Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (35)
- Zeitschriftenartikel (32)
- Beitrag zu einem Tagungsband (32)
- Posterpräsentation (7)
- Beitrag zu einem Sammelband (6)
- Buchkapitel (3)
- Dissertation (1)
Sprache
- Englisch (67)
- Deutsch (47)
- Französisch (2)
Schlagworte
- Friction (28)
- Hydrogen (24)
- Wear (24)
- Polymers (14)
- Vacuum (12)
- Tribology (10)
- Cryogenic temperature (9)
- PEEK (9)
- Polymer composites (9)
- Vakuum (9)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (35)
Many new technologies are based on applications in extreme conditions, such as at low temperatures or in hydrogen environment. This involves new requirements on material properties, in particular regarding their operability and reliability. To fulfil this demand, the tribological behaviour of PTFE- and PEEK-matrix composites filled with carbon fibres were investigated at cryogenic temperatures and in hydrogen by means of surface analyses. For a better understanding of the tribological behaviour, and because of the temperature-dependent characteristics of polymer materials, thermal and mechanical properties of selected composites were initially investigated at low temperatures. Thermal shock experiments as well as cryo- and hydrogen treatments were carried out. Different coefficients of thermal expansion within the composite lead to debondings of particles, particularly in the case of PTFE materials. Tensile tests indicate that the YOUNG'S modulus increases at T= 77 K compared to room temperature. However, this improvement at low temperatures is moderate for PEEK composite which is already under its glass transition at room temperature. In the main investigation, tribological experiments were carried out at first at T= 77 K to observe the influence of the matrix, fillers and fibres on the material behaviour comparing to room temperature. The reduction of the friction coefficient and wear at low temperatures has been attributed to the low temperature properties of the polymer in particular due to the higher YOUNG'S modulus at T= 77 K. Whereas at room temperature friction and wear depend strongly of the CF content, the quantity of fillers and fibres does not have a significant effect on the tribological behaviour at low temperatures. At T= 77 K, the tribological behaviour of PTFE and PEEK composites is mainly influenced by the matrix. PEEK composites have a better tribological performance than PTFE materials especially regarding the wear resistance. Furthermore, the influence of the cryogenic medium was determined with experiments carried out in LN2 (T= 77 K), LH2 (T= 20 K) and LHe (T= 4.2 K), as well as in helium at T= 77 K and hydrogen at room temperature. The thermal properties of the cryogenic medium have a significant influence on the tribological performances of the composites. Due to the lower frictional heat at low sliding speed, the effect of low temperatures on the tribological behaviour of these composites was more clearly detected in this case, with a change in wear mechanism from mainly adhesive to more abrasive. Experiments in LN2 give the best friction and wear performance at low as well as at high sliding speed. The behaviour of these composites in LHe does not benefit from the low temperature properties of polymers due to the low heat of evaporation of LHe. The influence of hydrogen was particularly seen after the tribological experiments performed in LH2 on the surface of the disc. The reduction effect of hydrogen may have an influence on the tribochemical reactions which appear during sliding, enhancing the formation of iron fluorides, but no influence of the metal fluorides on the tribological performance could be determined in this study.
This paper presents investigations on the tribological behaviour of PTFE composites against steel at cryogenic temperatures. The results showed that the friction coefficient decreases with temperature down to 77 K, but did not follow a linear evolution further down to extreme low temperatures. It can be stated that the cryogenic environment has a significant influence on the tribological performance of the polymer composites. The effect of low temperatures was more clearly detected at low sliding speed, where friction heat is reduced. A change in wear mechanism from adhesive to abrasive was observed in this case. SEM and AFM analyses showed that the PTFE matrix composites investigated under these experimental conditions have transferred material onto the disc down to very low temperatures. Chemical analyses indicate the presence of iron fluorides.
Tribologisches Verhalten der Werkstoffpaarung Polymerverbundwerkstoff/Stahl bei tiefen Temperaturen
(2003)