Filtern
Dokumenttyp
Schlagworte
- Arc welding (1)
- Carbon Steels (1)
- Carbon steels (1)
- Combined processes (1)
- Fibre lasers (1)
- GMA welding (1)
- Gas shielded arc welding (1)
- Hybrid Welding (1)
- Multi pass welding (1)
- Multirun welding (1)
The results of a collaborative research project on laser beam weldability of carbon steels of high sheet thickness are presented. That includes single and multiple pass welding of 16 mm and 20 mm thick plates, as well as the investigation of acceptable tolerances i.e. gap bridgeability and edge misalignment. For the welding experiments fibre lasers with 8 kW, 20 kW laser power and different GMAW-techniques were used in various applications. With the 20 kW fibre laser 16 mm plates could be welded with a single pass, 20 mm required a seam preparation or alternatively preheating of the material. For multi pass welding with 8 kW laser power a joint preparation with a single V-butt joint with a broad root face (Y-groove) was applied. The root pass was always welded with a hybrid process, the filler passes with a hybrid process as well as a GMAW process which produced the best results.
The results of a collaborative research project on laser beam weldability of carbon steels of
high sheet thickness are presented. That includes single and multiple pass welding of 16 mm
and 20 mm thick plates, as well as the investigation of acceptable tolerances i.e. gap
bridgeability and edge misalignment. For the welding experiments fibre lasers with 8 kW,
20 kW laser power and different MAG-techniques were used in various applications.
With the 20 kW fibre laser 16 mm plates could be welded with a single pass, 20 mm required
a seam preparation or alternatively preheating of the material. For multi pass welding with
8 kW laser power a joint preparation with a single V-butt joint with a broad root face (Ygroove)
was applied. The root pass was always welded with a hybrid process, the filler
passes with a hybrid process as well as a MAG process which produced the best results.
Laserstrahl-MSG-Hybridschweißen dicker Bleche aus Rohrleitungsstahl mit Faserlasern hoher Leistung
(2010)
In diesem Beitrag werden die Ergebnisse aus einem gemeinschaftlich durchgeführten Forschungsprojekt zur Schweißeignung unlegierter Stähle mit Laserstrahl- und Lichtbogenschweißverfahren vorgestellt. Es wurden Schweißversuche in Ein- sowie Mehrlagentechnik mit Blechdicken von 16, 20 und 28 mm durchgeführt sowie die Prozessgrenzen für die Spaltüberbrückbarkeit, den Kantenversatz und das Schweißen in Zwangspositionen untersucht. Für die Schweißversuche kamen Faserlaser mit Leistungen von 8, 20 und 30 kW in Verbindung mit einem MAG-Schweißprozess als Laserstrahl-MSG-Hybridschweißen zum Einsatz. Mit dem 30-kW-Faserlaser war es möglich, 28 mm dicke Bleche einlagig zu schweißen, jedoch besteht weiterer Forschungsbedarf, um Aussagen über die erreichbare Qualität treffen zu können. Bei 20 kW Laserstrahlleistung wurde zum einlagigen Schweißen von Blechen mit einer Dicke von 20 mm eine entsprechende Nahtvorbereitung benötigt, 16 mm dicke Bleche konnten dagegen ohne Vorbereitung der Naht im Stumpfstoß geschweißt werden. In der Mehrlagentechnik wurden mit dem 8-kW-Faserlaser 16 mm dicke Bleche vorbereitet mit einer Y-Naht geschweißt. Hierbei wurde die Wurzellage hybrid geschweißt, die Füll- und Decklagen mit einem reinen MAG-Prozess.