagnetic coupling. The Néel temperatures amount to <4.2 K for 1, 4 K for 3 and 48 K for 2. In the case of 2, both the Moessbauer and the ESR spectra reveal the formation of exchange-coupled {FeBr4} units which has been attributed to a significant cation influence. The fine structure of residual paramagnetic [FeBr4]- subunits remaining in the crystalline matrix could be directly determined. Temperature dependent AC and DC susceptibility measurements of 2 and 3 confirmed the results.
In this paper the factors which are responsible for precision and reliability of the experimental data are discussed. The detectors of different types are compared with respect to the precision of the final results. It is shown that the use of resonance detectors gives the best results in most cases of the Sn-119m Mössbauer spectroscopy. The estimation of spectral line distortion caused by a short distance between source and detector is presented. Different procedures of velocity scale calibration are discussed. It has to be underlined that Kuprijanov's method of the velocity scale calibration gives the most reliable and fast results.
PdSn catalysts prepared by various methods and used for nitrate reduction were investigated by means of in situ 119mSn Mössbauer spectroscopy. Characterization by 119mSn Mössbauer spectroscopy revealed significant differences concerning the modification of the palladium particles supported on alumina. The controlled surface reaction preparation method (CSR) leads to formation of PdSn alloys with different tin contents besides small amounts of Sn(II) species and unalloyed metallic Sn. On the other hand the impregnation method leads to a small amount of PdSn alloys and higher contents of Sn(II) species. Sn(IV) species were found in both kinds of catalysts. The CSR prepared PdSn catalysts showed an improved activity and selectivity compared to the catalysts obtained by the impregnation method.
Conventional simultaneous thermal analysis, capillary-coupled TGMS, in situ and ex situ Raman and Mössbauer spectroscopy, as well as chemical analysis have been used for the investigation of the first decomposition step of the mixed valence chloroferrate (dmpipzH2)6[Fe(II)Cl4]2[Fe(III)Cl4]2[Fe(II)Cl5][Fe(III)Cl6]. Under argon at ca. 200°C, an almost complete reduction proceeds in a solid state reaction forming Fe(II). It is accompanied by the release of HCl and, to a minor degree, carbon containing species. A multi-phase product with at least two chloroferrate species, coke, and C,H,N-containing polymers is formed. Binuclear iron complexes, such as (dmpipzH)2[Fe(II)2Cl6], and small amounts of (dmpipzH)[Fe(III)Cl4] have been proposed to be the major and minor component of the product mixture, respectively.
Characterization of the microstructure of high-chromium cast irons using Mössbauer spectroscopy
(2001)
The finish grinding process for cement materials uses ball mills with differently sized grinding balls. Because the grinding takes place through the impact and friction of the balls, balls with a high wear resistance are desirable and the materials of choice are the high-chromium white cast irons. This article examines the behavior of these cast irons when subjected to various heat treatments. The emphasis is on the dependence of the microstructure properties on the chemical composition of the alloys and the heat treatment parameters. The content of retained austenite and that of carbon in the martensite phase were determined by the use of Mössbauer spectroscopy. The results verify that a higher proportion of retained austenite with low carbon content and a martensite with higher hardness produce a material with good fracture toughness and resistance to abrasive wear.
Aluminas with Fe2O3 particles finely divided in the Al2O3 matrix were prepared via a crystalline precursor derived from ammonium dawsonite and its calcination. The precursors with Fe content between 1 and 10 wt% were synthesized by reaction of ammonium hydrogen carbonate with mixtures containing aluminium ammonium sulfate and ferric ammonium sulfate. The characterization of the as-synthesized and calcined products by chemical analysis, XRD, EPR, Mössbauer, TEM and adsorption measurements shows that all the Fe3+ ions are incorporated into the structure of dawsonite when the Fe content is low and that the calcined materials with micropores and mesopores (maximum 3040 Å) also contain very small Fe2O3 particles (<10 nm) at higher Fe contents.